So I used CWM, i prefer it over TWRP. I was on a Cm10 ROM, Then I flashed to a stock Transformer Prime ROM, and now it doesn't have a cwm or any other recovery. Idk how to get back into recovery mode. I used ROM manager and tried to get CWM back, but when It reboots my tablet, it just shows the ASUS logo. I have to hold the power button on my prime to make it reboot.
Any ideas how to get into recovery mode or get into twrp?
aznflawless said:
So I used CWM, i prefer it over TWRP. I was on a Cm10 ROM, Then I flashed to a stock Transformer Prime ROM, and now it doesn't have a cwm or any other recovery. Idk how to get back into recovery mode. I used ROM manager and tried to get CWM back, but when It reboots my tablet, it just shows the ASUS logo. I have to hold the power button on my prime to make it reboot.
Any ideas how to get into recovery mode or get into twrp?
Click to expand...
Click to collapse
Not meant as a personal critisism but why in the hell does anybody ever ever ever go against every single endorsement for twrp and zero, zero zero endorsements for cwm on the prime? Can you get into fastboot?
try this http://forum.xda-developers.com/showpost.php?p=34359560&postcount=5497
whycali said:
Not meant as a personal critisism but why in the hell does anybody ever ever ever go against every single endorsement for twrp and zero, zero zero endorsements for cwm on the prime? Can you get into fastboot?
Click to expand...
Click to collapse
Mainly because my first device I rooted only used CWM to flash. So im more comfortable using cwm to flash. And yes I can go into fastboot. I just dont know how to use it at all.
aznflawless said:
Mainly because my first device I rooted only used CWM to flash. So im more comfortable using cwm to flash. And yes I can go into fastboot. I just dont know how to use it at all.
Click to expand...
Click to collapse
its pretty easy if you follow flumpsters instructions I posted above
I am thinking of adding cwm sucks on prime to my signature block
whycali said:
its pretty easy if you follow flumpsters instructions I posted above
I am thinking of adding cwm sucks on prime to my signature block
Click to expand...
Click to collapse
Just making sure before I try this later tonight or tomorrow to get twrp.
I got my prime in May and it had ICS. I unlocked and rooted when the Prime had ICS, so my ICS bootloader is unlocked. I Flashed to a Jelly Bean CM10 Nightly ROM, and later on flashed to a stock JB ROM and requirements said that you needed a JB bootloader unlocked. So is my JB unlocked?
aznflawless said:
Just making sure before I try this later tonight or tomorrow to get twrp.
I got my prime in May and it had ICS. I unlocked and rooted when the Prime had ICS, so my ICS bootloader is unlocked. I Flashed to a Jelly Bean CM10 Nightly ROM, and later on flashed to a stock JB ROM and requirements said that you needed a JB bootloader unlocked. So is my JB unlocked?
Click to expand...
Click to collapse
got mine in may too. where is the nvidia logo when you reboot? bottom center or bottom corner?
whycali said:
got mine in may too. where is the nvidia logo when you reboot? bottom center or bottom corner?
Click to expand...
Click to collapse
Bottom right corner.
aznflawless said:
Bottom right corner.
Click to expand...
Click to collapse
you are on jb bootloader
whycali said:
you are on jb bootloader
Click to expand...
Click to collapse
Cool
Related
Hello, i read most of the threads but i'm totally stucked.
I'm on:
stock IML74K.WW_epad-9.4.2.15-20120221
stock bootloader (locked)
rooted
CWM 5.8.3.4 installed
problems are:
i don't get OTA update notification (maybe 'cos I'm rooted)
i cannot get back to stock putting WW_epad-user-9.4.2.28.zip onmy SD card root, because update starts but at the first reboot I'm bumped into CWM instead of installing new rom.
I tried trekest (http://forum.xda-developers.com/showthread.php?t=1909820) method with no luck (I always get bumped to CWM).
I wish someone could help me! any suggestion is appreciated
THANKS IN ADVANCE
P.S. i realized that this is an ancient problem 'cos last ICS ver should be .28 and not .15 :-/
giank30 said:
Hello, i read most of the threads but i'm totally stucked.
I'm on:
stock IML74K.WW_epad-9.4.2.15-20120221
stock bootloader (locked)
rooted
CWM 5.8.3.4 installed
problems are:
i don't get OTA update notification (maybe 'cos I'm rooted)
i cannot get back to stock putting WW_epad-user-9.4.2.28.zip onmy SD card root, because update starts but at the first reboot I'm bumped into CWM instead of installing new rom.
