Hello everyone,
After follow a tutorial I successfully rooted my Symphonyw125 (MT6589 ARMv7) but I lost my recovery option. That tutorial do that by using TWRP recovery and MobileUncle. I have done same and then my recovery option is totally gone. Phone is working fine. I tried to factory reset, it's reset all but nothing done with recovery option. It remain same.
In hard mode, by pressing power+volume up boot image comes on the screen then reboot again into normal mode. I also tried by using ADB, Replace recovery by SP flash, Factory Reset , all was worked without error. But Recovery/Bootloader Mode isn't fixed yet.
I don't know what to do next... .. any suggestion
Solve But Want to install Cstom ROM
My recovery problem is solved by following this http://www.technoinfos.com/how-to-solve-symphony-w125-recover-problem/ instructions. Only this recovery works with symphony w125 till now. But now I want to install custom ROM. I've tried several Jelly Bean ROM which is for Gionee gn708w. My phone "Symphony W125" is same as Gionee gn708w. After installation its alwayes stuck on bootimage.
I also tried http://forum.xda-developers.com/showthread.php?t=2247786 this. But on step 4 (Restore His Backup File With CWM) I've failed to restore. My CWM version is 5.05 does not read .dup file. He may be used CWM 6+ Version to made this backup. If it was .img file, can easily restore by CWM 5.05.
I also can't install ROM by following http://androidjugaad.com/showthread.php?tid=1313 method. I dont have windows, I am a linux user and SP Flashtool only works on windows.
So, If anyone have JB 4.2 which's boot.img is work on Symphony W125 or knows other method that work on this phone please share.
Thanks
custom roms!! please man
Come on!! I am also using symphony w125 .can u guys please make a custom ROM for it!!u guy are like android gods! Please man !a lot of guy use symphony w125 .and a custom ROM will be a great hit!!
freaklnx said:
My recovery problem is solved by following this http://www.technoinfos.com/how-to-solve-symphony-w125-recover-problem/ instructions. Only this recovery works with symphony w125 till now. But now I want to install custom ROM. I've tried several Jelly Bean ROM which is for Gionee gn708w. My phone "Symphony W125" is same as Gionee gn708w. After installation its alwayes stuck on bootimage.
I also tried http://forum.xda-developers.com/showthread.php?t=2247786 this. But on step 4 (Restore His Backup File With CWM) I've failed to restore. My CWM version is 5.05 does not read .dup file. He may be used CWM 6 Version to made this backup. If it was .img file, can easily restore by CWM 5.05.
I also can't install ROM by following http://androidjugaad.com/showthread.php?tid=1313 method. I dont have windows, I am a linux user and SP Flashtool only works on windows.
So, If anyone have JB 4.2 which's boot.img is work on Symphony W125 or knows other method that work on this phone please share.
Thanks
Click to expand...
Click to collapse
Here is link with variety of rom W125, do at your won risk
http://androidcustomizebd.wordpress.com/2013/12/30/custom-rom-for-symphony-w125/
as far as i know, before applying custom rom on w125 u have to debrand it (some thing like BL), by applying recovery img of x800(not sure)..
Related
Dear Friends,
I did a mistake in flashing the rom in xolo q800.
first i have rooted with cwm recovery and that was went fine for me.
second time with out removing the cwm recovery i used TWRP recovery to flash my rom.
Now what happend i can't able to open cwm recovery console in q800.
pls help me how to recovery this..
Now i want to reflash with TWRP recovery.img. please provide me step by step to solve my problem.
mtheja said:
Dear Friends,
I did a mistake in flashing the rom in xolo q800.
first i have rooted with cwm recovery and that was went fine for me.
second time with out removing the cwm recovery i used TWRP recovery to flash my rom.
Now what happend i can't able to open cwm recovery console in q800.
pls help me how to recovery this..
Now i want to reflash with TWRP recovery.img. please provide me step by step to solve my problem.
Click to expand...
