Related
hello people
i have removed the stock os from my archos 101 and have only urukDroid 0.7..
how i can install the cinema plugin on uruk?
thanks for help
greets
bd860
when you buy the plugin, you can download an .aos file called "cinema_XXXXXXXXX_plugin.aos" where XXXXX is some hash or key or whatever.
then restart the gen8 device into recovery mode and do upgrade firmware and install the plugin .aos file
Hi,
i've tried to install the file but i can't ...
I've uruk 1.0 when restart in recovery mode , go to update firmware, the device check the file system and after i get error update failed (1) ..
I have the same problem with UD 1.6RC1, how can i install the plugin who have i purchased?
I have only UD on my tablet intern.
guys - u can ONLY have ud - u always have the stock OS still.
So reboot holing down vol- key - boot into android and there install the aos file (go to filemanager and install by clicking on it)
(DONT try to flash the file with recovery)
then u can reboot into UD again and it should show up as registered there also (as far as i read)
When i reboot und holding - there is no point to boot Stock Android.
There ist only:
No
Reboot
Update Firmware
Repair System
Format System
Developer Edition Menu
No more ....
@piti only volume down and power. you help volume up + down and power, didn't you`?
When holding - and power on then comes:
No
Reboot
Update Firmware
Repair System
Format System
Developer Edition Menu
When click - (or hold +) and power on then comes:
Boot AlternativeOS
Repair menu
Backup menu
Boot UrukDroid
ah, I see. you have that multiboot thing on your archos, right? so better ask them for booting questions
OK i have click "Update Firmware" and install 2.4.65 on the tablet.
Now i have the entry "Android" in the boot menu.
I have installed the plugin under stock android and boot back in ud.
It works perfect now.
y - somehow u ****ed your stock rom before the "no" options should have sounded "android"
well glad u have made it now
Has anybody found a link to any custom or stock firmware for this tablet?
I have a small annoying issue that I am sure could be fixed with a flash, the back button randomly stops working until I reboot.
The baby Einstein on their 800 number thought a factory reset would fix it, then that using the software button was a good enough solution and had no clue about tablets in general. Through Support e-mail they were heading towards wanting me to ship the tablet back rather than supply a link to firmware. I explained to them it doesn't appear to be hardware related as it is random, and reboot fixes it.
im looking for the same firmware man, i have mine bricked :S
How to Flash Zeki TB782B, TB1082B Rom with Livesuit (UnBrick)
gmrastaman said:
im looking for the same firmware man, i have mine bricked :S
Click to expand...
Click to collapse
There is already a different thread on here with the information, but here is how I have personally done it......
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/show....php?t=1621831
ROM for Zeki TB753b
Do you happen to have the Rom for the TB753b (JB 4.1.1)? I have soft bricked my mom's tablet, and need the rom so I can flash it, and hopefully get her tablet back in working order.
Zeki TBD753B stock rom
I am generally good at finding stuff, but I too can not find the stock rom for the tbd753b 7" zeki tab. Any help would be much appreciated. Thank You
need build.prop
i need the original build.prop to flash to my messed up TB753B. does anyone got it??!!??
dragonfriend0013 said:
i need the original build.prop to flash to my messed up TB753B. does anyone got it??!!??
Click to expand...
Click to collapse
Do you still need the build.prop.original?
Sent from my TBD753B using Tapatalk 4
Got it working
vindicato said:
Do you still need the build.prop.original?
Sent from my TBD753B using Tapatalk 4
Click to expand...
Click to collapse
I was finally able to get access to it through ADB and reset the permissions on the file. all is good now. I do still have problems with the screen "double tapping" though and have not figured out how to fix it. Does yours do the same thing.
The only problem I seem to have is that top left hand corner. Sometimes you have to tap that location a couple of times if that's what you mean
Sent from my TBD753B using Tapatalk 4
---------- Post added at 06:42 PM ---------- Previous post was at 06:37 PM ----------
That and updating my Super su binary...