I tried trekest (http://forum.xda-developers.com/showthread.php?t=1909820) method with no luck (I always get bumped to CWM).
I wish someone could help me! any suggestion is appreciated
THANKS IN ADVANCE
P.S. i realized that this is an ancient problem 'cos last ICS ver should be .28 and not .15 :-/
Click to expand...
Click to collapse
imho if you have cwm -> you're unlocked -> no ota
truly speaking i don't know if i'm locked or not... but running the ASUS unlock app still ask me to unlock, with the unlock warning...
so i desume i'm still locked (and perhaps this is why i cannot install any other rom), strange thing is i dont get the OTA notification...
i gusss i'm LOCKED, but supposing i'm UNLOCKED, what i can do?
giank30 said:
truly speaking i don't know if i'm locked or not... but running the ASUS unlock app still ask me to unlock, with the unlock warning...
so i desume i'm still locked (and perhaps this is why i cannot install any other rom), strange thing is i dont get the OTA notification...
i gusss i'm LOCKED, but supposing i'm UNLOCKED, what i can do?
Click to expand...
Click to collapse
Supposing that you're unlocked, head to the development section and flash a custom rom of your preference, no point settling for a stock ROM supposing that you've already voided your warranty
justcookiesncream said:
Supposing that you're unlocked, head to the development section and flash a custom rom of your preference, no point settling for a stock ROM supposing that you've already voided your warranty
Click to expand...
Click to collapse
Thank-you.
The problem is: how? as i wrote, whenever i use CWM to flash any zip it doesn't update but returns to cwm (BTW i installed the cwm via ROM MANAGER)
giank30 said:
Thank-you.
The problem is: how? as i wrote, whenever i use CWM to flash any zip it doesn't update but returns to cwm (BTW i installed the cwm via ROM MANAGER)
Click to expand...
Click to collapse
when u boot up your tablet, does it say "unlocked" on the top left corner?
strabo100 said:
when u boot up your tablet, does it say "unlocked" on the top left corner?
Click to expand...
Click to collapse
no...
just eee pad asus boot logo....
To know if you're unlocked, only boot your prime: at the boot screen, upper left side, it'written "device is unlocked".
I am unlocked, same CMR than yours, I just download the WWW zip on Asus support website, extract once the zip (once more but just to know what was inside).
And in recovery, wipe data/factory reset, and flash the zip that was inside the downloaded zip like any custom Rom.
Then reboot, and wait for installation end. (It flash the recovery again I think.)
Then JB!
Well.... Then i'm LOCKED... I dont think i can flash the update in this Way, right?
Got it... Followed the suggestion thanks
Sent from my Galaxy Nexus using xda premium
giank30 said:
Got it... Followed the suggestion thanks
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
to solve the mystery, you're unlocked?
Well, when i was on ICS nothing showed at bootstrap, but when i booted to JB it says 'unlocked device'... so NOW i guess it's UNLOCKED :-{
My system directory seems to be missing. I've installed teamwin Recovery but am unable to mount the system drive. When I install the latest Cyanogen Mod nightly it appears to install but won't boot. All I've got is Recovery and Fastboot. Help!
So, I had it booting momentarily. Once I had it going I figured I would attempt to load Clockwork Mod Recovery and give it another go. Now I can't even get to the bootloader. Please tell me this isn't bricked!
DustL82 said:
So, I had it booting momentarily. Once I had it going I figured I would attempt to load Clockwork Mod Recovery and give it another go. Now I can't even get to the bootloader. Please tell me this isn't bricked!
Click to expand...
Click to collapse
We don't have enough information. What rom was you on? When you say you had it booting momentarily to where? What Cwm did you flash and how? What happens when you hold down volume down and power together from being off?
flumpster said:
We don't have enough information. What rom was you on? When you say you had it booting momentarily to where? What Cwm did you flash and how? What happens when you hold down volume down and power together from being off?
Click to expand...
Click to collapse
Here is the whole sequence of events...
1) I was on complete stock updated to the latest Asus OTA
2) I used the Asus unlock tool to unlock the bootloader
3) I wanted to gain root access so I tried the freshroot method here http://forum.xda-developers.com/showthread.php?t=1929189. This didn't work and it made my system directory not be found via fastboot.
