Hey guys,
I have tried to upgrade my Micromax A116 to the official update of 4.2 jelly bean. But as soon as i reboot my phone after flashing it using the basic SP tools method, my screen continuously goes on and off. Has anybody else come across this problem? If yes, then can you please share with me the solution? Now i am back to the stock rom of 4.1.2..Any kind of help is appreciated..Thank you..:cyclops: I really want to update it to 4.2.1..
PS: Am i the only one around here who thinks that the stock rom is better than any other custom roms for micromax a116?:laugh:
There are others who reported the same problem. But as of now there doesn't seem to be any solutions as its happening to only some of CHD devices
Thanks
tmohans said:
There are others who reported the same problem. But as of now there doesn't seem to be any solutions as its happening to only some of CHD devices
Click to expand...
Click to collapse
Just wanted to see if I was the only one. Thanks anyway
Possible Solution
1. Don't keep your mobile on auto-brightness.
2. Go to your WiFi and click on it and then hit the menu button on left and then go to advanced option and turn off WiFi optimization.
This will solve your flickering issue.
======================================
or enable Hardware overlay from developer options.
P.S: I am not experiencing any flickering so these steps haven't been tried by me.. try on your own and reply if it helped.:good::fingers-crossed:
I am facing the same problem. I tried hardware overlay and auto brightness but no success. I never tried WiFi though. I had flashed my device more than 10 times now.
Sent from my Micromax A116 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:30 PM ----------
Same problem with my handset as well. So far no resolution.
Sent from my Micromax 6 using xda app-developers app
neatearth said:
I am facing the same problem. I tried hardware overlay and auto brightness but no success. I never tried WiFi though. I had flashed my device more than 10 times now.
Sent from my Micromax A116 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:30 PM ----------
Same problem with my handset as well. So far no resolution.
Sent from my Micromax 6 using xda app-developers app
Click to expand...
Click to collapse
Worth waiting for service center for 4.2 update for your phone. Stop experimenting further and stay on 4.1.2 backup.
WARNING: If you try SP TOOL to flash 4.2 on your phone for some more time, you may LOSE IMEI codes and phone will be literally useless and you need to give it to service center, with a RISK of service rejection coz you rooted it. If you dont know how to unroot and restore stock recovery, you will be in trouble. So keep using 4.1.2 and be safe. Later, dont tell people, no one warned you. Telling you from my own experience.
Should I flash using recovery mode ?
Sent from my Micromax A116 using xda app-developers app
adizrox said:
1. Don't keep your mobile on auto-brightness.
2. Go to your WiFi and click on it and then hit the menu button on left and then go to advanced option and turn off WiFi optimization.
This will solve your flickering issue.
======================================
or enable Hardware overlay from developer options.
P.S: I am not experiencing any flickering so these steps haven't been tried by me.. try on your own and reply if it helped.:good::fingers-crossed:
Click to expand...
Click to collapse
Tried it..but it didn't work.. But thanks anyway
Lyyclec extraneus
cmahendra said:
Worth waiting for service center for 4.2 update for your phone. Stop experimenting further and stay on 4.1.2 backup.
WARNING: If you try SP TOOL to flash 4.2 on your phone for some more time, you may LOSE IMEI codes and phone will be literally useless and you need to give it to service center, with a RISK of service rejection coz you rooted it. If you dont know how to unroot and restore stock recovery, you will be in trouble. So keep using 4.1.2 and be safe. Later, dont tell people, no one warned you. Telling you from my own experience.
Click to expand...
Click to collapse
@cmahendra I have read one of your posts where you have mentioned that you had the same problem(Screen Blinking). Did you manage to get over it? Which method did you try to flash. Please share your experience. It will be quite helpful. At present I am planning to try TWRP recovery to flash. I do not know if it will work.... Will keep update.
Screen Blinking
Hello,
I followed the procedure several times.
this saturday I spent the whole day trying to flash 4.2.1 sotck rom on my phone. But, got the same screen blinking issue.
I've TWRP installed and tried the tweaked Flash-able rom as well as the SP tools flash-able one. but the same issue.
I followed below three routes:
1. Flashed stock rom .16 to make the phone factory state.
2. Then first tried flashing .20 update. Flashed successfully, but the screen started blinking as soon as the phone rebooted, i.e. right when the boot animation starts. I disabled auto brightness as well as disabled HW overlay. but the issue stayed.
3. I again flashed .16 and then 4.2.1 updated rom, first as 'Download' option in SP flash tools, but the same issue occured. I then tried, 'Firmware upgrade' still the same issue.
4. flashed .16 again; flashed TWRP, tried the tweaked zip flash-able rom, but same issue.
5. Tried custom ROM JellyDemon v2.2, the phone was not stuck at bootscreen.
6. in so much of flashing lost IMEI. so, flashed stock .16 again, installed TWRP, extended phone storage to 2.5 GB flashed Jellyxperia 4.1.2 based custom rom, swapped internal storage and then used Mobileuncle MTK toolkit to restore IMEI (I had used the same earlier to backup the IMEI to external SD card.
So, basically I'm back to square one after spending almost 8 hours to get 4.2 update :crying:. If only the blinking screen issue could be fixed :crying:
Sauravh said:
Hello,
I followed the procedure several times.
this saturday I spent the whole day trying to flash 4.2.1 sotck rom on my phone. But, got the same screen blinking issue.
I've TWRP installed and tried the tweaked Flash-able rom as well as the SP tools flash-able one. but the same issue.
I followed below three routes:
1. Flashed stock rom .16 to make the phone factory state.
2. Then first tried flashing .20 update. Flashed successfully, but the screen started blinking as soon as the phone rebooted, i.e. right when the boot animation starts. I disabled auto brightness as well as disabled HW overlay. but the issue stayed.
3. I again flashed .16 and then 4.2.1 updated rom, first as 'Download' option in SP flash tools, but the same issue occured. I then tried, 'Firmware upgrade' still the same issue.
4. flashed .16 again; flashed TWRP, tried the tweaked zip flash-able rom, but same issue.
5. Tried custom ROM JellyDemon v2.2, the phone was not stuck at bootscreen.
6. in so much of flashing lost IMEI. so, flashed stock .16 again, installed TWRP, extended phone storage to 2.5 GB flashed Jellyxperia 4.1.2 based custom rom, swapped internal storage and then used Mobileuncle MTK toolkit to restore IMEI (I had used the same earlier to backup the IMEI to external SD card.
So, basically I'm back to square one after spending almost 8 hours to get 4.2 update :crying:. If only the blinking screen issue could be fixed :crying:
Click to expand...
Click to collapse
I feel you bro.. I also have tried to install the 4.2 update like 3-4 times.. Everytime i get the same issue.. But I haven't occured an issue with any other custom roms.. But I have the same issue with tweaked roms.. GOD HELP US:crying:
hardiktrivedi0612 said:
I feel you bro.. I also have tried to install the 4.2 update like 3-4 times.. Everytime i get the same issue.. But I haven't occured an issue with any other custom roms.. But I have the same issue with tweaked roms.. GOD HELP US:crying:
Click to expand...
Click to collapse
Now, I'm thinking as My phone is less than 30 days old, Should I give it to SVC to upgrade, I'll first flash the stock rom and then give it to svc, So, If they face the blinking issue, may be I could get replacement with updated stock ROM.. But need to find the svc in Noida or nearby
Sauravh said:
Now, I'm thinking as My phone is less than 30 days old, Should I give it to SVC to upgrade, I'll first flash the stock rom and then give it to svc, So, If they face the blinking issue, may be I could get replacement with updated stock ROM.. But need to find the svc in Noida or nearby
Click to expand...
Click to collapse
:laugh::laugh: But make sure that you properly unroot it first and flash .16 stock rom..
hardiktrivedi0612 said:
Hey guys,
I have tried to upgrade my Micromax A116 to the official update of 4.2 jelly bean. But as soon as i reboot my phone after flashing it using the basic SP tools method, my screen continuously goes on and off. Has anybody else come across this problem? If yes, then can you please share with me the solution? Now i am back to the stock rom of 4.1.2..Any kind of help is appreciated..Thank you..:cyclops: I really want to update it to 4.2.1..
PS: Am i the only one around here who thinks that the stock rom is better than any other custom roms for micromax a116?:laugh:
Click to expand...
Click to collapse
tmohans said:
There are others who reported the same problem. But as of now there doesn't seem to be any solutions as its happening to only some of CHD devices
Click to expand...
Click to collapse
neatearth said:
I am facing the same problem. I tried hardware overlay and auto brightness but no success. I never tried WiFi though. I had flashed my device more than 10 times now.
Sent from my Micromax A116 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:30 PM ----------
Same problem with my handset as well. So far no resolution.
Sent from my Micromax 6 using xda app-developers app
Click to expand...
Click to collapse
neatearth said:
@cmahendra I have read one of your posts where you have mentioned that you had the same problem(Screen Blinking). Did you manage to get over it? Which method did you try to flash. Please share your experience. It will be quite helpful. At present I am planning to try TWRP recovery to flash. I do not know if it will work.... Will keep update.
Click to expand...
Click to collapse
Sauravh said:
Hello,
I followed the procedure several times.
this saturday I spent the whole day trying to flash 4.2.1 sotck rom on my phone. But, got the same screen blinking issue.
I've TWRP installed and tried the tweaked Flash-able rom as well as the SP tools flash-able one. but the same issue.
I followed below three routes:
1. Flashed stock rom .16 to make the phone factory state.
2. Then first tried flashing .20 update. Flashed successfully, but the screen started blinking as soon as the phone rebooted, i.e. right when the boot animation starts. I disabled auto brightness as well as disabled HW overlay. but the issue stayed.
3. I again flashed .16 and then 4.2.1 updated rom, first as 'Download' option in SP flash tools, but the same issue occured. I then tried, 'Firmware upgrade' still the same issue.
4. flashed .16 again; flashed TWRP, tried the tweaked zip flash-able rom, but same issue.
5. Tried custom ROM JellyDemon v2.2, the phone was not stuck at bootscreen.
6. in so much of flashing lost IMEI. so, flashed stock .16 again, installed TWRP, extended phone storage to 2.5 GB flashed Jellyxperia 4.1.2 based custom rom, swapped internal storage and then used Mobileuncle MTK toolkit to restore IMEI (I had used the same earlier to backup the IMEI to external SD card.
So, basically I'm back to square one after spending almost 8 hours to get 4.2 update :crying:. If only the blinking screen issue could be fixed :crying:
Click to expand...
Click to collapse
try to flash this file..
this file fixed the issue for some people..
build prop values are stock 4.2
http://d-h.st/L22
hottesthunkkush said:
try to flash this file..
this file fixed the issue for some people..
build prop values are stock 4.2
http://d-h.st/L22
Click to expand...
