Hi guys, first, my native language is spanish, so, be patient with me , Ill try to be clear hehe
Well, I have a Xperia U (ST25a) it had a baseband with termination in 9, but one day when I decided to install the last rom available for the ST25a i noticed that the baseband changed from EC09 to EC01 (now is P2H_EC01), so, here is my question, Can this little change do a mess with my Inernet conection? The 3G signal seems fine, and the browser works good but its IMPOSSIBLE to update or download any app from the Play Store!, I did a few things thinking that maybe was my version of Play Store but it only works when i connect it to Wi-Fi, any ideas?, Last night i installed the rom 89 (pirej debranded one) but the problem persist...could be a problem of my operator???
Jerber said:
Hi guys, first, my native language is spanish, so, be patient with me , Ill try to be clear hehe
Well, I have a Xperia U (ST25a) it had a baseband with termination in 9, but one day when I decided to install the last rom available for the ST25a i noticed that the baseband changed from EC09 to EC01 (now is P2H_EC01), so, here is my question, Can this little change do a mess with my Inernet conection? The 3G signal seems fine, and the browser works good but its IMPOSSIBLE to update or download any app from the Play Store!, I did a few things thinking that maybe was my version of Play Store but it only works when i connect it to Wi-Fi, any ideas?, Last night i installed the rom 89 (pirej debranded one) but the problem persist...could be a problem of my operator???
Click to expand...
Click to collapse
st25a and st25i have different basebands. The .89 version if am not wrong is for st25i version. So i think you have to flash st25a baseband. Take a backup and try this one http://d-h.st/ON8. Hope works. But remember to take a backup in case something goes wrong buddy.
Thanks, but i've 2 questions
1:I just have to flash by flashtool?
":How I can do a backup of my current baseband?
Thanks again
Jerber said:
Thanks, but i've 2 questions
1:I just have to flash by flashtool?
":How I can do a backup of my current baseband?
Thanks again
Click to expand...
Click to collapse
De nada!
1) No. You have to flash via cwm. Do you know how to do it?
2) Via flashtool from the rom you are currently using flash only baseband. Don't know if you can restore but i am sure you can flash baseband,
Related
I'm currently running FreeX10 B3H1, I see that B4 is out and all it apears to do is add support for the new Baseband... is there any notice improvements with the updated baseband?
I'm also not entirely sure what the baseband does
The baseband is the radio of the phone, so basically it controls your call quality, signal, mobile network, etc..
As fire why to upgrade, I can honestly say I haven't noticed any real benefits since I updated. However, as time progresses newer roms are going to be based on this version so if you want to keep flashing custom roms eventually you will have to upgrade anyway..
Hi,
I attempted to install Beta 4 last night (first time installing FreeX10). But now it is in a non stop reboot cycle and will not get any signal. It stays on for about a minute and then reboots everytime. Having read more on this I think it could be Baseband related. When I check the settings it says Baseband is unknown.
Can I upgrade my Firmware to X10a_2_1_A_0_435_GLOBAL in order to get the correct Baseband and then reinstall FreeX10? And if so, Can I use Flashtool to install X10a_2_1_A_0_435_GLOBAL without issues?
(My phone is an X10i by the way, should I use a different Firmware before re-installing FreeX10B4?)
Thanks in advance!
Dave
Daavid_1 said:
Hi,
I attempted to install Beta 4 last night (first time installing FreeX10). But now it is in a non stop reboot cycle and will not get any signal. It stays on for about a minute and then reboots everytime. Having read more on this I think it could be Baseband related. When I check the settings it says Baseband is unknown.
Can I upgrade my Firmware to X10a_2_1_A_0_435_GLOBAL in order to get the correct Baseband and then reinstall FreeX10? And if so, Can I use Flashtool to install X10a_2_1_A_0_435_GLOBAL without issues?
(My phone is an X10i by the way, should I use a different Firmware before re-installing FreeX10B4?)
Thanks in advance!
Dave
Click to expand...
