Related
Hello;
i search up and down and i dont find any official rom for JXD S9100. here is 2 isusses
a. if there's any other rom to flash the device with.which rom is better and which one is rooted or could be rooted .
b. this device is not going to rom recovery mode.with volume up and power or volume down or even power with back buttom.so how could i flash it with supposed rom.
xgeek.cub said:
Hello;
i search up and down and i dont find any official rom for JXD S9100. here is 2 isusses
a. if there's any other rom to flash the device with.which rom is better and which one is rooted or could be rooted .
b. this device is not going to rom recovery mode.with volume up and power or volume down or even power with back buttom.so how could i flash it with supposed rom.
Click to expand...
Click to collapse
Check the link in my signature
Thanks but there are two issues:
Is anyone wrote especial time for this device. If not how could I write my own rom. Preferably the 4.0.4.
The second one is the version of android that Mapan has. What is the android version on that rom.
And also is an English version of livesuite pack. I have one but it is chinese.
Really thanks for your answer.
(^ム^)
xgeek.cub said:
Thanks but there are two issues:
Is anyone wrote especial time for this device. If not how could I write my own rom. Preferably the 4.0.4.
The second one is the version of android that Mapan has. What is the android version on that rom.
And also is an English version of livesuite pack. I have one but it is chinese.
Really thanks for your answer.
(^ム^)
Click to expand...
Click to collapse
Livesuite-- The one in the link on my guide is in English.
Also the version on the Mapan site is 4.0.4
You could check over at TechKnowForum. There is quite a bit of info there about these generic tabs...
more info
restlessrob you are a life saver.
but I would be happy to have a link that you directed me to.
and what is the mapan CPU overclock ratio? 1.2 or 1.GHZ
but important stuff
could I change the cpu rate after installation of rom?
I heard I have to use something called LCD density moder. what is it where could I get it
and what is the values for my tablet to set within?
is it possible to change the internal device memory with trade?
P's: i found a ciyogen mode for alllwinner a10 what is it? is it a firmware like mapan!? ♡(^ム^)♥
I never got that far. I got the kindle and so gave the tablet to my mum. I believe it to be 1.0 I am not sure.
Sent from my KFTT using Tapatalk 2
info
Hello there,
Thanks for you your kindness.
I did flash with both rom.
Both are great mapan has some power in it. Nice governer battery. Also nice kernel defenetly no shen. More speed in it. And more organized defenetly great backbone.
And freelander sweet as a honey and smooth as a butter. Very very nice reselution. Indeed nice battery usage. Nice fonts and so much speed and agility. Defenetly compatible with EA and Gameloft games. Top speed. Thought nothing to be picky about it comes with five chinese app which are are in dalvick and can not be removed but you can freeze the sweet by titqnum backup.
I HOPE HERBY THAT FREELANDER HEARS ME AND CONTINUES TO BUILD FIRMWARE FOR FREELANDER PD60.
Please someone tell them.:silly:
Ps: mapan doesn't have any chinese or additional app.
Do you know if any other firmware matches our device?
Hello again
Ps
Mapan is clocked at 1and freelander at 1.2 but you can easy could root the newly flash device install a cpu overclocking app and change the frequency but don't go over 1.2¡¡¡¡¡¡¡
hi guys i have de freelander pd60 but i got some issues with the freelander rom on pandawill
livesuit didn't reckognise it so i can"t install it where did you find your firmwares ??
can you give me a link ?
Hello my dear friend
It is a common mistake which I did it it the last time.
You should only use what is provided by the rom company you choose.
Ie. If you want to flash the pd60 rom use the very only livesuit which they provide .
and in their livesuite, you can find the usb driver.
after you flashed, For usb debuging mode driver go to folder named usb-driver out side the livesuite not in it.
It is worth to note you could use usb driver inside the livesuite of mapan mx913 for flashing time. Only for flash not the usb debugging driver which mapan provided.
TABLET OFF VOL- then CONNECT THE TABLET TO PC then install the DRIVER
TABLET OFF, VOL+ then CONNECT THE TABLET TO THE PC to make Livesuit find the tablet
link
egguibs said:
hi guys i have de freelander pd60 but i got some issues with the freelander rom on pandawill
livesuit didn't reckognise it so i can"t install it where did you find your firmwares ??
can you give me a link ?
