Related
Hi again,
my problem is as followed,
Recently rooted my Galaxy N7000 and replaced firmware with IMilkas ICS Tablet version.
Now my problem is I want to get rid of it yet the USB is not recognized by my Windows computer.
I am unable to use Mobile Odin as it will crash instantly also unable to use Odin via PC due to my phone not being recognized.
So any help would be great !
______________________________________________________
FIXED
I downloaded via the app store an app called "Airdroid" which allows you to move files from your pc to your phone whilst both devices share the same Network!
Moved a new Rom onto my phone and rebooted it into Recovery mode
> Install Zip from SDcard located my main file and installed it.
applied the update the same way, after restarting ,it threw a bunch of random error messaged around so I used the app CWM which comes with the ROM
option : FLASH KERNEL
located same rom as before and installed it with CWM followed by a reboot I used the option Flash Update in CWM and updated Griskelo Rom .
SO thank god it worked no error messaged and my USB works again so Odin can get back to work
Most likely there is a much easier way but this is what I figured out myself and as this forum says before you sign up... You are a noob any ways !
lol
hope I helped somebody with this and hope someone else posts the easier way beneath this
Hello Guyz Im Tanmay Currently Running cynus t2 rom on canvas 2 a110
If ur device is running Mobistel cynus T2 rom and after lots of try u r unable to root it, well hard luck though
After almost 1 month of struggle to root this rom using Sp Flash Tool i m here to say Its impossible
SO, there is a way out to get your device again rooted.
I ve managed to install official MCCX ICS 4.0.4 rom n flashed it using SP FLASH TOOL.
To Proceed u must have inter net connection with windows 8 64 bit because i have tested on it. not so sure about other os.
1. download official stock rom from here "http://d-h.st/NOR". If have skip step.
2. uninstall all mobistel cynus t2 drivers/ pre loader drivers .
3. open control panel in win 8 the metro Ui one not classic one.I think u all might be knowing how to go there.
There click on general tab then click- advanced startup n press restart.
then go to troubleshoot option n press option 7 i.e disable driver signature. Thats the most Important step.
4. Ur pc will get restarted n u ll enter in the in that option.
5. ur UAC User Account Control must be enabled atleast to the recommended level/2nd one from the top.
6. connect ur phone to usb and install mobistel cynus t2 drivers according to ur architecture . the windows will ask u to install drivers in red box.
Press yes. it will be pomp for 3 times all the times press yes.It must be pomp up in red box REMEMBER THAT. if not try x86 drivers.
7.Its time to play.
8. time to install PreLoader drivers. very important step open ur eyes n ears n follow the steps carefully. without it mobile wont flash.
9. switch off ur canvas 2 n remove the battery. remover for atleast 10 sec n then reinsert it.
10. open device manager. In switch off state connect ur phone there the device manager screen will flick and u will see under ports
Mobistel Cynus T2 Da Usb Vcom(3) or some thing like that. Hurry up as it will be visible for only 3 secs.
if its shows that means drivers are sucessfuly installed. For some users if there is pomp MT65xx like that then update drivers manually and browse under mobistel cynus T2 in programme files.
11. open/unrar spflash tool in folder Micromax A110 Stock Rom,Gude,Drivers & Tools. open it.
Load scatter file in folder "Micromax A110 Stock Rom,Gude,Drivers & Tools\S9081_MP_F4_B1_IN_MMX_0.09__flasher_user (1)\S9081_MP_F4_B1_IN_MMX_0.09__flasher_user\S9081_MP_F4_B1_IN_MMX_0.09__flasher_user" NAMED "MT6577_Android_scatter_emmc"
12. Tick all options including recovery.
Press Firmware->upgrade, need not to press download, then at that moment connect canvas 2 in switched off state with battery.
First u will see red ring completes to 100% n further phone will restart. dont panic or dont try to remove usb as it may lead to brick.
remove only when sptool shows error. The error can be 4050 or 8100.
after red ring there will be voilet ring then grey then yellow in last the green ring
Ufff Thats it phone has been flashed. remove battery n press power u r having original micromax ICs stock rom.
:victory:
13. in last use binary tool to root canvas 2 n install CWM recovery n plz install Only pre rooted roms.
the best rom is JellyDream By dark4droid available in Xda site.
I M NOT RESPONSIBLE IF U BRICK UR PHONE. ALL THE PROCESS IS CARRIED IN A SAFE PROCESS AND IS SUCCESSFUL.
THANX TO SOME PEOPLE "DARK4DROID", "TECHIZIES", "lopestom", "mmxa110user" FOR KEEPING ME UP.
IF U LIKE MY WORK PLZ HIT THANX.
IF ANY HELP PLZ POST SUGGESTIONS
Tested this process on Windows 7 32 n 64 bit
The process was sucessful
Haven't tested on xp
any Voltaire can post if the process was sucessful.
