Ok, I I tried to install CM10 the other day. I thought I made back ups of everything aparently I didnt.
So let me start with the specs
******tampered*******
******unlocked********
JEWEL PVT SHIP S-ON RL
HBOOT 2.09.0000
Radio 1.12.11.1210
OpenDSP-v31.1.0.45.0815
eMMc-boot
Oct 18, 2012
When I goto recovery I goto the TWRP Recovery screen with all the blue boxes.
Apparently I must have deleted my internal SDcard , I cant mount it. It shows 0mb. If I try to click restore it shows nothing on the internal card.
I do however see the Micro SD card.
For awhile, I was able to see the Cyanogen Mod splash screen just spinning, now is just black.
I can boot into Recovery mode.
Any helpful ideas to try. Im guessing I need to get my internal sdcard accessible again somehow?
Thanks
scsouders said:
Ok, I I tried to install CM10 the other day. I thought I made back ups of everything aparently I didnt.
So let me start with the specs
******tampered*******
******unlocked********
JEWEL PVT SHIP S-ON RL
HBOOT 2.09.0000
Radio 1.12.11.1210
OpenDSP-v31.1.0.45.0815
eMMc-boot
Oct 18, 2012
When I goto recovery I goto the TWRP Recovery screen with all the blue boxes.
Apparently I must have deleted my internal SDcard , I cant mount it. It shows 0mb. If I try to click restore it shows nothing on the internal card.
I do however see the Micro SD card.
For awhile, I was able to see the Cyanogen Mod splash screen just spinning, now is just black.
I can boot into Recovery mode.
Any helpful ideas to try. Im guessing I need to get my internal sdcard accessible again somehow?
Thanks
Click to expand...
Click to collapse
Did you fastboot flash boot boot.img ? You need to do that since you are S-ON.
Sent from my EVO using xda app-developers app
Delakit said:
Did you fastboot flash boot boot.img ? You need to do that since you are S-ON.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Is that throught the command prompt on my PC while having fast boot usb on?
scsouders said:
Is that throught the command prompt on my PC while having fast boot usb on?
Click to expand...
Click to collapse
That'd be fastboot, yes.
Sent from my EVO using xda app-developers app
Delakit said:
Did you fastboot flash boot boot.img ? You need to do that since you are S-ON.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Seems to be a popular issue as of late.
Sent from my EVO using xda premium
FinZ28 said:
Seems to be a popular issue as of late.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Indeed it has. We shall create a few more threads about it. Maybe pin half of them? Or just prompt it as a pop-up reminder as users enter the site. Ideas... Ideas...
Sent from my EVO using xda app-developers app
Delakit said:
Indeed it has. We shall create a few more threads about it. Maybe pin half of them? Or just prompt it as a pop-up reminder as users enter the site. Ideas... Ideas...
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Maybe an online test of basic rooting & flashing knowledge, required prior to downloading & flashing ROM's, kernels, etc.
I kid, I kid..........
Sent from my EVO using xda premium
FinZ28 said:
Maybe an online test of basic rooting & flashing knowledge, required prior to downloading & flashing ROM's, kernels, etc.
I kid, I kid..........
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I like that, actually. Lets keep these ideas flowing. We could come to a revolutionary revision to our developers forums! Hahaha.
READ, PEOPLE! SEARCH! RESEARCH! AND RE-SEARCH AGAIN!
Sent from my EVO using xda app-developers app
I think Im in over my head now. I used to have no issues installing stuff on my old EVO, alot more involved with the LTE
Has anyone tried http://mobiletechvideos.mybigcommerce.com/ to repair a bricked phone ?
I get to the HTC splash screen now, then screen is black...doesnt sound good.
scsouders said:
I think Im in over my head now. I used to have no issues installing stuff on my old EVO, alot more involved with the LTE
Has anyone tried http://mobiletechvideos.mybigcommerce.com/ to repair a bricked phone ?
I get to the HTC splash screen now, then screen is black...doesnt sound good.
Click to expand...
Click to collapse
Lol. Did you read any of these posts? Do a wipe, install again, flash the boot.img right after, restart.
