hi guys,
im facing a new problem in my phone after couple of works i have done today.
i was runnig this stock rom 9300XXELKC_I9300OXXELK4_I9300XXELKC_HOME on my s3 with android JB 4.1.2.
today i tried to install the leakd JB 4.2.2 fro sammobile and successfully upgraded the rom...
after sometime i realized the phone freezes and no matter how much u wait,nothin changes n onli way is to reboot the phone manualli.
i have formated n factory reset the phone also but still the same problem was thr(infact it got worst)
i have downgraded to the previous stock rom i had n did wipe everythin but now also the phone freezes sometime...
whats the reason behind it?plz help,its irritatin.
thank u
sinahidden said:
hi guys,
im facing a new problem in my phone after couple of works i have done today.
i was runnig this stock rom 9300XXELKC_I9300OXXELK4_I9300XXELKC_HOME on my s3 with android JB 4.1.2.
today i tried to install the leakd JB 4.2.2 fro sammobile and successfully upgraded the rom...
after sometime i realized the phone freezes and no matter how much u wait,nothin changes n onli way is to reboot the phone manualli.
i have formated n factory reset the phone also but still the same problem was thr(infact it got worst)
i have downgraded to the previous stock rom i had n did wipe everythin but now also the phone freezes sometime...
whats the reason behind it?plz help,its irritatin.
thank u
Click to expand...
Click to collapse
did you wipe everything from stock recovery immediately after flashing leaked 4.2.2 ?
sriram231092 said:
did you wipe everything from stock recovery immediately after flashing leaked 4.2.2 ?
Click to expand...
Click to collapse
no not immediately,but after i got few times freezing,i did that.but after that also my phone was hanging,i can say even more...:|
sinahidden said:
no not immediately,but after i got few times freezing,i did that.but after that also my phone was hanging,i can say even more...:|
Click to expand...
Click to collapse
if you do not wipe immediately, you get some system ui has stopped like something. so it is always good to wipe as soon as you see samsung logo after the rom is flashed. pull out the battery and quickly boot into recovery and wipe everyhting and you should be good to go
sriram231092 said:
if you do not wipe immediately, you get some system ui has stopped like something. so it is always good to wipe as soon as you see samsung logo after the rom is flashed. pull out the battery and quickly boot into recovery and wipe everyhting and you should be good to go
Click to expand...
Click to collapse
i have done that,infact without doing that my phone wuldnt have boot up after the downgrade...
but that problem still resist...can it be due to some corrupted file which might be cuzd by 4.2.2 ?maybe it spoiled some system file.
sinahidden said:
i have done that,infact without doing that my phone wuldnt have boot up after the downgrade...
but that problem still resist...can it be due to some corrupted file which might be cuzd by 4.2.2 ?maybe it spoiled some system file.
Click to expand...
Click to collapse
may be yeah(not sure). did the same happen with any custom roms? or only stock ones?
sriram231092 said:
may be yeah(not sure). did the same happen with any custom roms? or only stock ones?
Click to expand...
Click to collapse
i've been on stock roms since i got the phone,so cant say anythin cuz i didnt flash any custom rom.
Related
hi.
i flashed stock rom S5830XWKS2 through Odin. the phone started rebooting randomly.
then i flashed custom rom TheMyth KS3 but the problem kept getting worse. when i'm using the phone, it reboots every few seconds.
i flashed stock rom S5830XWKS3. but the Baseband version in the phone didnt change (S5830XWKS2). and the problem is still persistent.
the phones does not do full reboot. it freezes, the screen goes black, then goes strait to the boot animation.
also, if it reboots while transferring files through mass usb storage, the transfer doesnt stop, to continues normally.
1. any idea why is this happening?
2. why didnt the baseband version change when i flashed KS3?