Sent from my TBD753B using Tapatalk 4
please give the firmware for tb753b
please give the firmware for tb753b. for Livesuit.exe
ROM for TAB ZEKI tbdc1093b
any have de rom for this tab? ZEKI tbdc1093b
fallen links , FID: BN TB782B
Can someone help me? I need this rom , my tablet is brick
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/show....php?t=1621831[/QUOTE]
ok guys, this is the easiest method for u guys who own a320y (ds) , maybe works with a320f version.
i have read many threads here according to gaining root for this device, but i got problem with twrp after flashing rom with odin. twrp cant mount /data
okay, here is the solution for u guys who dont have external sd card.
(READ IT CAREFULLY)
1. Download stock firmware related to your device (in this case, a320y/DS. but i think i t will working fine for a320f version)
2. Download Latest odin version from here https://odindownload.com/, and intall on your pc
3. Make sure u have adb installed on your pc, and also have samsung usb driver installed too. u can find it here
4. connect your device to pc on download mode (hold volume down , home, and power button until you see blue screen and press volume up button to go to download mode)
5. extract your firmware you download wherever you want.
6. open odin and you will see your device there. (something like 0:[com6])
7. choose the file you extracted (AP - AP , CSC - HOME CSC , BL - BL , CP - CP) , then un-tick the auto-reboot.
8. press start.
----------------------------------
9. when its done, disconnect your device, and connect it again.
10. press reset on odin
11. press ap button and select twrp file (.tar) = u can download twrp for our device here
12. untick auto reboot option again
13. press start.
---------------------------------
14.. when its done, force restart your device by pressing and hold vol down , home , power button until the screen is gone black. and the device will reboot to system.
---------------------------------
15. finish the setup for the first time, and enable the developer setting (go to about phone, software information and press build number 5-10 times)
16. press back button 2 times, and u will see developer option on the lowest screen.
17. go to developer option and enable OEM UNLOCK, disable auto update system, ENABLE USB DEBUGGING. see your phone screen, it will asking for usb debugging authorization. press yes
18. now go back to TWRP turning off your device, after the screen goes off, hold volume up, home button, and power button until u get inside twrp again.
19. download magisk zip here
20. press advanced button, and press sideload and enable it.
21. disconnect and reconnect your device to pc.
22. open CMD (win + R , and type CMD), now in command screen, type this
adb sideload yourdownloaddirectory/magisk-v16.0.zip
Click to expand...
Click to collapse
23. after the progress done, u can reboot your phone.
24. download magisk manager here and install on your phone, give permission to install the .apk file.
25. now your device is ROOTED, WITHOUT ANY LAG ON LOCKSCREEN, AND WITHOUT ANY PROBLEM WITH TWRP RECOVERY.
==i make this tutorial because i myself had facing the problem when installing twrp. after flashing the firmware and straight reboot to twrp, the /data folder is still mounted, but after reboot to system and back to twrp, it cant mount the /data anymore. so i need to wipe the data again and again. but after installing twrp and flashing the magisk.zip file , the problem with /data is gone. i dont need to wipe /data anymore :victory: and some people are facing the lag while unlocking screen with secured lockscreen (pattern/password) after rooting using chainfire.zip . but with magisk.zip , the lagg is gone forever ==
sorry for my english, but i think u guys can understand it.
Feel Free to ask me if u guys facing problem with this tutorial, i will help!
because many people here are helped me a lot for every problem i had, so i think this time is my time to helping others too
Is this guide for Nougat or Oreo?
AK2H said:
Is this guide for Nougat or Oreo?
Click to expand...
Click to collapse
ah yeah sorry, this tutorial is for Nougat version.
have not try oreo because still not released for my country.
Can I still use fingerprint to unlock the screen when rooting this way?
leo31 said:
ok guys, this is the easiest method for u guys who own a320y (ds) , maybe works with a320f version.
i have read many threads here according to gaining root for this device, but i got problem with twrp after flashing rom with odin. twrp cant mount /data
okay, here is the solution for u guys who dont have external sd card.