Sent from my EVO using xda app-developers app
Delakit said:
Lol. Did you read any of these posts? Do a wipe, install again, flash the boot.img right after, restart.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
When I reboot my phone into fastboot usb, i have my usb connected to computer,
I bring up my command prompt and entered
cd Downloads
cd Evo4GLTERoot2
fastboot oem get_identifier_token
Already unlocked..skipped that step
fastboot flash recovery openrecovery-twrp-2.1.8-jewel.img
fastboot erase cache
Tried
fastboot flash recovery stock_EVO4GLTE_recovery.img
fastboot erase cache
So am I trying to flash the CyanogenMod boot.img or a different one.
Am i too use a different command in the CMD promt
As a reminder, I cannot see the TWRP screen anymore. Just the HTC splash screen,
Thanks
scsouders said:
When I reboot my phone into fastboot usb, i have my usb connected to computer,
I bring up my command prompt and entered
cd Downloads
cd Evo4GLTERoot2
fastboot oem get_identifier_token
Already unlocked..skipped that step
fastboot flash recovery openrecovery-twrp-2.1.8-jewel.img
fastboot erase cache
Tried
fastboot flash recovery stock_EVO4GLTE_recovery.img
fastboot erase cache
So am I trying to flash the CyanogenMod boot.img or a different one.
Am i too use a different command in the CMD promt
As a reminder, I cannot see the TWRP screen anymore. Just the HTC splash screen,
Thanks
Click to expand...
Click to collapse
Lol. I said to preform a wipe, install the Rom, fastboot the boot.img, and restart the phone.
Not sure why you did anything with a token and you don't need to keep flashing recovery. No clue what the other thing is that you're flashing. And you're going to want a much later version of TWRP. Preferably 2.3.3.0+.
So I'll run through this again even though there are guides to all of this.
1. Wipe Cache, Cache/Delvik, Data, and System.
2. Install your ROM.
3. fastboot flash boot boot.img (that's a ROM kernel).
4. Restart your phone.
Sent from my EVO using xda app-developers app
Ok, I may be getting somewhere. I got the CM10.1 but when i get to the lock screen nothing responds, I tried to reinstall, same thing
scsouders said:
Ok, I may be getting somewhere. I got the CM10.1 but when i get to the lock screen nothing responds, I tried to reinstall, same thing
Click to expand...
Click to collapse
You need to elaborate on nothing "responding." If touchscreen doesn't work then you need to downgrade using babyracun and S-OFF.
Sent from my EVO using xda app-developers app
Like delakit said, you must have the 3.16 firmware with the new touch panel. Meaning, you can only use 3.16 based sense ROMs. If you get S-off, you can downgrade your firmware and use any ROM you like.
Sent from my EVO using xda premium
Read the sticky threads cause you don't seem to know what your doing. Take the time yo read them. Arm yourself with info for problems like this
SENT FROM MY LTEVO
You cannot flash ANY CM/AOSP/AOKP roms if you are on the latest OTA which you are. The touch panel will not work.
Related
Sorry in advance if this had been covered before but there are so many different threads everywhere i don't know where to start. As of right now i'm running 1.50 s-on and have been attempting to use the HTC method to unlock the bootloader. I have no problems or errors at all til i get to i think it's step 13 or 14
sending 'unlocktoken' (0 KB)...
OKAY [ 0.152s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.006s]
finished. total time: 0.159s
it appears that everything goes through but then nothing happens? my phone just stays in the same hboot screen. What am i doing wrong? thanks in advance and sorry again if this has been covered but i'm somewhat noob to rooting and am still trying to figure all of this out.....
If your cdma you need to run the latest ruu 2.17 ruu exe . Once done then apply the unlock code your set.
Sent from my PG86100 using xda premium
You can download the ruu in the sticky on how to get back to stock. I had this same problem and that's how I got it fixed.
Sent from my PG86100 using Tapatalk
reaper24 said:
If your cdma you need to run the latest ruu 2.17 ruu exe . Once done then apply the unlock code your set.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
ok how do i run the ruu? it's a .exe file so i just plug in my phone and run the .exe?
EDIT: i did the latest OTA from sprint a couple days ago (removed CIQ) and i'm running software number 2.17.651.5...is that what you guys are referring to?
casper916 said:
ok how do i run the ruu? it's a .exe file so i just plug in my phone and run the .exe?
EDIT: i did the latest OTA from sprint a couple days ago (removed CIQ) and i'm running software number 2.17.651.5...is that what you guys are referring to?
Click to expand...
Click to collapse
Yes you need to run that ruu from fastboot in hboot . It is the same Ota you took but will fix your problem.
Sent from my PG86100 using xda premium
reaper24 said:
Yes you need to run that ruu from fastboot in hboot . It is the same Ota you took but will fix your problem.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
ok one last question? I'm at the shipped roms.com site and there are is a .zip and a .exe of the RUU. Which one should i DL? if it's the zip do i extract it to the rootevonew folder on my C: drive? And just so i'm clear i go into fastboot and while in fastboot i run the .exe on my comp? or do i put it in the root of my sd card? Sorry again for all the questions.....
Put your phone on fasboot usb .
Run RUU.EXE
And your set. It will take about 10 min to complete.
Realize that if you remove your USB while its updating your phone might end up bricked so be careful to not get it unplugged.
Sent from my PG86100 using Tapatalk
iTzLOLtrain said:
Put your phone on fasboot usb .
Run RUU.EXE
And your set. It will take about 10 min to complete.
Realize that if you remove your USB while its updating your phone might end up bricked so be careful to not get it unplugged.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
ok, and i need to uncheck the fastboot option in my phone first correct. Just like if i were to be doing the HTC unlock?
casper916 said:
ok, and i need to uncheck the fastboot option in my phone first correct. Just like if i were to be doing the HTC unlock?
Click to expand...
Click to collapse
Not really. you can just remove the battery and place it back in.
casper916 said:
ok, and i need to uncheck the fastboot option in my phone first correct. Just like if i were to be doing the HTC unlock?
Click to expand...
Click to collapse
Ya you can do that to make it easier to get into hboot .
Sent from my PG86100 using xda premium
reaper24 said:
Ya you can do that to make it easier to get into hboot .
Sent from my PG86100 using xda premium[/QUOT
thanks again and i'll let you know how it goes
Click to expand...
Click to collapse
iTzLOLtrain said:
Put your phone on fasboot usb .
Run RUU.EXE
And your set. It will take about 10 min to complete.
Realize that if you remove your USB while its updating your phone might end up bricked so be careful to not get it unplugged.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Right on thanks guys i finally got around to doing all this and it worked. One last question....Any advice on a particular ROM to flash? I was looking at the Nocturnal Adrenaline E3D 1.0.2 ODEX?? what do you guys think? Thanks again for all the help...
I'm currently running MeanRom 3.92. It's really good. Lots of features & easily over clockable on included ziggy kernel or Anthrax Rls8 Final. Also includes other options that get loaded onto sdcard for flashing.
I flashed leedroid Tweaks, & anthrax, clocked to 1.728Ghz. Stable, fast, quadrant average about 4k.
All up to your preference really, but some consider it a good idea to stick with 2.17 based roms if that's the radio base you have.
Sent from my PG86100 using Tapatalk
Ok cool,and i can just flash that using the fastboot method right? What about the kernel? Do I need to flash that seperately or does it all go in with the rom?
Sent from my PG86100 using XDA
casper916 said:
Ok cool,and i can just flash that using the fastboot method right? What about the kernel? Do I need to flash that seperately or does it all go in with the rom?
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
Yes, once you enter recovery VIA fastboot command prompt everything will flash fine. See the Hboot 1.50 guide flashing notes in my signature for details or just get 4ext recovery.
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Yes, once you enter recovery VIA fastboot command prompt everything will flash fine. See the Hboot 1.50 guide flashing notes in my signature for details or just get 4ext recovery.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
+1
we are android, android is us
Did you connect the EVO to your USB
Sent From my EVO 3D x515m s off using xda premium
casper916 said:
Ok cool,and i can just flash that using the fastboot method right? What about the kernel? Do I need to flash that seperately or does it all go in with the rom?
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
run 4ext recovery, u dont need a usb cord...and the best rom out right now is ZR3D
http://forum.xda-developers.com/showthread.php?t=1561999
evomike77 said:
run 4ext recovery, u dont need a usb cord...and the best rom out right now is ZR3D
http://forum.xda-developers.com/showthread.php?t=1561999
Click to expand...
Click to collapse
Ok i got 4ext recovery and am trying to figure it all out, I read the thread on 4ext but I'm totally confused. I download the rom, put it on the root of my sd
Card, then open 4ext and when I install through 4ext do I still do the full wipe/dalvik cache wipe, etc. Etc? Or can I just install Zip from sd Card?
Sent from my PG86100 using XDA
casper916 said:
Ok i got 4ext recovery and am trying to figure it all out, I read the thread on 4ext but I'm totally confused. I download the rom, put it on the root of my sd
Card, then open 4ext and when I install through 4ext do I still do the full wipe/dalvik cache wipe, etc. Etc? Or can I just install Zip from sd Card?
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
it works the same as any other recovery, but when you choose the zip to install, a menu will pop up asking you what to do prior to the flash, that is where you do all your wiping...enjoy
Hi,
I have an unlocked Rezound that will boot to the hboot screen and fastboot one time and then I have no control over anything. I tether it to the computer but it does not find the device. If I try Fastboot or Recovery or any of the options, nothing happens.
Any ideas?
Garry
Maybe a dumb question but do you have the correct driver installed on your computer? Have you used ADB before without issues?
Please clarify a bit can you access recovery, can you use adb?
Sent from my ADR6425LVW using xda premium
lithium630 said:
Maybe a dumb question but do you have the correct driver installed on your computer? Have you used ADB before without issues?
Click to expand...
Click to collapse
Yes, not at all dumb. I was using it all day before it bricked.
Try reflashing a recovery in boot ....if you can access hboot you're not bricked
Sent from my ADR6425LVW using Tapatalk 2
Chyrux said:
Please clarify a bit can you access recovery, can you use adb?
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Sure, I can not access recovery and ADB does not recognize my phone when I plug it in. I can reboot to Hboot, it runs Hboot once - goes through the fastboot and then it does nothing. I try recovery or fastboot or any other option and nothing happens. It is dead.
blah i've seen this problem before...think it's a hardware failure
jayochs said:
blah i've seen this problem before...think it's a hardware failure
Click to expand...
Click to collapse
I'm not too sure. Happened when I was trying to go back to GB. I hadn't flashed the ICS Firmware but was on an ICS ROM and tried going back. Boinked my phone the same way his/hers. I couldn't use ADB, recovery, etc.
Dumb idea (but better than nothing) did youtry to reinstall the drivers?
localceleb said:
Try reflashing a recovery in boot ....if you can access hboot you're not bricked
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
I can get in Hboot and it goes through the initial fastboot and then I have no control. How do I flash recovery in boot?
Just rename a recovery.IMG to the p98img file name, load it onto your sd card and boot into hboot.
Sent from my ADR6425LVW using xda premium
Chyrux said:
Just rename a recovery.IMG to the p98img file name, load it onto your sd card and boot into hboot.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Is that a stock rom image? Or a Clean Rom image or the recovery-ra? Thank you in advance.
kingspan said:
Is that a stock rom image? Or a Clean Rom image or the recovery-ra? Thank you in advance.
Click to expand...
Click to collapse
I have a bunch of roms - renamed one to the pH98img, it loaded but still nothing.
kingspan said:
I have a bunch of roms - renamed one to the pH98img, it loaded but still nothing.
Click to expand...
Click to collapse
I think he is suggesting that you reinstall AmonRa recovery (not a ROM) using the PH98img. ...my $.02
Good luck!
rfarrah said:
I think he is suggesting that you reinstall AmonRa recovery (not a ROM) using the PH98img. ...my $.02
Good luck!
Click to expand...
Click to collapse
Tried both ROM renaming and renamed Amon RA - neither worked.
kingspan said:
Tried both ROM renaming and renamed Amon RA - neither worked.
Click to expand...
Click to collapse
last thing you could try is to find one of the complete stock RUUs in ph98img.zip form and see if that will install.
I had that happen and it kept failing to install, throwing partition errors. Guessing all the flashing killed the nand memory. Verizon sent me a replacement overnight.
kingspan said:
Sure, I can not access recovery and ADB does not recognize my phone when I plug it in. I can reboot to Hboot, it runs Hboot once - goes through the fastboot and then it does nothing. I try recovery or fastboot or any other option and nothing happens. It is dead.
Click to expand...
Click to collapse
This happened to me when I failed to get S-OFF (I screwed up the wire trick terribly), and I was unable to recover. Once the battery died, the phone was done, since it needs software to use the charger. I was able to jury-rig my old DINC battery to try a few more times, but I ended up exchanging it, telling Verizon it just died and they accepted it as DOA. Of course I bricked it the same night FedEx delivered it so I was able to do a return w/out warranty issues being part of it.
http://db.tt/60qrVRHc
Download that file. Rename it by removing the "TWRP-" in the file name and then place it on the root of your SD card. And reboot into hboot. If that does nothing I'll be shocked.
Hi everyone,
I recently tried to flash a new ROM and had to upgrade my HBOOT. After i did so, I continued to flash the rom but probably made a noob move along the way because it got stuck at the HTC boot logo. I turned my phone off and then booted into recovery again but then got the error that 4ext was booting into safe mode because it could not mount the sd card. I did a bit of research and came across a thread that said to reflash 4ext and so I did. Now when I'm trying to boot into recovery, I get stuck at HTC boot logo again. At this point all I can boot into is HBOOT. Is there anything I can do or is my phone pretty much bricked?
My HBOOT version is currently 1.93.002.
Thanks.
vkhemlani96 said:
Hi everyone,
I recently tried to flash a new ROM and had to upgrade my HBOOT. After i did so, I continued to flash the rom but probably made a noob move along the way because it got stuck at the HTC boot logo. I turned my phone off and then booted into recovery again but then got the error that 4ext was booting into safe mode because it could not mount the sd card. I did a bit of research and came across a thread that said to reflash 4ext and so I did. Now when I'm trying to boot into recovery, I get stuck at HTC boot logo again. At this point all I can boot into is HBOOT. Is there anything I can do or is my phone pretty much bricked?
My HBOOT version is currently 1.93.002.
Thanks.
Click to expand...
Click to collapse
S-ON or off?
Sent from my HTC_Amaze_4G using xda premium
ravike14 said:
S-ON or off?
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
Sorry forgot to mention it, S-ON
vkhemlani96 said:
Sorry forgot to mention it, S-ON
Click to expand...
Click to collapse
Unbranded or?
Sent from my HTC_Amaze_4G using xda premium
ravike14 said:
Unbranded or?
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
Nope. TMo branding.
vkhemlani96 said:
Nope. TMo branding.
Click to expand...
Click to collapse
If 4ext boot in safe mode it means your system partition or some other partition is corrupted the safest way to fix it is by running a ruu since your t mobile you won't face much trouble just lock your bootloader and run a t mobile ruu R2 is the latest
Sent from my HTC_Amaze_4G using xda premium
ravike14 said:
If 4ext boot in safe mode it means your system partition or some other partition is corrupted the safest way to fix it is by running a ruu since your t mobile you won't face much trouble just lock your bootloader and run a t mobile ruu R2 is the latest
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
Well i cant get into 4ext at all now.
But i do have a few questions if you dont mind:
Would i lock it simply by doing fastboot oem lock in command prompt?
So the ruu would be the first one under tmobile on this site: http://forum.xda-developers.com/showthread.php?t=1617644?
And could you link me to or give me a quick tutorial on how to flash the ruu without being able to get into 4ext?
Sorry im kind of a noob at this.
vkhemlani96 said:
Well i cant get into 4ext at all now.
But i do have a few questions if you dont mind:
Would i lock it simply by doing fastboot oem lock in command prompt?
So the ruu would be the first one under tmobile on this site: http://forum.xda-developers.com/showthread.php?t=1617644?
And could you link me to or give me a quick tutorial on how to flash the ruu without being able to get into 4ext?
Sorry im kind of a noob at this.
Click to expand...
Click to collapse
Yes that's how you relock it.. Ignore the s off and super cid thing... Just follow from step 6 onwards and it's linked to the r2 ruu so download that.. http://forum.xda-developers.com/showthread.php?p=38516167
Don't forget to hit a thank on that post!!
Sent from my HTC_Amaze_4G using xda premium
So if I update twrp2.5 to 2.6 using bootloader method after I do install it isn't going to let be boot phone only to bootloader correct? Because of the img file I will put on SD card. So before I do this I just want to make sure all I do after update is complete pull SD card an then boot to rom re install SD card an delete?? Or is there a easier way
S-off dirty 2.09
Latest everything besides touch panel
Tigerstown said:
So if I update twrp2.5 to 2.6 using bootloader method after I do install it isn't going to let be boot phone only to bootloader correct? Because of the img file I will put on SD card. So before I do this I just want to make sure all I do after update is complete pull SD card an then boot to rom re install SD card an delete?? Or is there a easier way
S-off dirty 2.09
Latest everything besides touch panel
Click to expand...
Click to collapse
You can reboot your phone once you're done and delete the file with a file manager. The only issue you'll have is if you reboot the bootloader.
Sent from my EVO using xda premium
FinZ28;43731 can reboot your phone once you're done and delete the file with a file manager. The only issue you'll have is if you reboot the bootloader.
Sent from my EVO using xda premium[/QUOTE said:
So after update is completed just reboot phone bootloader then delete file before I go back to boot loader. Really I delete right away in case I have to recover to boot loader to access recovery correct. Thanks for quick response too'
Click to expand...
Click to collapse
Tigerstown said:
So after update is completed just reboot phone bootloader then delete file before I go back to boot loader. Really I delete right away in case I have to recover to boot loader to access recovery correct. Thanks for quick response too'
Click to expand...
Click to collapse
Yes, delete it once you reboot your phone:thumbup:
Sent from my EVO using xda premium
I can't find the 2.6.0 bootlooder IMG file no where to download. Is there somewhere someone could point me too
Sent from my GT-P3110 using xda premium
Tigerstown said:
I can't find the 2.6.0 bootlooder IMG file no where to download. Is there somewhere someone could point me too
Sent from my GT-P3110 using xda premium
Click to expand...
Click to collapse
Go here:
http://forum.xda-developers.com/showthread.php?t=2370642
Sent from my EVO using xda premium
Why not use GooManager? It will correctly install the Recovery Image for you. I can see that you want to push it via command but GooManager is excellent. Just another option, good luck. :good:
dteze88 said:
Why not use GooManager? It will correctly install the Recovery Image for you. I can see that you want to push it via command but GooManager is excellent. Just another option, good luck. :good:
Click to expand...
Click to collapse
goo.im has been flaky recently I have not used goomanager in over a year
I always fastboot flash the new version of twrp
dteze88 said:
Why not use GooManager? It will correctly install the Recovery Image for you. I can see that you want to push it via command but GooManager is excellent. Just another option, good luck. :good:
Click to expand...
Click to collapse
They only way I ever done it is fastboot flash. I have heard bad things bout GooManager. My wife is s-on still she is scared to let me do it to her phone lol. I have never updated hers can I do it the same way I do my S-off dirty phone?
Sent from my EVO using xda premium
Tigerstown said:
They only way I ever done it is fastboot flash. I have heard bad things bout GooManager. My wife is s-on still she is scared to let me do it to her phone lol. I have never updated hers can I do it the same way I do my S-off dirty phone?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
If her phone is unlocked you can fastboot flash twrp
Also flashing a PJ75IMG.zip is different then fastboot flashing
Sent from my Eliptic Nexus 7
bigdaddy619 said:
If her phone is unlocked you can fastboot flash twrp
Also flashing a PJ75IMG.zip is different then fastboot flashing
Sent from my Eliptic Nexus 7
Click to expand...
Click to collapse
Ok I meant to put flashing g PJ75IMG IS the way I done it before. I was reading your reply an just typed that in my response on mistake lol. her phone is unlocked via htcdev. So I have to fastboot flash twrp. Now I do some research on fastboot flashing for her. I really like this site
Sent from my EVO using xda premium
Hey!
I hoped that I won't need to write here about this, but i encountered a problem when rooting my HTC. The problem is when I want to load into 4ext or cmw, it just dosen't load. It starts then "dies out" and boots up normally. Unitl now i followed this steeps (http://forum.xda-developers.com/showthread.php?t=1813818), even though I have GSM shooter_u edition. I also tried this one (http://www.youtube.com/watch?v=N8Qx18x4uM4) but without success.
Please help!
So are you unlocked?
Did the recovery flash successfully?
Does it actually turn itself off?
Are you typing an adb command, or using the bootloader menu?
Sent from my PG86100 using xda app-developers app
hossman said:
So are you unlocked?
Did the recovery flash successfully?
Does it actually turn itself off?
Are you typing an adb command, or using the bootloader menu?
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Yes I unlocked it easily, I'll upload video so that you'll see exactly what I did and what happens. And also recently adb has also started somehow chrasing as you'll see and all files are from previous xda post which I linked.
And since I didn't post 10 posts, I cant publish links outside of this forum, so you'll have to delete few spaces in this link. youtu be/cmZ359uLCA8
Come on some one must know why is this not working! So what happens with my phone (if you dont want to watch video, because you think it is spam). I paste in following commands "adb push recovery.img /sdcard/" (it works, every thing is done in about 3.75 sec), then "adb reboot bootloader" (dose work) and then I enter "fastboot flash recovery recovery.img", does everything fine but when I revoer it, it starts loading, but the after 10 sec screen just goes black and it reboots again in android.
I don't understand why you're pushing to your sd card. When I flash recovery it is in SDK-tools folder, not on sd card
Is your phone CDMA or GSM
Sent from my PG86100 using xda app-developers app
I think there is a way to flash through bootloader as a pg86img but I'm not 100%
Sent from my PG86100 using xda app-developers app
hossman said:
I don't understand why you're pushing to your sd card. When I flash recovery it is in SDK-tools folder, not on sd card
Is your phone CDMA or GSM
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
It's GSM, I pushed it to sd card because it was in instructions.
Ok, how about a link to the instructions you ar using.
What folder are you using for adb
If your Rom still boots, you could try flash image GUI
Try a different recovery, check md5
Run ruu if none of that workd
Sent from my PG86100 using xda app-developers app
hossman said:
Ok, how about a link to the instructions you ar using.
What folder are you using for adb
If your Rom still boots, you could try flash image GUI
Try a different recovery, check md5
Run ruu if none of that workd
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
I've already linked them in first post.
How do i do that?
Already tried one more.
Can you please link it..
vex3um said:
I've already linked them in first post.
How do i do that?
Already tried one more.
Can you please link it..
Click to expand...
Click to collapse
you were following a cdma guide??
you should probably follow this guide if youre gsm, make sure you are using the correct files for gsm
http://forum.xda-developers.com/showthread.php?t=1535987
i wasnt thinking at the time, but you cannot use flash image gui without root
hossman said:
you were following a cdma guide??
you should probably follow this guide if youre gsm, make sure you are using the correct files for gsm
http://forum.xda-developers.com/showthread.php?t=1535987
i wasnt thinking at the time, but you cannot use flash image gui without root
Click to expand...
Click to collapse
Hey!
I've finally rooted it. I found this one http://forum.xda-developers.com/showthread.php?t=1994301, which has 1.53 hboot. Thanks anyway!