3. do you recommend another stock rom to flash.
p.s: KS3 seems fast. i got 1040 score in quadrant on stock rom.
i would appreciate any help. thanks
dali47 said:
hi.
i flashed stock rom S5830XWKS2 through Odin. the phone started rebooting randomly.
then i flashed custom rom TheMyth KS3 but the problem kept getting worse. when i'm using the phone, it reboots every few seconds.
i flashed stock rom S5830XWKS3. but the Baseband version in the phone didnt change (S5830XWKS2). and the problem is still persistent.
the phones does not do full reboot. it freezes, the screen goes black, then goes strait to the boot animation.
also, if it reboots while transferring files through mass usb storage, the transfer doesnt stop, to continues normally.
1. any idea why is this happening?
2. why didnt the baseband version change when i flashed KS3?
3. do you recommend another stock rom to flash.
p.s: KS3 seems fast. i got 1040 score in quadrant on stock rom.
i would appreciate any help. thanks
Click to expand...
Click to collapse
Hey !
The Baseband Version is KS2 while Build is KS9 (in my stock rom)
If you end in Bootloops, press Power + Home till you get into recovery, then Clear data/Factory Reset and clear Cache, then reboot.
Come back and tell me if it worked for you.
Greetings
thank you for your reply.
it's actually not a bootloop. the phone boots normally and works fine for some times (few seconds/minutes) then it freezes for few seconds, then the screen turns black for a second, then shows the boot animation (doesn't show the boot screen with the samsung logo). it works fine for some time, then again.
it seems that the problem is related to the wifi. it only happens when wifi is on.
On Samfirmware.com they say that you should make a Factory Reset after flashing, maybe that works for you ? I flashed the KS9 Stock today and had some problems till I did this in Recovery. Else I would have no Idea, maybe reflash or get another Version ?
You could also try to install any custom Rom, like Jusada´s ICS for example, just to test if there are problems with CM also ..
Umm, maybe a question to those who only touch the Earth to answer our Newb questions...is it possible that the Ace restarts when it get´s attacked from the outside ? I faced that after flashing a Rom that I modified and didn´t have the right Permissions the Phone restarted/bootlooped when I tried to install any App (\data\app wasn´t set correct)
Greetings
thank you. i guess i'll try to flash again. or maybe try a different stock.
dali47 said:
thank you. i guess i'll try to flash again. or maybe try a different stock.
Click to expand...
Click to collapse
If you had the Android SDK Tools , you could show me a logcat of what's going on
EmoBoiix3 said:
If you had the Android SDK Tools , you could show me a logcat of what's going on
Click to expand...
Click to collapse
hi. i do have the sdk. here are a few log files:
http://pastebin.com/Amt00nuY
http://pastebin.com/SHeasfvq
http://pastebin.com/sirV2FEe
this is the first time i use logcat, so if there is a command or option i should use to make the log file more useful, just let me know.
thank you for your time
dali47 said:
hi. i do have the sdk. here are a few log files:
http://pastebin.com/Amt00nuY
http://pastebin.com/SHeasfvq
http://pastebin.com/sirV2FEe
this is the first time i use logcat, so if there is a command or option i should use to make the log file more useful, just let me know.
thank you for your time
Click to expand...
Click to collapse
The original TheMyth creator said that KS3 was badly unstable .
Use KS2 instead
Sent from my GT-S5830 using XDA App
EmoBoiix3 said:
The original TheMyth creator said that KS3 was badly unstable .
Use KS2 instead
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
He should try to upgrade to KS3 v1.1. That's final update for TheMyth KS3 with:
- Meizu Myth theme
- BLN Control activated
- changed some small things
>> I think this update can help him to solve frequent random reboot in TheMyth KS3
http://mobile.livemodding.com/forum/398-samsung-galaxy-ace/
Click to expand...
Click to collapse
my first attempt was with KS2. that's when the problem started, even before i install TheMyth. The 1.1 update didnt help either.
I guess my phone is not getting along with the KS2 baseband. i will just switch to GingerReal, hopefully it will be stable.
thank you everyone
Hey guys,
I have tried to upgrade my Micromax A116 to the official update of 4.2 jelly bean. But as soon as i reboot my phone after flashing it using the basic SP tools method, my screen continuously goes on and off. Has anybody else come across this problem? If yes, then can you please share with me the solution? Now i am back to the stock rom of 4.1.2..Any kind of help is appreciated..Thank you..:cyclops: I really want to update it to 4.2.1..
