My optimus L9 P760 is dead, if you press power button nothing happens, but fastboot is responsiv when using omap4boot. HARD RESET does not work RECOVERY does not work.
Any ideas?
try putting it in SW mode and flashing a KDZ
and how you do that ? VolumeUp + Home + Power . 3 sec later release powerbutton? that does not work.
Unlocked bootloader? If yes you can flash cwm using omap4boot and try get to recovery and use one of the backups from thread in general.
Wysyłane z mojego LG-P760 za pomocą Tapatalk 2
How to i know if its Unlocked bootloader or not?
itvend said:
How to i know if its Unlocked bootloader or not?
Click to expand...
Click to collapse
If you dont know its probably not.
Also can you give any details about how this happened?
anirion said:
Unlocked bootloader? If yes you can flash cwm using omap4boot and try get to recovery and use one of the backups from thread in general.
Wysyłane z mojego LG-P760 za pomocą Tapatalk 2
Click to expand...
Click to collapse
If the boot loader is locked, what should I do?
saman_z1384 said:
If the boot loader is locked, what should I do?
Click to expand...
Click to collapse
Well if the bootloader is locked there isnt much you can do about it with the current state of your phone. Theres a tutorial for it but you need to have a functioning phone.
The sad part is i dont remember , i have tried few thing like B_SmartFlashTool_Extern. B_SmartFlashTool_Extern can access phone but it says Magic number does not coincide, interesting thing is that i can activate LG serial communication for 2-3 minutes and then its trops ( Vol+ then connect USB , and i have to use omap4boot, just doing Vol+ does not do enything phone just connect and disconnect usb omap4430 )
itvend said:
and how you do that ? VolumeUp + Home + Power . 3 sec later release powerbutton? that does not work.
Click to expand...
Click to collapse
No . You remove the battery, press hold vol+ plug the usb into a computer, press power, put battery back in and release vol+ when you see s/w upgrade mode
Lelus said:
No . You remove the battery, press hold vol+ plug the usb into a computer, press power, put battery back in and release vol+ when you see s/w upgrade mode
Click to expand...
Click to collapse
Nothing , no response
itvend said:
Nothing , no response
Click to expand...
Click to collapse
flash ics xloader and uboot http://forum.xda-developers.com/showthread.php?t=2292828 and try again entering s/w upgrade mode
btw SmartFlashTool doesn't work with l9s
I see on display "S/W Upgrade Please wait while upgrading" what next ?
EDIT:
Got it working on Official firmware after getting into SW mode , used offline Software update and it woke up from dead
itvend said:
I see on display "S/W Upgrade Please wait while upgrading" what next ?
EDIT:
Got it working on Official firmware after getting into SW mode , used offline Software update and it woke up from dead
Click to expand...
Click to collapse
Hello,
I also have a dead phone. Can you please tell me what you did exactly so that it woke up? I would really appreciate it!
Related
My Xperia S suddenly hard bricked yesterday night while I'm typing SMS, It's like dead...:crying::crying:
Unable to boot
Charging no light
USB not working
Can't enter fastboot mode(no light at all)
Can't enter flash mode(no light at all)
Vol up + power btn no respond
Vol up + vol down + power no respond
Vol up + power + cam btn no respond
Remove SIM card for 1 min then put it back in no respond
Sony PC Companion unable to recognize phone
Sony Update Centre unable to recognize phone
FlashTool unable to recognize phone
CMD unable to recognize phone
Basically computer cannot recognize phone
http://forum.xda-developers.com/showthread.php?t=1153310
Try this out. Its mainly made for Samsung phones, but should be working on mostly all androids.
TheSidiO said:
http://forum.xda-developers.com/showthread.php?t=1153310
Try this out. Its mainly made for Samsung phones, but should be working on mostly all androids.
Click to expand...
Click to collapse
I don't really understand how to do that, therefore can u teach me ?
Tyvm ^^
N btw, how can I enter download/Soft Brick mode on my Xperia S ?
TheSidiO said:
http://forum.xda-developers.com/showthread.php?t=1153310
Try this out. Its mainly made for Samsung phones, but should be working on mostly all androids.
Click to expand...
Click to collapse
When I run OneClickLoader.exe as admin, it just launch CMD for 1 sec
tomfan203 said:
I don't really understand how to do that, therefore can u teach me ?
