It has CWM 5.8.2.0 on it and CM10, but I could use a good primer on how to find out what bootloader it has (I see a lot of stuff about JB/ICS)? I'm new to all this stuff, so I'm still learning. What should my priorities be in cleaning this thing up and knowing where I stand?
Boot it by holding down power + volume down and you will be taken to the boot loader. The version is in the top left corner.
Don't update the bootloader on cwm though unless you want a brick. Read the threads about what works and how to do it safely and also how to move to a compatible twrp recovery.
sbdags said:
Boot it by holding down power + volume down and you will be taken to the boot loader. The version is in the top left corner.
Don't update the bootloader on cwm though unless you want a brick. Read the threads about what works and how to do it safely and also how to move to a compatible twrp recovery.
Click to expand...
Click to collapse
Thank you. My bootloader is apparently version 2.10e, US_epad-9.4.2.15-20120221" A03. I've had a hard time finding any thread that tells me how to interpret that. One thread says if on boot you still see the ASUS logo in the bottom center, then it's ICS (I see that). If it's the nVidia logo in the bottom right hand, it's JB.
I appreciate the effort you took in responding, my issue here is that I have a limited understanding of the work that was done to get the tablet to this point, so picking up things has been difficult.
If I am on ICS, there's this thread which links to a flashable rom with JB BL and TWRP. I can't imagine it's that simple.
Lockedown said:
Thank you. My bootloader is apparently version 2.10e, US_epad-9.4.2.15-20120221" A03. I've had a hard time finding any thread that tells me how to interpret that. One thread says if on boot you still see the ASUS logo in the bottom center, then it's ICS (I see that). If it's the nVidia logo in the bottom right hand, it's JB.
I appreciate the effort you took in responding, my issue here is that I have a limited understanding of the work that was done to get the tablet to this point, so picking up things has been difficult.
If I am on ICS, there's this thread which links to a flashable rom with JB BL and TWRP. I can't imagine it's that simple.
Click to expand...
Click to collapse
You have an ICS bootloader so you need to be careful. It's very easy to brick if you go to the latest bootloader on your current recovery.
That thread you linked to is for the Cyanogen Mod bootloader. Is that the ROM you are wishing to flash?
I would go to flumpster's AndroWook thread and read there and ask what recovery you should use before updating anything.
Good luck!
sbdags said:
You have an ICS bootloader so you need to be careful. It's very easy to brick if you go to the latest bootloader on your current recovery.
That thread you linked to is for the Cyanogen Mod bootloader. Is that the ROM you are wishing to flash?
I would go to flumpster's AndroWook thread and read there and ask what recovery you should use before updating anything.
Good luck!
Click to expand...
Click to collapse
After a bit of work, I got nvflash going to keep myself safe, got a couple new recoveries, and eventually Hairy Bean! Thanks!
Lockedown said:
After a bit of work, I got nvflash going to keep myself safe, got a couple new recoveries, and eventually Hairy Bean! Thanks!
Click to expand...
Click to collapse
Hey there Lockedown, just curious, but did you order the tablet from amazon and received it by FedEx? Your rom description sounds just like the tablet hat i sold through Amazon last week. :good:
MRCANNADY said:
Hey there Lockedown, just curious, but did you order the tablet from amazon and received it by FedEx? Your rom description sounds just like the tablet hat i sold through Amazon last week. :good:
Click to expand...
Click to collapse
Hah! No, no. It's been in the family for a good 15 months now.
Lockedown said:
Hah! No, no. It's been in the family for a good 15 months now.
Click to expand...
Click to collapse
lol oh ok, I was just about to say what a small world we live in :laugh:
Related
Hello I like to know if there is news from the following problem "unrecoverable error bootloader <0x00000004>." thank you
No, sorry, your Prime is dead. We don't know any way to recover from this error.
May I ask what you did to get there?
I feel like crying, I was under CyanogenMod9 but I did not like so I pressed on with an ICS official version I followed the tutorial to make change rom and voila the result. This is final or you will find a way in a long time, you think that the guarantee can work?
yaya272 said:
I feel like crying, I was under CyanogenMod9 but I did not like so I pressed on with an ICS official version I followed the tutorial to make change rom and voila the result. This is final or you will find a way in a long time, you think that the guarantee can work?
Click to expand...
Click to collapse
So you flashed a stock ASUS bloblfile. Yea this definitely bricks ylour Prime.
