My phone appears to have stopped working. I have a custom ROM and it gets stuck on the boot screen (Samsung Logo)
I can get the phone into Download mode how ever when I run the PDA I recieve the following
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMA2_I9300OPSEMA1_I9300XXELLA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1).
Does anyone know what I can do to fix this?
Soft brick. Easy to fix browse the forum for tutorial if you cant find, pm me.
Sent from my GT-I9300 using xda premium
You have certainely check the case "Re-partition" in ODIN when you have try to flash the device. If the case "PIT" was empty, it only deletes the PIT file and you get soft-bricked.
To recover your phone, you must provide to your phone the PIT file (partition information file). You can easily find it on XDA:
Can you enter recovery mode?
Sent from my GT-I9300 using xda app-developers app
Related
Good day fellas,
I sold my S advance and get S2,
my friend 'updated' to 4.0.3 and it sucks and sofa king slow.
I tried to revert back to GB 2.3.6 but failed.
I use Odin and download files from internet.
still nothing works, I cant even reset to 4.0.3
I just want to use my phone now.
doesnt matter what it takes GB or ICS or custom ROM
the phone still can go to download mode, but could not boot for now
I guess I already screw the OS.
Please need advise from you guy,
now being very sad cannot use my phone
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9100XWKK5_CL754841_REV02_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9100XWKK5_CL754841_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI4_REV_02_CL1065910.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Rempit said:
Good day fellas,
I sold my S advance and get S2,
my friend 'updated' to 4.0.3 and it sucks and sofa king slow.
I tried to revert back to GB 2.3.6 but failed.
I use Odin and download files from internet.
still nothing works, I cant even reset to 4.0.3
I just want to use my phone now.
doesnt matter what it takes GB or ICS or custom ROM
the phone still can go to download mode, but could not boot for now
I guess I already screw the OS.
Please need advise from you guy,
now being very sad cannot use my phone
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9100XWKK5_CL754841_REV02_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9100XWKK5_CL754841_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI4_REV_02_CL1065910.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
please follow these steps here http://androidflip.com/how-to-install-flash-firmware-on-samsung-galaxy-s-2-gt-i9100/
what steps did you do prior to flashing with odin. ?
Did you wipe chache and davik chache ?
did you do a reset/data format ?
flash your file with odin.
if these to steps did not work.
You need to go into recovery do a complete format of your internal sd, then flash with odin. it will work then.
saywhatt said:
please follow these steps here http://androidflip.com/how-to-install-flash-firmware-on-samsung-galaxy-s-2-gt-i9100/
Click to expand...
Click to collapse
I did follow all the step before. but it does not seems to work. btw, the link to those files inside the guide has been removed by hotfiles
Rempit said:
I did follow all the step before. but it does not seems to work. btw, the link to those files inside the guide has been removed by hotfiles
Click to expand...
Click to collapse
You can use the steps, but instead use another file from sammobile.com
Sent from my GT-I9300 using xda premium
I have one Galalxy s3 I9300 no working I try software on odine but flashing fail see this log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
make sure things like usb debugging are on in the dev options.
aboody712 said:
I have one Galalxy s3 I9300 no working I try software on odine but flashing fail see this log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Q1. Why are you re-partioning your device?
Q2. If you are re-partitioning then are you using the 3 file method with mx.pit?
Q3. Have you tried different USB ports, cables, restarting your PC etc.?
I triad 3 flies with pit file same problem
zoot1 said:
Q1. Why are you re-partioning your device?
Q2. If you are re-partitioning then are you using the 3 file method with mx.pit?
Q3. Have you tried different USB ports, cables, restarting your PC etc.?
Click to expand...
Click to collapse
I triad 3 flies with pit file same problem
I second trying different USB ports. XXELLA took about 15 attempts before it passed for me
Sent from my GT-I9300 using xda app-developers app
Your phone is bricked. Most likely by the same thing which is causing the Sudden Death where it can't even reach Download mode. Take it to a Samsung Service centre to be repaired, and remember you've never heard of rooting, flashing, download mode, custom roms. You only know about XDA because a Google Search lead you to pages and pages of broken phones.
yess...your phone is bricked..same like mine last month..I sent to samsung centre..they change motherboard...
Hello
I've tried everything regarding an encryption error on my Galaxy SIII, I have tried several stock roms but I always get the same error.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH2_I9300UBEMH1_I9300UVYEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
It always gets stuck at system.img.
Please help!
ezekiel131 said:
Hello
I've tried everything regarding an encryption error on my Galaxy SIII, I have tried several stock roms but I always get the same error.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH2_I9300UBEMH1_I9300UVYEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
It always gets stuck at system.img.
Please help!
Click to expand...
Click to collapse
I have the exact same problem. Did you came out with a solution?