Click to collapse
hey, for d "unknown baseband" problem u have to wait for d auto reboot after d 1st boot..only then d baseband and network will appear..
and for d boot loop problem-u will need to update to d .435 firmware (.52 baseband and .29 kernels)..or if u want to keep d old firmware install beta3..(beta 4 is only for .435 firmware)
happy flashing bro.
Daavid_1 said:
Hi,
I attempted to install Beta 4 last night (first time installing FreeX10). But now it is in a non stop reboot cycle and will not get any signal. It stays on for about a minute and then reboots everytime. Having read more on this I think it could be Baseband related. When I check the settings it says Baseband is unknown.
Can I upgrade my Firmware to X10a_2_1_A_0_435_GLOBAL in order to get the correct Baseband and then reinstall FreeX10? And if so, Can I use Flashtool to install X10a_2_1_A_0_435_GLOBAL without issues?
(My phone is an X10i by the way, should I use a different Firmware before re-installing FreeX10B4?)
Thanks in advance!
Dave
Click to expand...
Click to collapse
Just use this
http://forum.xda-developers.com/showthread.php?t=936733
Reflash to the new baseband , root it and install Xrecovery and proceet to install your favorite rom. I would suggest making your own with this
http://forum.xda-developers.com/showthread.php?t=938393
PS: This works with new baseband and Beta 4 rom of Z
Cheers.
Have fun flashing and creating your custom roms
srikanth.naidu said:
Just use this
http://forum.xda-developers.com/showthread.php?t=936733
Reflash to the new baseband , root it and install Xrecovery and proceet to install your favorite rom. I would suggest making your own with this
http://forum.xda-developers.com/showthread.php?t=938393
PS: This works with new baseband and Beta 4 rom of Z
Cheers.
Have fun flashing and creating your custom roms
Click to expand...
Click to collapse
I've installed this : http://forum.xda-developers.com/showthread.php?t=936462
Got .435 and baseband 2.1.54
Installed Free X10 without any problem.
You gotta make sure you update to 435 before installing freex10 beta 4 to get all benefits...
ratmkicksass said:
You gotta make sure you update to 435 before installing freex10 beta 4 to get all benefits...
Click to expand...
Click to collapse
no you don't...
flashing just the kernel and the baseband through flashtool has the EXACT same effect...
I have no problem with using the flashtool, downloading the sin file, etc. But the step that says DO NOT let it boot and immediately go into xrecovery is what worries me. I love trying all the new ROMs, but am still always go back to a custom 2.1 because of the cam/videocam, plus no stereo bluetooth dropouts.
My question is, after I do this to update the baseband and flash 2.2 Beta 4 via xrecovery. Can I go back to my old custom 2.1 with older baseband via xrecovery and then switch back and forth via xrecovery afterward? I just don't feel like flashing the entire firmware, rooting, adding JIT v2, then removing all of the SE apps AGAIN for like the 10th time.
u can install any rom on .435 firmware..
u cant install beta 4 on any lower firmware(.24,etc)..
so update to .435 and stay..
happy flashing
sumeshd said:
u can install any rom on .435 firmware..
u cant install beta 4 on any lower firmware(.24,etc)..
so update to .435 and stay..
happy flashing
Click to expand...
Click to collapse
Im not entirely sure thats true because it seemed that those with the newer baseband seemed to be having issues with other roms prior to z's beta 4... can someone confirm?
Sent from my X10i using XDA App
its mentioned clearly in z's post about using the latest base band. as for Steve's recommendation of not letting it boot, i guess i must have missed it when i upgraded the base band while on 2.1 customised, but the only worst thing that happened was i didn't got any signal on my phone, everything else worked fine, it didn't mattered coz i was to install free x10 v4. and its a fine job done by z. the ROM is great. add green glow theme on it, and nothing's like it.
about xrecovery backup able to change your base band back with restore, i haven't tried it myself, i guess xrecovery devs will be the best guys to check if you're not sure.
Sent from my X10i using Tapatalk
Recently i flashed few roms i tried many to check which one suits me best.I finnaly found the one tha suits me and its cynm 7 i am pretty sure now i cant make Mobile Internet working at all while wi fi,and other seevices work correctly could it be due baseband? I am using .58 baseband. Any help is appriciated ;-) ty
Sent from my X10i using XDA App
I had a similar problem when reflashing an official firmware after I had used FreeX10 beta 4, I finally got my browser working again by flashing a generic 2.0.A.0.504 firmware and not updating. The baseband I have now is 2.0.46 as opposed to 2.1.54. It might be the problem but I'm in no position to say so, I only know from my experience that this solved my connection issue.
I haven't flashed another firmware over it but I'm a little bit hesitant to do so at this point. I'd rather have internet access then a newer firmware.
There is one problem i can't find that firmware anymore or link has expires or so on :/ i flashed baseband .58 and i have got my web working very well :/ so i dunno might check and reflash everything again Thanks anyway!
I've had the same problem. It's most probably due to the APN not being set up. Go to your providers website, and find APN configurations. Then go to the APN settings in the wirelles & connection settings. Create a new APN using the settings on your provider's website
I know settings my self allready it worked on previous roms... but from now on it just cant work on any rom dunno why :/
I agree, it could be a baseband mismatch. Certain roms need certain basebands (I know for example that TripNRaVeR's need bb 2.0.49 or 2.0.52, but FreeX10 (that I used to use) needs 2.1.54 or 2.1.55.
What you might wanna do is check out the Baseband Collectionhttp://forum.xda-developers.com/showthread.php?t=960527, grab them all, and try them, one at a time, until you get a match.
Don't forget to back up your phone - I didn't, and lost all my sms messages (bad me).
Read the ROM thread. CM7 is Gingerbread, all GB ROMs currently available use 49/52 BB. Dont just try them all, just use the one the instructions say.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
CM7 doesn't require a baseband 58.... Try flashing some other baseband like 2.1.54
Nope :-( still none works :/ damn!
Hi, my new X10 Up to 2.3 then I met this strange disease, who knows his help only slightly:
- Affter Up to fw 2.3.3 stock, Xperia X10 always crashes and reboots when using GoogleMaps with 3G, whereas before when in FW 2.1 does not have this phenomenon.
- Tried a few RomCook WB, TW ... similar problems also
please people help me!
cunhetkhe said:
Hi, my new X10 Up to 2.3 then I met this strange disease, who knows his help only slightly:
- Affter Up to fw 2.3.3 stock whenever it uses GoogleMaps with 3G were Reboot, whereas before when in FW 2.1 does not have this phenomenon.
- Tried a few RomCook WB, TW ... similar problems also
please people help me!
Click to expand...
Click to collapse
Hi, welcome to XDA developers!
I'll try and help as much as possible...
Which kernel are you on? Stock or some custom kernel?
Thank you, I use Stock Rom, I thing it's Stock kernel. I tried to test many of the original Rom but the situation has not improved.
Another problem is that after many tests, I found only when using GoogleMaps with 3G, the machine I was reboot, if used with wifi is fine. So is 3G is the problem? but I still surf the Web using 3G normally without any problems. Hope your help!
cunhetkhe said:
Another problem is that after many tests, I found only when using GoogleMaps with 3G, the machine I was reboot, if used with wifi is fine. So is 3G is the problem? but I still surf the Web using 3G normally without any problems. Hope your help!
Click to expand...
Click to collapse
Hi, it might be baseband problem, maybe baseband .71 isn't for you... Try this:
9Lukas5 said:
- Baseband 2.1.67
- smsBB67 patch
- Kernel upgrade
flashing procedure:
-The baseband and the kernel upgrade must be placed in the firmwares folder from flashtool and the sms patch on to the sdcard.
-After you have flashed the rom and the xrecovery now also flash the sms patch before remove the battery.
-In Flashtool flash first the 2.1.67 Baseband, after flashing finished, remove usb cable and select the kernel upgrade and connect the usb again when flashtool asks.
-After both (bb and kernel upgrade) flashed, you can remove the usb-cable and power on the device with everything working on bb 2.1.67.
Regards,
L[/COLOR]
Click to expand...
Click to collapse
I haven't tried this yet, if it doesn't work let me know.
Prodigy said:
Hi, it might be baseband problem, maybe baseband .71 isn't for you... Try this:
I haven't tried this yet, if it doesn't work let me know.
Click to expand...
Click to collapse
Many thanks to you, I will try to follow your instructions and will report results
"smsBB67 patch" installed by Xrecovery ?
cunhetkhe said:
"smsBB67 patch" installed by Xrecovery ?
Click to expand...
Click to collapse
Yep now flash bb67 via flashtool.
After that you will need to flash Kernel UpGrade.
If you need help with flashtool you can ref here:
http://forum.xda-developers.com/showthread.php?t=928343
Sent from my X10i using Tapatalk
I have followed your instructions and now my phone has Baseband67 but it still reboot when I use Gmaps with 3G.
You have no other way to fix this problem? please help me
Hi bro, sorry I'm afraid i got no other method to work... you'll might have to use 2.1 firmware ...
Sorry, can't help you
Anyway, enjoy your stay at xda and hope you find a workaround soon.
Anyway thank you also, hope to have another bro in the forum will find a way to fix this condition.
Prodigy said:
Hi, it might be baseband problem, maybe baseband .71 isn't for you... Try this:
I haven't tried this yet, if it doesn't work let me know.
Click to expand...
Click to collapse
My phone is X10a, I've flash the rom 2.3 of X10a and then I flash baseband .67 as your guide and was successful, I have cured this disease. My X10 was running fine. Thank you again. (earlier I just flash the Rom 2.3 of X10i )
Hi everyone!
I'm tired using custom roms for their instability and fc's everywhere for over a year I didnt found Rom that works perfect all the time with many apps installed so I just want to my phone work, dont want to flash new system every month again.
I was running stock with deleted apps, Set Cpu (tnx to gregbradley (edit: that was neoxx3m very good advidce, sorry my bad) and z-kernel for about 4 months and I was happy, that was one and only Rom that i've used so long. Yes it wasnt so fast but it was very stable and everything works so nice not even one fc. (kindda wierd couse ive installed z-kerner on my Unlocked BL x10 and now I can't and dont wanna to play and relock)
So i wanna repair my phone and get back to stock, root it, delete all uneeded apps and flash the most stable kernel so will it be failsafe from doom right?
And the question is will my plan work? I know that phone will not be so fast but will everything work and this is all I need or maybe someone has better idea?
Also have some questions about the newest fw for this Doom UB kernel. Where do i get this newest se fw?
Any help will be very appriciated.
Restore the phone back to stock using SEUS. That should do the trick
Sent from my X10i using xda premium
Last few ROMS Ive installed from scratch. So repair, root, etc I've even format sd card everythime i flash new rom. The question is:
Will doomkernel work on stock rom repaired in pc companion?
Will it be stable?
DoomKernel is stable on stock unlocked BL, but u have few version. X, S and one more i think. Look at his thread an try it.
Sent from my "z10i"
Have to try but Doom writes thet this kernel is for NEWEST SE FIRMWARE, will it work on stock just repaired in pc companion?
Someone made the topic that He was tring to flash this newest firmware (3.x.x.x) and ended with no boot and anything could help him
I was running stock with deleted apps, Set Cpu (tnx to gregbradley advidce) (...) and I was happy,
Click to expand...
Click to collapse
Of course that was your your advice neoxx3m sorry
netox187 said:
Have to try but Doom writes thet this kernel is for NEWEST SE FIRMWARE, will it work on stock just repaired in pc companion?
Click to expand...
Click to collapse
It will work because when u repair ur phone via PCC u get latest firmware (2.3.3/3.x.x.x.x.x), but my advice is to try relock BL and use zKernel, i did that yesterday and i'm happy again!
Sent from my "z10i"
I told you that dont wanna play with bootloader no more, maybe for some time i would like to try some kernel or rom (if im not happy for using stock and doom) and will have to unlock again so im patience (tring to) and will not to this for a while.
Anyway strange is that i flash zKernel even if i had unlocked Bootloader and it work fine but when i tried to do this again ( didnt know that this kernel is fo Locked only) it didnt work