Click to collapse
Hello, if you have problem with start recovery mod, i think, you can only use Odin and your phone in Download mode ..
Try flashing the official stock rom or the firmware
Hi I Have a Lenovo A390 and I'm Having
Trouble going into the recovery
mode,Everytime I Boot Into Recovery
Mode,A dead android icon with a Red
Triangle Appears and nothing happens
(The Icon is like this> cdn.howtogeek.com/wp-content/
uploads/2012/12/android-recovery-
mode.jpg ) I waited 2-3 minutes and still
Nothing happens,What should i do?Should
i install a custom recovery? Or what. I'm
on stock and my phone is rooted,I rooted
it using framaroot. Please Help Me.
Thanks.
U need to install TWRP, coz a390 doesn't have default recovery. Ask Google for TWRP, install using flashtool.
Sent from my Lenovo A390_ROW
JuliusAlfred77 said:
Hi I Have a Lenovo A390 and I'm Having
Trouble going into the recovery
mode,Everytime I Boot Into Recovery
Mode,A dead android icon with a Red
Triangle Appears and nothing happens
(The Icon is like this> cdn.howtogeek.com/wp-content/
uploads/2012/12/android-recovery-
mode.jpg ) I waited 2-3 minutes and still
Nothing happens,What should i do?Should
i install a custom recovery? Or what. I'm
on stock and my phone is rooted,I rooted
it using framaroot. Please Help Me.
Thanks.
Click to expand...
Click to collapse
The stock recovery what you have got.
If you press the home button, you can see the menu.
If you want to install a custom recovery, you can use my ported CWM, which works. This recovery is based on bgcngm ZTE V970 recovery, using his mtktools.
CWM 6.0.1.2 for Lenovo A390
md5sum : 8ef0d0a92682a93fe147436d0ce20549
You can install it - considering that your phone is rooted - with the help of MobileUncleTools; Possible ways from A820 thread.
Ok.Thanks sir :thumbup:
Sent from my Lenovo A390_ROW using xda app-developers app
Red triangle dead android still appears even with your cwm
Hello Cappa. I too have rooted my Lenovo A390 using framaroot. and installed ROM Manager. Initially, ROM manager complained there is no clockworkmod recovery for my device model. I then flashed your clockworkmod recovery using spflashtool. Successful and ROM Manager finally detcted my clockworkmod too as version 5.x.x.x.. But, then when i tried to backup my current ROM, phone reboots and tries to enter recovery mode. But, then the dead android killed by a red triangle still appears. Help me!!!! Somewhere i read that it is the stock recovery icon and the phone should still be able to enter recovery mode using volume up, down buttons. Is it true. Somewhere, I read that TWRP must be used instead, because LENOVO A390 does not have cutom recovery. What should I do next? Suggest. If TWRP should be installed, I would wish to remove CWM first. Is it possible to remove CWM, after it has been flashed?
Sorry for lots of questions.
Will be grateful for your help.
Regards
cappa72 said:
The stock recovery what you have got.
If you press the home button, you can see the menu.
If you want to install a custom recovery, you can use my ported CWM, which works. This recovery is based on bgcngm ZTE V970 recovery, using his mtktools.
CWM 6.0.1.2 for Lenovo A390
md5sum : 8ef0d0a92682a93fe147436d0ce20549
You can install it - considering that your phone is rooted - with the help of MobileUncleTools; Possible ways from A820 thread.
Click to expand...
Click to collapse
ZaiduPaidu said:
Hello Cappa. I too have rooted my Lenovo A390 using framaroot. and installed ROM Manager. Initially, ROM manager complained there is no clockworkmod recovery for my device model. I then flashed your clockworkmod recovery using spflashtool. Successful and ROM Manager finally detcted my clockworkmod too as version 5.x.x.x.. But, then when i tried to backup my current ROM, phone reboots and tries to enter recovery mode. But, then the dead android killed by a red triangle still appears. Help me!!!! Somewhere i read that it is the stock recovery icon and the phone should still be able to enter recovery mode using volume up, down buttons. Is it true. Somewhere, I read that TWRP must be used instead, because LENOVO A390 does not have cutom recovery. What should I do next? Suggest. If TWRP should be installed, I would wish to remove CWM first. Is it possible to remove CWM, after it has been flashed?
