I have the Galaxy S3 (unbranded, rootet) with the following software:
4.1.2 (stock, build JZO54K.I9300XXELL4)
Baseband: I9300XXLH1
Kernel: 3.0.31-566833
When the phone is connected via bluetooth to my car kit (audi, bns5) I have the follwoing issue:
As soon as the phone is connected to the car kit, the car kit shows an "active phone call" originated by my own phone number and I can hear myself. The voice has lot´s of echo and sound like an alien. This issue also happens when I try to call someone (phone starts dialling but on the car speakers I only hear myself). If someone calls me then everything is fine. The issue does not happen when I use my old Nokia 6230 connected via bluetooth.
Audi already upgraded the bluetooth module in my car to the latest firmware, but no improvement so far.
Can you please help me. This issue is driving me crazy because I can not use the car kit anymore.
Would it help to upgrade the radio software of the S3?
Thanks!
Related
Hi,
I have many problems with this car kit, but let's start with the most annoying :
kit and phone disconnect after every incoming/outgoing call.
If I receive second call when they are in this "disconnect" state, they magically reconnect and sound is routed to car kit (with some 1-2-3 second delay).
The same happens if I dial new outgoing call.
When call finishes - puff - devices disconnect.
Car kit is upgraded to latest firmware in may.
Phone has stock ROM.
I talked to parrot technical support, they keep telling me "try this/try that" - nothing helps.
Any ideas ?
You know the HTC stock roms are buggy.
i do not use a parrot carkit but use another bluetooth carkit
i have to say that custom roms are behaving better, i can also stream music on mine.
have you tried a custom roms? you can always flash back to HTC rom if it does not work
have a look around in the rom developement section
Fixed
Problem was in Bluetooth settings in Topaz.
Somehow, Audio Gateway was "off" by default, and its power saving mode was "off" as well.
I turned both to be "on", and now phone doesn't disconnect from the Parrot after the call.
Battery life seems to be the same as before.
hi folks,
i have the following problem with ANY handsfree-sets:
pairing the phone: works.
sync of adressbook: works.
dial or take over a call: works.
i hear the caller clearly, --but no one hears me-- ?!?
looks like ANY kind of bloetooth mic does'nt work
what i have tried so far:
updated the Parrot CK3100 in my car to the last firmware. (V 4.23)
tried in my wifes BMW with OEM car-kit.
tried an old Logitech bluetooth head set
tried in an VW (don't know if it was OEM or aftermrket)
on the phone:
a LOT of soft- and hardresets.
tried a ROM from HTC-webpage.
as my phone was O2 branded, installed a new ROM from O2 webpage V 1.57.207.1 (GER)
..but it's always the same: i hear the caller, but no one can hear me ...
any ideas ?
I was wondering if anyone could help with this problem. My SGS II connects with my in built (Ford) car system, its does everything it should apart from that it can not display the call list (in or out). This was also the problem on my SGS on stock roms until I installed CM7 and then the call lists showed up perfectly. Is it the case that Samsung roms are putting the call logs in a different place that cannot be seen by the car system, if so would it be easy to change this or do I have to wait until a CM rom is made for the SGS II.
SGS II as well as SGS has a very gig problems with BT in car on stock ROM. I had SGS before and there was a problems BT constantly drops in AUDI car system. Temporarily it was solved by BT Fix from the market but finaly solved only coming to a custom ROM (all of them solving that). Now Having SGS II It is total disaster in AUDI - first it constantly drops BT connection and even more - if I'm talking by phone during being connecting to BT, connection failed BUT after call finished phone crushed down and it takes 10 second pushing power button to get it back :-( And then in phone all pairings went out! So - do anybody know this case? And waiting for the custom ROM.
I have a Mercedes E-class (new type). No problems at all with the BT. Very quick to connect, and I can control track fw/bw from the steering wheel. No drops. Works with the default music player as well as Spotify. Phonebook transfere is quick.