PS: Am i the only one around here who thinks that the stock rom is better than any other custom roms for micromax a116?:laugh:
There are others who reported the same problem. But as of now there doesn't seem to be any solutions as its happening to only some of CHD devices
Thanks
tmohans said:
There are others who reported the same problem. But as of now there doesn't seem to be any solutions as its happening to only some of CHD devices
Click to expand...
Click to collapse
Just wanted to see if I was the only one. Thanks anyway
Possible Solution
1. Don't keep your mobile on auto-brightness.
2. Go to your WiFi and click on it and then hit the menu button on left and then go to advanced option and turn off WiFi optimization.
This will solve your flickering issue.
======================================
or enable Hardware overlay from developer options.
P.S: I am not experiencing any flickering so these steps haven't been tried by me.. try on your own and reply if it helped.:good::fingers-crossed:
I am facing the same problem. I tried hardware overlay and auto brightness but no success. I never tried WiFi though. I had flashed my device more than 10 times now.
Sent from my Micromax A116 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:30 PM ----------
Same problem with my handset as well. So far no resolution.
Sent from my Micromax 6 using xda app-developers app
neatearth said:
I am facing the same problem. I tried hardware overlay and auto brightness but no success. I never tried WiFi though. I had flashed my device more than 10 times now.
Sent from my Micromax A116 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:30 PM ----------
Same problem with my handset as well. So far no resolution.
Sent from my Micromax 6 using xda app-developers app
Click to expand...
Click to collapse
Worth waiting for service center for 4.2 update for your phone. Stop experimenting further and stay on 4.1.2 backup.
WARNING: If you try SP TOOL to flash 4.2 on your phone for some more time, you may LOSE IMEI codes and phone will be literally useless and you need to give it to service center, with a RISK of service rejection coz you rooted it. If you dont know how to unroot and restore stock recovery, you will be in trouble. So keep using 4.1.2 and be safe. Later, dont tell people, no one warned you. Telling you from my own experience.
Should I flash using recovery mode ?
Sent from my Micromax A116 using xda app-developers app
adizrox said:
1. Don't keep your mobile on auto-brightness.
2. Go to your WiFi and click on it and then hit the menu button on left and then go to advanced option and turn off WiFi optimization.
This will solve your flickering issue.
======================================
or enable Hardware overlay from developer options.
P.S: I am not experiencing any flickering so these steps haven't been tried by me.. try on your own and reply if it helped.:good::fingers-crossed:
Click to expand...
Click to collapse
Tried it..but it didn't work.. But thanks anyway
Lyyclec extraneus
cmahendra said:
Worth waiting for service center for 4.2 update for your phone. Stop experimenting further and stay on 4.1.2 backup.
WARNING: If you try SP TOOL to flash 4.2 on your phone for some more time, you may LOSE IMEI codes and phone will be literally useless and you need to give it to service center, with a RISK of service rejection coz you rooted it. If you dont know how to unroot and restore stock recovery, you will be in trouble. So keep using 4.1.2 and be safe. Later, dont tell people, no one warned you. Telling you from my own experience.
Click to expand...
Click to collapse
@cmahendra I have read one of your posts where you have mentioned that you had the same problem(Screen Blinking). Did you manage to get over it? Which method did you try to flash. Please share your experience. It will be quite helpful. At present I am planning to try TWRP recovery to flash. I do not know if it will work.... Will keep update.
Screen Blinking
Hello,
I followed the procedure several times.
this saturday I spent the whole day trying to flash 4.2.1 sotck rom on my phone. But, got the same screen blinking issue.
I've TWRP installed and tried the tweaked Flash-able rom as well as the SP tools flash-able one. but the same issue.
