I really need serious help now
I was having GT-i9100 4.1.2 stock rooted with Siyah-s2-v6.0b4 kernel.
Today I wiped the dalvik cache, cahche partition and format data and factory reset the phone via Recovery and then when Rebooted it was just stuck on the boot screen.
I then flash with the again Stock 4.1.2 via ODIN and it failed.
Here is the log.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100OJVLS6_I9100XXLS8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Added!!
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Get PIT for mapping..
<ID:0/020> Firmware update start..
<ID:0/020> boot.bin
<ID:0/020> NAND Write Start!!
<ID:0/020> factoryfs.img
<ID:0/020> param.lfs
<ID:0/020> Sbl.bin
<ID:0/020> zImage
<ID:0/020> modem.bin
<ID:0/020> cache.img
<ID:0/020> hidden.img
<ID:0/020> __Xmit Write fail
<ID:0/020> XmitData Fail..
<ID:0/020> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help!
Please follow the rules & search before posting.
'Odin doesn't work' has been covered at least half a dozen times over the past two days in Q&A. Search for those threads, then other threads mentioned in those threads which have the set troubleshooting steps you need to try (That's assuming you want you phone fixed ?).
Edit - Pro tip: You may think your problem is urgent, everyone else here doesn't. Using 'OMGZ I borked my phone plz helpz urgently or I'll die !' type titles only makes people who might help you roll their eyes & go 'Just another impatient n00b'.
midskool said:
Please help!
Click to expand...
Click to collapse
MistahBungle said:
Please follow the rules & search before posting.
'Odin doesn't work' has been covered at least half a dozen times over the past two days in Q&A. Search for those threads, then other threads mentioned in those threads which have the set troubleshooting steps you need to try (That's assuming you want you phone fixed ?).
Edit - Pro tip: You may think your problem is urgent, everyone else here doesn't. Using 'OMGZ I borked my phone plz helpz urgently or I'll die !' type titles only makes people who might help you roll their eyes & go 'Just another impatient n00b'.
Click to expand...
Click to collapse
Thanks for the info.
will try not to post like such omgz,or I'm gonna die in future
We all are.
Sent from the little guy
Related
I'm desperated right now. I Tried to install an original 2.3.4 XWKI1 rom, but in odin, with all options right and yellow icon, the update starts but when will start the rom write appear an error and said FAIL! in red upthere.
I Tried another original rom and the same error. I don't khow what to do. Sorry for the english... i know if have other theads about this, but no one solve my problem.
When i start the phone appears: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
But the kies don't recognize the phone
ODIN ERROR:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_JDI_I9100WBKK1_I9100UHKJ1_I9100JDIKK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Sorry if i broken any rules, and HELP ME please!
What model phone have you got?
Eg: I9100
Sent from my GT-I9100 using XDA App
Yeah, GT-I9100
Maybe flashing a firmware with PIT?
with the five files. I Found this in other topic with the same issue:
"I encountered the same problem. And I was able to solved it by flashing it with xxkg6 stock firmware downloaded from sammobile.com.. The file must contain 5 files that includes the pit file. I know most of the thread advised not to touch the pit file but I just did(I took the risk). When I loaded the pit file, it automatically checked the re-partition option.. After 5mins my gs2 has born again.."
If you have Kies loaded at same time/in background close it. You cant flash via ODIN while Kies is running.
i killed all running process from kies... i'll try with a firmware with PIT and check re-partition (XXKG6)
rffslow said:
and check re-partition
Click to expand...
Click to collapse
I wouldn't do that if i were you.
peachpuff said:
I wouldn't do that if i were you.
Click to expand...
Click to collapse
why? i don't see any other solution... i don't know what to do so
I bought SGS2 GTi1900g a few weeks ago, and it came with GB 2.3.7. A day after i purchased the phone, i rooted it and installed it with ICS 4.0.3 if im not mistaken and i rooted it as well.
Just now, i decided to flash Darkyrom HD... after i read some info about it.
This is the thread link - http://forum.xda-developers.com/showthread.php?t=1544689
The Thread Title - [ROM][ICS][LPQ][ODIN+CWM] DarkyROM HD Base XXLPQ for I9100
So i guess the rom will be compatible with my SGS2 i9100g, and i flashed using Odin3. After that, i flashed the DarkyRom also using Odin...But Odin didnt fully flashed it encounted an error. Since that, i am totally ****Ed UP!! The darkyrom somehow changed my internal to emmc and everything i did to revert will end up with the same error... Error Mount /Emmc! I Tried everything... i think i've even formated my SD... OMFG i lost everything. But i dont want to lost the phone.
What can i do? How can i change the name back to how it was? I believed that is the culprit... unfinisned installation, and internal_card changed to emmc, so every other installations will failed.
Pls ... im so desperate... been doing this for hours its 6.15am already lol i aint go to work if i cant get it booted i had evrything inside it. Jees i shoudnt even bother with this rom so dangerous
PS: Now my sgs2 stucked at samsung galaxy SII start screen with black background, i can enter recovery/download mode but they are useless as i said earlier the name of internalcard has changed to emmc so is it bricked?
ricvai7 said:
I bought SGS2 GTi1900g a few weeks ago, and it came with GB 2.3.7. A day after i purchased the phone, i rooted it and installed it with ICS 4.0.3 if im not mistaken and i rooted it as well.
