I have just flashed a new Rom (CynoGen Mod 10 " http://forum.xda-developers.com/showthread.php?t=2206780 "), i followed the instructions letter by letter...
-Remove Battery - Insert Battery.
-Wipe data/factory reset.
-Wipe cache partition.
-Advance -> Wipe dalvik cache & Wipe battery stats.
-Flash Superwipemarvelcedition.zip (when it is installed in the terminal letters on the phone screen it says to restart and boot into recovery again before i proceed any further, i did it that way and without it (so yes i tried 2 times)).
-Flash custom ROM (with the Aroma installer, when i finished making choices, as if i want to have gapps, or what equalizer and player to use it goes into the process screen and in like 1-2 sec it's says it's finished without me seeing any action in the process meter except the starting 0.00%).
-Reboot promoted by the Aroma installer, witch brings me to the recovery mode again.
-ReBoot from recovery and then is brings me in FastBoot, every time i reboot is like i am holding the "VolDown + Power" simultaneously, couse every time i boot it goes there, to FastBoot...
-I tried again with diferent settings in the Aroma and it's always the same...
PLZ help me, i don't know what i can do...
AnacronPhoenix said:
I have just flashed a new Rom (CynoGen Mod 10 " http://forum.xda-developers.com/showthread.php?t=2206780 "), i followed the instructions letter by letter...
-Remove Battery - Insert Battery.
-Wipe data/factory reset.
-Wipe cache partition.
-Advance -> Wipe dalvik cache & Wipe battery stats.
-Flash Superwipemarvelcedition.zip (when it is installed in the terminal letters on the phone screen it says to restart and boot into recovery again before i proceed any further, i did it that way and without it (so yes i tried 2 times)).
-Flash custom ROM (with the Aroma installer, when i finished making choices, as if i want to have gapps, or what equalizer and player to use it goes into the process screen and in like 1-2 sec it's says it's finished without me seeing any action in the process meter except the starting 0.00%).
-Reboot promoted by the Aroma installer, witch brings me to the recovery mode again.
-ReBoot from recovery and then is brings me in FastBoot, every time i reboot is like i am holding the "VolDown + Power" simultaneously, couse every time i boot it goes there, to FastBoot...
-I tried again with diferent settings in the Aroma and it's always the same...
PLZ help me, i don't know what i can do...
Click to expand...
Click to collapse
Could be that the rom didn't install properly. Try a different rom and see if it fixes the problem.
Sent from my HTC One using Tapatalk 4
Hello,
I have the same problem... @WildfireDEV: How can I put a different ROM on my Wildfire S from inside the Fastboot?..
rocro said:
Hello,
I have the same problem... @WildfireDEV: How can I put a different ROM on my Wildfire S from inside the Fastboot?..
Click to expand...
Click to collapse
I am not familiar with your phone but does it have a external sdcard which you can insert. Try going to recovery and there should be an option to mount your phone storage to make it see able by a pc.
Sent from my HTC One using Tapatalk 4
Yeah right, found it, thanks.
That ROM seems to be buggy so I decided to try this one and I'm fully satisfied (everything works!).
To extend your internal space (150 MB) with your SD I would follow this instructions. Btw: I have done that steps before flashing the new ROM and it worked, I did not have to do this again after flashing, I think because this ROM has int2ext integrated, but I'm not sure, it just worked that way.
Related
how do i install it? im new to this and i need to know if i just flash the most current or do i have to flash a older version then do the new one?
You have to root your phone, and install a custom recovery.
If you already have that, just follow the instructions in the post:
For all users:
-Download Malice.zip and place on your sdcard.
-Boot into Clockwork Recovery and Wipe Data/Factory Reset Before You Move On.
-Flash Malice.zip.-While still in recovery: Wipe Cache Partition, and inside the advanced menu: Wipe Dalvik Cache and Fix Permissions
-Just These Three Steps, Do Not Factory Reset Again.
-Reboot Your Phone AND LET IT SIT. (I know you're excited, but its for the best.)
-After about 10 minutes, you should reboot again to clean things up and wipe out any bugs.
-Enjoy!
The above instructions are perfect, I've recently gone back to malice from simply honey. Don't forget to check out the themes for it as well. I'm using ice blue edition, and the assassin theme looks nice too.
Enjoy the nice ROM.
Sent from my SGS-t959 using XDA App
theexel said:
You have to root your phone, and install a custom recovery.
If you already have that, just follow the instructions in the post:
For all users:
-Download Malice.zip and place on your sdcard.
-Boot into Clockwork Recovery and Wipe Data/Factory Reset Before You Move On.
-Flash Malice.zip.-While still in recovery: Wipe Cache Partition, and inside the advanced menu: Wipe Dalvik Cache and Fix Permissions
-Just These Three Steps, Do Not Factory Reset Again.
-Reboot Your Phone AND LET IT SIT. (I know you're excited, but its for the best.)
-After about 10 minutes, you should reboot again to clean things up and wipe out any bugs.
-Enjoy!
Click to expand...
Click to collapse
(q1) my phone wont boot into the (Clockwork) mode you are sayin... it goes into the 4 option mode and thats it...
iTrollinn said:
(q1) my phone wont boot into the (Clockwork) mode you are sayin... it goes into the 4 option mode and thats it...
Click to expand...
Click to collapse
Do you have Clockwork installed form the Market? If so, you may have to Reinstall Packages twice in the 4 option recovery menu. That shoudl get you into CWR after the second one.
Make sure you have downloaded ROM manager from the market and have installed clockwork recovery from there first. Then if you are in the stock recovery, chooses reinstall packages.... You might have to do this twice I below to get into clockwork.... It's been a while since I've been on stock but that should get you in.
Sent from my SGS-t959 using XDA App
X10 mini pro
Unable to install any lower version of CM other than MiniCM10x
Able to flash the device with any Kernel
Unable to find busy box - message from FlashTool
Unable to Charge - red led blinks after 5 secs... Tried wipe battery status
after a long time it boots into MiniCM10 but battery does not charge
Able to boot to CWM recovery but uncertain when.....
MiniCM7.2.0 & 7.2.2+ Kernel nAa*11 & nAa*13 / 14 did not install, although the kernel could be flashed
Now trying to repair with SEMC software
Any Solution please or any similar case/error please let me know your solution
Photoneutron said:
X10 mini pro
Unable to install any lower version of CM other than MiniCM10x
Able to flash the device with any Kernel
Unable to find busy box - message from FlashTool
Unable to Charge - red led blinks after 5 secs... Tried wipe battery status
after a long time it boots into MiniCM10 but battery does not charge
Able to boot to CWM recovery but uncertain when.....
MiniCM7.2.0 & 7.2.2+ Kernel nAa*11 & nAa*13 / 14 did not install, although the kernel could be flashed
Now trying to repair with SEMC software
Any Solution please or any similar case/error please let me know your solution
Click to expand...
Click to collapse
read FAQ MiniCM10
Yenkazu said:
read FAQ MiniCM10
Click to expand...
Click to collapse
Thanks a lot:
i am trying to charge the battery with external source & insert...
i know that the performance of my phone was better with Android Gingerbread 2.3.7 mods - so wanted to go back...
i am not at all trying to hold any one responsible, i find it fun...
presently i want to end this by installing the one which was stable & fast for me.....
i have read the FAQ
any extreme suggestion too is welcome....:highfive:
Thanks to all Senior members & nAa
1. Install nAa 14 kernel with flashtool
2. Reboot the phone end immediately enter CWM
3. From Mounts and Storage menu, format /cache, /data and /system (you need to do that because the partition sizes are different between jb and gb)
4. From the advanced menu wipe dalvik cache
5. Do a wipe data/factory reset from the main menu
6. Reboot system and enter again CWM
7. Install the gb rom you like
it works
dimfil said:
1. Install nAa 14 kernel with flashtool
2. Reboot the phone end immediately enter CWM
3. From Mounts and Storage menu, format /cache, /data and /system (you need to do that because the partition sizes are different between jb and gb)
4. From the advanced menu wipe dalvik cache
5. Do a wipe data/factory reset from the main menu
6. Reboot system and enter again CWM
7. Install the gb rom you like
Click to expand...
Click to collapse
I have same problem, and your solution make it solved..
Thanks dude :good:
dimfil said:
1. Install nAa 14 kernel with flashtool
2. Reboot the phone end immediately enter CWM
3. From Mounts and Storage menu, format /cache, /data and /system (you need to do that because the partition sizes are different between jb and gb)
4. From the advanced menu wipe dalvik cache
5. Do a wipe data/factory reset from the main menu
6. Reboot system and enter again CWM
7. Install the gb rom you like
Click to expand...
Click to collapse
Thanks to B-Paul nAa & DarkDog & other contributors....
Thanks, but my problem seems to be in the micro USB port of the phone too. I have a doubt whether it can be replaced. Although it detects the cable but not most of the time. So I am using a external battery charger for time being.
The boot loader does not point to charging always even when its shutdown properly & plugged to charge, instead it goes to the CWM recovery. The last instruction is not registered well/properly instead it always tends to boot the OS or go to CWM Recovery....
I did not flash the 7.2.2 since I started to feel that the new Kernel from nAa jb.2 has improved the performance of memory handling a little & the home does not crash like the 7.2.0.
I have a very bad experience with the camera & video recording performance as mostly a noise band appears on the screen & photo comes black & video too comes same.... I think the driver for photo & video needs some more improvement...
Some apps gets into the phone memory for security or their code itself.........
Going to try some other ROM just for fun.......:laugh:
If we can make those /system & /data etc. virtual and we can add space from memory, performance could be improved
Looking forward for great ROMS in Windows8 style on X10 mini pro.
So I installed Paranoid Android 2.9.9 from
http://forum.xda-developers.com/showthread.php?t=1765185
I installed the rom and also
Flash Bluesleep Fix:
Options Chooser
The roms starts withouth gapps , and using the option chooser wont install them ,
I dont know if it s because og my clockwork recovery version, I had a 5.0 something and reading I moved to a 6.0.15
when I run the gapps installation file Options_Chooser_JB_Version_4_Olympus gives me status 0 at the end
somtimes when I reboot the romm I get the signed (updating andrioid ) and the sign counts like its installing the apps, and in fact some of them get installed like the not google ones, but cant get to install the playstore or the gmail one.
the only thing that I want is to be able to get netflix to install it on my lcd, didnt know it was that difficult. any clue ?
did you try wipe dalvik and cache, maybe a factory reset prior flashing gapps, and then clean dalvik and cache would help , somewhere ive read that a X2 flash rom X2 flash gapps X2 wipes could do the trick
sent from the gray stuff inside my skull
demonoid phenomenom said:
did you try wipe dalvik and cache, maybe a factory reset prior flashing gapps, and then clean dalvik and cache would help , somewhere ive read that a X2 flash rom X2 flash gapps X2 wipes could do the trick
sent from the gray stuff inside my skull
Click to expand...
Click to collapse
tried it and didn't work
cherupop said:
So I installed Paranoid Android 2.9.9 from
http://forum.xda-developers.com/showthread.php?t=1765185
I installed the rom and also
Flash Bluesleep Fix:
Options Chooser
The roms starts withouth gapps , and using the option chooser wont install them ,
I dont know if it s because og my clockwork recovery version, I had a 5.0 something and reading I moved to a 6.0.15
when I run the gapps installation file Options_Chooser_JB_Version_4_Olympus gives me status 0 at the end
somtimes when I reboot the romm I get the signed (updating andrioid ) and the sign counts like its installing the apps, and in fact some of them get installed like the not google ones, but cant get to install the playstore or the gmail one.
the only thing that I want is to be able to get netflix to install it on my lcd, didnt know it was that difficult. any clue ?
Click to expand...
Click to collapse
had the exact same issue ! >>>follow those steps and you will have a 100% workin Paranoid<<<
1st : do you try coming from another ROM ? Did you wipe/Fresh, or you are actually updating ?
2nd : th3bill actually are working to make the option chooser smaller since it is too big for our atrix system partition
3rd : just go to paranoid thread and see what ive done if you absolutely want that option chooser to work (NOT RECOMMENDED as it cause issues)
Workaround that really works no problem : go to recovery now that you have a fully working paranoid 2.9.9 that dont have any gapps and flash without wiping everything (that will NOT erase your app.. Just the ROM)
Reboot into Recovery
THEN :
Recovery>wipe CACHE partition
Recovery>advance>wipe dalvik cache (then go back)
Recovery>mounts&storage>format /system
Recovery>mounts&storage>format /preinstall (then go back)
Recovery>instal from sd card (external or internal, as you wish) and isntall Paranoid 2.9.9
>>>DONT REBOOT<<< at the end of aroma installer (uncheck the lil dot) then press finish (that will put you back in recovery)
back to recovery, go to advance again>fix permission
THEN,
Flash blusleep fix
flash Epinter's gapps (that will be FULLY compatible)
Let me know if you made it work
P.s.I had once, some issue with the playstore (i didnt wipe clean since 2.5.2) Force closing at the boot of the ROM and then, was unable to open at all !
If it happens on you, just go to system settings inside the rom>application>google playstore>erase Data>uninstall updates>reboot, it shoud do the trick
Plz, Hit the tanks button if i helped you
sathelate said:
had the exact same issue ! >>>follow those steps and you will have a 100% workin Paranoid<<<
1st : do you try coming from another ROM ? Did you wipe/Fresh, or you are actually updating ?
2nd : th3bill actually are working to make the option chooser smaller since it is too big for our atrix system partition
3rd : just go to paranoid thread and see what ive done if you absolutely want that option chooser to work (NOT RECOMMENDED as it cause issues)
Workaround that really works no problem : go to recovery now that you have a fully working paranoid 2.9.9 that dont have any gapps and flash without wiping everything (that will NOT erase your app.. Just the ROM)
Reboot into Recovery
THEN :
Recovery>wipe CACHE partition
Recovery>advance>wipe dalvik cache (then go back)
Recovery>mounts&storage>format /system
Recovery>mounts&storage>format /preinstall (then go back)
Recovery>instal from sd card (external or internal, as you wish) and isntall Paranoid 2.9.9
>>>DONT REBOOT<<< at the end of aroma installer (uncheck the lil dot) then press finish (that will put you back in recovery)
back to recovery, go to advance again>fix permission
THEN,
Flash blusleep fix
flash Epinter's gapps (that will be FULLY compatible)
Let me know if you made it work
P.s.I had once, some issue with the playstore (i didnt wipe clean since 2.5.2) Force closing at the boot of the ROM and then, was unable to open at all !
If it happens on you, just go to system settings inside the rom>application>google playstore>erase Data>uninstall updates>reboot, it shoud do the trick
Plz, Hit the tanks button if i helped you
Click to expand...
Click to collapse
Thanks sathelate for this tutorial.
I've tried a number of times to install this ROM without success. The last time my power button stopped working.
Do I need to run the Aroma prep before install?
bluegrass55 said:
Thanks sathelate for this tutorial.
I've tried a number of times to install this ROM without success. The last time my power button stopped working.
Do I need to run the Aroma prep before install?
Click to expand...
Click to collapse
nah, you need to flash aroma prep only once if you didn't switch recovery
Ouch :S is your power button ok ?! :S
Flash romracer recovery wich you can use capacituve button (menu:down,Home:up,Back:back,Search:enter) (is you change recovery, you will need to flash aroma prep back, then restart recovery before flashing
Let me know
It worked thanks for your tutorial, now I'm trying to run Netflix, you know off there is any setting to set, cause I open the app and close immediately, I'm not alter to even login or anything, just black screen and I get back to the menu, any clue on this?
Sent from my GT-I9100 using xda app-developers app
cherupop said:
It worked thanks for your tutorial, now I'm trying to run Netflix, you know off there is any setting to set, cause I open the app and close immediately, I'm not alter to even login or anything, just black screen and I get back to the menu, any clue on this?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
i think that root user cant use that app .. or at least JB users because i was having this problem since ive first flash paranoid :S (but i never tried before Cm10 Rom like on cm7/9)
I really want to make this to work, soo, let me know if you find anything on your side, and ill let you know on mine
I had the same problem, just installed gapps frontera Epinter and that's it. Check the post of the Paranoid ROM theres a user that post those gapps.
Hope you can solve it. I just did
Cheers!!!
Enviado desde mi Atrix 4G usando Tapatalk 2
sathelate said:
nah, you need to flash aroma prep only once if you didn't switch recovery
Ouch :S is your power button ok ?! :S
Flash romracer recovery wich you can use capacituve button (menu:down,Home:up,Back:back,Search:enter) (is you change recovery, you will need to flash aroma prep back, then restart recovery before flashing
Let me know
Click to expand...
Click to collapse
The power button behaviour has become very random and strange.
With the successful insatll of this rom I had to install "Button Remap apk" which set the search button to lock screen and longer press brings up the power button menu of reboot etc.
However with this rom the music player and the one I installed did not recognise a whole batch of a particular music file. So I went into recovery to restore a previous CM7 backup and hey presto the power button worked when selecting options. So I did the restore. The power button worked a couple of times then nothing. And the "Button Remap app" dosen't work in CM7.
I think the Aroma prep was the culprit.
I have been trying to install Resurruction Rom and here is my present status
Build - XXLQ6
ROM - SiyahKernel S2-v6.0beta4
The phone is presently rooted and is on ICS.
My next question (I have read the OP and here is what it has)
Reboot into recovery (Turn off your phone then press and hold the keys: Volume Up + Power + Home)
Wipe Data / Factory Reset
Install the Main ROM file -- Wat does this mean ?? Is it "Apply update from SD Card ??
In AROMA installer select "Custom Installation" -- Is this after the reboot ??
Choose depending of your taste
When AROMA installer finish untick the "Reboot Now" option
When you're back on the recovery go to Advanced
Wipe Dalvik Cache
Fix Permissions
Wipe Cache Partition
Reboot
When you get the step for add your Google Account, if you don't have a WiFi enabled or you can' add it, skip it
When you boot into the system, it's probably that you don't have data enabled (3g, H+) just reboot the phone
When you boot again into the system, the data will be enabled and you can do the configuration of Google Account (if you don't do this step before)
This is the moment for install all the extras like themes, mods, fixes, kernels, etc.
¡Enjoy!
Please help me with those 2 steps people..
Coolkriss said:
Reboot into recovery (Turn off your phone then press and hold the keys: Volume Up + Power + Home)
Wipe Data / Factory Reset
Install the Main ROM file -- Wat does this mean ?? Is it "Apply update from SD Card ??
In AROMA installer select "Custom Installation" -- Is this after the reboot ??
Please help me with those 2 steps people..
Click to expand...
Click to collapse
1) It means that you have to install the zip-file you've downloaded. So, just the rom-file. In Recovery, just go to 'Install zip from sd-card'.
2) No. When you flash the rom, Aroma will be started automatically from CWM (you'll see it when you try it).
So, boot into Recovery, make a Nandroid backup, do a full wipe, Install zip from sd-card (the rom-file), Aroma will be started, press Custom Installation, don't reboot afterwards but follow the steps that are written in the RR-thread.
Sent from the Matrix
Thanks man.. Am all set now .. cool
<snip>
Good morning to you all, and thanks in advance if you can help me.
I just received an Ace 4 Neo from a neighbor who asked me to 'make it faster' and 'newer'. Naturally, with the Stock ROM what Samsung overloads, I wasn't going to do nothing as close. I came to the always loyal xda and found the Mega Thread of Ace 4 Neo: https://forum.xda-developers.com/ace-4/development/rom-cyanogenmod-11-12-13-ace-4-neo-ace-t3627637
I put into the phone the oldest Stock ROM available from the same origin country and carrier (TIGO - Paraguay), and after installed Custom Recovery TWRP 3.1.1-0 and tried to install a Custom ROM. There is where my problems started.
First, I tried to put CM13 or MIUI (Android 6.x) with no success. The phone when turning on just showed the model and stayed there. The only change was a red exclamation sign on the upper part of the screen. (Possibly, this will be helpful for you: When installing, the result said [ ] instead of [/system])
After 6 failures with each one, I desisted and instead tried with CM12.1 and this one successfully installed. I also tried to use OpenGApps Pico (as I really messed up trying to find how to install the GApps of the thread), and the phone turned on "without problems" (the CM in fact started, but the red exclamation point is still there).
After 8 minutes configuring the GApps, I configured the Google Account and such. However, I went to Play Store for naturally install WhatsApp, Facebook, Twitter... The common things.
Surprise! The phone when installing suddenly rebooted. When turned on again, the home screen closed and opened 4-5 times in 20 seconds and rebooted again. It maintained on that loop over and over.
So, am I doing something wrong? Or do you know about how to fix any of the previous issues?
As a final note, because the Mega Thread doesn't have the classic installing instructions, after navigation for 2 hours I constructed this steps:
1. Reboot to Custom Recovery
2. Wipe > Advanced Wipe > Everything except Internal Memory and SD Card (Dalvik + System + other two things)
3. Install ROM
4. Wipe Cache/Dalvik Cache (the button what shows there)
4. Install GApps
5. Wipe again Cache
6. Reboot
Again, thanks in advance.
Hi, @Pedreo1997. You need wipe internal storage, too.
Step-by-step install custom ROMs:
Flash oldest stock ROM with Odin.
Reboot system > use 1-2 minutes ( for sure )
Install TWRP 3.x.x
Wipe everything except sdcard.
Wipe > advance wipe > check system > option > repair
Install ROM and Gapps.
Reboot and enjoy