I followed below three routes:
1. Flashed stock rom .16 to make the phone factory state.
2. Then first tried flashing .20 update. Flashed successfully, but the screen started blinking as soon as the phone rebooted, i.e. right when the boot animation starts. I disabled auto brightness as well as disabled HW overlay. but the issue stayed.
3. I again flashed .16 and then 4.2.1 updated rom, first as 'Download' option in SP flash tools, but the same issue occured. I then tried, 'Firmware upgrade' still the same issue.
4. flashed .16 again; flashed TWRP, tried the tweaked zip flash-able rom, but same issue.
5. Tried custom ROM JellyDemon v2.2, the phone was not stuck at bootscreen.
6. in so much of flashing lost IMEI. so, flashed stock .16 again, installed TWRP, extended phone storage to 2.5 GB flashed Jellyxperia 4.1.2 based custom rom, swapped internal storage and then used Mobileuncle MTK toolkit to restore IMEI (I had used the same earlier to backup the IMEI to external SD card.
So, basically I'm back to square one after spending almost 8 hours to get 4.2 update :crying:. If only the blinking screen issue could be fixed :crying:
Sauravh said:
Hello,
I followed the procedure several times.
this saturday I spent the whole day trying to flash 4.2.1 sotck rom on my phone. But, got the same screen blinking issue.
I've TWRP installed and tried the tweaked Flash-able rom as well as the SP tools flash-able one. but the same issue.
I followed below three routes:
1. Flashed stock rom .16 to make the phone factory state.
2. Then first tried flashing .20 update. Flashed successfully, but the screen started blinking as soon as the phone rebooted, i.e. right when the boot animation starts. I disabled auto brightness as well as disabled HW overlay. but the issue stayed.
3. I again flashed .16 and then 4.2.1 updated rom, first as 'Download' option in SP flash tools, but the same issue occured. I then tried, 'Firmware upgrade' still the same issue.
4. flashed .16 again; flashed TWRP, tried the tweaked zip flash-able rom, but same issue.
5. Tried custom ROM JellyDemon v2.2, the phone was not stuck at bootscreen.
6. in so much of flashing lost IMEI. so, flashed stock .16 again, installed TWRP, extended phone storage to 2.5 GB flashed Jellyxperia 4.1.2 based custom rom, swapped internal storage and then used Mobileuncle MTK toolkit to restore IMEI (I had used the same earlier to backup the IMEI to external SD card.
So, basically I'm back to square one after spending almost 8 hours to get 4.2 update :crying:. If only the blinking screen issue could be fixed :crying:
Click to expand...
Click to collapse
I feel you bro.. I also have tried to install the 4.2 update like 3-4 times.. Everytime i get the same issue.. But I haven't occured an issue with any other custom roms.. But I have the same issue with tweaked roms.. GOD HELP US:crying:
hardiktrivedi0612 said:
I feel you bro.. I also have tried to install the 4.2 update like 3-4 times.. Everytime i get the same issue.. But I haven't occured an issue with any other custom roms.. But I have the same issue with tweaked roms.. GOD HELP US:crying:
Click to expand...
Click to collapse
Now, I'm thinking as My phone is less than 30 days old, Should I give it to SVC to upgrade, I'll first flash the stock rom and then give it to svc, So, If they face the blinking issue, may be I could get replacement with updated stock ROM.. But need to find the svc in Noida or nearby
Sauravh said:
Now, I'm thinking as My phone is less than 30 days old, Should I give it to SVC to upgrade, I'll first flash the stock rom and then give it to svc, So, If they face the blinking issue, may be I could get replacement with updated stock ROM.. But need to find the svc in Noida or nearby
Click to expand...
Click to collapse
:laugh::laugh: But make sure that you properly unroot it first and flash .16 stock rom..
hardiktrivedi0612 said:
Hey guys,
I have tried to upgrade my Micromax A116 to the official update of 4.2 jelly bean. But as soon as i reboot my phone after flashing it using the basic SP tools method, my screen continuously goes on and off. Has anybody else come across this problem? If yes, then can you please share with me the solution? Now i am back to the stock rom of 4.1.2..Any kind of help is appreciated..Thank you..:cyclops: I really want to update it to 4.2.1..
