Related
This morning I wanted to install a new rom and for some stupid reason, I forgot my phone was a Vibrant and not a I9000.
The rom installed just fine using Clockwork but once booted into recovery mode, I am unable to use the power button as the select button. Also, the volume up and volume down buttons are reversed. I am guessing that the I9000 has a home button that my phone does not.
Question is this: Is there anyway to get OUT of recovery mode? I tried to connect using adb but my computer could not find the device.
Am I royally fcked?
Don't listen to the guys on top...everyone makes mistakes..try going into download mode and flashing "Eugene's froyo that does not brick". After that flash jacs nandroid backup. I would post links but I'm on my phone....you can find the links in the vibrant bible (its one of the stickys in this forum)
Instructions to get into download mode:
Turn phone off
Take out battery
Put battery in
Hold volume up and down and then insert USB cable.
This should take you to download mode.
Then flash the roms listed above in that order through odin (also found in the Bible). Hope this helps...
Sent from my SGH-T959 using XDA App
Do as he said above, but also make sure you have odin opened up before plugging in usb to the phone, and make sure you have all the drivers for the phone installed. I fought with odin for about two hours my first time before I finally realized I had to have odin opened first.
Sent from my SGH-T959 using XDA App
Thank you guys so much. Not only does it work but now Froyo is installed!
Like jtc442 stated, Odin must be started before anything will work.
As an aside: The up and down volume buttons are reversed and the splash screen is stuck with I9000. Not a big deal, something to remind me which roms not to use.
stefan.buddle said:
PS, Even if we were to give you directions to possible rectify this problem, you most likely couldnt follow it to save your life
Click to expand...
Click to collapse
Still Alive...
zednaught said:
Thank you guys so much. Not only does it work but now Froyo is installed!
Like jtc442 stated, Odin must be started before anything will work.
As an aside: The up and down volume buttons are reversed and the splash screen is stuck with I9000. Not a big deal, something to remind me which roms not to use.
Still Alive...
Click to expand...
Click to collapse
Well done dude! Mistakes happen, glad you sorted yours out. Those are pretty normal things in froyo as far as i know so its not a ROM issue. If you want a really good ROM I would recommend Bionix ROM, its currently the top dog of Vibrant ROMs
zednaught said:
Thank you guys so much. Not only does it work but now Froyo is installed!
Like jtc442 stated, Odin must be started before anything will work.
As an aside: The up and down volume buttons are reversed and the splash screen is stuck with I9000. Not a big deal, something to remind me which roms not to use.
Still Alive...
Click to expand...
Click to collapse
glad you got it back working. you should be able to get the buttons working right by flashing another rom, like bionix, or some of the other great roms in the forum.
You also could have used adb to reboot it.
Sent from my SGH-T959 using XDA App
Chalup said:
You also could have used adb to reboot it.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I did give adb a try. The command prompt just sat there with a blinking cursor.
jtc442 said:
glad you got it back working. you should be able to get the buttons working right by flashing another rom, like bionix, or some of the other great roms in the forum.
Click to expand...
Click to collapse
Yeah i will give that a try. Im guessing roms only replace certain components?
zednaught said:
I did give adb a try. The command prompt just sat there with a blinking cursor.
Yeah i will give that a try. Im guessing roms only replace certain components?
Click to expand...
Click to collapse
can you not use odin and install everything to get it back to factory settings? using the correct pit and tar files? then start fresh? download the all in one zip, and start fresh.
There is a known issue with non-Vibrant froyo ROM's with the reversed buttons, and 3.5 mm jack. As far as the recovery is concerned, I think either home or back button should serve as a select button (on the original Galaxy it is the large home button).
Hey folks. Just had a similar case (all fixed now though ). In my case, I went from stock JI6 to the Vibrant Hybrid R3 ROM, and was stuck at the Vibrant screen for about half an hour. Decided to ODIN back to JI6, which made it stuck at recovery. Fixed that by using ODIN to go back to 2.1 July stock and then back to JI6. What is it that caused the two soft-bricks in the first case? (For the record, I followed instructions to the letter) Just wondering.
EDIT: I suspect I misinterpreted the term "stock." I assumed stock meant a T-Mobile ROM, not specifically the ROM that shipped with the phone. Was that the issue in the above incident?
jtc442 said:
can you not use odin and install everything to get it back to factory settings? using the correct pit and tar files? then start fresh? download the all in one zip, and start fresh.