(READ IT CAREFULLY)
1. Download stock firmware related to your device (in this case, a320y/DS. but i think i t will working fine for a320f version)
2. Download Latest odin version from here https://odindownload.com/, and intall on your pc
3. Make sure u have adb installed on your pc, and also have samsung usb driver installed too. u can find it here
4. connect your device to pc on download mode (hold volume down , home, and power button until you see blue screen and press volume up button to go to download mode)
5. extract your firmware you download wherever you want.
6. open odin and you will see your device there. (something like 0:[com6])
7. choose the file you extracted (AP - AP , CSC - HOME CSC , BL - BL , CP - CP) , then un-tick the auto-reboot.
8. press start.
----------------------------------
9. when its done, disconnect your device, and connect it again.
10. press reset on odin
11. press ap button and select twrp file (.tar) = u can download twrp for our device here
12. untick auto reboot option again
13. press start.
---------------------------------
14.. when its done, force restart your device by pressing and hold vol down , home , power button until the screen is gone black. and the device will reboot to system.
---------------------------------
15. finish the setup for the first time, and enable the developer setting (go to about phone, software information and press build number 5-10 times)
16. press back button 2 times, and u will see developer option on the lowest screen.
17. go to developer option and enable OEM UNLOCK, disable auto update system, ENABLE USB DEBUGGING. see your phone screen, it will asking for usb debugging authorization. press yes
18. now go back to TWRP turning off your device, after the screen goes off, hold volume up, home button, and power button until u get inside twrp again.
19. download magisk zip here
20. press advanced button, and press sideload and enable it.
21. disconnect and reconnect your device to pc.
22. open CMD (win + R , and type CMD), now in command screen, type this
23. after the progress done, u can reboot your phone.
24. download magisk manager here and install on your phone, give permission to install the .apk file.
25. now your device is ROOTED, WITHOUT ANY LAG ON LOCKSCREEN, AND WITHOUT ANY PROBLEM WITH TWRP RECOVERY.
==i make this tutorial because i myself had facing the problem when installing twrp. after flashing the firmware and straight reboot to twrp, the /data folder is still mounted, but after reboot to system and back to twrp, it cant mount the /data anymore. so i need to wipe the data again and again. but after installing twrp and flashing the magisk.zip file , the problem with /data is gone. i dont need to wipe /data anymore :victory: and some people are facing the lag while unlocking screen with secured lockscreen (pattern/password) after rooting using chainfire.zip . but with magisk.zip , the lagg is gone forever ==
sorry for my english, but i think u guys can understand it.
Feel Free to ask me if u guys facing problem with this tutorial, i will help!
because many people here are helped me a lot for every problem i had, so i think this time is my time to helping others too
Click to expand...
Click to collapse
Do I have to perform steps 1-8 if I'm already in Nougat?
Has someone tried this on an SM-A320FL with Android 8.0 and SD card inserted?
simple_s said:
Has someone tried this on an SM-A320FL with Android 8.0 and SD card inserted?
Click to expand...
Click to collapse
It's works fine.
[Guide/tutorial] Samsung Galaxy Grand Prime VELTE/G531F from stock to custom ROM
[Guide/tutorial] Samsung Galaxy Grand Prime VELTE/G531F/grandprimevelte from stock to custom ROM
This detailed step-by-step guide helps you transform your Samsung Galaxy Grand Prime VE/LTE/531F to a powerful one with a custom Android 5.1.1.
Make sure your phone is SM-G531F before going further : in Android, go to Settings -> About -> Check model is G-531F.
AND note down the baseband version in a safe place (in case of device brick) : G531FXXU1APG2 in my case.
If not, quit this tutorial.
### Phone is reset and you can't access Android ? Shutdown phone, start in Recovery Mode (Hold Power + Home + Volume+) until you see Samsung logo and release buttons.
### In the recovery, on the 2nd line, look at the right part of the string after the . : G531FXXU1APG2 in my case, the first letters show G531F. It's good.