In terms of functions I also have no any problems but drops and crashes :-(
Ford focus audio bluetooth
Hello,
I have the same issue with the Ford Focus Bluetooth. It plays ans stops all the time. hands-free works great. Did you solve it?
Hello everybody.
the same issue with new Volvo S60. Previously car kit perfectly worked with Nokia E71... As for S2 - I was able to pair the phone and car. But afterwards, connection could be reestablished only if it's initiated from the phone side (I select "My Car" in bluetooth menu of the phone). Without such actions the car is unable to find the device...
Problem was solved for me when last modem was released. Use ROM with XKE2 modem.
Hi all,
Yesterday I have tested SGS2 (LiteROM 1.5) in my BMW E92 LCI and it works really fine so far.
(call, sms, phone adressbook and bluetooth audio streaming).
BMW offers the possibility to connect two phones at the same time.
I successfully connected my nokia business phone for bluetooth call & SGS2 for bluetooth audio streaming only.
SGS2 is the first mobile that I have connected to my car not only displaying title/artist information properly using the default music player,
but also offers good mp3 sound quality over A2DP.
Strange enough, when I use a different music player (e.g. PowerAMP) the title/artist information is not working any longer. Any ideas?
Cheers, Spad
Problem with transmission over car bluetooth
Hi there,
I have a galaxy s2 that used to connect (with no problems) with my alpine CDE-126BT
After I messed around with the service mode for a while trying to crank up the volumes, there is no transmitted voice over the call (the other side can not here me when I'm connected to the car's Bluetooth).
I know that if I reboot the phone all the changes that was done in the service mode would reset to the default settings, it seems to revert back default but I still have the same problem.
Any advice??
Thanks,
David.
Running standard 2.3.4 Gingerbread XWKI4
When phone connects to Parrot via Bluetooth and left as just this, phone works OK ... i.e. incoming & outgoing calls work OK, Bluetooth syncs and i get full contacts etc.
If I also turn on the standard Samsung SatNav .. the Satnav directions are plyed via Bluetooth & the Parrot kit to the cars built in speakers ....
However I noticed that when this Satnav is active incoming calls are not received ... and also you cannot make an outgoing call via parrot ... i.e if you select a contact from Parrot it attempts to make call, but comes up with call failed.
If I initiate call form phone .. it does make outgoing call .. but not using Parrot, i.e no handsfree.
It does remain 'connected' to Parrot.
Is there a problem with more than one connected Bluetooth device at a time ?
I use the same Parrott, but have no issues. However I'm using cm9 Which seems to perform better with my Parrott than stock roms. if you don't want custom ROM, upgrade to newer samsung version-
i noticed inprovements from 2.3.4 to 2.3.6
Sent from my GT-N7000 using xda premium
When I connect to Kies it tells me I am on latest version, it does not give me option to upgrade.
you should maybe try to update the headset firmware
theres a tool to download the version to a flash drive..and then just plug it to the usb in car & turn on the switch
I did upgrade when I bought SGSII
Procedure to upgrade was very easy..
I'll try some specific tests to find out failure modes.
HI Wizards
I must inform you for the following
I have installed the latest I9100G nightly - cm-9-20120730-NIGHTLY-i9100g.zip
2 problems are repeat themselves all releases
1. In PC - 'Device Manager' can't recognize device's Bluetooth properly - it says that drives cannot be found (a specific one)
2. In Car - I have a Bluetooth Speaker installed in my car. (Nokia CK-100, if required)
When I make an outgoing call everything works properly both sides are speaking and hearing each other
BUT
When I receive an incoming call device isn't recognize as BT connectivity and I can NOT hear or speak via car's microphone. I must use it as handset.
It is a known issue - I saw much of CM9 for I9100G users that complained this problems
Are there any suggestions to fix it??? Does someone know the source of this problems??????
Police might be caught me speaking without BT speaker and then I will get a report....
Trust'n you... tnx
When receive or dial out, my Nokia BH-102 mono bluetooth v2 works for CM9/CM10, but not Jabra Easycall v3 bluetooth. However music streaming works for Jabra mono headset.