4) I attempted to load CW Recovery 5.8.3.4 for the TF201 but it wouldn't open so I went with TWRP 2.3.1.0 (both were loaded via fastboot)
5) Once TWRP was working I flashed stock Asus version 10.4.2.17(US) and was able to boot into the welcome screen
6) I still wanted root and I noticed that my recovery image was no longer loading so I attempted to once again push CW Recovery via fastboot.
7) At this point the tablet turns on to the Asus splash screen and in the top left says "The Device is Unlocked". Holding Power + Volume Down lands me in the same spot.
Thank you again for the help!
DustL82 said:
Here is the whole sequence of events...
1) I was on complete stock updated to the latest Asus OTA
2) I used the Asus unlock tool to unlock the bootloader
3) I wanted to gain root access so I tried the freshroot method here http://forum.xda-developers.com/showthread.php?t=1929189. This didn't work and it made my system directory not be found via fastboot.
4) I attempted to load CW Recovery 5.8.3.4 for the TF201 but it wouldn't open so I went with TWRP 2.3.1.0 (both were loaded via fastboot)
5) Once TWRP was working I flashed stock Asus version 10.4.2.17(US) and was able to boot into the welcome screen
6) I still wanted root and I noticed that my recovery image was no longer loading so I attempted to once again push CW Recovery via fastboot.
7) At this point the tablet turns on to the Asus splash screen and in the top left says "The Device is Unlocked". Holding Power + Volume Down lands me in the same spot.
Thank you again for the help!
Click to expand...
Click to collapse
I have a really bad feeling about this. Can you show me where you got that Cwm from please?
flumpster said:
I have a really bad feeling about this. Can you show me where you got that Cwm from please?
Click to expand...
Click to collapse
Yes, I downloaded the Asus Transformer Prime Recovery image from clockworkmod.com/rommanager.
DustL82 said:
Yes, I downloaded the Asus Transformer Prime Recovery image from clockworkmod.com/rommanager.
Click to expand...
Click to collapse
I really have a bad feeling about this mate. The version you mentioned earlier came out at the end of may. Jellybean didn't come out until July. I don't think they released a version since then that supports the Jellybean bootloader and if you flash an ICS recovery onto a Jellybean bootloader you will hard brick your device.
If you cannot access the icons by holding down power and volume down for about 5 seconds while you are powered off then I am afraid it is hard bricked and will have to be returned to asus and have motherboard replaced.
I know it's no conciliation but there are posts everywhere saying not to use CWM on prime
flumpster said:
I really have a bad feeling about this mate. The version you mentioned earlier came out at the end of may. Jellybean didn't come out until July. I don't think they released a version since then that supports the Jellybean bootloader and if you flash an ICS recovery onto a Jellybean bootloader you will hard brick your device.
If you cannot access the icons by holding down power and volume down for about 5 seconds while you are powered off then I am afraid it is hard bricked and will have to be returned to asus and have motherboard replaced.
I know it's no conciliation but there are posts everywhere saying not to use CWM on prime
Click to expand...
Click to collapse
Unfortunately there is at least one post out there saying it will work. On that note, know of anyone who needs some spare parts?
DustL82 said:
Unfortunately there is at least one post out there saying it will work. On that note, know of anyone who needs some spare parts?
Click to expand...
Click to collapse
It can be repaired by asus. Ask them how much to fix. If it's too much these will sell on eBay as people want them for the screen etc.
I recently bricked my asus transformer prime by formatting data, system, and cache without checking if I had a rom on my sd card. Without the option in CWM to install from a rom real sd card I tried to install TWRP and now I have no recovery and the screen hangs at Eee Pad splash screen. I still have the ability to use fastboot. If anyone can unbrick my transformer for me I will pay you.
iamnot said:
I recently bricked my asus transformer prime by formatting data, system, and cache without checking if I had a rom on my sd card. Without the option in CWM to install from a rom real sd card I tried to install TWRP and now I have no recovery and the screen hangs at Eee Pad splash screen. I still have the ability to use fastboot. If anyone can unbrick my transformer for me I will pay you.
Click to expand...
Click to collapse
Show me the money lol
Only joking, on the screen where the fastboot icon is you have a line in the top left with bootloader written in it and a long number at the end. It either starts with a 9 or a 10. What is it?
Sorry for the delay had to take one last final, I'm not sure the device has been on all since it will not turn off so I am currently charging it. I will let you know in 30 mins or so.
9.4.2.15
iamnot said:
9.4.2.15
Click to expand...
Click to collapse
Ok, you are on the ICS bootloader at the moment. The first thing we are going to do is flash a version of TWRP recovery on there which will allow you to install a rom off the external SD.
