Related
After I upgrades the new WWE ROM , When I finished, I hard reset my device, and my atom exec stuck at O2 screen , I tried to go to bootloader to install again but I could not , it go until preparing to install the new rom, it notice that the connection errors, usb transfer fail, please use DSUU in OS mode and sync with PC first.
I thought maybe I still kept the mini SD card in the side when I hard reset so it caused this error.
Can anyone help me fix this ?!
Thnks & Brgds
An Huynh
an-huynh said:
After I upgrades the new WWE ROM , When I finished, I hard reset my device, and my atom exec stuck at O2 screen , I tried to go to bootloader to install again but I could not , it go until preparing to install the new rom, it notice that the connection errors, usb transfer fail, please use DSUU in OS mode and sync with PC first.
I thought maybe I still kept the mini SD card in the side when I hard reset so it caused this error.
Can anyone help me fix this ?!
Thnks & Brgds
An Huynh
Click to expand...
Click to collapse
I think I met someting wrong in bootloader file, Could anyone help me and send me the origin Atom exec ROM file (not the latest file). I think I should get these files to up load bootloader again.
Rgds
An-huynh
hi, i have something similar to above problem,,
my O2 Xda Exec, showing white screen after O2 screen.
this problm started,when i tried arabizer (arabizer13bn257)
pl, help
rgds
Your atom exec lost its extROM.
http://forum.xda-developers.com/showthread.php?t=292115
This problem is also present in the Atom - and if you're getting that message, it means your bootloader has been updated to NOT allow flashing directly from it (thanks, Quanta).
I can't help you with reflashing the BL (you may want to do a search on these boards tho), but try this: turn the device on and leave it for awhile (say 10+ mins), and see if you can get into the Today Screen at least. If you can, simply sync as guest on your PC, then run the DSUU updater. I saved my hacked Atom (using the Exec rom) this way.
If you can't - then I think it's time to call in a warranty.
Ultimate Chicken said:
Your atom exec lost its extROM.
http://forum.xda-developers.com/showthread.php?t=292115
This problem is also present in the Atom - and if you're getting that message, it means your bootloader has been updated to NOT allow flashing directly from it (thanks, Quanta).
I can't help you with reflashing the BL (you may want to do a search on these boards tho), but try this: turn the device on and leave it for awhile (say 10+ mins), and see if you can get into the Today Screen at least. If you can, simply sync as guest on your PC, then run the DSUU updater. I saved my hacked Atom (using the Exec rom) this way.
If you can't - then I think it's time to call in a warranty.
Click to expand...
Click to collapse
I left it for more than 15 minute but nothing happens.
I think the same to you. but i see it can read & execute from mini SD card.
Does anyone can help me ? Which file of bootload that I can execute directly from mini SD card ?
Rgds
An Huynh
Anyone can help me ?! Please !!!
Rgds
An Huynh
Have you tried taking out the battery? This happen to me once a month, and when I took the battery off and then turn it on again it oasses the O2 Screen and continues with the Windows Screen.
ozamalloa said:
Have you tried taking out the battery? This happen to me once a month, and when I took the battery off and then turn it on again it oasses the O2 Screen and continues with the Windows Screen.
Click to expand...
Click to collapse
I tried all things like this ! Still cannot ! Anyones can help me how to install it from the mini SD Card ?! I think we can recover from mini SD card but don't know what kind software to but in this mini SD to do this !
Rgds
An Huynh
an-huynh said:
I tried all things like this ! Still cannot ! Anyones can help me how to install it from the mini SD Card ?! I think we can recover from mini SD card but don't know what kind software to but in this mini SD to do this !
Rgds
An Huynh
Click to expand...
Click to collapse
Can anyone help me ????
Rgds
An Huynh
I have the same problem now
I've got the same problem with my ATOM.
Anyone help us plz??
i have same problem too, whenever i start my atom exec it directly goes to MN2 bootloader, i tried rom update but it asks me to run it in OS mode which i can't do as my device never goes past the bootloader. i have read of a miniSD card method to try upgrade but this bricked the atom in all cases i read.
Please we need a solution for this, my atom's warranty is over
Hello All
my work has 100 mda vario's
but they all had windows mobile 5.1 on it
so i say to my boss i can flash it to windows mobile 6 with htc touchflo
he liked it so he let me do it
but it goes wrong
the mda vario does nothing anymore
just a bootloader cames up with : red green,blue,white
saying :
ipl 2.21.0001
spl 2.21.001
my idea is to get a working rom on a mini sd card and flash it from the sd card
but how to let the sd card starts load and let it flash,
not one button works in the bootloader
i have tried a lot of tricks i also have one time get restore to factory defaults.
but wont work, it says format completed, so no error's
thats good i think
but i really need to fix it.
otherwise my boss wont be happy
also active sync wont work anymore , the pc wont see the phone all .exe updates ultilty gives me errors that they dont get response from the phone
that comes because it only stays in the bootloader and the bootloaders has left under a usb sign, there stood usb
can this be fixed?
any help plz
Regards
R.G
hi there... 2 bad is the boss phone!!!
hi there... 2 bad is the boss phone!!!
first of all, try a hard reset, then plug once again the phone to PC
dont worry, activesync wont recognize phone at all (is just usb connection)
tell me if hard reset worked, and ill keep in touch
i kpnw there is a tool that would help you to fix the phone.... first try the hard reset!
Good luck
I got the same problem, the hard reset works, but the problem is there yet.
Ich hab das gleiche Problem, der Hard reset funktioniert, das Problem besteht jedoch weiterhin
Hello All
Thanks for u responses i like that
okay hard reset works
but nothing has changed by that
hard reset is the question with restore to factory defaults?
and than i get a screen with format complete.
Regards
R.G
hello All
i fixed it
i know get a green screen with ipl,spl, os
but everything is terrible slow
really slow i mean when i press start it takes a minute to show up
why is this?
plz help
i fixed it with abort all processes in task manager and use wizard love rom.
this is the only possible way i think
regards
R.G
R.G
You know what you did,whats wrong with the phone,you flashed a wm6 rom to a CID locked device.A CID locked phone cannot be upgraded to wm6,you must have a CID unlocked device for upgrading to wm6.
Now,as its a G4 device,it cannot be CID unlocked,but,however,it can be upgraded to wm6 through either SoftSPL or HardSPL method.
Now first recover back to its default status by downloading official stock rom and flash it,after it starts to work normal,then follow the SoftSPL or HardSPL method,only then it'll upgrade.
i have htc p3400i windows 6 i never flashed ROM on my phone......last night i changed sim card than my mobile hanged..i did soft reset .....but after that my phone stuck at htc splash screen .....hard reset is also not working.....now i m thinking of flashing ROM but i understand how can i patch olipro SPL bcoz my phone is not working.....should i start directly with ROM upgrading...without patching my phone???? plz help help.....
then u will have your phone to the service center.dont even think about flashing rom without patching...try hard reset by holding twosoft keys and restart ab
nd press send button.also try your without mmc and with another sim
priyesh88 said:
i have htc p3400i windows 6 i never flashed ROM on my phone......last night i changed sim card than my mobile hanged..i did soft reset .....but after that my phone stuck at htc splash screen .....hard reset is also not working.....now i m thinking of flashing ROM but i understand how can i patch olipro SPL bcoz my phone is not working.....should i start directly with ROM upgrading...without patching my phone???? plz help help.....
Click to expand...
Click to collapse
go to your nearest RT OUTSOURCING station(HTC Service centre) and get it repaired for free.i guess ur phone is in warranty.they wont charge u anything.i faced the same problem a year back while installing blackberry support to my new gene.(P3400i)this is the safest thing u can do.
last night i tried to flash my phone.....but there was (240) Error...so its really time to take phone to service center....anyway...thanks guys for help..
Solution is found, I'm closing this thread,
12
hi lol
errrrrrmm
i tried updating my htc athena/ameo but it got stuck in the boatloader screen n i tried hard resetting which didnt work n i sent it to the company to fix but they were charging £350 something n i aint ready to pay dat so can anyone please help me with how i can get my phone back to normal ??
this comes on when i switch it on
ATHE100
1PL-v2. 01
ATHE100
SPL-v1. 06. 0000
please help ?
thanks
if you are in bootloader, try to flash your device with a rom (spl1.2)
flash your athena with memmory card
about flashing
sorry but this is abit hard when i dont know much about the whole flashing thing , can u explain please
Here you have complete tutorial for flashing with SD card http://wiki.xda-developers.com/index.php?pagename=HTC_Athena. Basically you got to have slow SD card rename xxx.nbh file to ATHEIMG.nbh and copy the file on the card. Insert SD card in athena remove sim card and hard reset the athena (camera button and reset). Then you will see flashing gray screen. USE THE ROM YOU HAVE ON YOUR DEVICE. if you flash your device with rom for spl3.5 you will loose device ID and have a lot of problems (i had them )
lilp399 said:
sorry but this is abit hard when i dont know much about the whole flashing thing , can u explain please
Click to expand...
Click to collapse
Reading the wiki for Athena will help you better understand flashing. You can also contact OliPro or Cmonex as they are the most experienced former Athena team members. If you want to send me a pm, I may be alble to help you offline from the forum in an msn chat session or equivalent.
hi friends,
i have a htc dual touch with french language ,
i want to change the language to english ..
first i treid to do hard spl (getting error , not starting)SPL_1160000_Ship.exe
ps help me...
the info is
NIKI 100
SPL-10.16.0000
CPL4D
AND THE VERSION IS 131.71.09.........
and i have run the file
1."RUU_****_HTC_WWE_11340501_Radi.exe"
2.RUU_****_HTCASIA_AUS_13171012_.exe
3.RUU_****_HTC_WWE_2094051_Radio.exe
and the hard spl file "hardspl-1.22-****-shipped.zip"
but getting error
pls help me
info:
NIKI 100
SPL-1.16.0000
CPL4D
radio version:1.31.71.09
AND 1.58.16.27
* (1) i have tried with many rom file ... but its not starting(0%).. ,
(2i) ts starting in 1 or 2 file , but only run upto 1% and getting error
( 264, 294)
* i think the havent any network lock(country lock).. itw working with
all sim..
* I tried by pasting the "sspl-1.16-nike.exe" in phone , but same...
* i tried by repalcing the .nbh file as NIKEIMG.nbh and paste it in
mmc card after format ,but it is stuck on "LOADING"
*i tried to put the "spl-1.16-nike.exe" and NIKEIMG.nbh in mmc card
, then its not starting , stuck on the rainbow window...
some files are
1.ROMUpdateUtility.exe
2.hardspl-1.22-nike-shipped.zip
3.RUU_Nike_Radio_1581627_2561300.exe
4.Hard-SPL-Neon.zip
5.-HTC_Touch_Dual-HTC_P5520_ARA_1.31.415.15_1.58.21.24_Ship.rar
6.Niki-SuperCID-Security-Unlocke.rar
7.SPL_1160000_Ship.exe
8.hardspl-1.15mfg-nike.zip
9.sspl-1.16-nike.zip
pls help me
thanks in advance
can anybody tell me why its not starting even the hard spl??
ameerali19 said:
can anybody tell me why its not starting even the hard spl??
Click to expand...
Click to collapse
Sorry buddy, but you don't have hardspl and that is your problem, so you have to do the hardspl again.
Succes
sir
i have tried with these hrad spl files....