Can u boot ur fone? Did u factory reset like it said?
Sent from my GT-I9300 using xda app-developers app
I boot in recovery and download mode. I did not do factory reset like it said. I pressed the power off button.
rennyhernandez said:
I boot in recovery and download mode. I did not do factory reset like it said. I pressed the power off button.
Click to expand...
Click to collapse
Why did u not lol... So u can't boot normally?
Sent from my GT-I9300 using xda app-developers app
I can't boot normally. It freezes in Samsung logo. I tried to reinstall stock flash rom but nothing.
rennyhernandez said:
I can't boot normally. It freezes in Samsung logo. I tried to reinstall stock flash rom but nothing.
Click to expand...
Click to collapse
I've got the same problem.
I've been using OmniROM and TWRP for quite some time now.
I put the phone on charge and a few minutes later it was stuck on Samsung initial Screen with the usual red triangle. (Showing SAMSUNG Galaxy SIII GT-I9300)
I removed the charger and battery and restarted, it was still stuck on Samsung Boot Screen.
Any ideas how to recover the phone?
I have tried going through some of the other forum threads but most of them can't go to download mode. I can go into TWRP and download mode both. I tried recovering the phone using Kies "Firmware Initialization" but it generates "your phone cannot be upgraded to the latest version" and stops.
falconflyer82 said:
I've been using OmniROM and TWRP for quite some time now.
I put the phone on charge and a few minutes later it was stuck on Samsung initial Screen with the usual red triangle. (Showing SAMSUNG Galaxy SIII GT-I9300)
I removed the charger and battery and restarted, it was still stuck on Samsung Boot Screen.
Any ideas how to recover the phone?
I have tried going through some of the other forum threads but most of them can't go to download mode. I can go into TWRP and download mode both. I tried recovering the phone using Kies "Firmware Initialization" but it generates "your phone cannot be upgraded to the latest version" and stops.
Click to expand...
Click to collapse
Download stock rom from Sammobile and flash in Odin..
tallman43 said:
Download stock rom from Sammobile and flash in Odin..
Click to expand...
Click to collapse
Downloaded latest stock rom ML4 and this is what I get in Odin 3.09:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XWUGML4_I9300ODDGML4_I9300DDUGMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/038> Added!!
<ID:0/038> Odin v.3 engine (ID:38)..
<ID:0/038> File analysis..
<ID:0/038> SetupConnection..
<ID:0/038> Initialzation..
<ID:0/038> Get PIT for mapping..
<ID:0/038> Firmware update start..
<ID:0/038> SingleDownload.
<ID:0/038> sboot.bin
<ID:0/038> NAND Write Start!!
<ID:0/038> FAIL!
<ID:0/038>
<ID:0/038> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
falconflyer82 said:
Downloaded latest stock rom ML4 and this is what I get in Odin 3.09:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XWUGML4_I9300ODDGML4_I9300DDUGMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/038> Added!!
<ID:0/038> Odin v.3 engine (ID:38)..
<ID:0/038> File analysis..
<ID:0/038> SetupConnection..
<ID:0/038> Initialzation..
<ID:0/038> Get PIT for mapping..
<ID:0/038> Firmware update start..
<ID:0/038> SingleDownload.
<ID:0/038> sboot.bin
<ID:0/038> NAND Write Start!!
<ID:0/038> FAIL!
<ID:0/038>
<ID:0/038> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Nand write fail usually means dead emmc chip. You can try rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << but I think you need to send it fto service for repair.
tallman43 said:
Nand write fail usually means dead emmc chip. You can try rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << but I think you need to send it fto service for repair.
Click to expand...
Click to collapse
I tried the rescue firmware, similar result:
Code:
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Set PIT file..
<ID:0/014> DO NOT TURN OFF TARGET!!
<ID:0/014> FAIL!
<ID:0/014>
<ID:0/014> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I finally took to a repair shop, they say it is my fault since I rooted it (they can see the red exclamation mark), and will charge extra for "software change".
Any idea how to reset the counter in download mode, revert to stock recovery and remove the red exclamation mark in bootloader?
P. S. I read somewhere in case of dead emmc I shouldn't be able to see the device version in download mode. But I can..
bricked device i9300..
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CheckROM_V4_LG8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
it gets stuck for hours without any response ... can any one help please
dupri11 said:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CheckROM_V4_LG8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
it gets stuck for hours without any response ... can any one help please
Click to expand...
Click to collapse
Did you try Odin 3.09? I too get the same result as you with Odin 3.07. With 3.09 I get the write fail error.
falconflyer82 said:
Did you try Odin 3.09? I too get the same result as you with Odin 3.07. With 3.09 I get the write fail error.
Click to expand...