Power off the prime and put yourself into fastboot mode by holding power button and volume down the same time until a few icons appear on the screen. At this point press volume down to go over to the usb icon and then press volume up. It will look like the prime has frozen. Plug the prime into pc and make sure you have the drivers installed. If you do not please install them from here. http://forum.xda-developers.com/showthread.php?t=1426502
Next follow this post to flash ICS twrp http://forum.xda-developers.com/showpost.php?p=34477681&postcount=5705
Only use the file in that link to install it while on ICS bootloader. Later on you are going to flash hairybean 1.51 which will take you up to Jellybean Bootloader. If you use this file after that you will brick your tablet.
You should now be able to boot into recovery again.
Go to the second post here http://forum.xda-developers.com/showthread.php?t=1674827 and follow the "Upgrade Instructions for ICS"
Let me know how it goes.
Thanks for all the help my tablet is back up and running,I finishing the androwook install now.
iamnot said:
Thanks for all the help my tablet is back up and running,I finishing the androwook install now.
Click to expand...
Click to collapse
That will be 200 dollars please.. lol
Glad you're all back up and running mate.
flumpster said:
That will be 200 dollars please.. lol
Glad you're all back up and running mate.
Click to expand...
Click to collapse
the guy didn't even press thanks for ya!
This kinda happened to me. Just download the program to flash TWRP. It's somewhere in XDA. I can link you when I get home. Just put it into fastboot, and USB mode and start the program, and it will flash TWRP. Then use an SD card and put the ROM on it and flash
aznflawless said:
This kinda happened to me. Just download the program to flash TWRP. It's somewhere in XDA. I can link you when I get home. Just put it into fastboot, and USB mode and start the program, and it will flash TWRP. Then use an SD card and put the ROM on it and flash
Click to expand...
Click to collapse
Who are you speaking to? lol
PLEASE HELP ME!! My prime is stock in the first screen!!
Please i need help!! my transformer prime stock in the first screen after i use the ROM Manager to go to CWM...
Wasatronic said:
Please i need help!! my transformer prime stock in the first screen after i use the ROM Manager to go to CWM...
Click to expand...
Click to collapse
I blame rom manager for half of these bricks. It is letting people flash an ICS version of Cwm regardless of what bootloader they are on. Someone should speak to them.
Your tegra logo is in the bottom right meaning you are on the jellybean bootloader. You have flashed a ICS recovery on there and unless you have NVFlash backups or can get into fastboot then you are hard bricked.
Hey all,
I was flashing a new rom and ran into some issues.
I have the new rom on the SD Card, but when I go into TWRP (2.2.0) and go to install,
I can not access the SD card. It shows in the tree, but it is not showing anything on it. I have accidently removed my backup by doing a wipe on everything. Am I done and have to replace it ?
zosopage said:
Hey all,
I was flashing a new rom and ran into some issues.
I have the new rom on the SD Card, but when I go into TWRP (2.2.0) and go to install,
I can not access the SD card. It shows in the tree, but it is not showing anything on it. I have accidently removed my backup by doing a wipe on everything. Am I done and have to replace it ?
Click to expand...
Click to collapse
You should be ok at the moment but we are going to take this one step at a time.
I need to know what bootloader you are on before we progress.
Power off the machine and hold down power down and volume down the same time for about 10 seconds until the icons appear on your screen (usb icon, wipe etc) look up the top left of your screen and there will be text with a long number at the end, it will either start with a 9 or a 10. What is this number?
Also what rom do you want to put on ?
flumpster said:
You should be ok at the moment but we are going to take this one step at a time.
I need to know what bootloader you are on before we progress.
Power off the machine and hold down power down and volume down the same time for about 10 seconds until the icons appear on your screen (usb icon, wipe etc) look up the top left of your screen and there will be text with a long number at the end, it will either start with a 9 or a 10. What is this number?
Also what rom do you want to put on ?
Click to expand...
Click to collapse
I was running cm10 for a helluva long time, but was doing this energy one. states bootloader 2.10 e?
zosopage said:
I was running cm10 for a helluva long time, but was doing this energy one. states bootloader 2.10 e?
Click to expand...