PS: Am i the only one around here who thinks that the stock rom is better than any other custom roms for micromax a116?:laugh:
Click to expand...
Click to collapse
tmohans said:
There are others who reported the same problem. But as of now there doesn't seem to be any solutions as its happening to only some of CHD devices
Click to expand...
Click to collapse
neatearth said:
I am facing the same problem. I tried hardware overlay and auto brightness but no success. I never tried WiFi though. I had flashed my device more than 10 times now.
Sent from my Micromax A116 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:30 PM ----------
Same problem with my handset as well. So far no resolution.
Sent from my Micromax 6 using xda app-developers app
Click to expand...
Click to collapse
neatearth said:
@cmahendra I have read one of your posts where you have mentioned that you had the same problem(Screen Blinking). Did you manage to get over it? Which method did you try to flash. Please share your experience. It will be quite helpful. At present I am planning to try TWRP recovery to flash. I do not know if it will work.... Will keep update.
Click to expand...
Click to collapse
Sauravh said:
Hello,
I followed the procedure several times.
this saturday I spent the whole day trying to flash 4.2.1 sotck rom on my phone. But, got the same screen blinking issue.
I've TWRP installed and tried the tweaked Flash-able rom as well as the SP tools flash-able one. but the same issue.
I followed below three routes:
1. Flashed stock rom .16 to make the phone factory state.
2. Then first tried flashing .20 update. Flashed successfully, but the screen started blinking as soon as the phone rebooted, i.e. right when the boot animation starts. I disabled auto brightness as well as disabled HW overlay. but the issue stayed.
3. I again flashed .16 and then 4.2.1 updated rom, first as 'Download' option in SP flash tools, but the same issue occured. I then tried, 'Firmware upgrade' still the same issue.
4. flashed .16 again; flashed TWRP, tried the tweaked zip flash-able rom, but same issue.
5. Tried custom ROM JellyDemon v2.2, the phone was not stuck at bootscreen.
6. in so much of flashing lost IMEI. so, flashed stock .16 again, installed TWRP, extended phone storage to 2.5 GB flashed Jellyxperia 4.1.2 based custom rom, swapped internal storage and then used Mobileuncle MTK toolkit to restore IMEI (I had used the same earlier to backup the IMEI to external SD card.
So, basically I'm back to square one after spending almost 8 hours to get 4.2 update :crying:. If only the blinking screen issue could be fixed :crying:
Click to expand...
Click to collapse
try to flash this file..
this file fixed the issue for some people..
build prop values are stock 4.2
http://d-h.st/L22
hottesthunkkush said:
try to flash this file..
this file fixed the issue for some people..
build prop values are stock 4.2
http://d-h.st/L22
Click to expand...
Click to collapse
Will try it for sure.... Love your work BTW!! keep up the good work:good:
hardiktrivedi0612 said:
Will try it for sure.... Love your work BTW!! keep up the good work:good:
Click to expand...
Click to collapse
Did you try the flickerfix.zip ? Please let me know
---------- Post added at 05:38 AM ---------- Previous post was at 05:30 AM ----------
hottesthunkkush said:
try to flash this file..
this file fixed the issue for some people..
build prop values are stock 4.2
http://d-h.st/L22
Click to expand...
Click to collapse
I am using TWRP and right now on 4.1.2 . Can not upgrade to 4.2 due to blinking issue. Should I flash using flickerfix.zip before upgradation to 4.1 or should do after upgrading to 4.2 ? I will use SP lfash tool to upgrade. I will really appreciate if you can provide a step by step guidance.
thanking you
neatearth said:
Did you try the flickerfix.zip ? Please let me know
Sorry haven't got the time yet.. But will surely let you know when i do.
Click to expand...
Click to collapse
neatearth said:
I am using TWRP and right now on 4.1.2 . Can not upgrade to 4.2 due to blinking issue. Should I flash using flickerfix.zip before upgradation to 4.1 or should do after upgrading to 4.2 ? I will use SP lfash tool to upgrade. I will really appreciate if you can provide a step by step guidance.
thanking you
Click to expand...