Click to collapse
I used the 3.09 still same problem am stuked up really
If the rescue firmware and pit didn't flash then your emmc chip is damaged, either new motherboard or phone.
Sent from my GT-I9300 using Tapatalk
falconflyer82 said:
I finally took to a repair shop, they say it is my fault since I rooted it (they can see the red exclamation mark), and will charge extra for "software change".
Any idea how to reset the counter in download mode, revert to stock recovery and remove the red exclamation mark in bootloader?
Click to expand...
Click to collapse
There must be a way to reset the download count by installing stock recovery. Maybe @Chainfire can help here.
Sent from my XT1033 using Tapatalk
dupri11 said:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CheckROM_V4_LG8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
it gets stuck for hours without any response ... can any one help please
Click to expand...
Click to collapse
what @boomboomer said is what you should consider.
If you keep on insisting, you will just damage the phone more ( i am talking from experience ) .
change motherboard or in some places, people can replace the emmc Chip for you.
Salam
These files are for the SM-S920L Straight Talk Variant. Do not use these on other variants!
Picked one of these up the other day and seen a lack of proper files, so I decided to make some.
Stock Boot:
http://archive.midnightchannel.net/zefie/files/cell/SM-S920L/Stock Odin/boot.zip
Stock Recovery:
http://archive.midnightchannel.net/zefie/files/cell/SM-S920L/Stock Odin/recovery.zip
Stock System (Untouched/Unrooted):
http://archive.midnightchannel.net/zefie/files/cell/SM-S920L/Stock Odin/system.zip
Stock System (Rooted with SuperSU, not KingRoot):
http://archive.midnightchannel.net/zefie/files/cell/SM-S920L/Stock Rooted Odin/system.zip
TWRP Recovery (Not my work):
http://androidforums.com/threads/twrp-3-0-2-0-sm-s920l-only.1023315/
TWRP Recovery (Fixed):
http://archive.midnightchannel.net/zefie/files/cell/SM-S920L/TWRP/TWRP v3.0.2.0.zip
This is a patched version of TWRP provided by edodson84 to fix bug #1 listed on his thread. It also fixes ADB.
--
To use these, unzip them, then flash in Odin (Available here: http://archive.midnightchannel.net/zefie/files/cell/SM-S920L/Odin_3.10.0.zip )
Choose AP, leave everything else default.
Odin/Download mode is Volume Down + Home + Power
You saved my phone ty
well crap
i have odin access but i am stuck in a twrp bootloop, but every attempt to flash to stock anything is met with SECURE CHECK FAIL
i'm hopeless and desperate, i have basically bricked my grand prime, does anybody know how i can just go back to good old comfy stock? i'm gonna freak out!
Thanks for posting these! Here I thought that our device would never see any development and now we have a mostly functional custom recovery at least.
Thank You
Thank you very much.These files totally saved my phone and my day.
the format the files unzip as are .img.ext4 and odin wont show them for selection when i try to choose them for flashing. what am i doing wrong?
Both system.zip files extract to system.tar.md5 which is what you need to flash in Odin. You are extracting the tar.md5 file which Odin will not flash.
bfoos said:
Both system.zip files extract to system.tar.md5 which is what you need to flash in Odin. You are extracting the tar.md5 file which Odin will not flash.=QUOTE]
rename tar.md5 to .tar and odin will install it.
Click to expand...
Click to collapse
Been some time since I've been here. Good to see progress.
I've been trying (and failing) to download the zips for recovery.Each time I try extracting,ES Explorer tells me files are corrupt.
Any other links 2 these files ?
Sent from my SM-S920L using XDA-Developers mobile app
dmbolsdboy said:
Been some time since I've been here. Good to see progress.
I've been trying (and failing) to download the zips for recovery.Each time I try extracting,ES Explorer tells me files are corrupt.
Any other links 2 these files ?
Sent from my SM-S920L using XDA-Developers mobile app
Click to expand...
Click to collapse
Extract with 7 zip on pc. The files are fine I use them myself
Thanks.Got it figured out.Anyyhing found out about OTG on these phones ? Everything I throw at it says OTG capable,but maybe not in the kernel ?
Sent from my SM-S920L using XDA-Developers mobile app
samsung galaxy grand prime sm-s920l of course...........phone was rooted with kingroot. then used supersu to remove kingroot and add superuser.......certain games wouldnt work on the rooted phone, so i used supersu to unroot. worked fine for 2 days but didnt reboot phone. phone battery died and caused shut down. now, phone freezes at blue trac phone screen right before the unlock screen. have pulled battery sincei cant shut it down, i have tried a factory reset, and nothing works...... this is what ive tried in odin3 v3.10 and even tried updating to odin v3.12.............no luck, please help me. i have to have my phone and cant afford another..........