Just now, i decided to flash Darkyrom HD... after i read some info about it.
This is the thread link - http://forum.xda-developers.com/showthread.php?t=1544689
The Thread Title - [ROM][ICS][LPQ][ODIN+CWM] DarkyROM HD Base XXLPQ for I9100
So i guess the rom will be compatible with my SGS2 i9100g, and i flashed using Odin3. <snip!>
Click to expand...
Click to collapse
Ouch.
Darkyrom is an I9100 ROM, not an I9100G ROM. (read the thread. It says I9100. NOT I9100G.)
I9100G cannot use any I9100, I9100T, I9100P, or I9100M firmwares or ROMs due to the different hardware. (different SoC/CPU/GPU)
If you can get to download mode, try this.
wow thanks pal that was fast
I am reading that thread right now, and downloading the 339mb zip file ..almost finished btw!
I'll let you know the results.
Btw, this is the log from odin when i tried flashing ICS
Code:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLPQ_I9100GODDLP7_I9100GDDLP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> cache.img
<ID:0/011> NAND Write Start!!
<ID:0/011> factoryfs.img
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ricvai7 said:
wow thanks pal that was fast
I am reading that thread right now, and downloading the 339mb zip file ..almost finished btw!
I'll let you know the results.
Btw, this is the log from odin when i tried flashing ICS
Code:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> [B]I9100G[/B]XXLPQ_[B]I9100G[/B]ODDLP7_[B]I9100G[/B]DDLP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> cache.img
<ID:0/011> NAND Write Start!!
<ID:0/011> factoryfs.img
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Well, the good news is that you used a firmware file intended for the I9100G above. If it's still failing as above though, try:
- different USB ports on the computer (no hubs or pass-throughs)
- different USB cable
I'm assuming you for sure have drivers installed? (If you have Kies installed at all, then you should have drivers)
ctomgee said:
Ouch.
Darkyrom is an I9100 ROM, not an I9100G ROM. (read the thread. It says I9100. NOT I9100G.)
I9100G cannot use any I9100, I9100T, I9100P, or I9100M firmwares or ROMs due to the different hardware. (different SoC/CPU/GPU)
If you can get to download mode, try this.
Click to expand...
Click to collapse
Ok i followed the guide in that thread you mentioned.
The file only came with .tar.md5 file, no PIT file or bootloader/csc file.
So i 'odined' the file. Failed!
Code:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GDZKL3_I9100GDZKL3_I9100GOLCKL3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> MLO
<ID:0/011> NAND Write Start!!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Did you try different USB ports and cables, as I said you should?
Also, maybe try this.
ctomgee said:
Did you try different USB ports and cables, as I said you should?
Also, maybe try this.
Click to expand...
Click to collapse
I didn try different cables but i followed the guide you posted step by step.
I downloaded the .pit file, 'odined' it. Download the stock rom, did the same and everything running ok, odin showed the flash was completed!
The phone reboot, and installing apps (1st time boot) .. but i can see somewhere in the lines it says 'error mounting...'
Then it reboot again, voila! i got my GB booting up perfectly! Thanks a million !
That thread should have made stickied
http://forum.xda-developers.com/showthread.php?t=1448765
ricvai7 said:
I didn try different cables but i followed the guide you posted step by step.
I downloaded the .pit file, 'odined' it. Download the stock rom, did the same and everything running ok, odin showed the flash was completed!
The phone reboot, and installing apps (1st time boot) .. but i can see somewhere in the lines it says 'error mounting...'
Then it reboot again, voila! i got my GB booting up perfectly! Thanks a million !
That thread should have made stickied
http://forum.xda-developers.com/showthread.php?t=1448765
Click to expand...
Click to collapse
Glad you got sorted. Do stick to ROMs in the I9100G section from now on, eh?
Hi,
Yesterday my GT-I9100 stopped working. I was just charging it when it turned off and after that it wouldn't boot normally and got into a bootloop just displaying the Siyah boot screen.
I was using stock JB 4.1.2 with a Siyah 6.0b5 kernel and it's been running for several months now, which is why I don't really understand how I could brick the device without changing anything.
I can't get into the Recovery Mode, but the Download Mode does work.
I tried to flash the stock kernel first and then some other custom kernels (e.g. PhilZ), but Odin gets stuck at the same place every time:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-XWLSZ-OJC-5.15.9.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> zImage
<ID:0/008> NAND Write Start!!
After that I tried to flash the whole stock firmware (1 part as well as 3-part versions and different ROMs), but it still got stuck every time:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100VIALS6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> cache.img
I tried following many of the guides for soft bricked phones in the forum and as recommended in several threads, I tried using different Odin versions, rebooting my PC and so on, but nothing helped.
Instead of the Siyah bootscreen that I had at the beginning, I now have the standard screen saying 'Firmware upgrade encountered an issue....'
Has anyone experienced something like that before and is there something I can do to revive my S2?
Find Hopper8's 'Odin troubleshooting' thread. Try all the stuff in that thread over & over. That's the only way you're fixing it. Otherwise it's a service centre job. Tho I'd be surprised if you don't manage to fix it eventually, these cases are often fixed with persistence - the first 8 flashes you try fail, but for whatever reason the 9th works (as an example).
MistahBungle said:
Find Hopper8's 'Odin troubleshooting' thread. Try all the stuff in that thread over & over. That's the only way you're fixing it. Otherwise it's a service centre job. Tho I'd be surprised if you don't manage to fix it eventually, these cases are often fixed with persistence - the first 8 flashes you try fail, but for whatever reason the 9th works (as an example).
Click to expand...
Click to collapse
I've been trying that for over 6 hours now and I'm slowly starting to doubt if I can win the Odin jackpot. Since it always gets stuck when writing NAND, could there be an issue with it?
Possibly, but given the alternative (I.E you paying a not insignificant amount of money to have it fixed), if I were in your situation I'd be trying for a lot longer before declaring a stuffed NAND, unless forking out a lot of money to have it fixed isn't an issue for you.
There is no simple fix in this situation.
MistahBungle said:
Possibly, but given the alternative (I.E you paying a not insignificant amount of money to have it fixed), if I were in your situation I'd be trying for a lot longer before declaring a stuffed NAND, unless forking out a lot of money to have it fixed isn't an issue for you.
There is no simple fix in this situation.
Click to expand...
Click to collapse
Ok, I'll continue trying. Thanks for your advice. Do you think it makes sense to try flashing the same file with the same Odin version over and over or should I rather change something each time I try?
I'd be trying different stock roms (doesn't really matter which, but stay away from 4.0.4) & with different versions of Odin. Find Hopper's thread, try everything in the thread if you need to.
Hi All :fingers-crossed:
i have Galaxy SII GT-I9100G
i were flashing it with odin and had an error
<ID:0/035> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLSR_I9100GXXLSP_I9100GXEFLSR_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/035> Odin v.3 engine (ID:35)..
<ID:0/035> File analysis..
<ID:0/035> SetupConnection..
<ID:0/035> Initialzation..
<ID:0/035> Get PIT for mapping..
<ID:0/035> Firmware update start..
<ID:0/035> cache.img
<ID:0/035> NAND Write Start!!
<ID:0/035> factoryfs.img
<ID:0/035> hidden.img
<ID:0/035> MLO
<ID:0/035>
<ID:0/035> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1 )
PLEASE HELP :crying: :crying:
1) Use a proper thread title; 'Help !!!!' does not cut it. It needs to be descriptive, many people won't even look at your thread with the title you have now. Edit it.
2) Find Hopper8's 'Odin troubleshooting' thread stickied in General, and go through as many of the troubleshooting steps as many times as you need to in order to get a successful flash with Odin. However, be careful you're only flashing I9100G firmware, flashing anything else will brick your phone (like the 3 part firmware linked in Hopper's thread which can be useful in some situations, do not flash this as it's for I9100).
Do not come back to this thread and say 'But I've tried blah blah blah blah'. You are the only person who can fix your phone at this point, nobody here can do this for you. And by referring you to that thread, I've given you the tools with which you can get it done.
You're welcome.
can you please send me the thread link
i can't find it
Absolutely not.
Go to the General section, the stickied threads are near the top 'Guide - Troubleshoot a failed Odin flash'.
Keep posting to multiple threads about the same issue & you'll probably find yourself banned. Which means your phone stays busted.
Hello guys. I just made a new account for this problem. I will really really appreciate if u guys help me out, because my parents are gonna kill me if they find out my phone has a fault. So here it is.
A few weeks back i rooted my phone but then snapchat stopped working because of its new policy or something and i decided to unroot the phone. In an act of stupidity i unrooted the phone through SuperSU complete unroot and ignored all the warnings. I know im an idiot (Please help me out folks) Then my phone got stuck on bootloop. I searched it up and found solutions through ODIN and all. So thats what i did. I dowloaded the drivers and downloaded odin. Ran my phone in the downloading mode. Btw i did delete the cache through recovery mode and have already reset it as well through their and nothing happened. So back to the ODIN. I downloaded the firmware, stock one. The problem is i dont know which on to download. Thus far i have downloaded two which are, G920TUVU5EPK5_G920TTMB5EPK5_G920TUVU5EPK5_HOME.tar.md5 and G920TUVU3EPD1_G920TTMB3EPD1_G920TUVU3EPD1_HOME.tar.md5. As seen in the tutorial, i put the phone in download mode and ran odin. There at first the <ID:0/008> Added!!
was shown as soon as i connected. But when i added the PDA file, it didnt detect it and remained the same at 008. So i went ahead with the start and this is what it says,
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVU5EPK5_G920TTMB5EPK5_G920TUVU5EPK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This was the case for both the stock firmwares. PLEASE SOMEONE HELP ME OUT. I cant let my folks find out. Can any of u answer this as quickly as possible? PLEASE! IT'D be a huge help.