Click to collapse
Flash 4.2 First then flickerfix.zip
same situation
Sauravh said:
Hello,
I followed the procedure several times.
this saturday I spent the whole day trying to flash 4.2.1 sotck rom on my phone. But, got the same screen blinking issue.
I've TWRP installed and tried the tweaked Flash-able rom as well as the SP tools flash-able one. but the same issue.
I followed below three routes:
1. Flashed stock rom .16 to make the phone factory state.
2. Then first tried flashing .20 update. Flashed successfully, but the screen started blinking as soon as the phone rebooted, i.e. right when the boot animation starts. I disabled auto brightness as well as disabled HW overlay. but the issue stayed.
3. I again flashed .16 and then 4.2.1 updated rom, first as 'Download' option in SP flash tools, but the same issue occured. I then tried, 'Firmware upgrade' still the same issue.
4. flashed .16 again; flashed TWRP, tried the tweaked zip flash-able rom, but same issue.
5. Tried custom ROM JellyDemon v2.2, the phone was not stuck at bootscreen.
6. in so much of flashing lost IMEI. so, flashed stock .16 again, installed TWRP, extended phone storage to 2.5 GB flashed Jellyxperia 4.1.2 based custom rom, swapped internal storage and then used Mobileuncle MTK toolkit to restore IMEI (I had used the same earlier to backup the IMEI to external SD card.
So, basically I'm back to square one after spending almost 8 hours to get 4.2 update :crying:. If only the blinking screen issue could be fixed :crying:
Click to expand...
Click to collapse
i tried almost everything u tried, now back to stock .16 , all other roms had the screen flickering issue, never tried jellyxperia though, are u using jellyxperia now?? have u found any solution?? is jellyxperia facing the same problem?? thanks
sweetrascal said:
i tried almost everything u tried, now back to stock .16 , all other roms had the screen flickering issue, never tried jellyxperia though, are u using jellyxperia now?? have u found any solution?? is jellyxperia facing the same problem?? thanks
Click to expand...
Click to collapse
I'm using Jellyxperia. it does not have blinking issue as it is based on 4.1.2.
It's faster than stock and I like the Walkman music player. However, I noticed that battery drains faster comparing to stock 4.1.2.
My collegue in office used to play Temple Run Brave during the complete office period with breaks of about 10-20 mins (he was serving notice period ). but the battery used to be at 30-40%.
But yesterday, the battery was down to 10% much before.
However, I would be sure only after a few days usage.
So I saw this lollipop rom(http://forum.xda-developers.com/showthread.php?t=2716306) and I was waiting for the official one from htc but this had what I wanted. It said I need to have the 4.4.4 firmware but I didnt know how to get it because I couldnt get the ota update on stock for a certain reason and so it flashed the 4.4.4 gpe rom then after that I flashed the 5.0 rom but now I have no wifi and when I reboot its in the bootloop and I dont know what to do now. I would appreciate it if anyone could try and help me. Thank you.
If you just flash a GPe rom it dosent mean you flashed the firmware. I was actually having this same problem so I just flashed the US Dev Sense 4.4.4 firmware and the Lollipop rom worked fine.
Guide on Flashing Firmware: http://forum.xda-developers.com/htc-one-m8/general/vomerguides-m8-bootldr-unlock-s-off-t2800727
Scroll all the way down and look for the 3.28.1540.5 firmware and flash that.
asap marcus said:
So I saw this lollipop rom(http://forum.xda-developers.com/showthread.php?t=2716306) and I was waiting for the official one from htc but this had what I wanted. It said I need to have the 4.4.4 firmware but I didnt know how to get it because I couldnt get the ota update on stock for a certain reason and so it flashed the 4.4.4 gpe rom then after that I flashed the 5.0 rom but now I have no wifi and when I reboot its in the bootloop and I dont know what to do now. I would appreciate it if anyone could try and help me. Thank you.