Click to collapse
Will try it for sure.... Love your work BTW!! keep up the good work:good:
hardiktrivedi0612 said:
Will try it for sure.... Love your work BTW!! keep up the good work:good:
Click to expand...
Click to collapse
Did you try the flickerfix.zip ? Please let me know
---------- Post added at 05:38 AM ---------- Previous post was at 05:30 AM ----------
hottesthunkkush said:
try to flash this file..
this file fixed the issue for some people..
build prop values are stock 4.2
http://d-h.st/L22
Click to expand...
Click to collapse
I am using TWRP and right now on 4.1.2 . Can not upgrade to 4.2 due to blinking issue. Should I flash using flickerfix.zip before upgradation to 4.1 or should do after upgrading to 4.2 ? I will use SP lfash tool to upgrade. I will really appreciate if you can provide a step by step guidance.
thanking you
neatearth said:
Did you try the flickerfix.zip ? Please let me know
Sorry haven't got the time yet.. But will surely let you know when i do.
Click to expand...
Click to collapse
neatearth said:
I am using TWRP and right now on 4.1.2 . Can not upgrade to 4.2 due to blinking issue. Should I flash using flickerfix.zip before upgradation to 4.1 or should do after upgrading to 4.2 ? I will use SP lfash tool to upgrade. I will really appreciate if you can provide a step by step guidance.
thanking you
Click to expand...
Click to collapse
Flash 4.2 First then flickerfix.zip
same situation
Sauravh said:
Hello,
I followed the procedure several times.
this saturday I spent the whole day trying to flash 4.2.1 sotck rom on my phone. But, got the same screen blinking issue.
I've TWRP installed and tried the tweaked Flash-able rom as well as the SP tools flash-able one. but the same issue.
I followed below three routes:
1. Flashed stock rom .16 to make the phone factory state.
2. Then first tried flashing .20 update. Flashed successfully, but the screen started blinking as soon as the phone rebooted, i.e. right when the boot animation starts. I disabled auto brightness as well as disabled HW overlay. but the issue stayed.
3. I again flashed .16 and then 4.2.1 updated rom, first as 'Download' option in SP flash tools, but the same issue occured. I then tried, 'Firmware upgrade' still the same issue.
4. flashed .16 again; flashed TWRP, tried the tweaked zip flash-able rom, but same issue.
5. Tried custom ROM JellyDemon v2.2, the phone was not stuck at bootscreen.
6. in so much of flashing lost IMEI. so, flashed stock .16 again, installed TWRP, extended phone storage to 2.5 GB flashed Jellyxperia 4.1.2 based custom rom, swapped internal storage and then used Mobileuncle MTK toolkit to restore IMEI (I had used the same earlier to backup the IMEI to external SD card.
So, basically I'm back to square one after spending almost 8 hours to get 4.2 update :crying:. If only the blinking screen issue could be fixed :crying:
Click to expand...
Click to collapse
i tried almost everything u tried, now back to stock .16 , all other roms had the screen flickering issue, never tried jellyxperia though, are u using jellyxperia now?? have u found any solution?? is jellyxperia facing the same problem?? thanks
sweetrascal said:
i tried almost everything u tried, now back to stock .16 , all other roms had the screen flickering issue, never tried jellyxperia though, are u using jellyxperia now?? have u found any solution?? is jellyxperia facing the same problem?? thanks
Click to expand...
Click to collapse
I'm using Jellyxperia. it does not have blinking issue as it is based on 4.1.2.
It's faster than stock and I like the Walkman music player. However, I noticed that battery drains faster comparing to stock 4.1.2.
My collegue in office used to play Temple Run Brave during the complete office period with breaks of about 10-20 mins (he was serving notice period ). but the battery used to be at 30-40%.
But yesterday, the battery was down to 10% much before.
However, I would be sure only after a few days usage.
Related
Hi All,
Hope you are well. I just flashed the CWM recovery to a locked tab using ODIN, and upon doing POWER + VOL(-) and getting into the recovery, for some reason the screen with all the menu to do wipes/install just seems to be scrolling all over the place.
When I re-flash the stock recovery back using ODIN, the screen is fine again. Tried both 4.0.0.4 and also the 3.2.0.1 versions, with not much luck.
Has anyone had a similar incident? Is there anything I can do? I wanted to try and flash my custom boot.img.
Thanks heaps in advance!!!.
Hi Folks,
Hope you are well - wasn't sure if anyone has come across this - but anyone seen the Recovery mode flickering / scrolling when flashed on a locked Galaxy Tab 10.1?
Thanks again!
I'm using CWM 4.0.0.4 on my locked P7510, works as intended.
http://forum.xda-developers.com/showthread.php?t=1171089
Thanks yqed,
For some reason when I have CWM 4.0.0.4, and when I reboot into the recovery mode - CWM shows up - but the screen keeps on flickering / scrolling / refreshing all over the place.
I'm wondering if there is something different in my Retail Galaxy Tab 10.1 WIFI vs. the others - I bought mine from Korea (retail). Appears that I have kernel version 2.6.36.3 instead of .4 and the build is EH14.
Thanks.
I to get some lag while using the cmw...
Sent from my Galaxy Tab!
+1
I have a Korean 32Gb wifi Galaxy Tab 10.1, and my CWM Recovery also starts having a seizure when I boot into it. It still seems to be working fine, but it is nearly impossible to use.
I would really like to know what causes this issue.
Thanks limenless,
Anyone seen this before? Anyone know if CWM 5 might potentially fix this - seens some thread with regards to this.
I was going to try and wipe the dalvik cache, and others, but seeing the screen is almost impossible to use in recovery mode, having a bit of difficulty there.
Any advice is much appreciated - if you need dumps and others, happy to provide - as long as I get some instructions...
Thanks.
frankus0512 said:
Thanks limenless,
Anyone seen this before? Anyone know if CWM 5 might potentially fix this - seens some thread with regards to this.
I was going to try and wipe the dalvik cache, and others, but seeing the screen is almost impossible to use in recovery mode, having a bit of difficulty there.
Any advice is much appreciated - if you need dumps and others, happy to provide - as long as I get some instructions...
Thanks.
Click to expand...
Click to collapse
Any luck bro? having same problem here..
Please help.. i realy want to root my tab 10.1
castiel19 said:
Any luck bro? having same problem here..
Please help.. i realy want to root my tab 10.1
Click to expand...
Click to collapse
Are you using the cwm5?
I'M just curious if so and you still get issues.
Sorry I can't really help.
If you can read this it was sent using my GT-P7510.
HOPING solution
frankus0512 said:
Hi All,
Hope you are well. I just flashed the CWM recovery to a locked tab using ODIN, and upon doing POWER + VOL(-) and getting into the recovery, for some reason the screen with all the menu to do wipes/install just seems to be scrolling all over the place.
When I re-flash the stock recovery back using ODIN, the screen is fine again. Tried both 4.0.0.4 and also the 3.2.0.1 versions, with not much luck.
Has anyone had a similar incident? Is there anything I can do? I wanted to try and flash my custom boot.img.
Thanks heaps in advance!!!.
Click to expand...
Click to collapse
Did you try CMW 5? Preshoot has a tutorial in the development section, its pretty simple just follow it and I think and hope that your issue would be solved!
Why dont you try taking a picture/screenshot of it, best would be using ddms.bat in the android development kit to take screenshot's , or just a picture would do great. Hard to guess what's going on, when someone mentioned seizure, I pictured Dr.House
Misledz said:
Why dont you try taking a picture/screenshot of it, best would be using ddms.bat in the android development kit to take screenshot's , or just a picture would do great. Hard to guess what's going on, when someone mentioned seizure, I pictured Dr.House
Click to expand...
Click to collapse
Thank you for showing interest to help me.. btw am also big fan of house
Let me explain my situation from the start..
i tried to flash recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 following the instruction from the tutorial.. but after i boot into recovery the screen flash.. I will attach you tube video later..
took whole night to fix it with no success, finally decided to re-flash stock rom from firmware P7510ZSKK1_P7510ZZHKK1_TGY.. boot into stock recovery and worked fine..
as i don't want to give up and want my tab 10.1 to be rooted tried again to flash CWM5027 from preshoot.. but same screen flicker happened..
Please help me fix the problem.. or do you know other way to root my tab??
---------- Post added at 12:49 PM ---------- Previous post was at 12:40 PM ----------
castiel19 said:
Thank you for showing interest to help me.. btw am also big fan of house
Let me explain my situation from the start..
i tried to flash recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 following the instruction from the tutorial.. but after i boot into recovery the screen flash.. I will attach you tube video later..
took whole night to fix it with no success, finally decided to re-flash stock rom from firmware P7510ZSKK1_P7510ZZHKK1_TGY.. boot into stock recovery and worked fine..
as i don't want to give up and want my tab 10.1 to be rooted tried again to flash CWM5027 from preshoot.. but same screen flicker happened..
Please help me fix the problem.. or do you know other way to root my tab??
Click to expand...
Click to collapse
how can i copy link of youtube here?? i want to show my screen flicker
Just link it here,
HTML:
[media=youtube] bracket [/media]
Where "bracket" is the ID of your video, those letters at the end. EG: FL7yD-0pqZg
Have you tried Overcome's CWM? I'm using that and it's perfectly fine. PS it's the ver 5 release.
PS; For being an epic House fan I shall see to it that you get it worked out
And to top that off, an offlink to the CWM of Overcome http://www.mediafire.com/?6c5tdmds927npdv
PS: Here's your video, Embedded anyways.
I'm on the same page. My screen flicker after entering CWM recovery mode. Very annoying.
In the development section for 10.1 I was just reading in a thread about a Korean ROM, Pershoot stated something about someones device not being compatible with his kernel. I don't know if either one has to do with the other but I think I read in the same thread of someone having "this problem"
Honestly don't know if anything between this thread and that thread are relevant to each other.
Just thought I'd mention it to see if it helps. sorry if it doesn't apply to anything here.
I somehow fixed it by flashing the tab with an non-HK 3.1 stock ROM using Odlin. then then cwm recovery works fine.
Not really a fix but
You could always just find a pre rooted rom to flash with odin, then once u have the pre rooted rom installed get rom manager and u will no longer have to worry about cwm. Plus u could then flash to whatever rom u need to using rom manager.
My method allows me to have a clear screen in CWM RECOVERY but after I flashed Galaxy Task 14 I get all blurred screen whenever my Tab is resumed from standby. I must set my screen to never turn off to prevent it flickering again.
May I ask which pre rooted ODLIN ROM do you guys recommend? If possible can you please provide the URL to it? I suspect the flickering problem has relation to the harmony between bootloader, kernel etc so I want to use the exact combination you guys are using.
Sent from my GT-I9100 using Tapatalk
Still not working
appreciate your help Misledz, 002001-Overcome_CWM_Recovery_v5.1.2.6 got same result.. my screen still flicker..
I think I will give up on CWM too complicated for me
Can you just give me tips on how to root my tab 10.1 without CWM (if that is possible)
sunnymui said:
My method allows me to have a clear screen in CWM RECOVERY but after I flashed Galaxy Task 14 I get all blurred screen whenever my Tab is resumed from standby. I must set my screen to never turn off to prevent it flickering again.
May I ask which pre rooted ODLIN ROM do you guys recommend? If possible can you please provide the URL to it? I suspect the flickering problem has relation to the harmony between bootloader, kernel etc so I want to use the exact combination you guys are using.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
What Stock Rom did you use? a, planning to download stock rom
P7510ZCLA1 ## 2012 February P7510OZHLA1 China Download
From samfirmware and flash... hope I can use CWM and instal ROM
for the past 3 hours I tried to search pre rooted ROM that can be flash using Odin with no avail
hi.
i flashed stock rom S5830XWKS2 through Odin. the phone started rebooting randomly.
then i flashed custom rom TheMyth KS3 but the problem kept getting worse. when i'm using the phone, it reboots every few seconds.
i flashed stock rom S5830XWKS3. but the Baseband version in the phone didnt change (S5830XWKS2). and the problem is still persistent.
the phones does not do full reboot. it freezes, the screen goes black, then goes strait to the boot animation.
also, if it reboots while transferring files through mass usb storage, the transfer doesnt stop, to continues normally.
1. any idea why is this happening?
2. why didnt the baseband version change when i flashed KS3?
3. do you recommend another stock rom to flash.
p.s: KS3 seems fast. i got 1040 score in quadrant on stock rom.
i would appreciate any help. thanks
dali47 said:
hi.
i flashed stock rom S5830XWKS2 through Odin. the phone started rebooting randomly.
then i flashed custom rom TheMyth KS3 but the problem kept getting worse. when i'm using the phone, it reboots every few seconds.
i flashed stock rom S5830XWKS3. but the Baseband version in the phone didnt change (S5830XWKS2). and the problem is still persistent.
the phones does not do full reboot. it freezes, the screen goes black, then goes strait to the boot animation.
also, if it reboots while transferring files through mass usb storage, the transfer doesnt stop, to continues normally.
1. any idea why is this happening?
2. why didnt the baseband version change when i flashed KS3?
3. do you recommend another stock rom to flash.
p.s: KS3 seems fast. i got 1040 score in quadrant on stock rom.
i would appreciate any help. thanks
Click to expand...
Click to collapse
Hey !
The Baseband Version is KS2 while Build is KS9 (in my stock rom)
If you end in Bootloops, press Power + Home till you get into recovery, then Clear data/Factory Reset and clear Cache, then reboot.
Come back and tell me if it worked for you.
Greetings
thank you for your reply.
it's actually not a bootloop. the phone boots normally and works fine for some times (few seconds/minutes) then it freezes for few seconds, then the screen turns black for a second, then shows the boot animation (doesn't show the boot screen with the samsung logo). it works fine for some time, then again.
it seems that the problem is related to the wifi. it only happens when wifi is on.
On Samfirmware.com they say that you should make a Factory Reset after flashing, maybe that works for you ? I flashed the KS9 Stock today and had some problems till I did this in Recovery. Else I would have no Idea, maybe reflash or get another Version ?
You could also try to install any custom Rom, like Jusada´s ICS for example, just to test if there are problems with CM also ..
Umm, maybe a question to those who only touch the Earth to answer our Newb questions...is it possible that the Ace restarts when it get´s attacked from the outside ? I faced that after flashing a Rom that I modified and didn´t have the right Permissions the Phone restarted/bootlooped when I tried to install any App (\data\app wasn´t set correct)
Greetings
thank you. i guess i'll try to flash again. or maybe try a different stock.
dali47 said:
thank you. i guess i'll try to flash again. or maybe try a different stock.
Click to expand...
Click to collapse
If you had the Android SDK Tools , you could show me a logcat of what's going on
EmoBoiix3 said:
If you had the Android SDK Tools , you could show me a logcat of what's going on
Click to expand...
Click to collapse
hi. i do have the sdk. here are a few log files:
http://pastebin.com/Amt00nuY
http://pastebin.com/SHeasfvq
http://pastebin.com/sirV2FEe
this is the first time i use logcat, so if there is a command or option i should use to make the log file more useful, just let me know.
thank you for your time
dali47 said:
hi. i do have the sdk. here are a few log files:
http://pastebin.com/Amt00nuY
http://pastebin.com/SHeasfvq
http://pastebin.com/sirV2FEe
this is the first time i use logcat, so if there is a command or option i should use to make the log file more useful, just let me know.
thank you for your time
Click to expand...
Click to collapse
The original TheMyth creator said that KS3 was badly unstable .
Use KS2 instead
Sent from my GT-S5830 using XDA App
EmoBoiix3 said:
The original TheMyth creator said that KS3 was badly unstable .
Use KS2 instead
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
He should try to upgrade to KS3 v1.1. That's final update for TheMyth KS3 with:
- Meizu Myth theme
- BLN Control activated
- changed some small things
>> I think this update can help him to solve frequent random reboot in TheMyth KS3
http://mobile.livemodding.com/forum/398-samsung-galaxy-ace/
Click to expand...
Click to collapse
my first attempt was with KS2. that's when the problem started, even before i install TheMyth. The 1.1 update didnt help either.
I guess my phone is not getting along with the KS2 baseband. i will just switch to GingerReal, hopefully it will be stable.
thank you everyone
hi guys,
im facing a new problem in my phone after couple of works i have done today.
i was runnig this stock rom 9300XXELKC_I9300OXXELK4_I9300XXELKC_HOME on my s3 with android JB 4.1.2.
today i tried to install the leakd JB 4.2.2 fro sammobile and successfully upgraded the rom...
after sometime i realized the phone freezes and no matter how much u wait,nothin changes n onli way is to reboot the phone manualli.
i have formated n factory reset the phone also but still the same problem was thr(infact it got worst)
i have downgraded to the previous stock rom i had n did wipe everythin but now also the phone freezes sometime...
whats the reason behind it?plz help,its irritatin.
thank u
sinahidden said:
hi guys,
im facing a new problem in my phone after couple of works i have done today.
i was runnig this stock rom 9300XXELKC_I9300OXXELK4_I9300XXELKC_HOME on my s3 with android JB 4.1.2.
today i tried to install the leakd JB 4.2.2 fro sammobile and successfully upgraded the rom...
after sometime i realized the phone freezes and no matter how much u wait,nothin changes n onli way is to reboot the phone manualli.
i have formated n factory reset the phone also but still the same problem was thr(infact it got worst)
i have downgraded to the previous stock rom i had n did wipe everythin but now also the phone freezes sometime...
whats the reason behind it?plz help,its irritatin.
thank u
Click to expand...
Click to collapse
did you wipe everything from stock recovery immediately after flashing leaked 4.2.2 ?
sriram231092 said:
did you wipe everything from stock recovery immediately after flashing leaked 4.2.2 ?
Click to expand...
Click to collapse
no not immediately,but after i got few times freezing,i did that.but after that also my phone was hanging,i can say even more...:|
sinahidden said:
no not immediately,but after i got few times freezing,i did that.but after that also my phone was hanging,i can say even more...:|
Click to expand...
Click to collapse
if you do not wipe immediately, you get some system ui has stopped like something. so it is always good to wipe as soon as you see samsung logo after the rom is flashed. pull out the battery and quickly boot into recovery and wipe everyhting and you should be good to go
sriram231092 said:
if you do not wipe immediately, you get some system ui has stopped like something. so it is always good to wipe as soon as you see samsung logo after the rom is flashed. pull out the battery and quickly boot into recovery and wipe everyhting and you should be good to go
Click to expand...
Click to collapse
i have done that,infact without doing that my phone wuldnt have boot up after the downgrade...
but that problem still resist...can it be due to some corrupted file which might be cuzd by 4.2.2 ?maybe it spoiled some system file.
sinahidden said:
i have done that,infact without doing that my phone wuldnt have boot up after the downgrade...
but that problem still resist...can it be due to some corrupted file which might be cuzd by 4.2.2 ?maybe it spoiled some system file.
Click to expand...
Click to collapse
may be yeah(not sure). did the same happen with any custom roms? or only stock ones?
sriram231092 said:
may be yeah(not sure). did the same happen with any custom roms? or only stock ones?
Click to expand...
Click to collapse
i've been on stock roms since i got the phone,so cant say anythin cuz i didnt flash any custom rom.
Good day. I had this phone for awhile and I don't know what went wrong. When I turn my WiFi on, it says error. The Bluetooth never turns on too. Can someone tell me how I can fix these problems? I beg you and I appreciate it very much
Sent from my MT27i using xda app-developers app
noehmyerae said:
Good day. I had this phone for awhile and I don't know what went wrong. When I turn my WiFi on, it says error. The Bluetooth never turns on too. Can someone tell me how I can fix these problems? I beg you and I appreciate it very much
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
Did you install any app/mod/kernel/rom or this just happened suddenly?
It happened suddenly. I'm on stock ROM and I can't remember I dropped this phone off or whatsoever. 3G works fine but to save data usage, I need my WiFi to work. Do you have any recommendations? Thank you for the response
Sent from my MT27i using xda app-developers app
noehmyerae said:
It happened suddenly. I'm on stock ROM and I can't remember I dropped this phone off or whatsoever. 3G works fine but to save data usage, I need my WiFi to work. Do you have any recommendations? Thank you for the response
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
Do a factory reset.
Should work !
Sent from my Xperia U using xda app-developers app
or u can flash a FTF by flashtool or repair using PCC
If you have root, you can flash Memory Tweaks by munjeni
Sent by typing on my Xperia Sola with my fingers using xda premium
Thank you guys for the kind responses.. I tried factory reset, flash gb and ics stock rom, and seus but no luck. I have to stay on gb rom coz when I'm on ics, it's worse causing infinite bootloops when I turn my wifi on.
Sent from my MT27i using Tapatalk 2
I guess it's hardware problem then coz I tried jb Rom by munjeni and it's the same thing. Luckily I have cwm to restore my system.
Sent from my MT27i
Sony xperia Sola wifi error?? plz help?
hey i bought xperia sola 3 months ago it was working fine on gingerbread but one day when i connected to wifi it says error
my router configuration was saved in my phone eg password etc
when i turned on my wifi in my cousins house it suddenly said "Error" when i update to ICS it becomed worse when i turn on wifi the phone stars restarting itself and bluetooth wont turn on. . .
My router name is PTCL-BB and my Cousins Router Name is also PTCL-BB but have different settings and password. . . when i turned on it in my cousins house my phone started auto connecting to his network when i tried to cancel it it suddenly said error and when every time i turn it on it says error. . . .
Plz help me i cant buy another phone because i dont have money
:crying:
Ali409 said:
hey i bought xperia sola 3 months ago it was working fine on gingerbread but one day when i connected to wifi it says error
my router configuration was saved in my phone eg password etc
when i turned on my wifi in my cousins house it suddenly said "Error" when i update to ICS it becomed worse when i turn on wifi the phone stars restarting itself and bluetooth wont turn on. . .
My router name is PTCL-BB and my Cousins Router Name is also PTCL-BB but have different settings and password. . . when i turned on it in my cousins house my phone started auto connecting to his network when i tried to cancel it it suddenly said error and when every time i turn it on it says error. . . .
Plz help me i cant buy another phone because i dont have money
:crying:
Click to expand...
Click to collapse
If you bought it 3 month ago is it not with warrenty still?
It may be hardware problem and that we can't fix.
You can try factory reset, but that will erase all your settings and installed apps, contacts, messages etc, so you better have backup of everything before you try.
How did you upgrade to ICS, with PC Companion/SUS or flashtool?
ChikeD said:
If you bought it 3 month ago is it not with warrenty still?
It may be hardware problem and that we can't fix.
You can try factory reset, but that will erase all your settings and installed apps, contacts, messages etc, so you better have backup of everything before you try.
How did you upgrade to ICS, with PC Companion/SUS or flashtool?
Click to expand...
Click to collapse
first i updated it with pc companion than i downgrade it to GB
than again i upgraded it to ICS with flashtool
Ali409 said:
first i updated it with pc companion than i downgrade it to GB
than again i upgraded it to ICS with flashtool
Click to expand...
Click to collapse
It is noting to worry it is a common bug on certain stock roms and did you install or uninstall any battery saver apps or Taskmanager apps? and don't worry either flash a different stock version with flashtool please post more specific info about ur device (such as rooted or bootloader unlocked, etc)
since you are new member i assume u are just using a unrooted stock Rom with unlocked bootloader.
BUT FIRST TRY OUT A NEW STOCK OR JUST REFLASH THE SAME ROM U HAVE
with both
ChikeD said:
If you bought it 3 month ago is it not with warrenty still?
It may be hardware problem and that we can't fix.
You can try factory reset, but that will erase all your settings and installed apps, contacts, messages etc, so you better have backup of everything before you try.
How did you upgrade to ICS, with PC Companion/SUS or flashtool?
Click to expand...
Click to collapse
I updated it with SUS than after the problem i downgraded it ti GB via Flashtool
---------- Post added at 08:30 AM ---------- Previous post was at 08:25 AM ----------
smartananallavan said:
It is noting to worry it is a common bug on certain stock roms and did you install or uninstall any battery saver apps or Taskmanager apps? and don't worry either flash a different stock version with flashtool please post more specific info about ur device (such as rooted or bootloader unlocked, etc)
since you are new member i assume u are just using a unrooted stock Rom with unlocked bootloader.
BUT FIRST TRY OUT A NEW STOCK OR JUST REFLASH THE SAME ROM U HAVE
Click to expand...
Click to collapse
My phone is not rooted and yeah install memory cleaner
Astro was from the begining and yeh i unlocked its bootloader by putting the code. . .
Well than how to fix the problem?
---------- Post added at 08:48 AM ---------- Previous post was at 08:30 AM ----------
smartananallavan said:
It is noting to worry it is a common bug on certain stock roms and did you install or uninstall any battery saver apps or Taskmanager apps? and don't worry either flash a different stock version with flashtool please post more specific info about ur device (such as rooted or bootloader unlocked, etc)
since you are new member i assume u are just using a unrooted stock Rom with unlocked bootloader.
BUT FIRST TRY OUT A NEW STOCK OR JUST REFLASH THE SAME ROM U HAVE
Click to expand...
Click to collapse
i have flashed GB with flashtool and ICS with flashtool but the same problem occurs after 1 or 2 days. . .
i flashed the indian roms
and about your questions i installed many apps like memory cleaner games file hider etc
and yes my phones bootloader is unlocked but it is not rooted. . .
So you flash new stock rom and the problem go away and come back after 1-2 days?
ChikeD said:
So you flash new stock rom and the problem go away and come back after 1-2 days?
Click to expand...
Click to collapse
Yes i flashed stock rom sometimes wifi works after flashing the rom for 1 or 2 days but sometimes it doesnt work at all after flashing the rom
im worried there is no 3g network in our country and thats why i need wifi
Ali409 said:
Yes i flashed stock rom sometimes wifi works after flashing the rom for 1 or 2 days but sometimes it doesnt work at all after flashing the rom
im worried there is no 3g network in our country and thats why i need wifi
Click to expand...
Click to collapse
just flash another version of rom in your device.......
sometimes even reebooting your phone will help but that is temp solution for the prob
ive tried every rom
The_Ace said:
just flash another version of rom in your device.......
sometimes even reebooting your phone will help but that is temp solution for the prob
Click to expand...
Click to collapse
hi ive tried every rom and kernel custom roms etc.
wifi works for few seconds than disconnects
it always keep connecting and disconnecting!
sometimes it connects but i cant browse or surf on net
bluetooth also turns on sometimes but sometimes it wont turn on
please help :crying:
this happens to my phone
The_Ace said:
just flash another version of rom in your device.......
sometimes even reebooting your phone will help but that is temp solution for the prob
Click to expand...