Click to collapse
Hmmm that is not really what I was after.. Let's try another way as I think you will be on ICS bootloader if running an old version of CM10,
Switch on machine and tell me where the Tegra logo is. If it down the bottom center it is ICS bootloader, if it is down the bottom right it is JB bootloader.
flumpster said:
Hmmm that is not really what I was after.. Let's try another way as I think you will be on ICS bootloader if running an old version of CM10,
Switch on machine and tell me where the Tegra logo is. If it down the bottom center it is ICS bootloader, if it is down the bottom right it is JB bootloader.
Click to expand...
Click to collapse
Powered by Nvidia Tegra, bottom center
zosopage said:
Powered by Nvidia Tegra, bottom center
Click to expand...
Click to collapse
Ok, you are still on ICS bootloader.
First of all I would do the nvflash process if you haven't before. http://androidroot.mobi/t3_nvflash/ This can only be done while on ICS and once you have backed up the files created during the process you can never fully hard brick your device.
Then to get you up to the new rom.
Grab the ICS TWRP UPDATER.zip from this thread. http://forum.xda-developers.com/showpost.php?p=34477681&postcount=5705 You will extract the zip file and run the bat file and follow the onscreen instructions to flash it. You will only ever use this once and will allow you to put the Jellybean bootloader and rom onto the external SD to flash it. Never use the file again once you have flashed the Jellybean bootloader as it will brick you. You will flash a JB version of TWRP after the JB bootloader has been installed.
After that is installed you want to go to post 2 here http://forum.xda-developers.com/showthread.php?t=1674827 and follow the insructions for "Upgrade Instructions for ICS"
If you wanted to install energy rom instead of Hairybean just replace the hairybean 1.51 rom in the instructions with energy rom and do the same.
flumpster said:
Ok, you are still on ICS bootloader.
First of all I would do the nvflash process if you haven't before. http://androidroot.mobi/t3_nvflash/ This can only be done while on ICS and once you have backed up the files created during the process you can never fully hard brick your device.
Then to get you up to the new rom.
Grab the ICS TWRP UPDATER.zip from this thread. http://forum.xda-developers.com/showpost.php?p=34477681&postcount=5705 You will extract the zip file and run the bat file and follow the onscreen instructions to flash it. You will only ever use this once and will allow you to put the Jellybean bootloader and rom onto the external SD to flash it. Never use the file again once you have flashed the Jellybean bootloader as it will brick you. You will flash a JB version of TWRP after the JB bootloader has been installed.
After that is installed you want to go to post 2 here http://forum.xda-developers.com/showthread.php?t=1674827 and follow the insructions for "Upgrade Instructions for ICS"
If you wanted to install energy rom instead of Hairybean just replace the hairybean 1.51 rom in the instructions with energy rom and do the same.
Click to expand...
Click to collapse
Thanks for the help. I am trying to get into fastboot USB and the prime jst sits there. I am wondering if I don't have the drivers correct for windows XP. any idea where to get those?
zosopage said:
Thanks for the help. I am trying to get into fastboot USB and the prime jst sits there. I am wondering if I don't have the drivers correct for windows XP. any idea where to get those?
Click to expand...
Click to collapse
When you click up on the USB icon and it says entering fastboot mode and freezes that is normal. That means you are in fastboot.
Look in device manager and see if you have any exclamation marks by anything, if you do then you don't have the drivers installed.
Get them here http://forum.xda-developers.com/showthread.php?t=1426502
Thank you so very much. You saved me tremendously. The ROM is being installed right now and seems to be going fine. And as a plus, I have a pretty cool Recovery now...I was originally thinking that I was going to have to figure out how to explain to the wife that I broke my tab and was going to have to get a nexus 10...
UPDATE, ROM installned and booting right now...now to restore all my apps...
A great learning experience....
Z
zosopage said:
Thank you so very much. You saved me tremendously. The ROM is being installed right now and seems to be going fine. And as a plus, I have a pretty cool Recovery now...I was originally thinking that I was going to have to figure out how to explain to the wife that I broke my tab and was going to have to get a nexus 10...
UPDATE, ROM installned and booting right now...now to restore all my apps...
A great learning experience....
Z
Click to expand...
Click to collapse
I'm guessing you installed my custom TWRP that looks like JB
Glad you got it all sorted mate.. Enjoy
flumpster said:
I'm guessing you installed my custom TWRP that looks like JB
Glad you got it all sorted mate.. Enjoy
Click to expand...
Click to collapse
thanks... now I feel like an idiot as I installed a rom that you are not part of... now that I figured out that 2.12.12 means DEC 2, 2012.. I am going to try the one that you are connected with... thanks again!