Click to expand...
Click to collapse
PHP:
http://www.pandawillforum.com/soft/PD60%20smart%20120801%281%29.rar
http://pan.baidu.com/share/link?shareid=191236&uk=2351629104
both are the same.
i think you have the issue with the driver. i that case you should use the drivers come with th MAPAN MX 913 in here:
PHP:
http://index.maixin-china.com/download/software/MX710A%20Update%20Tool%202012.rar
http://index.maixin-china.com/download/software/MaPan_MX913_Firmware_201212.rar
Sorry the second batch of link is wrong. i mean they are rom
the link is
PHP:
http://index.maixin-china.com/download/software/win7_UsbDriver_For_MaPan.rar
TABLET OFF VOL- then CONNECT THE TABLET TO PC then install the DRIVER
TABLET OFF, VOL+ then CONNECT THE TABLET TO THE PC to make Livesuit find the tablet (if you do it right the live suit start to flash by itself just don't forge to say yes to format the internal disc). :beer:
Q&A for RK3066 Tab Genio by Oma rocks !
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Hey, I am new here. (I apologise for my bad english)
I have an a Xvision 101p11c i wanted to know if is there a kernel for this tablet.
res: 1280*752
rk3066
same wifi chip
screen and touch chips i can find it
please =/
Good time of day. Possible to alter the firmware for the installation of the recovery?
@oma
The latest CM10.1 v. 1.4 include HW accellaration?
Thanks
Thanks OMA!!
You made my day, my two Pipo S2 works like a charm now!
Thanks for your great work!
I also have an Measy stick based on RK3066, is there any firmware for this gadget to?
Regards // Cyberott
Dear sir i need this tablet rom
Dear boss
i need this tablet rom
Ds733-v3.0 2012.10.08
please sahre this rom
i need very very urgtently
thanks you very much
YuanDao N101II
Hello Oma, first of all thanks for your work. I flashed ROM for my Yuandao N101 II tab based ono your work I got from VonDroid - unfortunately the touch screen didn't work. It worked neither with your rom nor with the newes original firmware. As this was described by some other folks there - for some specific sub-model maybe - and as the touchscreen works with an older stock-rom - this seems to be software-related.
Is there any possibility to overcome this issue? The firmware that is working gives me infrequent hangs for no reason and was described as buggy by other users, too.
Thanks a lot in advance for your help
pmp 5780d_duo
HI to all . i am new here ,i have this tablet prestigio 5780d_duo .i wanted to flash other rom then this official s..... can some one plz tell me which rom is best for this tablet,and plz give me link for rom and kernel. ty in advance
HELP :C
Hi Sir Oma good day
im using your CM10.1 for rk30
i have only one bug the brightness i already reflash the boot.img on your page
and flashed the brightness fix via CWM
but the thing is it doesnt work my tab has full brightness and my battery is
too fast to drain can you make a fix for me?
im using oplus 9.76 from philippines
if you need my kernel here it is
Again the unresponsive touch screen
Hi @ all, as specified in my last post there is a difficulty with the touchscreen with a version of omars great fw that has been ported to VonDroid with minour changes. So, to find out if my tablet's touchscreen can work with this fw, I dug a bit deeper and located the touch screen driver.
input: Goodix Capacitive TouchScreen as
/devices/virtual/input/input3
<<-GTP-INFO->> GTP Driver Version:V1.0<2012/05/01>
<<-GTP-INFO->> GTP chip version:GT81XNI_3R19_000
The only documentation I could find so far is that documentation for this device is lousy and chaotic as is supply with drivers... seems to be quite a fair description. Until now, I found no way to locate additional hints about what touch screen might be built in my tab. Neither online nor on the tablet itself.
Anyhow, some questions came to my mind on and on again, as the last fw supporting the touchscreen is a tiny little bit buggy:
Might there be a chance that the specified touch screen works with the fw? If no: Is there a possibility to configure the fw in a way that it will work?
It would be very nice to find out more on that as I don't want to simply do the same procedure as I did last time: spending about two days to install the same old buggy fw in the end. This is definitely not satisfying.