Click to collapse
my wifi connects but i cannot surf on internet niether can i sue my whatsapp nor playstore plz help :crying:
I upgraded to nitrogen os 8.0 few weeks back. all going ok but flashed firmware update few days back and continually getting signal drops. the signal does not hold for longer than few minutes then disappears and comes back while later. Every rom I have tried since suffers from the same issue.
I have tried to flash miui 8 and miui 9 but although they eventually flash they stay on bootscreen (poweredby android screen) and never load. I left it overnight on that screen and never loaded?
Any help greatly appreciated. any help of any kind :crying:
irishchris2014 said:
I upgraded to nitrogen os 8.0 few weeks back. all going ok but flashed firmware update few days back and continually getting signal drops. the signal does not hold for longer than few minutes then disappears and comes back while later. Every rom I have tried since suffers from the same issue.
I have tried to flash miui 8 and miui 9 but although they eventually flash they stay on bootscreen (poweredby android screen) and never load. I left it overnight on that screen and never loaded?
Any help greatly appreciated. any help of any kind :crying:
Click to expand...
Click to collapse
just download lazyflasher for miui flash it after you flashed miui rom.
irishchris2014 said:
I upgraded to nitrogen os 8.0 few weeks back. all going ok but flashed firmware update few days back and continually getting signal drops. the signal does not hold for longer than few minutes then disappears and comes back while later. Every rom I have tried since suffers from the same issue.
I have tried to flash miui 8 and miui 9 but although they eventually flash they stay on bootscreen (poweredby android screen) and never load. I left it overnight on that screen and never loaded?
Any help greatly appreciated. any help of any kind :crying:
Click to expand...
Click to collapse
U should flash miui using Mi flash tool or if u wanna stay on nitrogen oreo or any custom rom u should first flash the latest firmware available before flashing any rom
I have done that but unfortunately it gets stuck on boot screen. Cheers
irishchris2014 said:
I have done that but unfortunately it gets stuck on boot screen. Cheers
Click to expand...
Click to collapse
Have u tried flashing miui using flash tool?
If yes for how much time u had waited on that boot screen bcs it takes more then 15-20 minutes before it boots up
And remember to take backup of ur data before flashing
Criston said:
U should flash miui using Mi flash tool or if u wanna stay on nitrogen oreo or any custom rom u should first flash the latest firmware available before flashing any rom
Click to expand...
Click to collapse
Criston said:
Have u tried flashing miui using flash tool?
If yes for how much time u had waited on that boot screen bcs it takes more then 15-20 minutes before it boots up
And remember to take backup of ur data before flashing
Click to expand...
Click to collapse
Yes it only worked once through my flash tool. Fails now when I try. The time it did flash, I left it plugged in overnight and on boot screen but never got past the mi powered by android bootscreen
irishchris2014 said:
Yes it only worked once through my flash tool. Fails now when I try. The time it did flash, I left it plugged in overnight and on boot screen but never got past the mi powered by android bootscreen
Click to expand...
Click to collapse
I think u r not properly flashing u have to choose clean all option in Mi flash tool otherwise it won't work and before that u should backup all the important data and files from ur internal storage
Criston said:
I think u r not properly flashing u have to choose clean all option in Mi flash tool otherwise it won't work and before that u should backup all the important data and files from ur internal storage
Click to expand...
Click to collapse
I did click that option but fails on flash nearly straight away, thanks
irishchris2014 said:
I upgraded to nitrogen os 8.0 few weeks back. all going ok but flashed firmware update few days back and continually getting signal drops. the signal does not hold for longer than few minutes then disappears and comes back while later. Every rom I have tried since suffers from the same issue.
I have tried to flash miui 8 and miui 9 but although they eventually flash they stay on bootscreen (poweredby android screen) and never load. I left it overnight on that screen and never loaded?
Any help greatly appreciated. any help of any kind :crying:
Click to expand...
Click to collapse
Having the same problem of signal drops in evry single rom. Its really bad to see developers not doing anything about it. And regarding that flashing, if u flash official miui by official twrp, then it will not boot. U have to use modified twrp to flash the official firmwares.
pritamdutt said:
Having the same problem of signal drops in evry single rom. Its really bad to see developers not doing anything about it. And regarding that flashing, if u flash official miui by official twrp, then it will not boot. U have to use modified twrp to flash the official firmwares.
Click to expand...
Click to collapse
Good to see it's not just me having this issue! Have you found any solution yet? What version of twrp do you suggest? I have been using red wolf recovery
pritamdutt said:
Having the same problem of signal drops in evry single rom. Its really bad to see developers not doing anything about it. And regarding that flashing, if u flash official miui by official twrp, then it will not boot. U have to use modified twrp to flash the official firmwares.
Click to expand...
Click to collapse
Developers have nothing to do with network drops, its Xiaomi sources.
irishchris2014 said:
Good to see it's not just me having this issue! Have you found any solution yet? What version of twrp do you suggest? I have been using red wolf recovery
Click to expand...
Click to collapse
No solution till now. Getting frequent internet disconnects. The only thing which is keeping me in the custom rom is the adoptable storage , cause m using the standard variant 16gb and its internal storage sucks.
For twrp, refer here:
https://forum.xda-developers.com/redmi-note-3/how-to/guide-redmi-note-3-available-twrps-t3406708
same issues here, running LOS official with default kernel, had the same problem always. I thought it might be antenna related as I had to order a new usb daughterboard due to poor microphone, (had reception issues with a note1 in the past due to a fake usb board lacking gsm antenna) but I think this is not the case here. Always updating the latest firmware hoping that can help but so far not.