Click to expand...
Click to collapse
In many cases no, but maybe in this exact one... If not you will get stuck after the "galaxy s" screen with a black screen and uplights on the four capacitive buttons...
Thread cleaned. Please either help the OP, or don't post. Simple as that folks. Don't flame
please help me ! i did the same thing. i accidentally flashed the i9000 rom instead of the vibrant one. im stuck in recover mode ! the up &down buttons are reversed and none of my keys work as the "OK" key so i cant press enter. i tried to go into download mode but every time i try it just goes to recovery again and nothing is working. please help !
Hello!
I've recently flashed the ICS OS onto my galaxy s2. However it seems to be a UK version as I cannot agree to the software update agreement along with the time won't update automatically. It seems to be a little glitchy on my phone as well...
Is there anyway I can revert back to the old gingerbread?
Thanks,
Yes its buggy, its an alpha and not really daily driver quality
How to get back to gingerbread: see here
Ya I've tried that link, I went to the link for files under the BELL (Canada) network. And there aren't any .tar files in the downloader. It's cache, factoryfs, and modem then zImage. When I flashed ICS there were .tars.
Any more ideas?
Morphinated said:
Ya I've tried that link, I went to the link for files under the BELL (Canada) network. And there aren't any .tar files in the downloader. It's cache, factoryfs, and modem then zImage. When I flashed ICS there were .tars.
Any more ideas?
Click to expand...
Click to collapse
*sigh* Download the bell firmware, its a .exe, after you run it, it will extract into a .tar
To quote the thread "If the package only contains one .tar archive then it will have everything, pda+phone+csc, in the one file."
Just shove it into "PDA".
Pleases read the thread.. and flash the bootloaders first, then flash the rom.
Thank you very much. <3
Gotta love noobs....
So saying though, I've reflashed the older bootloader firmware on mine and I'll be stuffed if I can get past a bootloop....
Flashed the KP8 firmware on to test but wanted to go back to older rom...
Tried my stock rom, a few other stock roms and finally went back to KP8..
It was the only one that worked...
Will play around as time permits but doing backshift can REALLY knock you about..
ultramag69 said:
Gotta love noobs....
So saying though, I've reflashed the older bootloader firmware on mine and I'll be stuffed if I can get past a bootloop....
Flashed the KP8 firmware on to test but wanted to go back to older rom...
Tried my stock rom, a few other stock roms and finally went back to KP8..
It was the only one that worked...
Will play around as time permits but doing backshift can REALLY knock you about..
Click to expand...
Click to collapse
Yeh, I know right, im in a bored/good mood so I have patience!
I know that one, worked a double then a nightshift once, I was dead to the world.
I recognise your avatar, did you ever have a HTC hermies, or a blueangle?
As far as the getting back to GB, you should be fine doing;
1) Odin flash old bootloaders
2) Odin flash firmware
Can you get into CWM recovery? Maybe flash something via zip, white cache/data/etc?
Otherwises thats just weird, I have seen peoples phones do weird things after flashing the ICS leaks, like someones refusing to run CM7, even after flashing back old bootloaders and double flashing the CM7 zip.
Im staying away myself, for the time being, however tempted I am
Yep, Hermies it was.....
As I say, I'll kick this puppy hard and make it do what I want or destroy it in the process... Don't like not being able to do as I want... Got a whole heap of roms to flash using cwm and thanks to chainfire I have a kernel that is rooted and has cwm.
Good idea not to try just yet, could be a harsh learning curve..
For reference, I have a chinese made international sgsII with original firmware XWKG1, might be model specific but who knows....
Take out your exteral sd and make sure you flash your old modem back.
ultramag69 said:
Yep, Hermies it was.....
As I say, I'll kick this puppy hard and make it do what I want or destroy it in the process... Don't like not being able to do as I want... Got a whole heap of roms to flash using cwm and thanks to chainfire I have a kernel that is rooted and has cwm.
Good idea not to try just yet, could be a harsh learning curve..
For reference, I have a chinese made international sgsII with original firmware XWKG1, might be model specific but who knows....
Click to expand...
Click to collapse
These uppity electronic devices, cant let them get the better of us!
I am sure there will be some combo of flashes and hand waving that will give it a good kick in the head.
As long as its a i9100 it shouldn't make a difference, still weird though.
Ok, fixed it good...
You need to flash with ODIN 6 times...
!st I flashed stock rom, I had a full screen of red error messages, ignore them. I then flashed cf-root over the top. I got into recovery by holding down up volume, home button and power until sgs logo appeared then released power. Held in other buttons until recovery menu appeared...
I then cleared cache, dalvik cache and then went into mounts and formatted everything (remove your sd card or it will be wiped too).
Flash stock with Odin a second time, the cf-root a 2nd time. Repeat above steps but also in advanced fix permissions.... Also do a full wipe of data..
Flash with ODIN a 3rd time, 1st stock then cf-root... You should be back up and running... Now flash away with whatever rom you please and leave KP8 alone until its easier to fix...
Sorry if this doesn't make a lot of sense and its possible I did a few steps more than I needed but I just got home after a lovely night at work and REALLY need sleep...
Cheers, hope this helps....
Thats just mental, glad you got it working though
veyka said:
These uppity electronic devices, cant let them get the better of us!
I am sure there will be some combo of flashes and hand waving that will give it a good kick in the head.
As long as its a i9100 it shouldn't make a difference, still weird though.
Click to expand...
Click to collapse
guys i need some help .. i flashed 4.0.3 on my SGS2 ..as we know the rom is quite buggy so i tried going back to 2.3.6. Here is what happens..
I flashed stock GB using odin .. phone boots but takes me to the 'emergency dial' screen with a finger constantly telling me to touch the android... at the same time i'm getting thousands of FC messages.
I've tried restoring backups of my GB rom, the one i was using before flashing ICS but all the backups fail..saying 'system.img' file not found
I've tried flashing 2 differnet roms using odin but the same happens. .. i'm forced to only flash the laggy buggy ICS rom but i want to go back to GB
A step by step guide will be much appreciated.
Thanks
shehadl said:
guys i need some help .. i flashed 4.0.3 on my SGS2 ..as we know the rom is quite buggy so i tried going back to 2.3.6. Here is what happens..
I flashed stock GB using odin .. phone boots but takes me to the 'emergency dial' screen with a finger constantly telling me to touch the android... at the same time i'm getting thousands of FC messages.
I've tried restoring backups of my GB rom, the one i was using before flashing ICS but all the backups fail..saying 'system.img' file not found
I've tried flashing 2 differnet roms using odin but the same happens. .. i'm forced to only flash the laggy buggy ICS rom but i want to go back to GB
A step by step guide will be much appreciated.
Thanks
Click to expand...
Click to collapse
See this post: clickme
veyka said:
See this post: clickme
Click to expand...
Click to collapse
I think my situation has worsened now.. i flashed the old bootloaders using ezodin and it got stuck at 'setting up connection' .. now any file that i flash using odin gets stuck at the same and doesnt go beyond. trying recovery says 'error encountered while upgrading firmware' try recovery mode in kies.
what do i do now?
shehadl said:
I think my situation has worsened now.. i flashed the old bootloaders using ezodin and it got stuck at 'setting up connection' .. now any file that i flash using odin gets stuck at the same and doesnt go beyond. trying recovery says 'error encountered while upgrading firmware' try recovery mode in kies.
what do i do now?
Click to expand...
Click to collapse
<removed link to something you shouldnt use>
Thats for i9000, I dont know if it will work with i9100, and may have bricked your phone.
Should have just used standard odin
Can you get into download mode?
Do you have a backup of the stock or another rom that you can then revert back to stock from?
Just curious as to what the issue is, ICS is running fine for me, only issue is the video codecs which I knew about. Maybe a reflash would help if its glitchy?
veyka said:
Oh dear, did you use this: clickme?
Thats for i9000, I dont know if it will work with i9100, and may have bricked your phone.
Should have just used standard odin
Can you get into download mode?
Click to expand...
Click to collapse
OMG...How could you give him that link? Now he has a serious problem...
i got myself back into ics using odin.. then i flashed old bootloaders.. and flashed stock GB again...result is still the same.. takes me into that emergency call screen with many FCs..
how do i go about it now....
I wouldnt want to change back if the battery wasnt so bad with ics and the number of times it hangs my phone was less ...
---------- Post added at 10:32 PM ---------- Previous post was at 10:26 PM ----------
i guess what i need is correct bootloaders for i9001. any ideas where i can find those?
Lennyz1988 said:
OMG...How could you give him that link? Now he has a serious problem...
Click to expand...
Click to collapse
I didnt give him that, he said he used ezodin and that was what I found when i looked for ezodin, I was asking if he used it Thankfully he didnt.
shehadl said:
i got myself back into ics using odin.. then i flashed old bootloaders.. and flashed stock GB again...result is still the same.. takes me into that emergency call screen with many FCs..
how do i go about it now....
I wouldnt want to change back if the battery wasnt so bad with ics and the number of times it hangs my phone was less ...
---------- Post added at 10:32 PM ---------- Previous post was at 10:26 PM ----------
i guess what i need is correct bootloaders for i9001. any ideas where i can find those?
Click to expand...
Click to collapse
Ok, so you have bootloader from gingerbread back on your phone?
If you had flashed i9000 bootloaders onto your i9100 you would have bricked, you haven't, we are all good.
Now you just need to fix the FC'ing, what stock rom are you flashing?
I Downloaded and installed the ICS update last night and have been living in hell since. It doesn't have the soft buttons it is supposed to, so navigating through everything is an absolute nightmare! I want to go back to my standard rooted phone. But I have followed MANY, MANY guides, and it will not work. I have downloaded 10 different ROMS and FIRMWARES today and Flashed OVER AND OVER. I am completely stuck and NEED help please.
I have used Recovery to try and install new Roms, Used Odin as well, and I get problems EVERY time. It will reboot, load, and as soon as the "Touch the Android to Begin" logo comes up, It starts having process failures popping up over and over, preventing me from being able to do anything. Forcing me to reflash to ICS again.
Can someone please explain the process to take it back to stock so I can re-root it?
Did you wipe everything when you installed the roms? Data, cache, Dalvik?
Find stock roms here for odin:
http://forum.xda-developers.com/showthread.php?t=1075278
Just make sure to download and install the correct rom depending on which SGSII you have.
xfile102 said:
I Downloaded and installed the ICS update last night and have been living in hell since. It doesn't have the soft buttons it is supposed to, so navigating through everything is an absolute nightmare! I want to go back to my standard rooted phone. But I have followed MANY, MANY guides, and it will not work. I have downloaded 10 different ROMS and FIRMWARES today and Flashed OVER AND OVER. I am completely stuck and NEED help please.
I have used Recovery to try and install new Roms, Used Odin as well, and I get problems EVERY time. It will reboot, load, and as soon as the "Touch the Android to Begin" logo comes up, It starts having process failures popping up over and over, preventing me from being able to do anything. Forcing me to reflash to ICS again.
Can someone please explain the process to take it back to stock so I can re-root it?
Click to expand...
Click to collapse
first install stock rom from this link
http://forum.xda-developers.com/showthread.php?t=1075278
then download this rom (i think this is best ICS Rom) and install it with CMW(you should copy the rom inside your internal SD) then full wipe your phone and install rom .
http://forum.xda-developers.com/showthread.php?t=1451346
it isn't hard to push thanks button
All you need to do, if having FCs is perform a factory reset (via recovery)...
Sent from my GT-I9100 using Tapatalk
xfile102 said:
I Downloaded and installed the ICS update last night and have been living in hell since. It doesn't have the soft buttons it is supposed to, so navigating through everything is an absolute nightmare! I want to go back to my standard rooted phone. But I have followed MANY, MANY guides, and it will not work. I have downloaded 10 different ROMS and FIRMWARES today and Flashed OVER AND OVER. I am completely stuck and NEED help please.
I have used Recovery to try and install new Roms, Used Odin as well, and I get problems EVERY time. It will reboot, load, and as soon as the "Touch the Android to Begin" logo comes up, It starts having process failures popping up over and over, preventing me from being able to do anything. Forcing me to reflash to ICS again.
Can someone please explain the process to take it back to stock so I can re-root it?
Click to expand...
Click to collapse
Why don't people search...?
http://forum.xda-developers.com/showthread.php?t=1449771
Kaze105 said:
Did you wipe everything when you installed the roms? Data, cache, Dalvik?
Find stock roms here for odin:
http://forum.xda-developers.com/showthread.php?t=1075278
Just make sure to download and install the correct rom depending on which SGSII you have.
Click to expand...
Click to collapse
@Kaze & @Medhi, I went to the Link you provide above, which is INCREDIBLY well laid out and helppful, If I lived anywhere in the world except The US. There arent any Firmwares provided for North America there. Any other suggestions? That was a great resource if they only had some North America Help
xfile102 said:
@Kaze & @Medhi, I went to the Link you provide above, which is INCREDIBLY well laid out and helppful, If I lived anywhere in the world except The US. There arent any Firmwares provided for North America there. Any other suggestions? That was a great resource if they only had some North America Help
Click to expand...
Click to collapse
Use any version... It is universal! Stop complaining and use search MORE OFTEN!
Sent from my GT-I9100 using xda premium
Phistachio said:
Why don't people search...?
http://forum.xda-developers.com/showthread.php?t=1449771
Click to expand...
Click to collapse
Phistachio!!! Thank You. And to reply, I most certainly DID search, MANY, MANY topics. I thought my phone was bricked but came across SOOOO many threads saying if your phone would load into a ROM it is most certainly NOT BRICKED, leading a n00b such as myself to believe I needed to search for a different issue. Always helps to know what you are looking FOR when searching. This looks awesome. I will try it right away and get back to you with an update as to whether this fixes it.
Phistachio said:
Why don't people search...?
http://forum.xda-developers.com/showthread.php?t=1449771
Click to expand...
Click to collapse
Phistachio - I followed your link, but when you get to the following step:
4) Download the necessary files : the Kernel, the Recovery Package and the Bootloader (it's the old one, which you can easily use a USB JIG to reset the counter and remove the yellow triangle when having a custom kernel or OS),
The link provided for the Recover Package is a Hotfile.com link, and the Archive that it downloads is PASSWORD PROTECTED, and there is no mention of a password anywhere on the page you provided, nor on the hotfile.com page.
Any Ideas?
zylor said:
Use any version... It is universal! Stop complaining and use search MORE OFTEN!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Zylor, Thanks for the overt Negativity in your post. I was making sure we were clear, not complaining. I wasn't aware that telling someone that they have provided a great resource was "complaining". And when the OP AND the page he sends you to VERY CLEARLY say ONLY USE THE CORRECT VERSION, far be it for me to magically know that I can grab any random version from CHINA or wherever and have it work on my US ATT GS2. Sorry for trying to follow instructions and avoid a potential brick. But thanks for being a hateful Troll.
xfile102 said:
Phistachio - I followed your link, but when you get to the following step:
4) Download the necessary files : the Kernel, the Recovery Package and the Bootloader (it's the old one, which you can easily use a USB JIG to reset the counter and remove the yellow triangle when having a custom kernel or OS),
The link provided for the Recover Package is a Hotfile.com link, and the Archive that it downloads is PASSWORD PROTECTED, and there is no mention of a password anywhere on the page you provided, nor on the hotfile.com page.
Any Ideas?
Click to expand...
Click to collapse
Password is probably samfirmware.com or [email protected]
Are you sure you've got an I9100 and not an I9100G or whatever?
Sent from my Samsung Galaxy S II using Tapatalk.
mbutandola said:
Are you sure you've got an I9100 and not an I9100G or whatever?
Click to expand...
Click to collapse
Actually, you may be able to help me there. Most site reference only the I9100 or the I9100G. My Phone Hardware has a sticker saying SGH-I777, but the boot screen has always said GT-I9100. So which would it be?
xfile102 said:
Actually, you may be able to help me there. Most site reference only the I9100 or the I9100G. My Phone Hardware has a sticker saying SGH-I777, but the boot screen has always said GT-I9100. So which would it be?
Click to expand...
Click to collapse
You have the AT&T device.
Your correct forum is at http://forum.xda-developers.com/forumdisplay.php?f=1301
Not sure from the details supplied, but have youtried AT&T specific Roms?
Over at this site http://galaxys2root.com/category/att-galaxy-s2-roms/ (Thanks to Max) they have quite a few to try. And make sure you do a complete wipe before you flash one of them ie, factory reset, clear cache then advanced delvik cache and battery stats and then install from zip.
Hope this helps.
I followed all the instructions, and my phone rebooted into the ROM. But it is not stock. My Back and Search buttons still do not work, and the Recovery is 3e, so I cant use the Recovery function because my model (US AT&T) doesn't have the OK button. Since I cant get it to take a screenshot, i'll list the info below:
Android Version: 2.3.5
Baseband Version: I9100XXKI3
Kernel Version: 2.6.35.7-I9100XXKI3-CL577579 [email protected] #2
Build Number: GINGERBREAD.XXKI3
I just want to get it back to AT&T Stock, or a WORKING 2.3.6. But as it stands, It doesnt work properly, because my Back Button does not work, nor my Search button.
All Guidance is appreciated. I want to get back to the Stock Bootloader, not the ICS Bootloader
P.S. - I DID SEARCH FOR THIS INFO. When I did, I came up with threads like:
http://forum.xda-developers.com/showthread.php?t=1317372
- Turns out it only works on the CHINESE SGS2.
Bobgnarley said:
Not sure from the details supplied, but have youtried AT&T specific Roms?
Over at this site http://galaxys2root.com/category/att-galaxy-s2-roms/ (Thanks to Max) they have quite a few to try. And make sure you do a complete wipe before you flash one of them ie, factory reset, clear cache then advanced delvik cache and battery stats and then install from zip
Click to expand...
Click to collapse
Bob!! Thats exactly what I want to do. But I cant, because the Recovery installed on my phone wont let me do anything because I dont have the OK button on my phone. I tried the power button and everything else, I cannot make selections in Recovery 3e, so the only way to get out of it is to pull the battery.
Xfile if your sticker says at&t sgh-i777 theres a complete forum dedicated to that model here in xda. Better pop in there and find more help.
They also have model specific roms over there and surely they should work. Wannit to post the link but not sure how to from the xda app yet.
Good luck.
Sent from my GT-I9100 using xda premium
xfile102 said:
Phistachio - I followed your link, but when you get to the following step:
4) Download the necessary files : the Kernel, the Recovery Package and the Bootloader (it's the old one, which you can easily use a USB JIG to reset the counter and remove the yellow triangle when having a custom kernel or OS),
The link provided for the Recover Package is a Hotfile.com link, and the Archive that it downloads is PASSWORD PROTECTED, and there is no mention of a password anywhere on the page you provided, nor on the hotfile.com page.
Any Ideas?
Click to expand...
Click to collapse
No problem I'm glad I can help
The password is samfirmware.com
BTW, to replace the ICS bootloader flash the BL in the thread
Also, I would like to apologize for my first reply (the "Why didn't you search" one)... It was a bit rude...
Phistachio said:
No problem I'm glad I can help
The password is samfirmware.com
BTW, to replace the ICS bootloader flash the BL in the thread
Also, I would like to apologize for my first reply (the "Why didn't you search" one)... It was a bit rude...
Click to expand...
Click to collapse
No Sweat. I'm just trying to follow instructions and get this fixed ASAP. I did flash the bootloader mentioned, with no errors in Odin, but it still loads with the new galaxy S logo animation instead of the old GT-I9100 Logo with the Yellow Exclamation point. AND, I still have no use of the Back and Search buttons, functionality that is removed in the new ICS. What am I doing wrong? I cannot seem to get my phone back to Stock Android.
Got the Galaxy S3 on the 3 network in the UK, all was fine & dandy then found out about how the phone was updated & basically 3 sit twiddling their thumbs on it. Went looking for a solution, found a nice simple flash the phone with Odin, use proper Samsung firmware, thought that will do the trick for me.
Unfortunately I did exactly as I was told (didn't go down the root, well, route as there were too many options and I was lost as to wether I was using the right stuff) People swore by the flash to samsung firmware, did that last night, was perfect. Only thing left was the change csc thing, to select BTU but the option wasnt there...was told to download another firmware.......the phone returned with a "unfortunately, the process android.acore has stopped" message, was told to to a reset.......then got "unfortunately, messaging has stopped". Have flashed a few times now to no avail, I can no longer text, is my phone basically broken beyond repair?
Not ruined, but it sounds like you have clobbered some system files. Read up on rooting. Hopefully you can Root and then install a custom recovery like CWM then install a custom ROM.
It would have been better to have made a backup via recovery before you started flashing stuff.
Flash stock ROM and start again
Sent from my GT-I9300 using xda app-developers app
Or even factory reset .
But its a bad flash probably could be a corrupt download or wrong firmware .
jje
seems like u didnt follow the instructions and u could have even bricked your device all that i can say is factory reset or flash a new rom
SilvFlashProd said:
Not ruined, but it sounds like you have clobbered some system files. Read up on rooting. Hopefully you can Root and then install a custom recovery like CWM then install a custom ROM.
It would have been better to have made a backup via recovery before you started flashing stuff.
Click to expand...
Click to collapse
(s)he is having issues just fixing a stock rom misflash and you recommend a custom ROM? Even root was too complicated
I've flashed past phones to death and even still following instructions exactly, they don't always work as they should. Yeah they have cool features and yeah me or you can probably manage to fix any issues they throw up, but they are definitely not for everyone.
Sent from my GT-I9300 using xda app-developers app
bkr32 said:
seems like u didnt follow the instructions and u could have even bricked your device all that i can say is factory reset or flash a new rom
Click to expand...
Click to collapse
Bull****...his problems have nothing to do with a brick. Don't scare him.
i'd defo try a factory, cache and dalvik reset first before flashing again, you'l loose all your data but it may fix the problems you are experiencing.. Boot into recovery mode to do that.
Thanks for all the replies. I have flashed with Odin 3.04 & have found out 3.07 is out...could this be where it all went wrong? I tried following the rooting stuff but found so many variations & in my head (technology challenged when it comes to this) it was all going over my head. I did do the factory reset & reflash with a stock software (the latest I believe) but I don't know if it is a network thing which knackerec me, in CSC I have sales code saying H3G with no options to select BTU. If I post a screenshot of my settings (about device) would that help someone steer me in the right direction as a possible starting point.
My phone appears to be no longer 3 branded, but it should be locked to the 3 network in the uk.
I had the same issue with my Three branded phone. What i did was flash the rom with the PDA button ticked in Odin and then flashed it again with the same file but ticked the CSC icon instead of the PDA and it worked and then let me select BTU from the menu. Give it a try and report back, i'm 99% sure it'll work.
BTW you'll lose the HD voice by flashing it. I still havent found and easy way to get it back working.
bonzai1888 said:
Thanks for all the replies. I have flashed with Odin 3.04 & have found out 3.07 is out...could this be where it all went wrong?
No very unlikely i still use 1.30
I tried following the rooting stuff but found so many variations & in my head
One method works and is easy .
http://forum.xda-developers.com/showthread.php?t=1695238
Stock UK
http://forum.xda-developers.com/showthread.php?t=1646610
jje
Click to expand...
Click to collapse
JJEgan said:
bonzai1888 said:
Thanks for all the replies. I have flashed with Odin 3.04 & have found out 3.07 is out...could this be where it all went wrong?
No very unlikely i still use 1.30
I tried following the rooting stuff but found so many variations & in my head
One method works and is easy .
http://forum.xda-developers.com/showthread.php?t=1695238
Stock UK
http://forum.xda-developers.com/showthread.php?t=1646610
jje
Click to expand...
Click to collapse
The link for the stock you posted is what I used....didn't root as I said, but appeared to work perfectly. Then I lost access to kies & was told I needed to use csc to tick the BTU option & that would work, except I didnt & still don't have that option. Was given another link to apparently the same stock that had "multi csc options" & that when I got the Samsung acore error & I did a factory reset after about 30 minutes of trying to get into the options, then the messaging stopped working & I found out how to do te factory reset using te vol button home power thing. Is there a specific 3 firmware where I can get my phone branded again & take it from there?
Click to expand...
Click to collapse
djstevie said:
I had the same issue with my Three branded phone. What i did was flash the rom with the PDA button ticked in Odin and then flashed it again with the same file but ticked the CSC icon instead of the PDA and it worked and then let me select BTU from the menu. Give it a try and report back, i'm 99% sure it'll work.
BTW you'll lose the HD voice by flashing it. I still havent found and easy way to get it back working.
Click to expand...
Click to collapse
If I try this, what Rom did you use, was it the one in link after you?
What do you want .
Wait for updates via Kies and OTA or join XDA and flash Stock Samsung rom as released ???
Me no Kies and no OTA on my phone
Stock LG9 or leaked Jelly Bean .
jje
JJEgan said:
What do you want .
Wait for updates via Kies and OTA or join XDA and flash Stock Samsung rom as released ???
Me no Kies and no OTA on my phone
Stock LG9 or leaked Jelly Bean .
jje
Click to expand...
Click to collapse
I am happy flashing on release, please understand this is all new. If losing kies is not an issue coz I can just flash then cool. I thought kies was an essential part of the updating. I can use my phone fine just now (using go SMS Pro) but would like it back to fully working phone which would be sweet.
Nothing good is wrong with your phone. It's not even a brick yet. Flash a cwm recovery and then re trying using check rom.
Sent from my GT-I9300 using Tapatalk 2
None of these guys no what there talking about. You've bricked your phone and you won't be able to fix it. Best thing to do is cut your loss and sell it. I'll be generous and give you £50 pounds for it. That's right a fresh £50 note right now, hard cash delivered right to your door step, no questions asked!
Honestly though try flashing the original 3 firmware, it should be in the firmware thread I believe.
P.S You've not bricked your phone, no where near it so don't worry about it.
Sent from my GT-I9300 using xda premium
avocco said:
None of these guys no what there talking about. You've bricked your phone and you won't be able to fix it. Best thing to do is cut your loss and sell it. I'll be generous and give you £50 pounds for it. That's right a fresh £50 note right now, hard cash delivered right to your door step, no questions asked!
Honestly though try flashing the original 3 firmware, it should be in the firmware thread I believe.
P.S You've not bricked your phone, no where near it so don't worry about it.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks...I was giving up again to be honest as once again I was left not knowing what to do. I thought this would be the easiest place to ask but it was ending up in riddles, which is why I gave up on rooting it in the first place.
bonzai1888 said:
Thanks...I was giving up again to be honest as once again I was left not knowing what to do. I thought this would be the easiest place to ask but it was ending up in riddles, which is why I gave up on rooting it in the first place.
Click to expand...
Click to collapse
I'm on 3 UK same happened to me when I unbranded. Don't panic your phone is fine. Turn off phone then hold power + home + volume up. Let go when you see the Android man. Wipe factory reset and dalvik cache you will lose everything. Then reboot. Don't bother letting it boot back up, just hold power + home + volume down. Then flash unbranded rom via odin. Once done and booted type *#272*yourimei# and you should now have option of btu.
Sent from my GT-I9300 using xda premium
bonzai1888 said:
If I try this, what Rom did you use, was it the one in link after you?
Click to expand...
Click to collapse
Was the latest UK unbranded rom in the first page.
Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
kakadu44 said:
Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
Click to expand...
Click to collapse
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
SGH-i717 Home Keys not working
Bubbajoe40356 said:
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
Click to expand...
Click to collapse
Thanx for you reply..I did however flash stock 2.3.4 from oden..I deleted everything in recovery then went to oden and flashed the stock rom..Should i unroot/unbrick flash from oden?
That article about returning to original settings in Kies seems to make sense except for the fact that i cannot get Kies to recognise the phone...
Are we talking about Software ou Hardare issue in your opinion?
Cheers
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
SGH-i717 Home Keys not working
Bubbajoe40356 said:
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
kakadu44 said:
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
Click to expand...
Click to collapse
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Bubbajoe40356 said:
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
kakadu44 said:
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
Click to expand...
Click to collapse
Please can you advise me what is the best way to WIPE my phone of ALL my info to start over again, just like a complete wipe on my laptop..cheers
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
sp73smith said:
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
Click to expand...
Click to collapse
Hi there thanx for your answer..I have not tried at that site..this program will do what? COMPLETELY wipe my phone??cheers
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
SGH-i717 HOME keys are not working...
sp73smith said:
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Yep i used it..very good..But my original and main problem..Continues..NONE of my HOME keys are working..I fear that it is a Hardware issue with the SGH-i717..I guess i have to take it to Samsung for repair..Until someone else can give me a solution..I have tried everything and nothing has worked..No HOME keys..Cheers
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
SGH-i717 HOME keys are not working...
Hammerfest said:
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
Click to expand...
Click to collapse
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
kakadu44 said:
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
Click to expand...
Click to collapse
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
SGH-i717 HOME keys are not working...
Hammerfest said:
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
Click to expand...
Click to collapse
READY AND WAITING..THANX
Okay thank you for reply..I am ready to go with the install/flash...
When you get time to direct me to the correct ROM and Kernel i would be much obliged..In the meantime enjoy your rest..Cheers Mick