Cant get it to flash
I followed the tutorial link given.. the problem is my phone doesnt get any progress bar or anything when i start the firmware upgrade and connect my turned off phone.. nothing happens at all.. please help..
Thanks in advance
First of all its not the phone but the sptool which shows progress in red green voilet yellow n grey bar .
Secondly if sptool doesnt shows progress that mean there is problem with your drivers.
HInt-
1. In win 8 enter the disable driver enforcement signature.
2. install drivers for mobistel. In red box press install drivers for three times . Remember that in red box.
3. connect phone in switch off state and open device manager. Under ports see Mobistel cynus preloader da vcom(3) .
If its there then use flash tool n try to press firmware->upgrade and connect phone immediately in switched of state.
4. Enable UAC to second level atleast.
5. only use sptool provided in the link. and run as admin.
If helped hit thanx.
Hello bro i had d same problem but eventually solves it out so if u need any assistance then pm me n if u dont get a quick reply plz dont loose hope
Xda is for helping each other :thumbup:
Sent from my Cynus T2 using xda app-developers app
---------- Post added at 04:31 PM ---------- Previous post was at 04:30 PM ----------
I can help u as i faced d same prob jus update me wid pm n ill reach to ur help
Sent from my Cynus T2 using xda app-developers app
Look all as I mentioned above that it took me approx a month to got things done. So its not about loosing hope or all.
I was performing steps right my drivers was also installed properly. I tried many old n new versions of sp tool but the sp tool
Provided In this link worked for me so i posted the steps through which i got things working.
For those still error pomp up do these step
First of all try various versions of sp flash tool
Second format ur windows n proceed freshly.
Third try the same process by using ur friends laptop/desktop
Fourth try using different architecture like 32 bit or windows 7
enjoy
mayur.3.92 said:
Hello bro i had d same problem but eventually solves it out so if u need any assistance then pm me n if u dont get a quick reply plz dont loose hope
Xda is for helping each other :thumbup:
Sent from my Cynus T2 using xda app-developers app
---------- Post added at 04:31 PM ---------- Previous post was at 04:30 PM ----------
I can help u as i faced d same prob jus update me wid pm n ill reach to ur help
Sent from my Cynus T2 using xda app-developers app
Click to expand...
Click to collapse
can u please elaborate what the error was and how did u solve it...
It will help others if u want to share n myself will get a help to ease the problems
INVALID IMEI error
i installed New ROM DARK4DROID Jelly dream 4.1 on my QMobile A10 through CWM recovery method.
1) I flashed the CWM recovery file for QMobile A10 to my phone. It goes perfect.
2) Reboot the phone in CWM and installed the new Custom ROM above.
3) Got problem. Invalid IMEI when my sim is loaded by phone. I can not call or receive any thing like messages.
4) The ROM has no issues. Like autorotation and accelerometer is working fine. Just played the games like Temple run , subway surfers and can access google play also.
5) i have made a backup before installing This New ROM. actually i make backup by using default recovery method of phone.
6) one of my friend told me to get back important user data like IMEI by going into CWM recovery boot. but there when i click restore option, can't find the back even i placed it in internal memory and sd card. Please help how to solve this problem. ROM is perfect.. i know its not related to ROM.
Dil2013 said:
i installed New ROM DARK4DROID Jelly dream 4.1 on my QMobile A10 through CWM recovery method.
1) I flashed the CWM recovery file for QMobile A10 to my phone. It goes perfect.
2) Reboot the phone in CWM and installed the new Custom ROM above.
3) Got problem. Invalid IMEI when my sim is loaded by phone. I can not call or receive any thing like messages.
4) The ROM has no issues. Like autorotation and accelerometer is working fine. Just played the games like Temple run , subway surfers and can access google play also.
5) i have made a backup before installing This New ROM. actually i make backup by using default recovery method of phone.
6) one of my friend told me to get back important user data like IMEI by going into CWM recovery boot. but there when i click restore option, can't find the back even i placed it in internal memory and sd card. Please help how to solve this problem. ROM is perfect.. i know its not related to ROM.
Click to expand...
Click to collapse
I know these errors are possesd by many
First of all do a factory backup.
Get root access by root tool n copy modem.img to system folder u will get modem at any site.
If not install some other rom compatible to ur device. Dont forget to hit thanx
tanmay5 said:
Tested this process on Windows 7 32 n 64 bit
The process was sucessful
Haven't tested on xp
any Voltaire can post if the process was sucessful.
Click to expand...
Click to collapse
can u tel me how to install official ICS using windows 7
This post is how to install ics official stock rom on canvas 2 l.
Read the blog carefully
Error
hello SIr
ERROR ERROR !!!!!!
device driver not installed Successfully................on my mmx canvas 2.............. when connect usb cable.