Sorry for lots of questions.
Will be grateful for your help.
Regards
Click to expand...
Click to collapse
There can be many reasons for not having the CWM.
You mentioned that you could flash the CWM.
I have not used ROM manager for MTK platform - I don't know if it is compatible with it. I used Mobileuncletools instead: you can change recovery with this program (can be downloaded from PlayStore - free app)
Right after you change the recovery from stock to CWM, then you have to enter into it.
And then make a backup directly from CWM.
This is my suggestion.
Also, I would recommend that run the chinese application remover, right after entering the CWM.
The reason why I suggest it that the stock rom can contain patches, which rewrite all the modified recovery to stock.
can i flash twrp recovery with same scatter file to remove cwm
One more question. I found on several forums that TWRP recovery works for Lenovo A390 and can be flashed using SPFlashtool. Will flashing the TWRP recovery overwrite the CWM recovery, if I use the same scatter file. I guess the scatter file provides the start and end address for flashing into ROM.
chokybali said:
U need to install TWRP, coz a390 doesn't have default recovery. Ask Google for TWRP, install using flashtool.
Sent from my Lenovo A390_ROW
Click to expand...
Click to collapse
Hello,
I visited TWRP site as well as CWM recovery site. Niether of them supports Lenovo_A390_ROW, not listed. I guess coz the brand is new to the market. ROM Manager too complains that the phone model is not supported and I should wait until an official recovery from CWM is available. However, I googled and got one CWM recovery by cappa for Lenovo_A390 but got the dead android triangle. Then, I googled and got a TWRP recovery for Lenovo_A390_Row and flashed this one too (some friends suggested flashing with same scatter file overwrite the previous CWM). But, I still get the dead andorid with triangle icon. What is wrong? I guess the recovery images that I am flashing are not correct. Do you have the correct TWRP recovery image for Lenovo_A390_ROW?
How can I use SPflashtool and make the downloaded cwm 6.012 a scatter file?
ZaiduPaidu said:
Hello Cappa. I too have rooted my Lenovo A390 using framaroot. and installed ROM Manager. Initially, ROM manager complained there is no clockworkmod recovery for my device model. I then flashed your clockworkmod recovery using spflashtool. Successful and ROM Manager finally detcted my clockworkmod too as version 5.x.x.x.. But, then when i tried to backup my current ROM, phone reboots and tries to enter recovery mode. But, then the dead android killed by a red triangle still appears. Help me!!!! Somewhere i read that it is the stock recovery icon and the phone should still be able to enter recovery mode using volume up, down buttons. Is it true. Somewhere, I read that TWRP must be used instead, because LENOVO A390 does not have cutom recovery. What should I do next? Suggest. If TWRP should be installed, I would wish to remove CWM first. Is it possible to remove CWM, after it has been flashed?
Sorry for lots of questions.
Will be grateful for your help.
Regards
Click to expand...
Click to collapse
I downloaded SPflashtool and the CWM recovery image. It says I need a scatter file and it couldn't continue. How do I make that CWM recovery image a scatter file to flash and how do you flash that into the phone using SPflasher? Do I need ROM Manager for that?
hi guys m a utter noob about porting n this is the first time i will try doing it i have rooted phones flashed custom ROMs etc etc
now i got a new Xolo Q700s i wanna port Cherry mobile Fuze ROM on it can i do it ? the oonly difference is the front cam and the battery both have same MT6582M 1GB RAM 8 MP camera screen res and another thing is i cant get the stock rom for Q700S anyway online can someone point me a way where i can get the system boot recovery etc .img files ???
BUMP!!!!!!!
Tarun93 said:
hi guys m a utter noob about porting n this is the first time i will try doing it i have rooted phones flashed custom ROMs etc etc
now i got a new Xolo Q700s i wanna port Cherry mobile Fuze ROM on it can i do it ? the oonly difference is the front cam and the battery both have same MT6582M 1GB RAM 8 MP camera screen res and another thing is i cant get the stock rom for Q700S anyway online can someone point me a way where i can get the system boot recovery etc .img files ???
Click to expand...
Click to collapse
Without the stock rom, it is so risky to test custom roms, almost impossible.
But if you can flash TWRP or CWM, you can backup your stock rom to restore everytime you fail.
I suggest you to find the custom recovery first.
Use this Mobile Uncle Tools (MTK tools) to flash custom recovery, the most easy way to flash recovery for MTK devices. If you want to know how to use it, go to www.kokoandroid.weebly.com and follow the step 2,3 and 5.
Good Luck in porting rom. :fingers-crossed:
Sithu Htun said:
Without the stock rom, it is so risky to test custom roms, almost impossible.
But if you can flash TWRP or CWM, you can backup your stock rom to restore everytime you fail.
I suggest you to find the custom recovery first.
Use this Mobile Uncle Tools (MTK tools) to flash custom recovery, the most easy way to flash recovery for MTK devices. If you want to know how to use it, go to www.kokoandroid.weebly.com and follow the step 2,3 and 5.
Good Luck in porting rom. :fingers-crossed:
Click to expand...
Click to collapse
could not find cwm for my phone so did a self mod and got CWM working in the q700s made a backup of my Stock rom which can be flashed with sp flasher n not i m off for porting thanx for the help anyways
Tarun93 said:
could not find cwm for my phone so did a self mod and got CWM working in the q700s made a backup of my Stock rom which can be flashed with sp flasher n not i m off for porting thanx for the help anyways
Click to expand...
Click to collapse
Please Help!
After trying to do a partition on my Cherry Mobile Thunder ( a.k.a. MicromaxA91) (2GB of 4GB internal), then I tried to restore factory settings to complete the partition, when It restarted It got stuck in the bootlogo, I got it bricked, Tried to flash my stock rom with TWRP, it failed, Cleared Cache - Failed, Cleared Dalvik Cache Wipe - Failed, tried to Reboot & Restore Factory Settings - still Fails and Prompts " No OS Found, Continue Reboot?" then asks for installing SU, FAILED, Tried to Flash it with ADB - but just pompts "waiting for device" I'm running out of options PLEASE HELP!
capc1989 said:
Please Help!
After trying to do a partition on my Cherry Mobile Thunder ( a.k.a. MicromaxA91) (2GB of 4GB internal), then I tried to restore factory settings to complete the partition, when It restarted It got stuck in the bootlogo, I got it bricked, Tried to flash my stock rom with TWRP, it failed, Cleared Cache - Failed, Cleared Dalvik Cache Wipe - Failed, tried to Reboot & Restore Factory Settings - still Fails and Prompts " No OS Found, Continue Reboot?" then asks for installing SU, FAILED, Tried to Flash it with ADB - but just pompts "waiting for device" I'm running out of options PLEASE HELP!
Click to expand...
Click to collapse
download sp flash tool from HERE
download the stock rom for your phone which can be flashed via sp flash tools
for more info here a link that might help you
http://forum.xda-developers.com/showthread.php?t=1982587
hope that helped pal
\I didn't work it, what should I do??
hellow guys !
recently i flashed some roms on my GT-S6310....no problem whit them....everthing worked perfectly (just to compare them)
so.... i flashed a stock rom on my phone to apply a theme....everything went good....how i expected my custom recovery image was replaced whit the stock one ....... so far so good....but when i try to flash via Odin the same CWM it show me "pass" but when i boot into recovery it appear the stock one
in that way i tried a milion of methods to flash the custom one but they wasn't work
even the "root" didn't worked :crying:
now i'm stack into the stock rom , whitout any way to escape
please guys help me to understand why it happened , and how to resolve it
stefan254235435235411354 said:
hellow guys !