Currently there is no way to recover from this, only ASUS themselfs can do.
At the momemt your Prime is absolutely dead and it's pretty unlikely this will ever change.
Can you tell me what OTA the was the latest you applied BEFORE unlocking the bootloader? Were you on .15 already? Or below .15?
yes i was on 0.15
I have only hope that the guarantee works
its worth a shot but you know what Asus said will happen once you unlocked that bootloader with their tool. they have your serial number in their system as someone who unlocked. good luck! let us know how it goes.
I have not done with their tool to unlock the bootloader, so they do not have my serial number
yaya272 said:
I have not done with their tool to unlock the bootloader, so they do not have my serial number
Click to expand...
Click to collapse
Well so how did you install CWM and CM9 then?
I did it with "PrimeTime v4.5 viperMOD" and CM9 with the recovery
yaya272 said:
I did it with "PrimeTime v4.5 viperMOD" and CM9 with the recovery
Click to expand...
Click to collapse
lol vipermod uses the asus unlocker.... Next time read the thread
oh damn. I think something is it possible to put a bootloader on a Scard then start over?. I just had the technical service from Asus they told me to send them a screnshot and he would send me a list of commands to do a restore to factory
yaya272 said:
oh damn. I think something is it possible to put a bootloader on a Scard then start over?. I just had the technical service from Asus they told me to send them a screnshot and he would send me a list of commands to do a restore to factory
Click to expand...
Click to collapse
haha lol, fail @Asus support
And no you can't put a bootloader on your sdcard Your Prime is dead, forever, accept it
So I used CWM, i prefer it over TWRP. I was on a Cm10 ROM, Then I flashed to a stock Transformer Prime ROM, and now it doesn't have a cwm or any other recovery. Idk how to get back into recovery mode. I used ROM manager and tried to get CWM back, but when It reboots my tablet, it just shows the ASUS logo. I have to hold the power button on my prime to make it reboot.
Any ideas how to get into recovery mode or get into twrp?
aznflawless said:
So I used CWM, i prefer it over TWRP. I was on a Cm10 ROM, Then I flashed to a stock Transformer Prime ROM, and now it doesn't have a cwm or any other recovery. Idk how to get back into recovery mode. I used ROM manager and tried to get CWM back, but when It reboots my tablet, it just shows the ASUS logo. I have to hold the power button on my prime to make it reboot.
Any ideas how to get into recovery mode or get into twrp?
Click to expand...
Click to collapse
Not meant as a personal critisism but why in the hell does anybody ever ever ever go against every single endorsement for twrp and zero, zero zero endorsements for cwm on the prime? Can you get into fastboot?
try this http://forum.xda-developers.com/showpost.php?p=34359560&postcount=5497
whycali said:
Not meant as a personal critisism but why in the hell does anybody ever ever ever go against every single endorsement for twrp and zero, zero zero endorsements for cwm on the prime? Can you get into fastboot?
Click to expand...
Click to collapse
Mainly because my first device I rooted only used CWM to flash. So im more comfortable using cwm to flash. And yes I can go into fastboot. I just dont know how to use it at all.
aznflawless said:
Mainly because my first device I rooted only used CWM to flash. So im more comfortable using cwm to flash. And yes I can go into fastboot. I just dont know how to use it at all.
Click to expand...
Click to collapse
its pretty easy if you follow flumpsters instructions I posted above
I am thinking of adding cwm sucks on prime to my signature block
whycali said:
its pretty easy if you follow flumpsters instructions I posted above
I am thinking of adding cwm sucks on prime to my signature block
Click to expand...
Click to collapse
Just making sure before I try this later tonight or tomorrow to get twrp.
I got my prime in May and it had ICS. I unlocked and rooted when the Prime had ICS, so my ICS bootloader is unlocked. I Flashed to a Jelly Bean CM10 Nightly ROM, and later on flashed to a stock JB ROM and requirements said that you needed a JB bootloader unlocked. So is my JB unlocked?
aznflawless said:
Just making sure before I try this later tonight or tomorrow to get twrp.
I got my prime in May and it had ICS. I unlocked and rooted when the Prime had ICS, so my ICS bootloader is unlocked. I Flashed to a Jelly Bean CM10 Nightly ROM, and later on flashed to a stock JB ROM and requirements said that you needed a JB bootloader unlocked. So is my JB unlocked?
Click to expand...