Tyvm ^^
N btw, how can I enter download/Soft Brick mode on my Xperia S ?
Click to expand...
Click to collapse
Check the OP of this thread to find out how to enter download mode using the 3 button combo.
''Evil corrupts the mind of the weak but fails to feed off the mind of the strong''
KidCarter93 said:
Check the OP of this thread to find out how to enter download mode using the 3 button combo.
''Evil corrupts the mind of the weak but fails to feed off the mind of the strong''
Click to expand...
Click to collapse
All btn combo not working
tomfan203 said:
All btn combo not working
Click to expand...
Click to collapse
Did you do any of these with your device before it screwed up?
Soft bricks:
Flash improper firmware which the system recognizes as improper
Prematurely terminate transfer
Flash with a bad cable
Hard Bricks:
Flash improper bootloaders
Flash mismatched versions of proper bootloaders
Flash bootloaders with a bad cable
Click to expand...
Click to collapse
That way we'll be able to tell if it is actually a brick or not.
''Evil corrupts the mind of the weak but fails to feed off the mind of the strong''
KidCarter93 said:
Did you do any of these with your device before it screwed up?
That way we'll be able to tell if it is actually a brick or not.
''Evil corrupts the mind of the weak but fails to feed off the mind of the strong''
Click to expand...
Click to collapse
I actually using CM9 before, this afternoon after I flash Sony XSX Kernel, I reboot my Xperia S then my LT26i load all the way till the CM9 boot animation, then suddenly freezed n power off by itself, after that I unable to boot up my phone again.
Any one can help ?
Wait a sec so nothing is working???Oh man do you have any service around you or something.Because by the look of it ot is really bad.I bricked mu device several time but i was always able to get it to fastboot mode...Idk man try some service,or if there is a officially from Sony maybe they could help...
Sent from my LT26i using xda premium
tomfan203 said:
Any one can help ?
Click to expand...
Click to collapse
If you dont have waranty open the phone ... detach the battery HOLD VOLUM + and plug USB . Should see it as an " ? Device ". If it see it that is ok. Plug back the battery and use the V+ + USB to try to power it up. And try to see if you have energy in the battery.
Xperia S comes with battery inside the phone, you sure you can remove it yourself?
Sent from my LT26i using xda app-developers app
TheSidiO said:
Xperia S comes with battery inside the phone, you sure you can remove it yourself?
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
I think so, coz I used to disassemble electronics.
spinky360 said:
If you dont have waranty open the phone ... detach the battery HOLD VOLUM + and plug USB . Should see it as an " ? Device ". If it see it that is ok. Plug back the battery and use the V+ + USB to try to power it up. And try to see if you have energy in the battery.
Click to expand...
Click to collapse
I do hv warranty till next yr, but do I already vold my warranty by unlocked bootloader, flashed ROM n kernel ?
tomfan203 said:
I do hv warranty till next yr, but do I already vold my warranty by unlocked bootloader, flashed ROM n kernel ?
Click to expand...
Click to collapse
Try this:
- Connect your XS to pc using USB cable
- Press volume up + power button for 15 seconds (untill the phone vibrates 1 time)
- hold volume up, now you should be in fastboot mode.
This should work for everyone who flashes a wrong kernel
Sent from my LT26i using xda app-developers app
Depends. I dont think so. Will suggest a full power off. Plug out battery, and with the battery out hold power button to eliminate all the power from capacitors. And after I will try to start it.
Sent from my LT26i using xda app-developers app
krabappel2548 said:
Try this:
- Connect your XS to pc using USB cable
- Press volume up + power button for 15 seconds (untill the phone vibrates 1 time)
- hold volume up, now you should be in fastboot mode.
This should work for everyone who flashes a wrong kernel
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Not working...
Do you have power?
Sent from Hell using Xperia-S
when you hold power button + volume up for 10 seconds does it vibrate?
if it does vibrate or not try this:
1. charge your phone for about 1 hour (doesnt need to have a led light),
2. i guess do u have flashtool already, download any firmware for your phone.
3. since your phone is not booting, once you have the necessary files and place the firmware on the folder of flashtool, (c:flashtool/firmware/your downloaded firmware),
4. open the flashtool then click the lightning icon and choose flashmode and choose your firmware, a tab will flash and say turn off your phone then connect via flashmode (whatsoever), then connect your phone via flash mode (power button + volume down), this will not connect immediately, what will you do is to push the power button+ volume up and wait until it vibrates 3 times, then after that push the power button+volume down, then the pc will detect your phone and flash the firmware, and then wait until it finish, once finished power on your phone. ( it happens to me also that my phone does not turning on and thats what i did).
spinky360 said:
Depends. I dont think so. Will suggest a full power off. Plug out battery, and with the battery out hold power button to eliminate all the power from capacitors. And after I will try to start it.
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Just tried, not working as well...
Hi,
I was just above to flash stock rom to receive JB update,
switched my desire then not able to boot into hboot, unable to boot into os.
led is turning on while attaching usb.
please help.
vipinlahoti said:
Hi,
I was just above to flash stock rom to receive JB update,
switched my desire then not able to boot into hboot, unable to boot into os.
led is turning on while attaching usb.
please help.
Click to expand...
Click to collapse
first question, can you boot to bootloader/fastboot?
w1040 said:
first question, can you boot to bootloader/fastboot?
Click to expand...
Click to collapse
No, cant,
no bootloader just led on when attaching cable.
and PC detects as "unknown device attached"
vipinlahoti said:
No, cant,
no bootloader just led on when attaching cable.
and PC detects as "unknown device attached"
Click to expand...
Click to collapse
I think your only option is to restore it via RIFF JTAG... I don't know another way...
vipinlahoti said:
Hi,
I was just above to flash stock rom to receive JB update,
switched my desire then not able to boot into hboot, unable to boot into os.
led is turning on while attaching usb.
please help.
Click to expand...
Click to collapse
Is ur device booting in Qualcomm diagnostic mode.....?
If ur phn does then there is a possibility of flashing stock Rom
If u don't know..just Google it.....!
Sent from my ST25i using Tapatalk 2
@ OP, did you charge it?
Sent from my awesome fridge
yes, from last 2 hrs its on charging.
I donno what is RIFF JTAG and Qualcomm diagnostic mode
googling it....
If you haven't done it yet, pull out the battery, put it back in and try to get into bootloader or recovery. (the pulling out the battery part is important)
by the way, what exactly is happening when you try to boot? please describe step by step what is happening. And what do you mean by boot "into hboot"?
And how did you try to go back to stock? Did you even get into the stock rom. Didn't you just forgot to flash the boot.img when going back to stock?
DeXeS said:
If you haven't done it yet, pull out the battery, put it back in and try to get into bootloader or recovery. (the pulling out the battery part is important)
by the way, what exactly is happening when you try to boot? please describe step by step what is happening. And what do you mean by boot "into hboot"?
And how did you try to go back to stock? Did you even get into the stock rom. Didn't you just forgot to flash the boot.img when going back to stock?
Click to expand...
Click to collapse
to flash a rom I
1. Switched off my phone,
2. hold power + vol down (to boot into bootloader recovery), just blank screen no boot.
3. hold power button + vol up, again just blank screen no boot.
4. when us connected led lights up, and PC detects as "unknown device found".
not booting at all.
vipinlahoti said:
to flash a rom I
1. Switched off my phone,
2. hold power + vol down (to boot into bootloader recovery), just blank screen no boot.
3. hold power button + vol up, again just blank screen no boot.
4. when us connected led lights up, and PC detects as "unknown device found".
not booting at all.
Click to expand...
Click to collapse
but did you remove the battery and put it back in or not? If so and it still does not want to go into bootloader, it really is bricked.. Bring it to a service center for repair..
DeXeS said:
but did you remove the battery and put it back in or not? If so and it still does not want to go into bootloader, it really is bricked.. Bring it to a service center for repair..
Click to expand...
Click to collapse
Tried already but no luck,
Damn mine is rooted and bootloader not sure whether they repair or not
vipinlahoti said:
Tried already but no luck,
Damn mine is rooted and bootloader not sure whether they repair or not
Click to expand...
Click to collapse
If its hard bricked ,they wouldn't no.
..
navmad
mate maybe the screen of your phone has the problem...thats why it shows only blank...
mhb92 said:
mate maybe the screen of your phone has the problem...thats why it shows only blank...
Click to expand...
Click to collapse
That depends, if the device doesn't even shake, then it's not the screen.
Sent from my awesome fridge
Guys, I dont think having any screen problem, bcoz, no vibration during powering on, just a blank screen btw I have given to service center,
just finger crossed
So i was transfering some files to my xperia p and all of a sudden i noticed that the transfer was hold up,at that point i tried waking up my phone but it wouldnt,i tried pressing the power button,the camera button and all that are avalible but to no success.So i tried to reboot the phone via the combination of Power+Volume UP buttons,and thats it.nothing else happens.It does not respond and so i tried to remove and reinsert the battery,and then the phone lit up with the sony logo and its been there for over and hour and ahalf.
PLEASE SOMEONE HELP ME!!!
k0k0t0 said:
So i was transfering some files to my xperia p and all of a sudden i noticed that the transfer was hold up,at that point i tried waking up my phone but it wouldnt,i tried pressing the power button,the camera button and all that are avalible but to no success.So i tried to reboot the phone via the combination of Power+Volume UP buttons,and thats it.nothing else happens.It does not respond and so i tried to remove and reinsert the battery,and then the phone lit up with the sony logo and its been there for over and hour and ahalf.
PLEASE SOMEONE HELP ME!!!
Click to expand...
Click to collapse
I think u need to flash stock ROM from flashtool first
Than use this app for transfering files
http://forum.xda-developers.com/showthread.php?t=1606940
merhan94 said:
I think u need to flash stock ROM from flashtool first
Than use this app for transfering files
http://forum.xda-developers.com/showthread.php?t=1606940
Click to expand...
Click to collapse
The problem is that the phone wont respond to anything.
PS: i cant unlock the bootloader,so i cant root and im on 4.1.2
k0k0t0 said:
The problem is that the phone wont respond to anything.
PS: i cant unlock the bootloader,so i cant root and im on 4.1.2
Click to expand...
Click to collapse
Did u try hold power button and volume up until phone vibrate 3 times?
No need for bootloader unlocked or root for flash new stock rom
merhan94 said:
Did u try hold power button and volume up until phone vibrate 3 times?
No need for bootloader unlocked or root for flash new stock rom
Click to expand...
Click to collapse
As i said in the first one,i tried it,sorry for not saying about the where it vibrates 2 with an interval of about 3-4 sec,and then 3 burst vibrations!
k0k0t0 said:
As i said in the first one,i tried it,sorry for not saying about the where it vibrates 2 with an interval of about 3-4 sec,and then 3 burst vibrations!
Click to expand...
Click to collapse
I don't know how to flash stock rom without power off the device.
Sorry I can't help you
http://forum.xda-developers.com/showthread.php?t=2081876
I unbricked my phone with this guide. my phone was in a OS bootloop but it works, in your case, a Kernel Bootloop. Its a very good guide. You DO NOT need to root your phone. When flashing, instead of pressing back you press volume down. The phone should be able to enter what it is called, flash mode regardless of what problems. After flashing ALL DATA WILL BE LOST. Just follow the guide.
AndroidNoob69 said:
http://forum.xda-developers.com/showthread.php?t=2081876
I unbricked my phone with this guide. my phone was in a OS bootloop but it works, in your case, a Kernel Bootloop. Its a very good guide. You DO NOT need to root your phone. When flashing, instead of pressing back you press volume down. The phone should be able to enter what it is called, flash mode regardless of what problems. After flashing ALL DATA WILL BE LOST. Just follow the guide.
Click to expand...
Click to collapse
tried didnt work so i just sent it for the waranty!
I rooted my xperia p and tried to change the call log with honami phonebook,I added some commands in build.prop,copied another services.jar to system,after 15 mins,my phone powered off and didnt want to power on,just "SoNY" logo and then black screen,no flashboot or fastboot mode,PLEASE help me :'( is it bricked or what?
this is the thread that I followed : http://forum.xda-developers.com/xperia-u/themes-apps/mod-honami-phonebook-v2-light-black-14-t2389777
It couldnt be. try connecting phone in pc in flashmode then flash stock firmware
pjohn23 said:
It couldnt be. try connecting phone in pc in flashmode then flash stock firmware
Click to expand...
Click to collapse
phone is not detected on pc and can't start phone in fast or flashboot,the LED turns green for 1 or 2 sec than turns red then the phone start (sony logo then black screen)
Then install drivers again
Install those from flashtool\drivers folder choose the ones for xperia u,p,sola,go and last 2 optins also, thats fastboot and flash drivers.
Open flashtool and try plug phone in fastboot mode, watch the led, if it start booting remove phone and watch right down on your pc screen to see if its installing. When it finish try again.
This is 99% of these problems...
Sent from my MT27i using xda app-developers app
yes do as said on above post. it couldnt be a hard brick. AFAIK hard bricks only occur if you flash something not meant for your device. except in Z series.
matood said:
Then install drivers again
Install those from flashtool\drivers folder choose the ones for xperia u,p,sola,go and last 2 optins also, thats fastboot and flash drivers.
Open flashtool and try plug phone in fastboot mode, watch the led, if it start booting remove phone and watch right down on your pc screen to see if its installing. When it finish try again.
This is 99% of these problems...
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
Thanks for this but it's not working :/ I tried it already and I tried it after reading your answer,nothing happens. I installed the flashboot and fastboot drivers,and also xperia u,p and sola drivers,everything is good so far,but when I press volume down button and plug my phone,the LED turns green for 2 sec then red then phone starts and nothing happen,also nothing happens in the flashtool screen :/
Z.Blackbeard said:
Thanks for this but it's not working :/ I tried it already and I tried it after reading your answer,nothing happens. I installed the flashboot and fastboot drivers,and also xperia u,p and sola drivers,everything is good so far,but when I press volume down button and plug my phone,the LED turns green for 2 sec then red then phone starts and nothing happen,also nothing happens in the flashtool screen :/
Click to expand...
Click to collapse
What windows versioon do you have?
Force power off, press power + volume up untill you feel (1+) 3 vibrations and try.
Try fastboot too and see if there is anything in flashtool log.
ChikeD said:
What windows versioon do you have?
Force power off, press power + volume up untill you feel (1+) 3 vibrations and try.
Try fastboot too and see if there is anything in flashtool log.
Click to expand...
Click to collapse
I have windows 7 ultimate 64bit, this morning everything was working perfectly (fast and flashboot modes) but now nothing isi going well damn
I tried what u said to me,tried it so many times this day and nothing is working
Z.Blackbeard said:
I have windows 7 ultimate 64bit, this morning everything was working perfectly (fast and flashboot modes) but now nothing isi going well damn
I tried what u said to me,tried it so many times this day and nothing is working
Click to expand...
Click to collapse
You had fastboot/flash mode working before and now they don't?
Do you feel the 3 vibrations?
Is it charging when pluged to cahrger when off, or even with sony logo?
ChikeD said:
You had fastboot/flash mode working before and now they don't?
Do you feel the 3 vibrations?
Is it charging when pluged to cahrger when off, or even with sony logo?
Click to expand...
Click to collapse
yes they were working perfectly,yes I feel the vibration and yes my phone charges for both pc connection and charger and I think that my battery is at 100%
Z.Blackbeard said:
yes they were working perfectly,yes I feel the vibration and yes my phone charges for both pc connection and charger and I think that my battery is at 100%
Click to expand...
Click to collapse
you flashed stock firmware?
pjohn23 said:
you flashed stock firmware?
Click to expand...
Click to collapse
I don't understand?! I can't go in flashboot mode,how can I flash with stock firmware ? and does stock firmware means the factory one?
if the led is turning green it means you can. but if you dont immeadiately flash stock firmware. it will boot. so you need to prepare stock ftf firmware for your device, choose it, wait for flashtool to tell you to connect your phone in flashmode. then connect your phone in flashmode
pjohn23 said:
if the led is turning green it means you can. but if you dont immeadiately flash stock firmware. it will boot. so you need to prepare stock ftf firmware for your device, choose it, wait for flashtool to tell you to connect your phone in flashmode. then connect your phone in flashmode
Click to expand...
Click to collapse
If it doesn't show connected in flash mode in flashtool he cannot flash
Oh, how will he recover his device then? Just trying to help
pjohn23 said:
Oh, how will he recover his device then? Just trying to help
Click to expand...
Click to collapse
Yes it's a problem, but I've seen a few that have managed to fix it by disconnecting the battery.
xperia p has removable battery?
pjohn23 said:
xperia p has removable battery?
Click to expand...
Click to collapse
Nope, u need to open it and disconnect it
You dont need disconnect anything. Your phone is not bricked, its working. The only problem is your drivers, you have to manage install them and it will work. This has been here thousand times.
Sent from my MT27i using xda app-developers app
FIXED IT !! I don't know what happened during the night,but this morning I tried to boot my phone and it did respond !! then I flashed firmware and it worked like charm I was going to try the jig usb as a last hope,but It worked and you were right @matood thank you all for your support
Hi.
I managed to totally kill my PLK-L01 Honor 7 by faulty flashing.
I had firmware version 140 installed and the phones bootloader is unlocked and the phone is rooted with TWRP installed .
I wanted to upgrade to marshmallow beta img so i installed the img (called update and its a zip file which i downloaded through this site) in the external sd card, restarted in recovery twrp mode then chose the update and flashed.
Now the phone doesnt even start...no bootlogo at start and not even shwoing battery charging when connected to charger.
Its as if the screen is burnt.
The only thing that i get is is after pressing the power button and holding it for some 30 seconds, i get a little little vibration, thats it... nothing else. I tried with pc connection and without but nothing happens. PC doesnt see the phone connected,.
Any ideas?
Thx
You probably need to rollback to Lollipop... see here...
http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
mamboboy said:
Does this work?
Hard Reset:
>>> Turn off your phone.
>>> Press and hold together Volume Down + Power Button for 15 seconds.
>>> Once Recovery menu appears on the screen, release the buttons.
>>> Select "wipe data/factory reset" by using Volume buttons, and Power button to confirm.
>>> Then choose "Yes -- delete all user data".
>>> Confirm operation "reboot system now".
Click to expand...
Click to collapse
no that doesnt work coz the phone wont even start as i wrote.
Cosonic, try to charge the phone leaving it overnight then put the original firmware in sdcard, then flash it with 3 bottons. I have done it before with other honor and huawei units.
Cosonic said:
Hi.
I managed to totally kill my PLK-L01 Honor 7 by faulty flashing.
I had firmware version 140 installed and the phones bootloader is unlocked and the phone is rooted with TWRP installed .
I wanted to upgrade to marshmallow beta img so i installed the img (called update and its a zip file which i downloaded through this site) in the external sd card, restarted in recovery twrp mode then chose the update and flashed.
Now the phone doesnt even start...no bootlogo at start and not even shwoing battery charging when connected to charger.
Its as if the screen is burnt.
The only thing that i get is is after pressing the power button and holding it for some 30 seconds, i get a little little vibration, thats it... nothing else. I tried with pc connection and without but nothing happens. PC doesnt see the phone connected,.
Any ideas?
Thx
Click to expand...
Click to collapse
Hi,
Did You try to hold power button only, for long time?
In my case this done something like hard reset once.
Maybe it will help You.
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
Hi, I also ever faced this problem. When you flash an update via TWRP, it will BRICK your device. You should use stock recovery to flash a firmware update.
I also try all method to bring back my phone but it failed.
What I do is I bring my phone to SC and they give new phone 1 to 1 exchange on the spot to me.
Good luck to you.
wilu85 said:
Hi,
Did You try to hold power button only, for long time?
In my case this done something like hard reset once.
Maybe it will help You.
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
Click to expand...
Click to collapse
I did, didnt work...problem is as i said there is no life in the phone...not even the honor boot logo showing.
eabrillos said:
Cosonic, try to charge the phone leaving it overnight then put the original firmware in sdcard, then flash it with 3 bottons. I have done it before with other honor and huawei units.
Click to expand...
Click to collapse
as i said earlier it is not even charging....no bootlogo at start so there are no operations at all
@Cosonic: your phone is most likely dead. i have no idea why so many people are able to root their devices, but have not the slightest idea what that means for ota updates...
bamserl said:
@Cosonic: your phone is most likely dead. i have no idea why so many people are able to root their devices, but have not the slightest idea what that means for ota updates...
Click to expand...
Click to collapse
ye boss it is certainly dead since its not even charging the battery. i gave it to the shop for service, i doubt if they can fix it