Thanks a lot for any hint - I tested the fw with mouse and keyboard, but that's no way for working long time if you know you've got a touchpad. Nonetheless, it was long enough to get quite surprised what my tablet is capable to do - and willing to do some work for having these capabilities
Meanwhile, I'll dig deeper
[edit] Guess I found some metal - hope, it's silver at least...
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/gt968.c
Goodix driver Version 1.0 .
Is there a possibility to add that to the rom? Woud be great...[/edit]
[edit2] maybe it's rather one of these drivers - at least the build date is the same my machine specifies.
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/goodix_tool.c
github.com/crewrktablets/rk30_kernel/blob/master/drivers/input/touchscreen/gt801plus_819_8105_8110_update.c
help me with my screen rotation
heres my new sensor reading
- tab vertical, landscape (y=+9.4)
- turn left to portrait (x=+9.7)
- turn right to portrait (x=-9.6)
- tab horizontal screen up (z=+10.0)
when i tilt my tab to +y my screen got reverted to -y same with x axis. ive dscovered that my y axis is portrait not landscape just like phones axis direction
Icoo d90pro
How can i use your firmware on my device ICOO D90PRO ? I would like to get OC kernel compatible on my device and other . . . Thanks !
USB Host Modem
Hello
I'm using OmniRom 4.4.4. v1.3 on my rk3066 PiPo Max M1. It works flawlesly, but there is one thing that bothers me. With stock 4.2.2 chinese rom I've been using usb modem(HUAWEI) to connect to the internet, which I've been connecting to HOST port.
After flashing OmniRom, the usb modem does not work. It does show up in USB Host Controller app, the storage in stick, works too, but it won't find mobile network. It gives me an error when searching for network.
Is there some setting that I should set or anything else to get it to work?
lazyNeighbour said:
Hello
I'm using OmniRom 4.4.4. v1.3 on my rk3066 PiPo Max M1.
Click to expand...
Click to collapse
Could you post the link of this ROM? I'm very interested.
Petitgibus said:
Could you post the link of this ROM? I'm very interested.
Click to expand...
Click to collapse
Here http://forum.xda-developers.com/showpost.php?p=54300296&postcount=1118
Does anyone has a discolored yellow screen when using AOSP JB 3.4 for RK3066?? If yes is there a solution for this ??
Sent from my WT19i using xda premium
Multiple Tablet Supported or Specific
Sir
This ROM is specific for PIPO tab or I can use it with other RK3066 Tablet ? I have APPTAB And no firmware is available on internet . So Can i Upload your Custom ROM, ?
ahtisham200 said:
Sir
This ROM is specific for PIPO tab or I can use it with other RK3066 Tablet ? I have APPTAB And no firmware is available on internet . So Can i Upload your Custom ROM, ?
Click to expand...
Click to collapse
Before flashing anything do a backup from your stock firmware. You can google about how.
Usually changing the kernel.img for the stock of your tablet and flashing the ROM it might work (sometimes wifi, etc. Not). Also is important to know if your kernel is 3.0.8+ or 3.0.36+.
Cheers
I have a problem
Hi Oma! I have an Manta MID702 , but when i install your cm 10.1 on it, it boots, but i cant use the tablet cause there is a message: android.com.phone process has stopped. It reappears every time i close it. What can i do? Thanks in advice
To sum it up once more: I've got a touch screen that works with the original firmware but won't respond on the other roms. Problem: The original firmware is lagging and quite frequently simply coming to a halt.
Loewe_78 said:
input: Goodix Capacitive TouchScreen as
/devices/virtual/input/input3
<<-GTP-INFO->> GTP Driver Version:V1.0<2012/05/01>
<<-GTP-INFO->> GTP chip version:GT81XNI_3R19_000
[edit2] maybe it's rather one of these drivers - at least the build date is the same my machine specifies.
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/goodix_tool.c
github.com/crewrktablets/rk30_kernel/blob/master/drivers/input/touchscreen/gt801plus_819_8105_8110_update.c
Click to expand...
Click to collapse
Is there a possibilitäy to built a firmware that has the driver for the digitizer I specified? Would be great. I've got the orignal firmware.
Hello,
i recently bought a smartphone from Ali.
It's a MPIE M15 with MTK6595 (CPU-z is agree). Here's the specs :
Android Version : 5.0.0
Baseband : MOLY.WR8.W1315.MD.WG.MP.V43, 2014/09/17 10:10
Kernel : 3.4.67 [email protected] #1
Build Number : A100-HYDY 20150627-155331
Custom Build Version : 1435391497
Hardware : mt6595
After test, it's already rooted, i can access to Android Recovery.
The problem is that the installed rom is a Chinese Android version.
i want to install the factory Android Lollipop, but i cant find any version for my phone.
CyanogenMod installation via recovery have a OTA error..
So with my specs, is that possible to run another rom, like the Official Android (5.1?) and how to do it?
Thanks for your answer
Update
I understand that i have to install a custom recovery, but now i have a new problem..
MTK Droid Tools says the hardware is fake in Kernel or Firmware rolleyes not corresponding to the phone..
How to format all the phone, i want the Android Official Firmware on it, how to do that please ?..
OK MTK Droid Tools recognize my phone now. I do the backup for a custom TWRP recovery. if anyone know a link the original image of android .zip, thank you to tell me..
i continue :cyclops:
Ksaverii said:
OK MTK Droid Tools recognize my phone now. I do the backup for a custom TWRP recovery. if anyone know a link the original image of android .zip, thank you to tell me..
i continue :cyclops:
Click to expand...
Click to collapse
Please write if you find the program Im interested in purchasing that phone, but don't want to learn chinese
By the way, how that phone looks like in real life? All options works normally?
Hello, after two days working on the phone, i'm almost there.
First, this phone is faking his own components.
It's sold for a MTK6595, in fact it's a MTK6572. Same for Android, it's KitKat, not Lollipop. Not sure about the RAM (maybe 2Go). 1 virus app (AVG). Chinese stuff installed. I bought it 85$ from Ali (i understand now^^). The Camera is sh**, really! (but photo is not a prob for me).
Im not an experimented dev, the phone seems to be block somewhere, it's very hard to launch a custom recovery. I extracted the Stock ROM with MTK Droid Tools.
Finally, I install a custom recovery after a day of search, the Carvil Touchscreen and make it stable for the mPie. Now i want to install a Custom Rom on it, after replace the boot.img from Stock to Port, i have to modify the kernel, i will see..
If i managed a custom rom to get worked, i will post a tuto, if someones are interested
i continue :cyclops:
Ksaverii said:
Hello, after two days working on the phone, i'm almost there.
First, this phone is faking his own components... If i managed a custom rom to get worked, i will post a tuto, if someones are interested
i continue :cyclops:
Click to expand...
Click to collapse
Thanks for response. I wanted that phone for my kid, to let him play android games instead of killing my own phone with that trash
keramik said:
Thanks for response. I wanted that phone for my kid, to let him play android games instead of killing my own phone with that trash
Click to expand...
Click to collapse
I found a original custom rom for this on needrom, but the phone still faking his hardware.. The kernel is fake and i don't know what to do now.
It's not a Mpie M15 (fake), it's a Mpie Mp S-168, on KK.
If anybody got scammed with the Mpie M15, i backup my device 10 times, i have a stock rom for
How to install a genuine kernel to a MT6572 (MT6595 is fake) ?
Thanks
Hello. I also bought the phone. now we have to change the firmware. if you have the opportunity to specify where to get the firmware for this phone?
Hello all,
I recently bought an allcall rio from gearbest and like any smartphone that comes from gearbest it arrived with some bloatware (google admob) which made the phone terribly slow. Because i had some experience flashing roms on my OPO. I tried to flash a ROM that I found on allcall forum (in which they said was updated and didn't contain any bloatware). I followed their tutorial but touch became unresponsive so now I have to use an optical mouse with OTG cable in order to operate the phone. Later I tried to flash again another ROM, an older one that i found on needROM site but somehow ended having to de-solder the battery to flash "official" rom again. After flashing this last ROM, I was able to use the phone (with optical mouse only) and applied the OTA update available hoping that would solve the touch problem, but it didn't.
This is a MT6580A based phone, with android 7.0.
Appreciate any help
I have similar problem but my LCD is black on my ALLCALL S1 - also after flashing official firmware :/
So i think that for both of us is allcall big NO !
NMPG said:
Hello all,
allcall rio MT6580A based phone, with android 7.0.
Appreciate any help
Click to expand...
Click to collapse
Hi this is for sure firmware problem so try this one to flush but before that Wipe cache partition from recovery .
http://www.mediafire.com/file/cks7q7saekoosc0/AllCall_Rio_MT6580_20170808_7.0.zip
Good luck
---------- Post added at 12:35 PM ---------- Previous post was at 12:32 PM ----------
G_0phy said:
I have similar problem but my LCD is black on my ALLCALL S1 - also after flashing official firmware :/
So i think that for both of us is allcall big NO !
Click to expand...
Click to collapse
Also you can try with another firmware :
http://www.mediafire.com/file/fm6wto42klr4w4d/AllCall_S1_MT6580_20180817_8.1.0.zip
Good Luck
Yeah, that's the one i tried to flash, there aren't any newer versions on internet. I need rom for allcall s1 X <- that X version has newer/different display - uses different drivers, so most likely that's the reason why i have black screen...
Only version on internet : V1.10_20180817 (Don't supports S1 X)
Version i had : V1.3_20180912 (Isn't on the internet, still trying to contact allcall support)
Device name ALLCALL_S1_X (Only in settings-about device, didn't know that it is different than S1, on the box and everywhere else it says S1 without X... )
If there is anybody who could upload that firmware somewhere that would be AWESOME !
G_0phy said:
Yeah, that's the one i tried to flash, there aren't any newer versions on internet. I need rom for allcall s1 X <- that X version has newer/different display - uses different drivers, so most likely that's the reason why i have black screen...
Only version on internet : V1.10_20180817 (Don't supports S1 X)
Version i had : V1.3_20180912 (Isn't on the internet, still trying to contact allcall support)
Device name ALLCALL_S1_X (Only in settings-about device, didn't know that it is different than S1, on the box and everywhere else it says S1 without X... )
If there is anybody who could upload that firmware somewhere that would be AWESOME !
Click to expand...
Click to collapse
I also flashed Teddy Lo ROM with success, but with same result, everything boots fine but still no touch screen... I think I may have messed up the partitions... maybe something persists on some dark corner of phone that doesn't allow to overwrite when flashing new ROMs to get LCD and touch screen drivers...
G_0phy said:
Yeah, that's the one i tried to flash, there aren't any newer versions on internet. I need rom for allcall s1 X <- that X version has newer/different display - uses different drivers, so most likely that's the reason why i have black screen...
Only version on internet : V1.10_20180817 (Don't supports S1 X)
Version i had : V1.3_20180912 (Isn't on the internet, still trying to contact allcall support)
Device name ALLCALL_S1_X (Only in settings-about device, didn't know that it is different than S1, on the box and everywhere else it says S1 without X... )
If there is anybody who could upload that firmware somewhere that would be AWESOME !
Click to expand...
Click to collapse
Hi dude probably your device use MT6582 chip instead MT6580 so try this firmware for MT6582
https://drive.google.com/file/d/1vxACZ6SSpRi-uSsVVWgqvjF3gGEjGBZj/view
password : https://mega.nz/#!2nZGkZAI!-TrXlG1iU0-g7yZkcZGU0FdR68Gw7nUp-5J2bBcKAqY
Hope this is the right one bacause I didn't find any for S1 x so that X sign I think is for S1 clone version which use MT6582 but I'm not sure ...
Let me updated what you have done ... Good Luck
I am assuming you flashed an incorrect/corrupt version of the ROM and the touch drivers might be different in that version. Try finding another version and see if it fixes it.
nkomarn said:
I am assuming you flashed an incorrect/corrupt version of the ROM and the touch drivers might be different in that version. Try finding another version and see if it fixes it.
Click to expand...
Click to collapse
I flashed almost every allcall rio mt6580 ROMs I could find out there with the same result... Don't know what to do anymore
Teddy Lo said:
Hi dude probably your device use MT6582 chip instead MT6580 so try this firmware for MT6582
https://drive.google.com/file/d/1vxACZ6SSpRi-uSsVVWgqvjF3gGEjGBZj/view
password : https://mega.nz/#!2nZGkZAI!-TrXlG1iU0-g7yZkcZGU0FdR68Gw7nUp-5J2bBcKAqY
Hope this is the right one bacause I didn't find any for S1 x so that X sign I think is for S1 clone version which use MT6582 but I'm not sure ...
Let me updated what you have done ... Good Luck
Click to expand...
Click to collapse
No, it's MT6580, phone works, even touchscreen works (talking about S1 X) but LCD drivers are different...
I need firmware for Chinese tablet call touch
board no : tw_j0750bsa_v22_20160531
CPU : ATM7051
why there are no replay ?
please help me
ashraf61279 said:
why there are no replay ?
please help me
Click to expand...
Click to collapse
Might be difficult to find. ??
So, what works and what doesn't?
Can you enter the recovery mode? Then you could possible dump the partitions and see the problem...
CXZa said:
Might be difficult to find. ??
So, what works and what doesn't?
Can you enter the recovery mode? Then you could possible dump the partitions and see the problem...
Click to expand...
Click to collapse
thank you for your reply
this TW J0750BSA V30 firmware work for me but with no touch screen work
i think ATM7051 K88 v1.6 may work fine but i can not find it for free ..
please if you can help me to find ATM7051 K88 v1.6 so i will try it
thank you again
Hmm... I seem to have met this atm7051 before..
Actions Tablet Tools
Actions' PAD Product Tools (Developer Editions) Download 1.01.02 http://yadi.sk/d/wn0y5BdtFmQy9 2012-12-25? (Use newer versions for Ainol firmwares) 1.02.02 http://yadi.sk/d/Xf5NVryz998nC 2013-01-08? (Hero 4 nuclear upgrade tool) 1.02.03 http://yadi.sk/d/GFpAmhs39QZ67 2013-01-28? 1.02.04...
www.slatedroid.com
Flashing firmware blindly is a bad idea. Some damage can happen. There have been some cases of touch module has flashed a new firmware or changed touch settings so that the touch doesn't work anymore.
You could try this old thing... it's from year 2014 do it might not work though. (Should update it to use newer detecting modules from some newer Actions' firmware, but it probably isn't worth it anymore)
Tool: Touch and G-sensor Module Detector
Flashed a wrong firmware and the touch and/or g-sensor doesn't work? Here is a simple tool that tries to reveal the names of the modules needed. Flash in recovery mode. Download: http://yadi.sk/d/2M9WVoEIboAmZ Too bad that there are lots of different modules with the same name. But still, it...
www.slatedroid.com
CXZa said:
Hmm... I seem to have met this atm7051 before..
Actions Tablet Tools
Actions' PAD Product Tools (Developer Editions) Download 1.01.02 http://yadi.sk/d/wn0y5BdtFmQy9 2012-12-25? (Use newer versions for Ainol firmwares) 1.02.02 http://yadi.sk/d/Xf5NVryz998nC 2013-01-08? (Hero 4 nuclear upgrade tool) 1.02.03 http://yadi.sk/d/GFpAmhs39QZ67 2013-01-28? 1.02.04...
www.slatedroid.com
Flashing firmware blindly is a bad idea. Some damage can happen. There have been some cases of touch module has flashed a new firmware or changed touch settings so that the touch doesn't work anymore.
You could try this old thing... it's from year 2014 do it might not work though. (Should update it to use newer detecting modules from some newer Actions' firmware, but it probably isn't worth it anymore)
Tool: Touch and G-sensor Module Detector
Flashed a wrong firmware and the touch and/or g-sensor doesn't work? Here is a simple tool that tries to reveal the names of the modules needed. Flash in recovery mode. Download: http://yadi.sk/d/2M9WVoEIboAmZ Too bad that there are lots of different modules with the same name. But still, it...
www.slatedroid.com
Click to expand...
Click to collapse
thank you for helping me ,, but it still no good news ,,,
please can you find ATM7051 K88 v1.6 for me
Cannot find that, sorry. I found one v1.2 forgotten to my disk. But using it hoping for the best would be wild goose chase.
v1.6: Why do you think it would work then?
Made another detector zip that use one touch detecting module more.
Taken from that 7051 kk firmware. Added also some touch modules to the package from two different kitkats.
See also your device's misc/modules folder what ctp_*.ko files is there. Sometimes manufactures just use the right module without using the ctp_detect.ko.
ACTIONS Modules Detector2. Flash in recovery mode.
Yandex
Finds everything
disk.yandex.com