Z
zosopage said:
thanks... now I feel like an idiot as I installed a rom that you are not part of... now that I figured out that 2.12.12 means DEC 2, 2012.. I am going to try the one that you are connected with... thanks again!
Z
Click to expand...
Click to collapse
It doesn't matter which rom you install mate. I knew you wanted to install Energy rom when you started and it makes no difference to me.
Energy and Hairybean are both great roms and both based off stock just that Hairybean looks more like stock and Energy is themed.
Try them both and find which one suits you best
Unbrick Prime
It sounds like you have some good help here and hopefully you can get through this problem.. I just wanted to drop my two cents. Good thing to remember is to be on the latest Recovery (as you mentioned TWRP, make sure its always the latest esp. when flashing JB ROM's). Also if you can't unbrick it, head over to this thread here and here where I personally had a lot of assistance unbricking my Prime from a hard brick using nvflash. Good luck.
It has CWM 5.8.2.0 on it and CM10, but I could use a good primer on how to find out what bootloader it has (I see a lot of stuff about JB/ICS)? I'm new to all this stuff, so I'm still learning. What should my priorities be in cleaning this thing up and knowing where I stand?
Boot it by holding down power + volume down and you will be taken to the boot loader. The version is in the top left corner.
Don't update the bootloader on cwm though unless you want a brick. Read the threads about what works and how to do it safely and also how to move to a compatible twrp recovery.
sbdags said:
Boot it by holding down power + volume down and you will be taken to the boot loader. The version is in the top left corner.
Don't update the bootloader on cwm though unless you want a brick. Read the threads about what works and how to do it safely and also how to move to a compatible twrp recovery.
Click to expand...
Click to collapse
Thank you. My bootloader is apparently version 2.10e, US_epad-9.4.2.15-20120221" A03. I've had a hard time finding any thread that tells me how to interpret that. One thread says if on boot you still see the ASUS logo in the bottom center, then it's ICS (I see that). If it's the nVidia logo in the bottom right hand, it's JB.
I appreciate the effort you took in responding, my issue here is that I have a limited understanding of the work that was done to get the tablet to this point, so picking up things has been difficult.
If I am on ICS, there's this thread which links to a flashable rom with JB BL and TWRP. I can't imagine it's that simple.
Lockedown said:
Thank you. My bootloader is apparently version 2.10e, US_epad-9.4.2.15-20120221" A03. I've had a hard time finding any thread that tells me how to interpret that. One thread says if on boot you still see the ASUS logo in the bottom center, then it's ICS (I see that). If it's the nVidia logo in the bottom right hand, it's JB.
I appreciate the effort you took in responding, my issue here is that I have a limited understanding of the work that was done to get the tablet to this point, so picking up things has been difficult.
If I am on ICS, there's this thread which links to a flashable rom with JB BL and TWRP. I can't imagine it's that simple.
Click to expand...
Click to collapse
You have an ICS bootloader so you need to be careful. It's very easy to brick if you go to the latest bootloader on your current recovery.
That thread you linked to is for the Cyanogen Mod bootloader. Is that the ROM you are wishing to flash?
I would go to flumpster's AndroWook thread and read there and ask what recovery you should use before updating anything.
Good luck!
sbdags said:
You have an ICS bootloader so you need to be careful. It's very easy to brick if you go to the latest bootloader on your current recovery.
That thread you linked to is for the Cyanogen Mod bootloader. Is that the ROM you are wishing to flash?
I would go to flumpster's AndroWook thread and read there and ask what recovery you should use before updating anything.
Good luck!
Click to expand...
Click to collapse
After a bit of work, I got nvflash going to keep myself safe, got a couple new recoveries, and eventually Hairy Bean! Thanks!
Lockedown said:
After a bit of work, I got nvflash going to keep myself safe, got a couple new recoveries, and eventually Hairy Bean! Thanks!
Click to expand...
Click to collapse
Hey there Lockedown, just curious, but did you order the tablet from amazon and received it by FedEx? Your rom description sounds just like the tablet hat i sold through Amazon last week. :good:
MRCANNADY said:
Hey there Lockedown, just curious, but did you order the tablet from amazon and received it by FedEx? Your rom description sounds just like the tablet hat i sold through Amazon last week. :good:
Click to expand...
Click to collapse
Hah! No, no. It's been in the family for a good 15 months now.
Lockedown said:
Hah! No, no. It's been in the family for a good 15 months now.
Click to expand...
Click to collapse
lol oh ok, I was just about to say what a small world we live in :laugh: