I was trying to put eclipse rom on my wife's XT 910, so I backed up the kernel and CID with BMM, flashed the kernel, erased CID, then flashed the rom and patch. when i rebooted i tried to boot through BP tools and I get the dead CID error. I cant boot the phone past AP fastboot, please someone help before my wife's patience runs out...
jessel0001 said:
I was trying to put eclipse rom on my wife's XT 910, so I backed up the kernel and CID with BMM, flashed the kernel, erased CID, then flashed the rom and patch. when i rebooted i tried to boot through BP tools and I get the dead CID error. I cant boot the phone past AP fastboot, please someone help before my wife's patience runs out...
Click to expand...
Click to collapse
Try to restore CID.
TunneIVision said:
Try to restore CID.
Click to expand...
Click to collapse
i restored cid and eu kernel, no i get boot failure with all boot options and my bootloader reads
0A.6c.
Invalid CG OTV (CG webtop): invalid so data)
invalid CG HAB (CG: webtop, status: 0x004e)
invalid CG OTV (CG:webtop)
jessel0001 said:
i restored cid and eu kernel, no i get boot failure with all boot options and my bootloader reads
0A.6c.
Invalid CG OTV (CG webtop): invalid so data)
invalid CG HAB (CG: webtop, status: 0x004e)
invalid CG OTV (CG:webtop)
Click to expand...
Click to collapse
Try to install your previous rom.
TunneIVision said:
Try to install your previous rom.
Click to expand...
Click to collapse
I still can't access any recoveries, I think I'm going to have to RSD back to stock when i can download the SBF.
I'm going to try to flash a fresh webtop first
After I restored the cid and kernel I just had to upgrade the boot loader.
Sent from my DROID RAZR using xda app-developers app
Related
How to fix this problem ?
AP Fastboot Flash Mode (S) (Boot Failure)
Battery OK
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG HAB (CG: system, status: 0X0035)
Invalid CG OTV (CG: system)
You have problem with the recovery , so i think you need a Stock Recovery, request from ( kholk ) .
in FASTBOOT
fastboot flash recovery recovery.img
where i can download recovery.img file?
I have make dd /dev/block/mmcblk1p15 which is belong to recovery partition (stock recovery).
See if this could help.
http://www.mediafire.com/?ccmap2alh8355wc
p/s: I'm not responsible if you hardbrick the phone.
polaris441 said:
I have make dd /dev/block/mmcblk1p15 which is belong to recovery partition (stock recovery).
See if this could help.
http://www.mediafire.com/?ccmap2alh8355wc
p/s: I'm not responsible if you hardbrick the phone.
Click to expand...
Click to collapse
You have made on dorid razr not razr european version (910). Can you make boot.img also or explain the way?
acer73 said:
You have made on dorid razr not razr european version (910). Can you make boot.img also or explain the way?
Click to expand...
Click to collapse
You can backup the partition on your phone using dd command in terminal.
You can check the block partition using root explorer, then go to /dev/block where you can see the symlink of the partition blocks.
This is on my phone (SEA version):
mmcblk1p14 boot
mmcblk1p21 cache
mmcblk1p16 cdrom
mmcblk1p18 cid
mmcblk1p25 emstorage
mmcblk1p19 kpanic
mmcblk1p17 misc
mmcblk1p7 pds
mmcblk1p22 preinstall
mmcblk1p15 recovery
mmcblk1p20 system
mmcblk1p24 userdata
mmcblk1p8 utags
mmcblk1p23 webtop
command on terminal (e.g. to backup system partition):
dd if=/dev/block/mmcblk1p20 of=/mnt/sdcard/system.img
replace sdcard to sdcard-ext if the image to be copied on external sdcard
PLZ Give me this files:
boot
cache
cid
pds
recovery
webtop
thanks polaris 441. FR version have same block partition. So if my phone have a problem with boot just becouse in every start i see ap fastboot failure i can use a boot.img from another Fr phone?
acer73 said:
thanks polaris 441. FR version have same block partition. So if my phone have a problem with boot just becouse in every start i see ap fastboot failure i can use a boot.img from another Fr phone?
Click to expand...
Click to collapse
Yes you can .
medo18 said:
Yes you can .
Click to expand...
Click to collapse
medo18 for AP Fastboot Flash Mode (S) (Boot Failure) i flash with fastboot only boot.img to recovery the error. peraphs i can't flash with closed bootloader?
Just take note that fastboot has certain limitation on the file size it can handle. During my atrix days, I use moto-fastboot to flash big img file like system and webtop.
polaris441 said:
Just take note that fastboot has certain limitation on the file size it can handle. During my atrix days, I use moto-fastboot to flash big img file like system and webtop.
Click to expand...
Click to collapse
so the question is different. Can i flash boot.img or system.img on unlocked bootloder? MOTO-FASTBOOT IS COMPATIBLE ON RAZR? thanks for answers
acer73 said:
so the question is different. Can i flash boot.img or system.img on unlocked bootloder? MOTO-FASTBOOT IS COMPATIBLE ON RAZR? thanks for answers
Click to expand...
Click to collapse
I don't know and I do not dare to try yet as no sbf/fxz available as backup.
If my phone already softbrick like OP, maybe I will try.
The OP needs a system.img, not a recovery.img as started by the error displayed.
It seems that on RAZR Motorola wanted to prevent self repairs: on ATRIX for example the dd solution worked, here it seems that dd isn't able to copy the entire partition with its signature (consequently fastboot fails to flash due to missing signature).
At least from what I've read on my recovery thread. I've never personally tried to flash the image as my device is still alive....luckily.
Yes he need that and maybe PDSFIX.IMG like my Atrix 4g, the problem here is with the partition.
med18 and kholk,
plz help me because my battery is low and i cant do anything by fastboot, i cant charge battery.
WHT CAN I DO PLZ ?!
I think you have a tow choice :
1- Replace the battery with anyone.
2- Use FACTORY CABLE but i think is very risk, here
http://forum.xda-developers.com/showthread.php?t=1081743
medo18 said:
I think you have a tow choice :
1- Replace the battery with anyone.
2- Use FACTORY CABLE but i think is very risk, here
http://forum.xda-developers.com/showthread.php?t=1081743
Click to expand...
Click to collapse
Replace the battery is out of choice.
Sent from my XT910 using XDA App
acer73 said:
medo18 for AP Fastboot Flash Mode (S) (Boot Failure) i flash with fastboot only boot.img to recovery the error. peraphs i can't flash with closed bootloader?
Click to expand...
Click to collapse
your device is EU?
Yes, euro in particular FR
Inviato dal mio XT910 usando Tapatalk
hello! I was on ICS T-mobile and I tried to go to ICS Brasil.
I restored my mmcblk1p18 and cdrom after flash ICS Brasil and now I got error during reboot.
When I choose "Recovery" after AP fastboot, i
get the following errors.
Invalid CG OTV (CG: cdrom): Invalid SP Data
Invalid CG HAB (CG: cdrom), status: 0X0056)
Invalid CG OTV (CG: cdrom)
I tried to flash cdroms from diferents firmwares and nothing. I cant enter anymore to recovery, just AP fastboot.
I used RSD lite, moto-fastboot, everything and I just got that message "Invalid CG OTV....."
Please could you help me how to solve that problem?
you need to flash GB cdrom_signed from fastbootfiles, which is latam for you i guess
sevenup30 said:
you need to flash GB cdrom_signed from fastbootfiles, which is latam for you i guess
Click to expand...
Click to collapse
I already try that too... and keep with same error. it dont let me flash GB cdrom_signed.
And you are rigth, is a Latam. Sorry for my english...
Flash ebr_signed and mbr_signed from GB 2.3.6 and you'll be good.
Remember to renane the files .img and do
Code:
fastboot flash ebr ebr.img
Code:
fastboot flash mbr mbr.img
Sent from my XT910 using xda premium
pedrotorresfilho said:
Flash ebr_signed and mbr_signed from GB 2.3.6 and you'll be good.
Remember to renane the files .img and do
Code:
fastboot flash ebr ebr.img
Code:
fastboot flash mbr mbr.img
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
Hi Pedro!!!
i'll try that when come back to my home. I already flashed that files, but with RSD lite and nothing.
I hope this time it works. Thanks a lot!
pedrotorresfilho said:
Flash ebr_signed and mbr_signed from GB 2.3.6 and you'll be good.
Remember to renane the files .img and do
Code:
fastboot flash ebr ebr.img
Code:
fastboot flash mbr mbr.img
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
I made that and nothing changes :crying:
think my trouble is whith the cdrom. Cant flash it, if I could erased, but my fhone dont boot, cant enter in recovery, i dont know what to do!
when i tried to flash GB cdrom show this:
sending 'cdrom' (216832 KB)... OKAY [31.087s]
writing 'cdrom' ... INFOPreflash validation failure
FAILED (remote: )
rebooting....
:good:
Actually I could repair my phone. I just erased the cid partition using RSD lite.
i used T-mobile 2.3.6 file xml and put this
flash mbm allow-mbmloader-flashing-mbm.bin
Reboot-bootloader
Erase cid
And I was able to flash retail Brasil 2.3.6 and then apply OTA.
Thanks anyway and I hope this works for others with same problem with mmclk1p18 restaured and brick Razr.
Hello I inadvertently flashed his XT910 XML firmware 4.1.2 for XT912. The telephone does not work. I tried unbrick, but it does not work, does not start recovery. Runs only bootloader error "Invalid CG OTV".
Help restore the phone, please.
Thank you!
I am sorry for my bad English, I use Google Translate
UPD:
Through RSD Lite to flash now can only XT912 JB.
The phone turns on, but does not load launcher etc.
Other firmware via RSD not even installed. An error "failed flashing process 13/18 flash system".
I got that error too, try downloading the file again ut was a bad download or corrupted file...
Sent from my XT910 using xda premium
Steven87 said:
I got that error too, try downloading the file again ut was a bad download or corrupted file...
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
Thanks for the reply! Unfortunately, this does not resolve the problem.
I think we should wait for the XML JB XT910.
I had the same problem, i switched from ICS to JB.vodafone and kept my root with Voodoo root keeper. One time my phone got into bootloop after restart (messed with build.prop a bit ).
Well i flashed a lot of stupid firmwares over RSD even x912 jellybean fastboot files on my x910 . But it just doesnt work
So a guy came to XDA forums and wrote this http://forum.xda-developers.com/showthread.php?t=2194825 I fallowed this instruction and got unbricked
I lost my Root, but i can atleast use my phone, which is more important :victory:
So there is one more side note to this tutorial
(as i flashed all sorts of files into my phone by trying to unbrick it, my partitions were a mess so)
So Before You use HDA-Pilot's instructions flash all partitions that you still have access to by hand.
Download EuroperRETAIL fastboot files that HDA gives you in his thread and flash with fastboot like this:
->fastboot flash recovery recovery.img
->fastboot flash cdrom cdrom_signed.img
...........
.....
...
Do this too all files and you will get error on system_signed and Boot.img, but your partitions will be ready to house euRetail JB and you will get System and Boot flashed on HSD-Pilot's tutorial, just before unbricking your doodles
TeddyOFLove said:
I had the same problem, i switched from ICS to JB.vodafone and kept my root with Voodoo root keeper. One time my phone got into bootloop after restart (messed with build.prop a bit ).
Well i flashed a lot of stupid firmwares over RSD even x912 jellybean fastboot files on my x910 . But it just doesnt work
So a guy came to XDA forums and wrote this http://forum.xda-developers.com/showthread.php?t=2194825 I fallowed this instruction and got unbricked
I lost my Root, but i can atleast use my phone, which is more important :victory:
So there is one more side note to this tutorial
(as i flashed all sorts of files into my phone by trying to unbrick it, my partitions were a mess so)
So Before You use HDA-Pilot's instructions flash all partitions that you still have access to by hand.
Download EuroperRETAIL fastboot files that HDA gives you in his thread and flash with fastboot like this:
->fastboot flash recovery recovery.img
->fastboot flash cdrom cdrom_signed.img
...........
.....
...
Do this too all files and you will get error on system_signed and Boot.img, but your partitions will be ready to house euRetail JB and you will get System and Boot flashed on HSD-Pilot's tutorial, just before unbricking your doodles
Click to expand...
Click to collapse
Thank you very much for your reply!
Unfortunately, nothing happened. Maybe we did something wrong, I do not know.
superdeman said:
Thank you very much for your reply!
Unfortunately, nothing happened. Maybe we did something wrong, I do not know.
Click to expand...
Click to collapse
What region are you from?
Is it XT910 you are using?
Did you try to fallow HSD guide and flash FF manually before hand? If so then what happened what is the issue after doing so|?
TeddyOFLove said:
What region are you from?
Is it XT910 you are using?
Did you try to fallow HSD guide and flash FF manually before hand? If so then what happened what is the issue after doing so|?
Click to expand...
Click to collapse
Device regoin EMEA. I'm from Belarus.
Yes, i use XT910.
Tried to do the instructions, but after that nothing changes. Loaded only bootloader with an error partition system.
If you is not difficult, please write how you restore your phone, step by step with links.
I would be very grateful!
superdeman said:
Device regoin EMEA. I'm from Belarus.
Yes, i use XT910.
Tried to do the instructions, but after that nothing changes. Loaded only bootloader with an error partition system.
If you is not difficult, please write how you restore your phone, step by step with links.
I would be very grateful!
Click to expand...
Click to collapse
I will try. But remember this is all HSD-Pilots work, i only try to make it clear to you.
1) download These fastboot files.rar (clink on text)
2)download retailEU. jellybean OTA
3)Download HSD-pilots UNBRICK.rar
4)UNRAR HSD-pilots UNBRICK.rar from step (3) to any new folder (lets name it UNBRICK)
5) UNRAR Fastboot files:
cdrom_signed
cdt.bin_signed
devtree_signed
ebr_signed
mbr_signed
recovery_signed
radio.img
system_signed
from step (1) to Folder from step (4) we named UNBRICK ONLY extract files i said
6)Connect your device to pc
7)open UNBRICK folder Hold shift and right click on white space -> then press OPEN COMMAND WINDOW HERE
8)flash files from step (5) by writing in the command window you opened:
mfastboot flash cdrom cdrom_signed
mfastboot flash cdt.bin cdt.bin_signed
mfastboot flash devtree devtree_signed
mfastboot flash ebr ebr_signed
mfastboot flash mbr mbr_signed
mfastboot flash recovery recovery_signed
mfastboot flash radio radio.img
9)with the phone still connected to PC open UNBRICK folder and tun Unbrick.bat.
10) after unbrick.rar flashed press power button once, and immediately hold volume up + volume down and press power again
11) go down to recovery and press volume up
12) when you just follow instructions in bat file. see android picture press volume down and volume up at the same time and wait for radio to install
13) after installation of radio wipe data and catch -> navigate to factory reset and do it
14) Then go to install update from external memory and install retailEU. jellybean OTA that you downloaded (you have to put it to your external SD card)
15) If all is fine it will update, just reboot and its unbricked
TeddyOFLove said:
I will try. But remember this is all HSD-Pilots work, i only try to make it clear to you.