Click to expand...
Click to collapse
still need help? you need to just get back to bootloader an then enter recovery wipe device an restore a working backup so your phone is working an then go from there.
Tigerstown said:
still need help? you need to just get back to bootloader an then enter recovery wipe device an restore a working backup so your phone is working an then go from there.
Click to expand...
Click to collapse
forgot to backup but can I just flash the last rom I had.
asap marcus said:
forgot to backup but can I just flash the last rom I had.
Click to expand...
Click to collapse
Yea just do a wipe before...wipe both cache an data,system an then flash ROM should be good. Let me know what happens.
Tigerstown said:
Yea just do a wipe before...wipe both cache an data,system an then flash ROM should be good. Let me know what happens.
Click to expand...
Click to collapse
I got an answer and they posted the firmware so im going to try that first
Masterguy635 said:
If you just flash a GPe rom it dosent mean you flashed the firmware. I was actually having this same problem so I just flashed the US Dev Sense 4.4.4 firmware and the Lollipop rom worked fine.
Guide on Flashing Firmware: http://forum.xda-developers.com/htc-one-m8/general/vomerguides-m8-bootldr-unlock-s-off-t2800727
Scroll all the way down and look for the 3.28.1540.5 firmware and flash that.
Click to expand...
Click to collapse
Thanks im downloading the firmware now. Ive been waiting for the official update from HTC when that comes out should I flash that or should I stick with the one I have now.
even more broken
Masterguy635 said:
If you just flash a GPe rom it dosent mean you flashed the firmware. I was actually having this same problem so I just flashed the US Dev Sense 4.4.4 firmware and the Lollipop rom worked fine.
Guide on Flashing Firmware: http://forum.xda-developers.com/htc-one-m8/general/vomerguides-m8-bootldr-unlock-s-off-t2800727
Scroll all the way down and look for the 3.28.1540.5 firmware and flash that.
Click to expand...
Click to collapse
Before I flashed that firmware I wiped my phone and there is nothing on it. Also when I try to boot it it tells me to put in a password and I tried my google one but it didnt work also in twrp it says i have 0mb taken up on my phone. I also tried to adb sideload the rom to re flash it but that didnt work it said on my phone it couldnt put the file on my phone so it tried to put it on my ram. Are you sure that was the right firmware I have an att htc one m8. Also do you know what I can do or known some one that can help. Ive been having so many problems with my phone for two days straight and i havent able to use it.
Donot have to put in a password in recovery,format your data partition
asap marcus said:
Before I flashed that firmware I wiped my phone and there is nothing on it. Also when I try to boot it it tells me to put in a password and I tried my google one but it didnt work also in twrp it says i have 0mb taken up on my phone. I also tried to adb sideload the rom to re flash it but that didnt work it said on my phone it couldnt put the file on my phone so it tried to put it on my ram. Are you sure that was the right firmware I have an att htc one m8. Also do you know what I can do or known some one that can help. Ive been having so many problems with my phone for two days straight and i havent able to use it.
Click to expand...
Click to collapse
Wonders_Never_Cease said:
Donot have to put in a password in recovery,format your data partition
Click to expand...
Click to collapse
Thankyou so much it worked. But I don't know if its gonna get stuck in a boot loop thought but im not going to try to find that out now
Very welcome glad it got sorted out.
asap marcus said:
Thankyou so much it worked. But I don't know if its gonna get stuck in a boot loop thought but im not going to try to find that out now
Click to expand...
Click to collapse
Hey everyone and thanks for your help.
I deleted what seemed to me to be some worthless apps from my galaxy pocket neo using an app and now my phone is stuck on the boot screen. I have tried factory resetting my phone and after rebooting my phone will go through the original setup process, but ultimately after going through all the menus my phone becomes unresponsive. I am thinking that I need a new os.
I have seen the other help thread "stuck on boot logo" and I tried to understand the directions giving there, but have so far been unable to resolve anything. If I could get some clear instructions as to what might fix my phone I'd appreciate it.
nosrednaski said:
Hey everyone and thanks for your help.
