Hey guys I have the current Android Revolution HD 30.4. However since I upgraded to 30.1 the phone has crashed every time after I get a phone call. When I did install it I did the wipe that was included with the ROM. I have the Samsung S3 International version. I do have the stock kernel and everything on it is stock except for the Android Revolution HD.
I get a call talk, then when I hang up it just crashes and restarts. When it restarts it is very slow. So I restart again and it seems to work fine.
I also noticed that my background is also having an error. The top smaller portion 1/6th or so fades to black at the top. The top notification bar is fine but under it it fades from black to grey to my background. I can fix this temporarily by resetting my background photo. This error doesn't happen on the lock screen, just the background.
Any help would be great. Thank you. I cannot post in the Android Revolution HD forum so I hope this is the right spot.
Thank you for posting in the Q&A section at least. The back ground fading from top bottom is a known issue/feature. We don't know yet. As for your calling and crashing issue. I don't know what could be causing that. It happens on every received call? All calls?
Sent from my GT-I9300 using xda premium
b-eock said:
Thank you for posting in the Q&A section at least. The back ground fading from top bottom is a known issue/feature. We don't know yet. As for your calling and crashing issue. I don't know what could be causing that. It happens on every received call? All calls?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Yes it seems to be all calls. I have had 3 people call me and each time it crashed.
Thanks for reply. I looked a bit for the fading but couldn't find much. I just kept finding all black backgrounds.
Android Revolution HD
is their not a Q&A thread for that rom ???
jje
JJEgan said:
Android Revolution HD
is their not a Q&A thread for that rom ???
jje
Click to expand...
Click to collapse
Only Q&A I found for it was for http://forum.xda-developers.com/showthread.php?t=1213158
Should I post in that thread even if the device is different?
All searches just pointed me back there or to download the rom.
In the android revolution main posts didn't see any Q&A links for questions either.
If you know it could you link it to me? I must be blind or searching wrong.
morinr said:
Only Q&A I found for it was for http://forum.xda-developers.com/showthread.php?t=1213158
Should I post in that thread even if the device is different?
No never /
My mistake its not a Q&A but a AHDR mod thread .
http://forum.xda-developers.com/showthread.php?t=2115596&highlight=android+revolution+hd
Click to expand...
Click to collapse
JJEgan said:
morinr said:
Only Q&A I found for it was for http://forum.xda-developers.com/showthread.php?t=1213158
Should I post in that thread even if the device is different?
No never /
My mistake its not a Q&A but a AHDR mod thread .
http://forum.xda-developers.com/showthread.php?t=2115596&highlight=android+revolution+hd
Click to expand...
Click to collapse
Ah, ok thanks. Ya I tried to search first and read the thread. But I didn't find anything. I think I actually will use some of those mods once I get the crashing issue fixed. I like to think im not a forum/computer idiot but I know nothing about phones.
Click to expand...
Click to collapse
Anybody have any ideas on how to fix this or anybody having similar issues with resetting?
Related
Now I verified this by going back to Eclair 2.1 ji6 a few times and have confirmed that the mic sensitivity is very low ONLY when you record a video and when you use VOICE recorder. Otherwise phone conversations the other party has had no problem hearing my voice.
Can other members try this please?
the mic sensitivity is normal when I downgrade to Eclair 2.1.
Bato Vukovic said:
Now I verified this by going back to Eclair 2.1 ji6 a few times and have confirmed that the mic sensitivity is very low ONLY when you record a video and when you use VOICE recorder. Otherwise phone conversations the other party has had no problem hearing my voice.
Can other members try this please?
the mic sensitivity is normal when I downgrade to Eclair 2.1.
Click to expand...
Click to collapse
Dude u are so right....i heard somebody else talking bout this somewhere....dont remember where tho.... Mine has no prob now...im usin axura 2.1 with jk6 modem....
Sent from my SGH-T959 using XDA App
wrong section bro.
try re-posting this in the Q&A section. maybe youll have better luck.
dirkyboy said:
wrong section bro.
try re-posting this in the Q&A section. maybe youll have better luck.
Click to expand...
Click to collapse
its not a question Bro, its an observation. I think its in the right section due to the fact that TW brought this rom here.
cheers.
Yeah, I can attest to this. I tried messing with service mode, the video recording with audio is better but still can't fix the volume on mic input.
Sent from my SGH-T959 using XDA App
I have the same problem, running macnut R13 + jk6 modem.
I had no problems on eclair 2.1
the mic is fine during phone calls but on apps that needs the mic such as voice commands (vlingo) or games such as talking tom it simply does not work well. you need to be very very close to the mic and it is still too weak
You're right about the reduced mic sensitivity on 2.2 roms. I recorded a video this post weekend and noticed how low the volume was.
- Mat
Sent from my SGH-T959 using XDA App
Bato Vukovic said:
Can other members try this please?
Click to expand...
Click to collapse
Bato Vukovic said:
its not a question Bro, its an observation. I think its in the right section due to the fact that TW brought this rom here.
cheers.
Click to expand...
Click to collapse
Not to reign in on your parade, but that is a question and it belongs in the Q&A section, not the development section. And if in fact it is a TeamWhiskey Rom, you could have posted this in that specific rom thread.
Hi,
The developers should be made aware of this.
This is a defect in the 2.2 roms.
I have also verified this on the unofficial 2.2. tmobile eugene port.
Recording volume with the mike is very low and unacceptable.
This will affect voice input functions as well as video recording.
Good find .
Hopefully it be be addressed.
And yes. it's not a question but a developmental problem and spans several roms so it does belong here.
djquick said:
Not to rain on your parade, but that is a question and it belongs in the Q&A section, not the development section. And if in fact it is a TeamWhiskey Rom, you could have posted this in that specific rom thread.
Click to expand...
Click to collapse
Fixed.
.
Haha!
Kdogg71 said:
Fixed.
.
Click to expand...
Click to collapse
Big ups for the correction. It's amazing how many people cannot spell correctly or use bad grammar, these days!
djquick said:
Not to reign in on your parade, but that is a question and it belongs in the Q&A section, not the development section. And if in fact it is a TeamWhiskey Rom, you could have posted this in that specific rom thread.
Click to expand...
Click to collapse
your dumb,
how are they gonna respond to that question? by saying yes I tried........
get lost.
P.S
I your read that thread you would have noticed that I posted there first.
jreed3786 said:
Big ups for the correction. It's amazing how many people cannot spell correctly or use bad grammar these days!
Click to expand...
Click to collapse
Fixed. Removed gramatically incorrect, superfluous ", " lol
Sent from my SGH-T959 using XDA App
bump on this, i confirmed it myself trying various roms im back on ji6 hoping the problem will get fixed
I just got an ATT SIII and I attempted to root it with Odin. The progress bar got to about 25% then failed, now I can't boot my phone into the OS. I followed every guide I could find to fix this but every flash fails at ~25%. I can get into download mode, so I should be able to correct this, right? What should I be doing?
edit:
Ok, I found this:
http://forum.xda-developers.com/showthread.php?t=1727443
I followed the steps, Odin passed, and when I boot I see the Galaxy S III splash screen, then the screen goes blank and the led stays solid blue. I can still get to download mode.
First of all get to the AT&T s3 forum this is for the i9300 only flashing anything here will brick your phone.
Sent from my GT-I9300 using xda premium
isn't it obvious that questions go in the Q&A forum?
Glebun said:
isn't it obvious that questions go in the Q&A forum?
Click to expand...
Click to collapse
For God's sake shut up and just report it for moving
Glebun said:
isn't it obvious that questions go in the Q&A forum?
Click to expand...
Click to collapse
Isn't it obvious your a wannabe mod? Just apply to be one if its this bad.
Sent from my GT-I9300 using xda premium
delsus said:
Isn't it obvious your a wannabe mod? Just apply to be one if its this bad.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
"you're" would be the correct grammar
nah man, I certainly don't want to be a mod. I am just surprised by people's thinking. Like "hey, here's the Q&A help and troubleshooting forum, should ask ask a question there? naah, imma just post in general". It's not even funny.
And I am perfectly fine if you don't like my posts, I don't care about that.
@OP: definitely it is (as mentioned before) Q&A thread, first.
Secondly, I would like to pass my personal congratulations to you, as you tried to flash the firmware form another phone and you have confirmed that it would brick it.
Last but not least: be careful and do not apply your way of life while refuelling your car, as diesel into petrol or vice versa would have more severe consequences.
Hey all,
I seem to have a weird problem with the accelerometer in my i9300. I've recently started using the CM10 nightlies, and I don't recall it happening before then - though the two things might not be related.
I've started to notice that the screen doesn't rotate when I tilt the phone in apps which support this feature (Chrome, Camera, etc.) - it just stays in portrait. Auto-rotate is switched on under settings / display, with all the modes enabled.
Having tried a couple of apps that test the accelerometers, it seems like one of them might not be working correctly. For example, using "Accelerometer Monitor", the X, Z and |V| (whatever that is!) stats seem fine, but Y seems to be stuck on 19.536 no matter how I twist or tilt the phone.
Has anyone else had similar problems? Is there a solution?
Thanks in advance!
monkeyhat.
another one ???
JJEgan said:
another one ???
Click to expand...
Click to collapse
Is this a common problem? I ran a search on the forum and couldn't find much about accelerometers, and it's not in the known issues for CM10.1. Sorry if this is a common post.
monkeyhat said:
Is this a common problem? I ran a search on the forum and couldn't find much about accelerometers, and it's not in the known issues for CM10.1. Sorry if this is a common post.
Click to expand...
Click to collapse
Sorry the posts was sent before finished .
It should have read another one posting in the wrong forum .
jje
this is not the forum for questions. look at the list and try to guess which one is
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Oops, sorry, had the General forum bookmarked and forgot to change.
i have the same problem....pls help us...
Make sure you did all the factory reset before flashing..
By the way,
Vote for GSIII for getting CM10.2 first than any phone..
Link at my signature.. :good:
i make several times hard reset , deep reset with no results. i change a lot of roms...make a downgrade to 4.04
nothing to do...the y axis is blocked
Sent from my GT-I9300 using xda app-developers app
ubiqland said:
i make several times hard reset , deep reset with no results. i change a lot of roms...make a downgrade to 4.04
nothing to do...the y axis is blocked
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Return to vendor for service it is a hardware fault .
jje
JJEgan said:
Return to vendor for service it is a hardware fault .
jje
Click to expand...
Click to collapse
Hi there
I am struggling to find some info regarding the stock messaging app. Does this app lag scrolling up and down through conversations? This is the problem I have, you can see the screen tearing while you scroll slowly up and down, which is horrible and no matter if I try to do a factory reset (using kies or flashing firmware with odin) the issue will not get fixed. I think Jellybean has broken this app.
Does everyone think the same? I am 90 percent sure that this did not happen on ICS? please heeelllpp
nanodroid said:
Hi there
I am struggling to find some info regarding the stock messaging app. Does this app lag scrolling up and down through conversations? This is the problem I have, you can see the screen tearing while you scroll slowly up and down, which is horrible and no matter if I try to do a factory reset (using kies or flashing firmware with odin) the issue will not get fixed. I think Jellybean has broken this app.
Does everyone think the same? I am 90 percent sure that this did not happen on ICS? please heeelllpp
Click to expand...
Click to collapse
You have to use another app. The stock one is laggy and long to open. Like the dialer.
Sent from my GT-I9300 using xda app-developers app
and you still don't know the difference between Q&A and General
Glebun said:
and you still don't know the difference between Q&A and General
Click to expand...
Click to collapse
So what, you got a problem with that? tell me a reason why not to post it on general. this does not involve any rom, apps or anything specific just the phone itself.
nanodroid said:
So what, you got a problem with that? tell me a reason why not to post it on general. this does not involve any rom, apps or anything specific just the phone itself.
Click to expand...
Click to collapse
yes, I do. The reason is that posting questions in general is against the rules, and people who understand what Q&A stands for post questions here.
Glebun said:
yes, I do. The reason is that posting questions in general is against the rules, and people who understand what Q&A stands for post questions here.
Click to expand...
Click to collapse
Well go and complain to moderators then because I have always used general sections for anything else not related to dev or bug reporting and never had a problem..
Now go and find something useful to do instead of crying mama..god.
I just wanted to discuss the issue regarding the ics and jellybean messaging.
nanodroid said:
I just wanted to discuss the issue regarding the ics and jellybean messaging.
Click to expand...
Click to collapse
I understand.
I do agree that the ICS messaging works faster than that of JB's. It is a stock thing, so I believe there is no fix yet? Tsk
Sent from my GT-I9300 using xda premium
So you did notice the ics app faster and smoother. I was really confused because there were 2 updates and I couldn't find out which one messed it up. I don't think there is a fix yet. I only asked Samsung and they told me to call the S3 support but I didn't.
I do believe there are going to be more updates for the S3 even another version of Android which hopefully will fix it. I did ask a few people but theu said their messaging app worked fine but I think they didn't notice what I meant or they wouldn't care too much.
You can install jkays framework on stock odexed Rom and then with his deluxe settings app (paid) you can lock dialler and contacts in memory,.......regarding the tearing whilst scrolling, this nearly always happens when you have an accumulation of too many messages I keep my inbox pretty clean and never experience any tearing
nanodroid said:
Well go and complain to moderators then
Click to expand...
Click to collapse
I have, that's why your thread got moved to the correct section.
Just read the rules and don't do it again.
Glebun said:
Just read the rules and don't do it again.
Click to expand...
Click to collapse
Yeah whatever..you have done your job won a trophy and all. That's what moderators are here for. If you don't have anything useful to post then don't post your trolling messages.
Slaphead: I am talking about a few mesaages not a huge list; I have tried a lot of things which will never work. Unfortunately have to live with it until Samsung releases an update I think they must be aware of this? I wonder if any of the developers around here knows what is the issue and if anyone has implemented a fix on any other roms.
Try this...go developer options and check "force gpu rendering"
and that's why xda is the way it is..noobs don't read the rules
Glebun said:
and that's why xda is the way it is..noobs don't read the rules
Click to expand...
Click to collapse
Yes this is why I hate xda there is always some stoopid who will always annoy you forever.now gtfo and leave this thread alone. Its good to try n help moderators but you are being an a $$ and disrespecting users!!!!
Slaphead this really worked I don't believe no one has managed to advise this to me on other sites..
Thanks a million
nanodroid said:
Slaphead this really worked I don't believe no one has managed to advise this to me on other sites..
Thanks a million
Click to expand...
Click to collapse
Glad you got it sorted
i did try some custom rom on my phone. but none seems to be working with smartcover. like go black when i close the lid, get the answerbuttons when someone calls. so do i need to add something? or can someone tell me if any custom roms works with the smartcover?
know this forum to be real good. so im sure someone can help me out here
!!ALL QUESTIONS GO IN THE Q&A FORUM!! OR THEY MAY BE DELETED
Please use the red triangle report button and ask a mod to move the post to the correct forum .
kansel said:
i did try some custom rom on my phone. but none seems to be working with smartcover. like go black when i close the lid, get the answerbuttons when someone calls. so do i need to add something? or can someone tell me if any custom roms works with the smartcover?
know this forum to be real good. so im sure someone can help me out here
Click to expand...
Click to collapse
Gs3 doesnt support smart cover officially. Only starting from gs4.
Sent from my SM-N9005 using xda app-developers app