SP flash just says searching and progress bar is at 0% and nothing happens. I have installed preloaded drivers . please assist
lukip005 said:
SP flash just says searching and progress bar is at 0% and nothing happens. I have installed preloaded drivers . please assist
Click to expand...
Click to collapse
does it asked u to install the drivers in red box????
Good morning to all, :laugh:
I own and use a mobile phone model XTOUCH X401 with Android 4.0.4 on board. and kernel3.0.13. The mobile phone was root but for a subsequent issue I have reported it to factory state, obviously the system has been added to what they had. the state restore factory I deleted the app and SuperUser does not allow me to have the recovery mode as well as administrator permissions. When I attempted to remake the Root I encountered the problem that my PC (but also others) did not recognize the phone in debug mode to the root. I changed my PC I used wires but nothing more. Of course I downloaded the drives from the official website of XTOUCH but also from other sites to verify the integrity. I also downloaded the drive for geerali MTK6575 with the same result. What can I do, but mostly where I'm wrong?
Thanks in advance for all who help me. :good:
mosor1967 said:
Good morning to all, :laugh:
I own and use a mobile phone model XTOUCH X401 with Android 4.0.4 on board. and kernel3.0.13. The mobile phone was root but for a subsequent issue I have reported it to factory state, obviously the system has been added to what they had. the state restore factory I deleted the app and SuperUser does not allow me to have the recovery mode as well as administrator permissions. When I attempted to remake the Root I encountered the problem that my PC (but also others) did not recognize the phone in debug mode to the root. I changed my PC I used wires but nothing more. Of course I downloaded the drives from the official website of XTOUCH but also from other sites to verify the integrity. I also downloaded the drive for geerali MTK6575 with the same result. What can I do, but mostly where I'm wrong?
Thanks in advance for all who help me. :good:
Click to expand...
Click to collapse
Hey ,
i dont know how to get it reconize but Superuser has a function to allow everything. Go to
-settings
- automatic response
- choose allow everthing
JUST PRESS THANKS
Sent from my HTC Sensation Z710e with Albinoman's Cyanogenmod 10.1
erdal67 said:
Hey ,
i dont know how to get it reconize but Superuser has a function to allow everything. Go to
-settings
- automatic response
- choose allow everthing
JUST PRESS THANKS
Sent from my HTC Sensation Z710e with Albinoman's Cyanogenmod 10.1
Click to expand...
Click to collapse
thanks for the reply,
my problem is that in debug mode, my device is not recognized by my computer (as in others) and the Super User app is not installed as well as the CWM. how to connect my computer with my X401?
Looks like I have a made a mistake which could easily hand me "The dumbest noob in XDA of the year" Award
I have a ZEN ultrafone 701 HD (MTK 6589) device with HD screen
Things were going fine when this Fine day I got a bright idea to change ROM
I have a rooted Phone with working CWM, so went into recovery and cleared data/cache/dalvik cache,battery log etc
Then I did a epic goof up by clicking on the ROM file of a different device to install as ZIP from CWM . by the time i realized, it was too late
Now the phone boots up, shows logo and reboots,again and again. a previously working key combination to bring diagnostic mode is now not working
The phone starts up and reboots so fast the PC cannot detect the device in adb mode. perfect aint it ?
SO I was wondering is there any way possible at all to get out of this situation ?
me too i am also facing similar problem mine get flashed through sp flash tool ,but still hang on logo after blue screen
any suggestion please
rkinfo_khan said:
me too i am also facing similar problem mine get flashed through sp flash tool ,but still hang on logo after blue screen
any suggestion please
Click to expand...
Click to collapse
flash original stock rom through sp tool
http://support.moulnisky.com/index....ltrafone 701HD_Software_V06_20130424.rar.html
hello sir, iam new to android, i also have zen ultrafone 701 hd, i rooted it using the method given here then installed cwm recovery using mobile uncle tools, ten i tried to flash sam701hd rom but i got status 7 error in cwm and now my phone is stuck on zen logo:crying:, can u please help me, how can i make my phone work??? help would be greatly appreciated sir,,,, regards....
And.. MA phone is back !
I gave my phone to service center and just said I have no Idea what happened .. they took a month and then gave it back repaired ! in other words with Stock ROM
Another thing is maybe If I would have been patient and used SP flash tools properly , things would might have been easier
got a very svere problem .. with my zen ultra 701
hello guys, This is my first post , but that doesn't mean I havn't read a lot of posts on this site
the main reason why I am writing here because I am having problem with my zen ultra 701 it resrats continuously after trying custom rom from here http://forum.xda-developers.com/showthread.php?t=2172803&page=69 ... I am sure I covered all the steps very carefully.. rooted the phn with uncle tools from playstore and cwm recovery from this site .. its been many days since my phn is off.. plz help ..