recently i flashed some roms on my GT-S6310....no problem whit them....everthing worked perfectly (just to compare them)
so.... i flashed a stock rom on my phone to apply a theme....everything went good....how i expected my custom recovery image was replaced whit the stock one ....... so far so good....but when i try to flash via Odin the same CWM it show me "pass" but when i boot into recovery it appear the stock one
in that way i tried a milion of methods to flash the custom one but they wasn't work
even the "root" didn't worked :crying:
now i'm stack into the stock rom , whitout any way to escape
please guys help me to understand why it happened , and how to resolve it
Click to expand...
Click to collapse
Don't let it auto reboot after the recovery flashes. Either uncheck auto reboot or just hit the combo for recovery when the phone reboots. Many newer Samsung phones have a script that reinstalls the original recovery if it realizes that you have changed it. You have to install another rom or root it and remove the script and reflash the recovery and it'll stick if you just want stock rooted.
es0tericcha0s said:
Don't let it auto reboot after the recovery flashes. Either uncheck auto reboot or just hit the combo for recovery when the phone reboots. Many newer Samsung phones have a script that reinstalls the original recovery if it realizes that you have changed it. You have to install another rom or root it and remove the script and reflash the recovery and it'll stick if you just want stock rooted.
Click to expand...
Click to collapse
didn't worked...... after i flash the recovery (i'm in download mode) i boot directly into recovery.... the same problem
try to instal the recovery via rom manager.....seems to work.....but when i want to boot from rom manager into recovery it show me an error ("an error occurred while attempting to run privileged commands !" )
what should i do now ?
http://galaxyyoungs6312.blogspot.com/2014/01/clockworkmod-recovery-for-galaxy-young.html
6310 + 6312 use the same recovery.
yeah....but i tried that rooting method and it didn't work....
maybe i can flash a new rom from ADB but i can't pass the signature verification
any ideas ?
Well I can tell from your pictures that you didn't follow the suggestion of trying SuperSU, but that might not help anyway. That Framaroot version is an older one. Get the updated version from here: http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276 and use SuperSU instead of Superuser. Sometimes you have to run it a couple times before it'll go through. Reboot in between tries. Here are better instructions for the rest of the process:
http://forum.xda-developers.com/showthread.php?t=2460029
man ...didn;t work... ... tried at least 5 times .....
or....i can flash a rom from ADB but i can't pass the signature verification....
a have an ideea ....maybe i can flash via odin a rom whit a custom recovery ...from there i can flash an old backup of mine .....it's good to proceed right that ?
OK, the thing is... I've search everywhere I could find stuff around this subject and none of the things I used worked.
I have a rooted ZTE Blade L2 with stock 4.4.2 with a stock recovery system (a very basic one).
I tried UncleMTKtools (or something), Flashify and MTK droid Tools to install CWM or any system recovery for that but they all fail at some point.
I am very confused! Is there any Recovery avaiable to this phone with stock KitKat??
Also tried to downgrade it to jelly bean due some reports of users who installed CWM with the most easiest way they could get, but it fails in the instalation and I have to flash the Portuguese Stock Rom all from the start.
Anyone has any ideas?? Please help
zte
Mobile unlce toolswill not work i have tryed on many phones it does not find recovery best soulution is to build a custom cwm useing mtk droid toold then flash via scatter or just build inside the actual program (mtk droid tools)
L2
sorry in advance for my english... i'm using carliv recovery and flashed miui rom which is for me the best rom for our phone so far...but my mistake is I forgot to backup my nvram so I lost my 3G connection...does anyone know how to recover 3G?...Thanks...
cwm for the blade l2
Email me at [email protected]
I have made a cwm recovery for our odd phone lol
Anyone else free to email me for a copy of the recovery
I also have the stock recovery if u want aswell
REMEMBER TO USE FLASHIFY AND TO ROOT UR FONE USE FRAMAROOT