I deleted what seemed to me to be some worthless apps from my galaxy pocket neo using an app and now my phone is stuck on the boot screen. I have tried factory resetting my phone and after rebooting my phone will go through the original setup process, but ultimately after going through all the menus my phone becomes unresponsive. I am thinking that I need a new os.
I have seen the other help thread "stuck on boot logo" and I tried to understand the directions giving there, but have so far been unable to resolve anything. If I could get some clear instructions as to what might fix my phone I'd appreciate it.
Click to expand...
Click to collapse
Go here
Flash Samsung stock ROM for your phone and baseband using Odin. It should be back to normal. It will be back to unrooted factory state.
Alternatively, if your cwm is still working, just flash a ROM zip after wiping data, cache, advamced->dalvik cache.
Do mounts and storage-> mount system->format system in CWM before flashing ROM if above 2 methods do not work (though I'm very sure one of them would work)
---------- Post added at 12:53 AM ---------- Previous post was at 12:50 AM ----------
Make sure that you flash the ROM of Samsung s5312 and not the one mentioned in the Odin guide. Search for it .
I can't seem to find a site that will let me download the stock rom. All of the rom sites bring me to uploaded.net and I dead end there... Is there something I am missing on that website?
Thanks!
problem app system
May be you remove any important system app so i think you should install stockrom by odin or install custom rom ) there are many nice rom such as: cm11 , cm10.1
Same Problem
nosrednaski said:
I can't seem to find a site that will let me download the stock rom. All of the rom sites bring me to uploaded.net and I dead end there... Is there something I am missing on that website?
Thanks!
Click to expand...
Click to collapse
Hi, have you found a solution to your issue? I am also stuck at the moment.
Never found a rom
bilicool said:
Hi, have you found a solution to your issue? I am also stuck at the moment.
Click to expand...
Click to collapse
I never did. I had to buy another phone.
nosrednaski said:
I never did. I had to buy another phone.
Click to expand...
Click to collapse
Ah i see. My apologies, I managed to fix it but it took a while. I had to download the official firmware from sammobile and flash it through odin. When i did that again i was stuck on the boot animation, but what i did was to go into my recovery and wipe cache, dalvik and also user data just to make certain and voila! phone works fine now.
I'm so sorry about your situation man, maybe you can try what i tried if you still got your phone. Its good as a spare!
Well done Sir!
I already spent a full work day on the sucker >.> I am just bitter and can't be bothered. Haha. Glad you were successful though!
Hello guys i really need your help.As Title said my phone is extremelly laggy and weird on this is that it is doing on every ROM i install.It even lag on CWM.Boot is also laggy.I dont know what can be problem it start yesterday after reboot.I try Factory reset,Wipe SD card and all data,cache.Nothing helped.Thx for any help guys. :crying:
Anyone ?
Kamilolo987 said:
Hello guys i really need your help.As Title said my phone is extremelly laggy and weird on this is that it is doing on every ROM i install.It even lag on CWM.Boot is also laggy.I dont know what can be problem it start yesterday after reboot.I try Factory reset,Wipe SD card and all data,cache.Nothing helped.Thx for any help guys. :crying:
Click to expand...
Click to collapse
do u wipe before flash custom rom
amin44 said:
do u wipe before flash custom rom
Click to expand...
Click to collapse
Yeah i wipe data,cache and dalvik cache. Nothing helped. I think maybe its hardware problem but i dont know really.
this can be from processor frequency , try gingerbread ROM
amin44 said:
this can be from processor frequency , try gingerbread ROM
Click to expand...
Click to collapse
I try this ROM http://forum.xda-developers.com/xperia-u/u-development/gb-gingerbeanss-3-5-02-11-t2470223 and it give me weird bootloop.I boot after SONY and nothing happened only blank screen.
try flash official gingerbread via flashtool
amin44 said:
try flash official gingerbread via flashtool
Click to expand...
Click to collapse
Tried that give me the same blank screen with LED on.Only ICS ROM Boot up.