diagnostic mode doesn't work
and this phn is not being detected properly , it restarts before windows detects and installs anything .... very fast rebooting . I have downloaded vcom driver , zen phn drivers (usb) from this site , before trying custom rom I made sure I have followed all the steps very carefully .. Don't know where it went all wrong .. Plz help asap ..
every suggestion and solution is most welcomed .. and I am here online for 4 hours today ..waiting for any reply
got stuck in boot loop in my zen 701 hd... plz help
i got my phone stuck in boot loop although I installed cwm recovery via mobile uncle tools but i am not able to get into CWM recovery I did made a backup of my rom via CWM before... plz help
boot lopp problem solved
KamaldeepV said:
hello guys, This is my first post , but that doesn't mean I havn't read a lot of posts on this site
the main reason why I am writing here because I am having problem with my zen ultra 701 it resrats continuously after trying custom rom from here http://forum.xda-developers.com/showthread.php?t=2172803&page=69 ... I am sure I covered all the steps very carefully.. rooted the phn with uncle tools from playstore and cwm recovery from this site .. its been many days since my phn is off.. plz help ..
diagnostic mode doesn't work
and this phn is not being detected properly , it restarts before windows detects and installs anything .... very fast rebooting . I have downloaded vcom driver , zen phn drivers (usb) from this site , before trying custom rom I made sure I have followed all the steps very carefully .. Don't know where it went all wrong .. Plz help asap ..
every suggestion and solution is most welcomed .. and I am here online for 4 hours today ..waiting for any reply
Click to expand...
Click to collapse
just download the above package of zen ultraffone 701 hd rom and flash via sp flash tool it works I got my device back...
Is there a way to get into CWM recovery when the phone enters a bootloop or some key combinations. I tried all the key combinations but none of them work.
miui v5 rom for 701 hd here
http://forum.xda-developers.com/showthread.php?t=2747072
Hey guys!!
Here is the latest miui rom for zen ultrafone 701hd but has some bugs...
Chk it out
vishwasnp said:
I gave my phone to service center and just said I have no Idea what happened .. they took a month and then gave it back repaired ! in other words with Stock ROM
Another thing is maybe If I would have been patient and used SP flash tools properly , things would might have been easier
Click to expand...
Click to collapse
how much it will cost if warranty has ended??
Unable to download
nileshtambe
Unable to download the ROM file...post a alternate download and procedure to do it
did u get any way to repair ur Zen ultrafone 701..?? i m also facing thr same problem
KamaldeepV said:
hello guys, This is my first post , but that doesn't mean I havn't read a lot of posts on this site
the main reason why I am writing here because I am having problem with my zen ultra 701 it resrats continuously after trying custom rom from here http://forum.xda-developers.com/showthread.php?t=2172803&page=69 ... I am sure I covered all the steps very carefully.. rooted the phn with uncle tools from playstore and cwm recovery from this site .. its been many days since my phn is off.. plz help ..
diagnostic mode doesn't work
and this phn is not being detected properly , it restarts before windows detects and installs anything .... very fast rebooting . I have downloaded vcom driver , zen phn drivers (usb) from this site , before trying custom rom I made sure I have followed all the steps very carefully .. Don't know where it went all wrong .. Plz help asap ..
every suggestion and solution is most welcomed .. and I am here online for 4 hours today ..waiting for any reply
Click to expand...
Click to collapse
did u get any way to repair ur Zen ultrafone 701..?? i m also facing thr same problem
Hello everyone , on trying to upgrade my alcatel v860 to a cyanogenmod 7 system , i had to delete the system partition and custpack partition because this new zip file will replace those current partitions , however i had an issue .
I have the boot , bootloader , recovery & data partitions still active in the phone , i know this because i did not erase those partitions , however since my system partition do not exist and possibly fastboot makes a call to phone /usr/bin files for the upload , i am stuck in the logo of android and i am unable to upload those partitions because right now my windows do not recognize the phone driver .
On fastboot i had android 1.0 driver , but know it turned to unknown device .
After a few looks n the web i realized that the driver that i need is the broadcom usb to serial driver , witch i have here , but somehow it is not installing correctly and right now i have no idea why is that happening .
here it is a picture of the installation .
https://s14.postimg.cc/8mavyxu2p/vodafone.jpg
Does any kind soul around here with time and patience to read this topic in millions of others experience this ?
Is there a way to solve this issue without much sweat ?
If the only solution is jtagging the phone then where can i find the schematic on the phone pins to do it ?
Note : this phone is not in warranty anymore , so send it to the provider is out of subject .
If you have read this topic until here , i thank you .
Best regards to everyone
I discovered that the broadcom to serial driver that i have here with the correct VID for my phone works in XP and i was trying to install it in W7 64bit .
So , the best way is to create a Vrtual XP machine for this issue and add the phone usb port (identifyed as Broadcom) to VM config so the XP can detect it .