Click to collapse
got mine in may too. where is the nvidia logo when you reboot? bottom center or bottom corner?
whycali said:
got mine in may too. where is the nvidia logo when you reboot? bottom center or bottom corner?
Click to expand...
Click to collapse
Bottom right corner.
aznflawless said:
Bottom right corner.
Click to expand...
Click to collapse
you are on jb bootloader
whycali said:
you are on jb bootloader
Click to expand...
Click to collapse
Cool
I feel like i've read every thread and tried everything.. hope some one can help?
The Problem:
I had a semi working JB rom and i tried to flash a new rom due to lag and stutter from the one that was on it now I cannot boot past the EEE Pad (asus/nvidia) screen - just sits here with the text on the left corner "AndroidRoot 9.4.2.28r01
The Hope:
I can access CWM, fastboot, ADB etc :silly:
The Attempt:
Almost everything i can find, erasing through fastboot, cwm, installing different roms etc. I've tried flashing a new blob from the official asus download through fastboot but i get an error when putting it through....
Any one have ideas on what it might be, is there hope? or is this money down the drain?
push
dylan.mfh said:
I feel like i've read every thread and tried everything.. hope some one can help?
The Problem:
I had a semi working JB rom and i tried to flash a new rom due to lag and stutter from the one that was on it now I cannot boot past the EEE Pad (asus/nvidia) screen - just sits here with the text on the left corner "AndroidRoot 9.4.2.28r01
The Hope:
I can access CWM, fastboot, ADB etc :silly:
The Attempt:
Almost everything i can find, erasing through fastboot, cwm, installing different roms etc. I've tried flashing a new blob from the official asus download through fastboot but i get an error when putting it through....
Any one have ideas on what it might be, is there hope? or is this money down the drain?
Click to expand...
Click to collapse
I believe you tried to flash a JB rom without the JB boot loader. If you have nvflash enabled then that's you're only recovery option. Other than that it's dead. Asus can fix it for a fee.
McJesus15 said:
I believe you tried to flash a JB rom without the JB boot loader. If you have nvflash enabled then that's you're only recovery option. Other than that it's dead. Asus can fix it for a fee.
Click to expand...
Click to collapse
He says he can access Cwm fastboot and adb so he is not dead.
I will help you when I am at my pc later.
Edit. Get me this info ready please. Power off prime. Hold down volume down and power. When the icons appear for fastboot etc look at the top left where the writing is and at the end is a long number. Does this number start with a 9 or a 10?
I am not talking about androidroot number but the one in the long line with bootloader in it.
flumpster said:
He says he can access Cwm fastboot and adb so he is not dead.
I will help you when I am at my pc later.
Edit. Get me this info ready please. Power off prime. Hold down volume down and power. When the icons appear for fastboot etc look at the top left where the writing is and at the end is a long number. Does this number start with a 9 or a 10?
I am not talking about androidroot number but the one in the long line with bootloader in it.
Click to expand...
Click to collapse
Ah my bad. Saw the Androidroot number thing and assumed it was the nvflash boot loader.
Sent from my Transformer Prime TF201 using xda app-developers app
So very sorry about the delay in a response and thank you very much for your replies!
I have attached a picture of (what i think) you are talking to. I believe what you are asking for is a 9.
Dylan
flumpster said:
He says he can access Cwm fastboot and adb so he is not dead.
I will help you when I am at my pc later.
Edit. Get me this info ready please. Power off prime. Hold down volume down and power. When the icons appear for fastboot etc look at the top left where the writing is and at the end is a long number. Does this number start with a 9 or a 10?
I am not talking about androidroot number but the one in the long line with bootloader in it.
Click to expand...
Click to collapse
Sent from my Samsung Chromebook.
dylan.mfh said:
So very sorry about the delay in a response and thank you very much for your replies!
I have attached a picture of (what i think) you are talking to. I believe what you are asking for is a 9.
Dylan.
Click to expand...
Click to collapse
You have the same problem as someone I fixed not long ago.
Please read thru the following thread and post back here if you get stuck at any point.
http://forum.xda-developers.com/showthread.php?t=2009284
flumpster said:
You have the same problem as someone I fixed not long ago.
Please read thru the following thread and post back here if you get stuck at any point.
http://forum.xda-developers.com/showthread.php?t=2009284
Click to expand...
Click to collapse
Thank you thank you thank yoououuu!!! WOW you are the best!!!!
for any one trying to figure this out, i looked up android wook 1.3 on the android dev upload site and got it through there!!
Thank you soo much! Can i donate $5 and buy you a beer?
dylan.mfh said:
Thank you thank you thank yoououuu!!! WOW you are the best!!!!
for any one trying to figure this out, i looked up android wook 1.3 on the android dev upload site and got it through there!!
Thank you soo much! Can i donate $5 and buy you a beer?
Click to expand...
Click to collapse
It's ok thanks mate, I have loads of beer
Enjoy your prime
dylan.mfh said:
So very sorry about the delay in a response and thank you very much for your replies!
I have attached a picture of (what i think) you are talking to. I believe what you are asking for is a 9.
Dylan
Sent from my Samsung Chromebook.
Click to expand...
Click to collapse
It looks like I have the exact same problem but my number starts with a 10. I would be eternally grateful if someone could help. I have searched for hours and have had not luck ;(
---------- Post added at 02:50 PM ---------- Previous post was at 02:40 PM ----------
How I did this...
I was running CM 10 with the jb bootloader and I figured I'd update before going on a trip.
I decided to try AndroWook but couldn't get it to boot. I couldn't get it to work or figure out why. When I recovered CM, no problem. So I decided to give it one more go and downloaded AndroWook 1.3 and installed as if I was updating the bootloader.
Been in ruins ever since ;(
I can get to fastboot and adb but can't boot into recovery! I tried flashing a new recovery through fastboot. I am either missing something or it is not working.
Thanks for anyone that can point me in a direction.
eyecubed said:
It looks like I have the exact same problem but my number starts with a 10. I would be eternally grateful if someone could help. I have searched for hours and have had not luck ;(
---------- Post added at 02:50 PM ---------- Previous post was at 02:40 PM ----------
How I did this...
I was running CM 10 with the jb bootloader and I figured I'd update before going on a trip.
I decided to try AndroWook but couldn't get it to boot. I couldn't get it to work or figure out why. When I recovered CM, no problem. So I decided to give it one more go and downloaded AndroWook 1.3 and installed as if I was updating the bootloader.
Been in ruins ever since ;(
I can get to fastboot and adb but can't boot into recovery! I tried flashing a new recovery through fastboot. I am either missing something or it is not working.
Thanks for anyone that can point me in a direction.
Click to expand...
Click to collapse
Just install the regular version of this http://forum.xda-developers.com/showpost.php?p=34937936&postcount=6210 . put a Jellybean rom either Androwook 1.51 or nrgz latest from the developers thread on a micro sd card. And then use this to flash a new rom. Do not forget to wipe cache, dalvik and factory reset. You can actually wipe anything EXCEPT FOR EXTERNAL SD.
whycali said:
Just install the regular version of this http://forum.xda-developers.com/showpost.php?p=34937936&postcount=6210 . put a Jellybean rom either Androwook 1.51 or nrgz latest from the developers thread on a micro sd card. And then use this to flash a new rom. Do not forget to wipe cache, dalvik and factory reset. You can actually wipe anything EXCEPT FOR EXTERNAL SD.
Click to expand...
Click to collapse
Fixed him over pm about 6 hours ago mate lol
flumpster said:
Fixed him over pm about 6 hours ago mate lol
Click to expand...
Click to collapse
um, updates are nice
Hey all,
I was flashing a new rom and ran into some issues.
I have the new rom on the SD Card, but when I go into TWRP (2.2.0) and go to install,
I can not access the SD card. It shows in the tree, but it is not showing anything on it. I have accidently removed my backup by doing a wipe on everything. Am I done and have to replace it ?
zosopage said:
Hey all,
I was flashing a new rom and ran into some issues.
I have the new rom on the SD Card, but when I go into TWRP (2.2.0) and go to install,
I can not access the SD card. It shows in the tree, but it is not showing anything on it. I have accidently removed my backup by doing a wipe on everything. Am I done and have to replace it ?
Click to expand...
Click to collapse
You should be ok at the moment but we are going to take this one step at a time.
I need to know what bootloader you are on before we progress.
Power off the machine and hold down power down and volume down the same time for about 10 seconds until the icons appear on your screen (usb icon, wipe etc) look up the top left of your screen and there will be text with a long number at the end, it will either start with a 9 or a 10. What is this number?
Also what rom do you want to put on ?
flumpster said:
You should be ok at the moment but we are going to take this one step at a time.
I need to know what bootloader you are on before we progress.
Power off the machine and hold down power down and volume down the same time for about 10 seconds until the icons appear on your screen (usb icon, wipe etc) look up the top left of your screen and there will be text with a long number at the end, it will either start with a 9 or a 10. What is this number?
Also what rom do you want to put on ?
Click to expand...
Click to collapse
I was running cm10 for a helluva long time, but was doing this energy one. states bootloader 2.10 e?
zosopage said:
I was running cm10 for a helluva long time, but was doing this energy one. states bootloader 2.10 e?
Click to expand...
Click to collapse
Hmmm that is not really what I was after.. Let's try another way as I think you will be on ICS bootloader if running an old version of CM10,
Switch on machine and tell me where the Tegra logo is. If it down the bottom center it is ICS bootloader, if it is down the bottom right it is JB bootloader.
flumpster said:
Hmmm that is not really what I was after.. Let's try another way as I think you will be on ICS bootloader if running an old version of CM10,
Switch on machine and tell me where the Tegra logo is. If it down the bottom center it is ICS bootloader, if it is down the bottom right it is JB bootloader.
Click to expand...
Click to collapse
Powered by Nvidia Tegra, bottom center
zosopage said:
Powered by Nvidia Tegra, bottom center
Click to expand...
Click to collapse
Ok, you are still on ICS bootloader.
First of all I would do the nvflash process if you haven't before. http://androidroot.mobi/t3_nvflash/ This can only be done while on ICS and once you have backed up the files created during the process you can never fully hard brick your device.
Then to get you up to the new rom.
Grab the ICS TWRP UPDATER.zip from this thread. http://forum.xda-developers.com/showpost.php?p=34477681&postcount=5705 You will extract the zip file and run the bat file and follow the onscreen instructions to flash it. You will only ever use this once and will allow you to put the Jellybean bootloader and rom onto the external SD to flash it. Never use the file again once you have flashed the Jellybean bootloader as it will brick you. You will flash a JB version of TWRP after the JB bootloader has been installed.
After that is installed you want to go to post 2 here http://forum.xda-developers.com/showthread.php?t=1674827 and follow the insructions for "Upgrade Instructions for ICS"
If you wanted to install energy rom instead of Hairybean just replace the hairybean 1.51 rom in the instructions with energy rom and do the same.
flumpster said:
Ok, you are still on ICS bootloader.
First of all I would do the nvflash process if you haven't before. http://androidroot.mobi/t3_nvflash/ This can only be done while on ICS and once you have backed up the files created during the process you can never fully hard brick your device.
Then to get you up to the new rom.
Grab the ICS TWRP UPDATER.zip from this thread. http://forum.xda-developers.com/showpost.php?p=34477681&postcount=5705 You will extract the zip file and run the bat file and follow the onscreen instructions to flash it. You will only ever use this once and will allow you to put the Jellybean bootloader and rom onto the external SD to flash it. Never use the file again once you have flashed the Jellybean bootloader as it will brick you. You will flash a JB version of TWRP after the JB bootloader has been installed.
After that is installed you want to go to post 2 here http://forum.xda-developers.com/showthread.php?t=1674827 and follow the insructions for "Upgrade Instructions for ICS"
If you wanted to install energy rom instead of Hairybean just replace the hairybean 1.51 rom in the instructions with energy rom and do the same.
Click to expand...
Click to collapse
Thanks for the help. I am trying to get into fastboot USB and the prime jst sits there. I am wondering if I don't have the drivers correct for windows XP. any idea where to get those?
zosopage said:
Thanks for the help. I am trying to get into fastboot USB and the prime jst sits there. I am wondering if I don't have the drivers correct for windows XP. any idea where to get those?
Click to expand...
Click to collapse
When you click up on the USB icon and it says entering fastboot mode and freezes that is normal. That means you are in fastboot.
Look in device manager and see if you have any exclamation marks by anything, if you do then you don't have the drivers installed.
Get them here http://forum.xda-developers.com/showthread.php?t=1426502
Thank you so very much. You saved me tremendously. The ROM is being installed right now and seems to be going fine. And as a plus, I have a pretty cool Recovery now...I was originally thinking that I was going to have to figure out how to explain to the wife that I broke my tab and was going to have to get a nexus 10...
UPDATE, ROM installned and booting right now...now to restore all my apps...