### AND note down the baseband version in a safe place (in case of device brick) : G531FXXU1APG2 in my case.
### If it is another model, quit this tutorial.
CHANGELOG ------------------------
v2. Enhenced FRP Lock bypass
v1. Initial release for Android 5.1.1
1) DOWNLOAD ---------------------
- djibe Galaxy Grand Prime VE/G531F pack v1 : http://bit.ly/djibe-grandprimeve-g531f-v1
(contains preconfigured Odin 3.13.1 + Samsung drivers + TWRP3.0.2-0 unofficial recovery + DeviceID app).
Unzip files from my pack.
+ ROM CS-Rom 3.2 (Android 5.1.1) : https://forum.xda-developers.com/grand-prime/general/g531f-galaxy-grand-prime-custom-stock-t3683569
Download from : http://bit.ly/grand-prime-csrom32
+ a microSD card. Copy ROM and deviceID.apk file on microSD card (FAT32 format) and insert it in phone.
+ Charge phone to 100 %
2) BACKUP DATA -------------------
Install Samsung drivers (you unzipped earlier).
Then plug phone to PC in File transfer mode.
Collect all .jpg or .mp4
Use an app like Backupyourmobile to backup texts, contacts, etc.
Check that backup is located on microSD card.
Then copy the backup on your PC.
3) FLASH TWRP3.0 RECOVERY ----------------
Shut down phone.
Boot in Recovery mode : Hold Home + Power + Volume+ until you see Samsung logo and release buttons.
Navigate with volume buttons to go over wipe data/factory reset menu. Confirm with Power.
Confirm again with yes using same buttons.
Shutdown phone.
Boot in Download Mode : hold Home + Power + Volume- until you see the download mode screen and release.
Confirm with Volume+.
Look at the FRP Lock line (5th line). If FRP lock is off, follow these instructions.
### If FRP Lock is on, move to the chapter below : 3bis)
Connect phone in USB, wait for bootloader drivers installation.
Then launch Odin.exe (included in my archive) and wait for Odin indicator ID:COM to become blue.
In options: Verify Auto Reboot and Re-Partition are NOT ticked while F. Reset Time is ticked.
On the right panel -> in AP menu -> select twrp-3.0.2-0-grandprimevelte.img.tar included in my pack.
### Don't use other menus like BL, CP or CSC (I desactivated them but we never know).
### Warranty will be Void after next click ###
Click Start.
Power Off phone when PASS! green message appears : hold Power + Home + Volume- until phone is shut.
3bis) Reset internal memory to bypass Google FRP lock. ONLY IF FRP LOCK IS ON in bootloader mode
If FRP lock is on, follow this chapter.
Boot in recovery mode (Hold Power + Home + Volume+ and release when Samsung logo is appears).
Use volume buttons to select Wipe data/factory reset, confirm with Power button.
Use volume buttons to select Yes -- delete all user data, confirm with Power button.
Then select Power down.
Go back to step 3.
### If it is still not working, follow next chapter 3ter).
3ter) Factory reset is not enough to remove FRP Lock
Go to SamMobile.com and create an account (Join button): https://www.sammobile.com/join/
Select the FREE join, complete registration.
Confirm registration by clicking on the verification email.
Now visite this page : https://www.sammobile.com/firmwares/galaxy-grand-prime/SM-G531F/
Select your corresponding country.
Now there are many versions for your country : look in the PDA column for the ones corresponding to your Baseband version you noted earlier (G531FXXU1APG2 in my case).
Preferably chose the one independant from a telecom operator, click on this line.
Then download the firmware, it's huge so be patient.
You then have a zip file on your PC. Unzip it 1 time (using 7-zip or other tool) to keep the file named like : G531FXXU1APG2_G531FOXX1APG2_G531FXXU1APG2_HOME.tar.md5
Start phone in recovery mode again, connect it to PC and Launch Odin.exe.
In AP, set this brand new ".tar.md5".
Wait for Odin to control md5 signature.
Then flash it. Be patient, all the partitions of the phone are being reset.
When Odin green success message appears, disconnect from PC, shut phone down by holding Power + Home + Volume-.
Now start phone in Download mode right away, FRP Lock line should be OFF.
Go back to step 3) at this line : "Connect phone in USB, wait for bootloader drivers installation.".
4) FLASH CUSTOM ROM
Start phone in recovery mode
TWRP is launching and reboots.
Check never show this screen during boot again and Swipe to Allow Modifications on first TWRP launch.
Go to Wipe menu -> Advanced Wipe : check Dalvik/ ART Cache, cache, system, Data and Internal Storage partitions.
Then Swipe to Wipe and wait for operations pending.
Go back to TWRP Home menu. Then tap on Install -> choose CSR*.zip
### If you don't see the files, tap on Select Storage and make sure Micro SDCard is active
then Swipe to confirm Flash.
Wait for operation to end.
Then tap Wipe cache/dalvik, swipe to confirm,
then Reboot System.
Wait for the phone to boot during 10 minutes.
5) ROOT ACCESS
The ROM has SuperSU preinstalled so no extra work to do.
6) CALIBRATE BATTERY
In Google Play Store, download App Battery Calibration (from IMobS Ltd).
Launch the App.
Confirm root acces.
Plug tab and wait till charge hits 100%, then hit BATTERY CALIBRATION and unplug it.
You can use GPS Status & Toolbox app for faster GPS fix.
7) OBTAIN GOOGLE MOBILE SERVICES (GMS) CERTIFICATION
Google now restricts Google Play and Google apps access to certificated devices. Since you have a custom ROM, you are banned.
We now need to subscribe for the Google Play Certification.
In Android, go to Settings -> Security and activate the Unknow sources
Now use the built in File explorer app to install the deviceID app from you microSD card.
Install it, launch it.
Tap on the Google Service Framework (GSF) line, then tap on the COPY button.
In your Android webbrowser, go to : https://www.google.com/android/uncertified/
Connect to Google using your Google/Android account.
In the input field of the page, paste the 16 digits code.
Click on the Save button, a success message confirms your device is Certified.
Do I need to re-certify it ?
"Your device’s GSF ID is reset every time your device is factory reset (or when you wipe the GSF app itself) since it is stored in your data partition, so you must re-register your GSF ID every time you perform either of these actions."
More info here : https://lineageos.org/Google-Play-Certification/
Enjoy,
djibe
Thanks : @adiJ5FN
Thanks @djibe89.
But I cannot install Root. Log there
Myself custom ROM install perfectly.
sashokmc said:
Thanks @djibe89.
But I cannot install Root. Log there
Myself custom ROM install perfectly.
Click to expand...
Click to collapse
Hi, root is built-in the ROM.
With what app the root is failing ?
djibe89 said:
Hi, root is built-in the ROM.
With what app the root is failing ?
Click to expand...
Click to collapse
I try install myself rom G531FXXU1AQK2 and supersu root zip. whatch log.
myself rom. https://drive.google.com/drive/folders/1Mv10hBhAvl23xlOPoGjNM4_rtO6sx8hS
sashokmc said:
I try install myself rom G531FXXU1AQK2 and supersu root zip. whatch log.
myself rom. https://drive.google.com/drive/folders/1Mv10hBhAvl23xlOPoGjNM4_rtO6sx8hS
Click to expand...
Click to collapse
Hi,
so you are trying to root an official firmware isn't it ?
I can't seem to find the custom rom you posted. Everytime i press on the google drive link it says '404 not found' Could someone help me with this issue?
TheGiovan said:
I can't seem to find the custom rom you posted. Everytime i press on the google drive link it says '404 not found' Could someone help me with this issue?
Click to expand...
Click to collapse
True, happily I kept it in case of crash.
http://bit.ly/grand-prime-csrom32
Enjoy
Hi guys, don't hesitate to report errors in my tutorial.
hi, i followed your tuto step by step then im in the new rom now and it works well but my FRP LOCK is back to ON and im not allowed to reboot in recovery mode anymore, i get a message in red (custom binary blocked by FRP).. I reflashed the stock rom then redo all the process but with the same issue. Can you help me with it please? thanks
estemanito said:
hi, i followed your tuto step by step then im in the new rom now and it works well but my FRP LOCK is back to ON and im not allowed to reboot in recovery mode anymore, i get a message in red (custom binary blocked by FRP).. I reflashed the stock rom then redo all the process but with the same issue. Can you help me with it please? thanks
Click to expand...
Click to collapse
Hi,
Sincerely I didn't try to access recovery again.
At least you can log to a phone where you don't know the original owner.
Sorry for that.
Looked up for newer packages for 531f.
This tutorial is up to date.
What is the best rom for this 531f phone? My mom has one and on stock rom it sucks badly.
crisbm said:
What is the best rom for this 531f phone? My mom has one and on stock rom it sucks badly.
Click to expand...
Click to collapse
Hi, no ROM is available for 531f, except the one I cite in this tuto.
crisbm said:
What is the best rom for this 531f phone? My mom has one and on stock rom it sucks badly.
Click to expand...
Click to collapse
Oooooops.
LineaOS 13 is available but marked as unstable : https://forum.xda-developers.com/grand-prime/development/lineageos-13-0-grand-prime-velte-t3874411
However users say it is pretty stable for a daily usage.
Read carefully the manual.
crisbm said:
What is the best rom for this 531f phone? My mom has one and on stock rom it sucks badly.
Click to expand...
Click to collapse
Latest Official Firmware with root (tutos available)
Optimized it myself by removing all crappy software pre-installed and some unnecessary services
Set Nova Launcher as default since TouchWiz is laggy asf
Updated
Hello there, I found 4 working custom roms for sm-g531f. This rom is great.
I just wanted to know if i can change the launcher back to touchwiz, i liked it more
ShakthiNandan said:
Hello there, I found 4 working custom roms for sm-g531f. This rom is great.
I just wanted to know if i can change the launcher back to touchwiz, i liked it more
Click to expand...
Click to collapse
Hi, Touchwiz is proprietary.
You can try Lawnchair or Nova launcher.
djibe89 said:
Hi, Touchwiz is proprietary.
You can try Lawnchair or Nova launcher.
Click to expand...
Click to collapse
oops, ok
the battery life with this rom is 10 times better than the lineage rom and even the stock rom.
I'll stick with this rom
Awesome work.
I couldn't post this in the phone's section so im posting it here.
I also can't post links so im sorry you have to google things
Easy steps for dummies:
1) download the latest firmware for it from sam mobile
2) download odin 3.13
BY THE WAY! Go to odin settings tab and tick off the auto reboot.
3) extract the firmware and put everything in its case except for home.csc
4)get your phone, go to settings > go to device info > go to software info > spam the buld number button till the message that you are a developer appears > go back > go to developer settings wich appeared bellow device info, > tick oem unlock on and usb debugging on
5) power off your phone by long pressing the power button and pressing the power off icon
6) hold volume down, power and home buttons at the same time till a warning appears, press volume up to go into download mode
7) connect phone to pc throught usb cable
8) go to ur pc and press START in odin
9) wait
Congratulations. You flashed your phone for the first time!
Now we're going to do the rooting.
Complete the setup, go to a browser and download Magisk Manager. In app it may show that you can update the magisk manager. Do that.
1) go to your pc and connect the phone to it throught usb
2) the ap file you had in your firmware? Copy that to the phone's SD card or internal memory if you have double the size of the ap or more.
3) go into magisk manager and click install magisk, click next on the first tab, on the second tab click the "patch" button and select the ap you just copied to your phone.
4) click next and wait for it to patch it
5) after patching, move the file to your pc and flash the phone throught odin(only the file wich is something like "magisk-patched" or something in the AP section. Nothing else in odin) and press start
6)Wait
7) boot phone up
8) go to a browser and download Magisk Manager again
9) it will ask you to install something, do it. After that it will restart
10) Wait
CONGRATULATIONS! You just rooted your phone.
This is only tested on Samsung Galaxy j5 2017 (SM-J530F)