ON PHONE SCREEN-----------------
odin mode
product name: sm-s920l
current binary: samsung official
system status: custom
reactivation lock (kk): on
qualcomm secureboot: enable (csb)
rp swrev: s1, t1, h1, r1, a1, p1
secure download: enable
secure check fail: boot
ON ODIN---------------------------------------------------------------------
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> boot.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tyrant46290 said:
samsung galaxy grand prime sm-s920l of course...........phone was rooted with kingroot. then used supersu to remove kingroot and add superuser.......certain games wouldnt work on the rooted phone, so i used supersu to unroot. worked fine for 2 days but didnt reboot phone. phone battery died and caused shut down. now, phone freezes at blue trac phone screen right before the unlock screen. have pulled battery sincei cant shut it down, i have tried a factory reset, and nothing works...... this is what ive tried in odin3 v3.10 and even tried updating to odin v3.12.............no luck, please help me. i have to have my phone and cant afford another..........
ON PHONE SCREEN-----------------
odin mode
product name: sm-s920l
current binary: samsung official
system status: custom
reactivation lock (kk): on
qualcomm secureboot: enable (csb)
rp swrev: s1, t1, h1, r1, a1, p1
secure download: enable
secure check fail: boot
ON ODIN---------------------------------------------------------------------
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> boot.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I am having the same problem due to almost the same reason, any time i try to flash with odin i get SECURE CHECK FAIL: BOOT, SECURE CHECK FAIL: RECOVERY or SECURE CHECK FAIL[FMM]: system depending on what i try to flash. I have tried multiple odin versions on two desktops (one windows 10 other 7) and a laptop
The lesson here being... Disable reactivation lock BEFORE messing around with your phone.
Tyrant46290 said:
samsung galaxy grand prime sm-s920l of course...........phone was rooted with kingroot. then used supersu to remove kingroot and add superuser.......certain games wouldnt work on the rooted phone, so i used supersu to unroot. worked fine for 2 days but didnt reboot phone. phone battery died and caused shut down. now, phone freezes at blue trac phone screen right before the unlock screen. have pulled battery sincei cant shut it down, i have tried a factory reset, and nothing works...... this is what ive tried in odin3 v3.10 and even tried updating to odin v3.12.............no luck, please help me. i have to have my phone and cant afford another..........
ON PHONE SCREEN-----------------
odin mode
product name: sm-s920l
current binary: samsung official
system status: custom
reactivation lock (kk): on
qualcomm secureboot: enable (csb)
rp swrev: s1, t1, h1, r1, a1, p1
secure download: enable
secure check fail: boot
ON ODIN---------------------------------------------------------------------
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> boot.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
try to flash it using odin try to use the stock boot put it on bootloader and use Stock system(Rooted with SuperSU, not KingRoot) put it on the PDA = enjoy
how can i unlock the region of my phone ?? model sm-s920l
Thansk to the OP, my phone is saved :good: I flashed the wrong model and screwed up my phone, but after flashing the stock system and boot, its back to normal. Thanks for the files!
everytime i put the system.zip in odin. odin stops responding and says please wait any fix?
---------- Post added at 12:58 AM ---------- Previous post was at 12:55 AM ----------
i hope this thread isnt to dead
---------- Post added at 01:02 AM ---------- Previous post was at 12:58 AM ----------
what order do i flash each file or dont it matter?
---------- Post added at 01:07 AM ---------- Previous post was at 01:02 AM ----------
nvm i got it. haha i was so worried my phone was bricked for a day all because i tried putting a custom rom on since 5.0.2 is so out dated lol
Velocity89 said:
everytime i put the system.zip in odin. odin stops responding and says please wait any fix?
---------- Post added at 12:58 AM ---------- Previous post was at 12:55 AM ----------
i hope this thread isnt to dead
---------- Post added at 01:02 AM ---------- Previous post was at 12:58 AM ----------
what order do i flash each file or dont it matter?
---------- Post added at 01:07 AM ---------- Previous post was at 01:02 AM ----------
nvm i got it. haha i was so worried my phone was bricked for a day all because i tried putting a custom rom on since 5.0.2 is so out dated lol
Click to expand...
Click to collapse
Odin does that to me as well just wait it is just checking the md5 and yes it takes a few minutes.
Sent from my SM-S920L using XDA-Developers mobile app
No TWRP after flashing with ODIN
Ok, did a factory reset. Allowed unknown sources. Using Odin from this thread: Clicked "AP" and added the patched twrp "recovery.tar.md5 (also tried removing .md5 from extension), plug in phone while in ODIN/Bootloader and it's added to ODIN, hit "Start" flash shows it succeeds and phone restarts. I go back into bootloader (Vol Down+Power+Home)and there is no recovery option... Am I missing something?
NVM. VOL *UP* + Power + Home to get into Recovery. I'm rusty. lol