A great learning experience....
Z
zosopage said:
Thank you so very much. You saved me tremendously. The ROM is being installed right now and seems to be going fine. And as a plus, I have a pretty cool Recovery now...I was originally thinking that I was going to have to figure out how to explain to the wife that I broke my tab and was going to have to get a nexus 10...
UPDATE, ROM installned and booting right now...now to restore all my apps...
A great learning experience....
Z
Click to expand...
Click to collapse
I'm guessing you installed my custom TWRP that looks like JB
Glad you got it all sorted mate.. Enjoy
flumpster said:
I'm guessing you installed my custom TWRP that looks like JB
Glad you got it all sorted mate.. Enjoy
Click to expand...
Click to collapse
thanks... now I feel like an idiot as I installed a rom that you are not part of... now that I figured out that 2.12.12 means DEC 2, 2012.. I am going to try the one that you are connected with... thanks again!
Z
zosopage said:
thanks... now I feel like an idiot as I installed a rom that you are not part of... now that I figured out that 2.12.12 means DEC 2, 2012.. I am going to try the one that you are connected with... thanks again!
Z
Click to expand...
Click to collapse
It doesn't matter which rom you install mate. I knew you wanted to install Energy rom when you started and it makes no difference to me.
Energy and Hairybean are both great roms and both based off stock just that Hairybean looks more like stock and Energy is themed.
Try them both and find which one suits you best
Unbrick Prime
It sounds like you have some good help here and hopefully you can get through this problem.. I just wanted to drop my two cents. Good thing to remember is to be on the latest Recovery (as you mentioned TWRP, make sure its always the latest esp. when flashing JB ROM's). Also if you can't unbrick it, head over to this thread here and here where I personally had a lot of assistance unbricking my Prime from a hard brick using nvflash. Good luck.
So my friend decided to try to update my tablet and i was on Hariybean 2.31 and he installed twrp that wasn't compatible and now i cannot mount anything in the recovery and it only boots to the recovery i can still get adb from the remove menu and i can adb restart bootloader and access fast boot but every time i try to flsh anything it locks up fastboot says that i am on 10.6.1.27. anyone with any knoloege please help.
Edit:
Follow Flumpsters method below ...
the isc or the jelly bean on also i have gotten the hairbeany recover back on but i dont have permission to do anything. keeps asking for password.?
SAJdroid said:
Goto twrp download 2.5.0.0 version n flash from fast boot. Install hairy bean again by following the instructions.
Once u are able to successfully load the rom. Goto recovery n flash the downgrade bootloader which can be found at the bottom of hairy bean thread. Now you can flash any rom compatible on 4.1 bootloader.
Click to expand...
Click to collapse
Mate you have to stop telling people this. This is the second thread I have seen you say it In. Hairy bean uses the 4.2 bootloader, flashing 2.5 twrp from their site for the prime is just asking to hard brick the device.
Official twrp will not work on a 4.2 bootloader, he would not be able to do anything in it. It would have all partitions locked and he would be completely stuck and it would ask for a password.
http://forum.xda-developers.com/showpost.php?p=40149294&postcount=8
http://forum.xda-developers.com/showthread.php?t=2409602
edit.. Just in case that sounded a bit harsh it wasn't meant to. I am just trying to stop people getting in worse situations.
flumpster said:
Mate you have to stop telling people this. This is the second thread I have seen you say it In. Hairy bean uses the 4.2 bootloader, flashing 2.5 twrp from their site for the prime is just asking to hard brick the device.
Official twrp will not work on a 4.2 bootloader, he would not be able to do anything in it. It would have all partitions locked and he would be completely stuck and it would ask for a password.
http://forum.xda-developers.com/showpost.php?p=40149294&postcount=8
http://forum.xda-developers.com/showthread.php?t=2409602
edit.. Just in case that sounded a bit harsh it wasn't meant to. I am just trying to stop people getting in worse situations.
Click to expand...
Click to collapse
Flumpster you are correct mate .. sorry for the confusion .. I am editing the previous threads ...
SAJdroid said:
Flumpster you are correct mate .. sorry for the confusion .. I am editing the previous threads ...
Click to expand...
Click to collapse
Cheers. Don't stop helping over this, They need all the people they can over here helping out. Just make sure you know you are 100 percent before giving advise, I always used to test it myself first as wrong information is far worse than no information.
Keep up the good work mate. :good: