i have htc p3400i windows 6 i never flashed ROM on my phone......last night i changed sim card than my mobile hanged..i did soft reset .....but after that my phone stuck at htc splash screen .....hard reset is also not working.....now i m thinking of flashing ROM but i understand how can i patch olipro SPL bcoz my phone is not working.....should i start directly with ROM upgrading...without patching my phone???? plz help help.....
then u will have your phone to the service center.dont even think about flashing rom without patching...try hard reset by holding twosoft keys and restart ab
nd press send button.also try your without mmc and with another sim
priyesh88 said:
i have htc p3400i windows 6 i never flashed ROM on my phone......last night i changed sim card than my mobile hanged..i did soft reset .....but after that my phone stuck at htc splash screen .....hard reset is also not working.....now i m thinking of flashing ROM but i understand how can i patch olipro SPL bcoz my phone is not working.....should i start directly with ROM upgrading...without patching my phone???? plz help help.....
Click to expand...
Click to collapse
go to your nearest RT OUTSOURCING station(HTC Service centre) and get it repaired for free.i guess ur phone is in warranty.they wont charge u anything.i faced the same problem a year back while installing blackberry support to my new gene.(P3400i)this is the safest thing u can do.
last night i tried to flash my phone.....but there was (240) Error...so its really time to take phone to service center....anyway...thanks guys for help..
Solution is found, I'm closing this thread,
12
Related
my himalya automatically rose frm dead..but it was Jus showin the splash Screen..so i decided it Flash it
i put it into the bootloader mode n started flashing
but i encountered a Error during upgrading the radio ROm
This is wat i saw in the RUULlog.log file
18:21:55 Connection with USB
18:22:29 Begin Stage 4
18:22:59 Radio Erase retry 1
18:23:29 Radio Erase retry 2
18:23:59 Radio Erase retry 3
now there is a splash screen n there it shows 'NO GSM' but i ttried flashing wit a Differnt rom but no Luck please Help me
Please help me my himalaya is dead since more than a week
you may send more info
like what rom was befoure and what rom are you trying to put in
with that i can try to help a litle bit
hope never dies just me......
Re: you may send more info
rictec said:
like what rom was befoure and what rom are you trying to put in
with that i can try to help a litle bit
hope never dies just me......
Click to expand...
Click to collapse
my himalaya was on original rom ..then i tried installing 1.66 version i also tried wm2005 but no differnce .. the radio version cudnt b eearased ..it was givin me an error as Quoted above..i guess i hve to give it to the service center only (
hi guys..
i hav a gene 100 or a p3400..
it went dead two days back as i was listening to music..i charged it up again but it just didnt start.. When i press the power button, the green light lights up and nothing else happens...
PLLLLSSSSS help......
gene
the gene doesnt even repond to the resets mentioned in the forum..
pls help me with any software or smthing..
plsss...
dead GENE- TRY THIS
We can hard reset the device just by pressing and holding both the " -" keys right above the answer and end keys and pressing the power button . It will run the ghost image and recover the device ...
note :
1) make sure your battery is more than 50 % charged .
2)you must do a power cycle in your device ( take out the battery , then press and hold the power button ) before you do a hard reset ...
My device is back to normal...
video is here
there you go http://www.youtube.com/watch?v=R53104JTgNI
Tried it once...
hi bryan..
thnkx for ya reply but i'v already done that but got no responce..
Can i fix it by flashing or smthin??.. i'm new to these things ...
Can you explain to me ... to what extend the device is screwd.....
Another P3400i bricked
I tried olipro spl on my p3400i and the screen went black.
later on i managed to get it to bootloader mode showing Olipro spl but unable to flash any rom everytime i have same error 300 'get newer update utility '
i tried mtty,htcflasher,hard reset without powering on but nothing works.
phone is stuck at bootloader screen .
help please
its isnt startin up
hi bryan..
Once i put he batery and switch the device on,the green led lightsup and staysthere until i remove the battery..( all this tym the device screen is black..)
the red led lights up when i connect it to my pc..
What are my options??..
shahabaz said:
hi bryan..
Once i put he batery and switch the device on,the green led lightsup and staysthere until i remove the battery..( all this tym the device screen is black..)
the red led lights up when i connect it to my pc..
What are my options??..
Click to expand...
Click to collapse
Your battery is finished. I started getting that when my charger got messed up and starts taking power out of the battery instead of putting it in. Take out the battery,put it back in, then plug it to your PC and leave it there for a while.
mailforkrishna said:
I tried olipro spl on my p3400i and the screen went black.
later on i managed to get it to bootloader mode showing Olipro spl but unable to flash any rom everytime i have same error 300 'get newer update utility '
i tried mtty,htcflasher,hard reset without powering on but nothing works.
phone is stuck at bootloader screen .
help please
Click to expand...
Click to collapse
If your s\n starts with 814 - there is no solution now
Daemon_Hell said:
If your s\n starts with 814 - there is no solution now
Click to expand...
Click to collapse
no it is HT816FW01645 is there any hope
i have the same
my ht807
is it repaired ?
the same problem for me.
s/n start with HT829
any solution to recover?
to all p3400i guys
you can do nothing.... i am also having the same problem..... only solution take it to a service centre and tell them to hard flash and reinstall the windows..... my p3400i is in the service centre right now... we cant flash p3400i .... i dont know why???
go4thoman said:
you can do nothing.... i am also having the same problem..... only solution take it to a service centre and tell them to hard flash and reinstall the windows..... my p3400i is in the service centre right now... we cant flash p3400i .... i dont know why???
Click to expand...
Click to collapse
I too had taken my P3400i to service center but they did no solution Motherboard has be changed ??
and it cost 75%of a new P3400i
mailforkrishna said:
I too had taken my P3400i to service center but they did no solution Motherboard has be changed ??
and it cost 75%of a new P3400i
Click to expand...
Click to collapse
try to hard reset it and get the boot loader and flash with it the stock rom for p3400i i will give the link soon. my friend did it for me. then i send it to bangloure service centre, now waiting for their reply. They said that if we try to flash it our warranty will be void..... dont know what to do now.......
GENE 100 dead (stuck on bootloader)
Same with me
After running orefcove gene hspl my gene is dead and It goes up to tricolor bootloader and hangs. Cannot do any rom upgrades (ERROR- invalid upgrade tool)
Now SPL is 1.10.Olip
Orefcove HSPL
http://forum.xda-developers.com/showpost.php?p=1847381&postcount=37
(please dont use this and you will end up with dead gene like mines)
I have Gene 100
S/N HT817
basha said:
Same with me
After running orefcove gene hspl my gene is dead and It goes up to tricolor bootloader and hangs. Cannot do any rom upgrades (ERROR- invalid upgrade tool)
Now SPL is 1.10.Olip
Orefcove HSPL
http://forum.xda-developers.com/showpost.php?p=1847381&postcount=37
(please dont use this and you will end up with dead gene like mines)
I have Gene 100
S/N HT817
Click to expand...
Click to collapse
If you have not completed 14 days after buying the device, just take it to HTC service center sying that your device is not booting. At least in my case, those guys couldn't figure out what is the cause (see how efficient they are ) and I got a replacement !
basha said:
Same with me
After running orefcove gene hspl my gene is dead and It goes up to tricolor bootloader and hangs. Cannot do any rom upgrades (ERROR- invalid upgrade tool)
Now SPL is 1.10.Olip
Orefcove HSPL
http://forum.xda-developers.com/showpost.php?p=1847381&postcount=37
(please dont use this and you will end up with dead gene like mines)
I have Gene 100
S/N HT817
Click to expand...
Click to collapse
I used the exact same HSPL ... and was able to upgrade to WM 6.1 ROM by cyan..
mGforCe said:
I used the exact same HSPL ... and was able to upgrade to WM 6.1 ROM by cyan..
Click to expand...
Click to collapse
What is your serial, is it P3400i
basha said:
What is your serial, is it P3400i
Click to expand...
Click to collapse
Nope... its P3400 which came with WM 5.
i upgrade p3400i with (HTC Gene - stock - 1.17.720 - ROM)
and now my Phone is Dead no red or green light
only when i press hard reset key with stylus the red and green key bilk at ones
plz help me
ankit360 said:
i upgrade p3400i with (HTC Gene - stock - 1.17.720 - ROM)
and now my Phone is Dead no red or green light
only when i press hard reset key with stylus the red and green key bilk at ones
plz help me
Click to expand...
Click to collapse
sorry to say its your mistake , you select the wrong Rom .
The 1.17.720 - ROM , its for p3400 not for p3400i
i dont have any solution for you,
maybe somebody can help you
thankx
sprite clone backup
i have taken backup of rom through sprite clone
can any body help me now
i was planning to run gene_hspl_HT8x.exe but it failed.
i am also wish to update rom but for that we need to remove spl hspl first as someone said that newer version are locked for rom update.
for more info on this talk you can see here
http://htc-android.com/viewtopic.php?f=5&t=64&sid=01547ccf0c90499d8f75f30018715da4
my phone is still running.
lots of people i think have 3400i now but this xda-developer forum has no info for this device.
i wish someone could start adding sub forum for this device so that newcomers like us get proper help to the things we do with our device.
regards
mak
india
?
hi atomicmak
i m from india also
can i send my phone to service centre ?
or go to shop and get it replace because it is only 2 day old
i've heared that sony people are doing servicing of htc and they are authorized service centers.
you can surely try to catch them and tell them you messed up with the phone and need recovery and i think they will be able to solve your issue with some money they charge.
hope this helps.
mital
Unbrick solution
Have you people really checked the following post?
http://forum.xda-developers.com/showthread.php?t=434349
ankit360 said:
hi atomicmak
i m from india also
can i send my phone to service centre ?
or go to shop and get it replace because it is only 2 day old
Click to expand...
Click to collapse
try pressing power key and camera button and press soft reset using stylus when you get into the boot loader try to flash with the stock ROM. Make sure that your SPL is changed to normal from orefklovs ... if the SPL is changed they will tell you that the warranty is void now. i got my board replaced after i flash with the stock ROM. which state are you living in? I think somebody has introduced an unbricker try that also..... my advice is dont do anything in excitement..... please study and research everything after that apply it in the phone....... gudluck.....
no man i try it but it not showing bootloader i think ipl is also damage
ankit360 said:
no man i try it but it not showing bootloader i think ipl is also damage
Click to expand...
Click to collapse
try again and again (press camera and power button together and soft reset with stylus) until you get into into the botloader screen... at once flash with original stock rom and make sure olipros SPL is changed to normal SPL.....it worked in my set... i dont know any details...
to http://www.dig-cn.com/forum-110-1.html
find the solution
to suchunjian
in that link i saw one spl mentioning that p3400i. is that really for the new gene. i dont know that language. if it is for the new gene then please inform all the gurus about it.
i upgrade p3400i with (GENE HARD SPL)
and now my Phone is Dead no red or green light
only when i press hard reset key with stylus the red and green key bilk at ones
plz help me
my gene dead :?(
i have same issue bcoz wrong flash i go to htc service crntre they repair it
if u don't have warranty use jtag method
P3400i is Dead HELP ME
y device Info
Serial No. - HTC8xxx
ONBL - 1.06.0000
SPL - 1.06.0000
The handset can only enter the safe mode, brushes any software to 2% to be defeated
thanks:
Closed as per OP Request.
Dave
My HTC is under the S/N : H7XXXXX, but accidentally use the H8XXXX to flash it. Now my HTC unable to start except press the "Camera" key and "Power" key to up my HTC, and it only shows the 3-color screen on it.
When I tried to use the original ROM "P3400 - 24 March 2007" to do the flash, but the upgrading fails and shows "Invalid Vendor ID".
Please help me on this. Thanks
Please advise on a solutions
I have the same serial number on my htc but mine i hardspl it with stock rom wm6.1. Tried the reflashing it and still don't wanna work.also tried the mmty program but it not work on my device
Time to visit the Docs. Sorry!
try changing the spl first... check the old posts for old gene..... man you have to do some reading b4 flashing...which spl its showing now is it oref or olpiro.. is it still detecting the Usb... showing at btm lft corner?
the one and only solution is to send the device to HTC service centre...
ther is also 2nd option,,,, if u flash ur device with stock WM5 version 1.7.455.2 WWE
but this ROM is nowhere available..
i hv faced exact same problem , which u r facing now....thn i tried almost every method...but nothing worked....thn finally i send device to HTC service center.....
next day they returned my device fully working again....
so........this is the only way for u now....!!!
bst of luck..
hi...
i hv HTC gene (HT8XX) (Old Gene)..
SPL 1.07.0000
ONBL 1.07.0000
right now i have stock WM5 Rom...
but last night i tried to flash WM6.1 fusion 9 Rom on my device..but
when i started RUU, everything was fine...but at last it showed
ERROR [300] INVALID UPDATE TOOL
history:
( previously i used same RUU to flash my phone....i was using Fusion 9.0 perfectly
but since i flashed wrong Rom so it bricked my phone....
than i gave my phone to HTC service center , they made it all right again..but they flashed stock WM5 ROM...
now i wanted to flash WM6.1 ROM but when i tried to flash than RUU showed this "ERROR [300] INVALID UPDATE TOOL" )
so....please tell me....what can i do to fix this problem ???
thanks in advance...!!! plzzz help
i think you are using wrong rom update utility...use the rom update utility that comes with the rom... and make sure that you are using the correct rom for old gene...which is your spl.
is it showing oref spl at tricolor screen then you must use jtag method......
go4thomman said:
i think you are using wrong rom update utility...use the rom update utility that comes with the rom... and make sure that you are using the correct rom for old gene...which is your spl.
Click to expand...
Click to collapse
dear.....i m using correct RUU as i used this RUU several times b4 i got my device bricked....
this problem is started after return of the phone from HTC service centre...
i hv tried almost all RUU which is available for gene..
and i also tried flashing almost 5-6 different roms...but same error all the time....i m using the same RUU which comes with ROM by default..
My SPL is 1.07.0000...
go4thomman said:
is it showing oref spl at tricolor screen then you must use jtag method......
Click to expand...
Click to collapse
i m using olipro method for hspl...
in which spl doesnt change...it just temporary unlocked for me..
it was working perfact for me...
i hv used almost every ROM available for OLD GENE..
but last time bcuz of flashing wrong ROM m device got bricked...
since than this problem started ..
go4thomman said:
is it showing oref spl at tricolor screen then you must use jtag method......
Click to expand...
Click to collapse
and..................i never got tricolor screen ....
whenever i hspl my device than phone reboots thn screen becomes white....thereafter...i used to flash ROM
everything is working well as usual upto white screen....
but at the time of flashing ROM RUU shows error....
hksin1988 said:
dear.....i m using correct RUU as i used this RUU several times b4 i got my device bricked....
this problem is started after return of the phone from HTC service centre...
i hv tried almost all RUU which is available for gene..
and i also tried flashing almost 5-6 different roms...but same error all the time....i m using the same RUU which comes with ROM by default..
My SPL is 1.07.0000...
Click to expand...
Click to collapse
Hey buddy, since you have given your ROM to HTC, they have again locked your CID, please go throught the stickey to how to flash again. Best of Luck
No Shaunak, there is something else wrong. He is saying that he tried to use the JumpSPL method. Its an alternative and temporary method to unlock CID for flashing ROM. HardSPL is different, it makes changes permanent.
Dear sksin
The phone is again bricked or you are currently using(able to boot) the wm5?
Dear hksin
Same problem i also have faced and finally i recovered it.
Please go through
1.The serial no. of the phone Is the sticker shows same S/N as before?
2.The HTC people has changed your IMEI No ?
If Yes then ,Now after comming from service centre your Gene has become the new Gene.
and you have to treate like this.
so do the gene unbricker solution by MTTY method and you may recover
All the best.Good luck!!!!
rkpatro said:
Dear sksin
The phone is again bricked or you are currently using(able to boot) the wm5?
Click to expand...
Click to collapse
dear..
I m currently Using the Phone With WM5 Stock
its not bricked and working perfactly..!!!
rkpatro said:
Dear hksin
Same problem i also have faced and finally i recovered it.
Please go through
1.The serial no. of the phone Is the sticker shows same S/N as before?
2.The HTC people has changed your IMEI No ?
If Yes then ,Now after comming from service centre your Gene has become the new Gene.
and you have to treate like this.
so do the gene unbricker solution by MTTY method and you may recover
All the best.Good luck!!!!
Click to expand...
Click to collapse
Dear rkpatro,
i hv checked IMEI no of phone ,,,its is same as previous..
and can u please tell me that how to check my phone's serial no. via phone only.
bcuz on the phone's box its serial no starts frm HT80XXX
but i found no way to check serial no frm the phone to confirm.
is ther any way ??
Remove the battery and you will be able to see the serial number. Please check the stickey by krazy. Now Old ROMs are appearing with 8xxx serial numbers!
Looking at your spl version, i could be wrong but I think yours is an old Gene
Addicted2xda said:
Remove the battery and you will be able to see the serial number. Please check the stickey by krazy. Now Old ROMs are appearing with 8xxx serial numbers!
Looking at your spl version, i could be wrong but I think yours is an old Gene
Click to expand...
Click to collapse
yeaa my phone has serial no starting form HT8XX
but it always works as old gene.
as before breaking my device , i almost flashed all the ROMs available for Old gene.
but mistakenly i flashed Krazy's Rom, cuz i thought tht my phone is also HT8XX
but later on i understood that my phone's SPL is 1.07.0000, which is for old gene..
anyhow my device became unbricked....but unable to flash the same Roms which i flashed in past...
so i m confused that wht is wrong with the device now..
i think that HTC guy has put some kinda Lock for flashing .. is that it ???
or is ther some other reason..
As dear rkpatro suggested that after returning from service center is has become new gene, but i am not satisfied with this . becuz everything is same as past time...
SPL n ONBL r also same as well as IMEI and serial no, even they flashed exact same ROM as it had previously..
so i m not getting that wht the problem is..
becuz everything is same , than y the Roms r not working..
i hv tried each Rom again which i was using in past...
but flashing ends up by error 300..
so guys,,,, please think something abt it...
ur attention to my problem is always appreciable....
thanks in advance..!!!
Yes, HTC has again cid locked your device, I think it should be better to get help from the krazy's sticky post on flashing a locked Gene.
Best of Luck
Black metal rom, p3401 can?
I'm having problems.
All the ROMS are giving p3401 error and my machine is only on screen color.
my SPL is 1.10. olip
someone can help me
rom or tell me what works?
Addicted2xda said:
Yes, HTC has again cid locked your device, I think it should be better to get help from the krazy's sticky post on flashing a locked Gene.
Best of Luck
Click to expand...
Click to collapse
Hi dear...
just wanna know.....that when i firstly flashed my device, than i used olipro's spl method
1.10-Olipro.nb
and Jump slp
that time my device was CID locked also, but i succesfully Flashed WM 6 Rom by this method/..
no error was ther..
now as u r sayin that its again CID locked.. so i followed exact same procedure as i followed for the first time....but this time i ended up with this strange error...
so....is ther any possibility of something else ???
solution ???????????????????????
Any Solution guys ??????????????????????????????????????????????????????
problem Solved...!!!
finally..............my problem has solved,,,,infact....my old gene has become new gene now....isnt it miracle...
nyways....even being onbl n spl 1.07.0000 originally....i successfully patched my device with hspl for new gene...and i installed Sumit's VanillaManila ROM ( for new gene)...
its working superb....thanks...!!!