1.hardspl-1.15mfg-nike.zip
2.flash-hardspl-niki.zip
3.Hard-SPL-Neon.zip
4.hardspl-1.22-nike-shipped.zip
if i am wrong can you give me a good /working hard spl??
or how can i cid unlocikmthe phone(i dont know the phone is cid licked or not)
thanks in advance
Hi buddy, try this
1. Copy the sspl 1.16 to your phone.
2. Turned the phone off.
3. Removed sim and sd-card
4. Turn on the phone and launched sspl 1.16
5. Connect on computer and usb appears.
6. Running hardspl 1.22
Greetz,
i have already tried the procedure...
but getting error while click on hard spl... in file explorer(mobile)...
thanks for your reply
pls help me
ameerali19 said:
i have already tried the procedure...
but getting error while click on hard spl... in file explorer(mobile)...
thanks for your reply
pls help me
Click to expand...
Click to collapse
You have to flash the hardspl from your computer (same procedure as flashing a rom) while your phone is conncted to your computer and not try to run or launched it from your phone.
Greetz,
now its running suddenly to 100% and geting the error(244)
i have tried with the file
hardspl-1.15mfg-nike.zip
and
Hard-SPL-Neon.zip
pls help me
thanks in advance
Just do as I wrote above and don't try to use another Hardspl which is not ment for your device, because error 244 means that you have used the wrong RUU to do the upgrade.
If you have trouble's to flash the hardspl 1.22 just do it from the bootloader to get in the bootloader is turn your device off and turn it on while pressing the on/off button and the camera button on the same time.
Now you are in the bootloader (it's a 4-coloured screen with some text) connect your phone on your computer, phone must stay in bootloader and then flash Hardspl 1.22 from your computer.
That will do the trick.
Greetz,
sir
i have tried with hardspl-1.22-nike-shipped (1).zip
but not starting(0%).........................
and at last getting error ...
pls helpme
thanks in advance
run sspl1.16 on phone
disconnect USB cable
kill Active sync (or disable AS USB connections)
connect USB cable
run hspl 1.22
it must work...
or go to friend and do it on his computer...
ameerali19 said:
info:
NIKI 100
SPL-1.16.0000
CPL4D
radio version:1.31.71.09
AND 1.58.16.27
* (1) i have tried with many rom file ... but its not starting(0%).. ,
(2i) ts starting in 1 or 2 file , but only run upto 1% and getting error
( 264, 294)
* i think the havent any network lock(country lock).. itw working with
all sim..
* I tried by pasting the "sspl-1.16-nike.exe" in phone , but same...
* i tried by repalcing the .nbh file as NIKEIMG.nbh and paste it in
mmc card after format ,but it is stuck on "LOADING"
*i tried to put the "spl-1.16-nike.exe" and NIKEIMG.nbh in mmc card
, then its not starting , stuck on the rainbow window...
some files are
1.ROMUpdateUtility.exe
2.hardspl-1.22-nike-shipped.zip
3.RUU_Nike_Radio_1581627_2561300.exe
4.Hard-SPL-Neon.zip
5.-HTC_Touch_Dual-HTC_P5520_ARA_1.31.415.15_1.58.21.24_Ship.rar
6.Niki-SuperCID-Security-Unlocke.rar
7.SPL_1160000_Ship.exe
8.hardspl-1.15mfg-nike.zip
9.sspl-1.16-nike.zip
pls help me
thanks in advance
Click to expand...
Click to collapse
my phone niki touch dual cannot run sspl-1.16-nike.
when turns to 3 color then stop. pls help
addgsm said:
my phone niki touch dual cannot run sspl-1.16-nike.
when turns to 3 color then stop. pls help
Click to expand...
Click to collapse
Send me a pm and I'm gonna try to help you
Greetz
ameerali19 said:
sir
i have tried with hardspl-1.22-nike-shipped (1).zip
but not starting(0%).........................
and at last getting error ...
pls helpme
thanks in advance
Click to expand...
Click to collapse
i have same Problem ......
any other idea ?
Thanks.
denva said:
i have same Problem ......
any other idea ?
Thanks.
Click to expand...
Click to collapse
Hi denva, try it this way http://forum.xda-developers.com/showpost.php?p=11218363&postcount=701
Greetz,