1) download These fastboot files.rar (clink on text)
2)download retailEU. jellybean OTA
3)Download HSD-pilots UNBRICK.rar
4)UNRAR HSD-pilots UNBRICK.rar from step (3) to any new folder (lets name it UNBRICK)
5) UNRAR Fastboot files:
cdrom_signed
cdt.bin_signed
devtree_signed
ebr_signed
mbr_signed
recovery_signed
radio.img
system_signed
from step (1) to Folder from step (4) we named UNBRICK ONLY extract files i said
6)Connect your device to pc
7)open UNBRICK folder Hold shift and right click on white space -> then press OPEN COMMAND WINDOW HERE
8)flash files from step (5) by writing in the command window you opened:
mfastboot flash cdrom cdrom_signed
mfastboot flash cdt.bin cdt.bin_signed
mfastboot flash devtree devtree_signed
mfastboot flash ebr ebr_signed
mfastboot flash mbr mbr_signed
mfastboot flash recovery recovery_signed
mfastboot flash radio radio.img
9)with the phone still connected to PC open UNBRICK folder and tun Unbrick.bat.
10) after unbrick.rar flashed press power button once, and immediately hold volume up + volume down and press power again
11) go down to recovery and press volume up
12) when you just follow instructions in bat file. see android picture press volume down and volume up at the same time and wait for radio to install
13) after installation of radio wipe data and catch -> navigate to factory reset and do it
14) Then go to install update from external memory and install retailEU. jellybean OTA that you downloaded (you have to put it to your external SD card)
15) If all is fine it will update, just reboot and its unbricked
Click to expand...
Click to collapse
Thank you! Excellent manual! It's simple and clear.
But, unfortunately:
Code:
mfastboot flash cdt.bin cdt.bin_signed
sending 'cdt.bin' (16 KB)... OKAY [ 0.000s]
writing 'cdt.bin'... INFOPreflash validation failure
FAILED (remote: )
superdeman said:
Thank you! Excellent manual! It's simple and clear.
But, unfortunately:
Code:
mfastboot flash cdt.bin cdt.bin_signed
sending 'cdt.bin' (16 KB)... OKAY [ 0.000s]
writing 'cdt.bin'... INFOPreflash validation failure
FAILED (remote: )
Click to expand...
Click to collapse
Just ignore it
it doesnt matter as long as you fallow all at steps. the end should be unbricked, and it was bad tutorial just didnt have much time to make it easier to read.
i think cdt.bin was supposed to fail others will not, i just didnt remember the details as i did it week ago
So as i said just do it from start and copy all errors you get, as it may just be something i overlooked and it will still unbrick your phone hopefully, other wise we get more data on what might be wrong. Actually if you would agree on live session on team-viewer so i can control your pc and do it for you it would be ok too .
hi, i have an european gsm xt910 with deleted CID and verizion us jb (http://forum.xda-developers.com/showthread.php?t=2182674).
i've been using it for a couple of weeks with no problem, but today, after i turned off the phone, each time i try to turn it on it appears a black screen with the following white things (like the fastboot mode):
AP Fastboot Flash Mode (S) (Boot Failure)
0A.6c
To return to normal mode - first press power key to power down
Device is LOCKED. Status code: 0
Battery OK
OKto Program
Connect USB
Data Cable
Invalid CG OTV (CG: webtop): Invalid SP Data
Invalid CG HAV (CG: wbtop, status: 0X004E)
Invalid CG OTV (CG: webtop)
Click to expand...
Click to collapse
is it bricked? do i have to follow HDA-Pilot's instructions or is it something different since i deleted my CID (although i have a backup, i can't recover it because i can't boot into recovery)?
if there's another way to recover my phone with keeping root would be great, but of course it's better to have a working phone without root than a rooted brick
this evening i'm leaving for the whole weekend, so it would be awesome if you could answer me asap, so i can (hopefully!) fix my phone before departing. TY!
AW: Bricked XT910
http://forum.xda-developers.com/showthread.php?p=38189529
Gesendet von meinem XT890 mit Tapatalk 2
HSD-Pilot said:
http://forum.xda-developers.com/showthread.php?p=38189529
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
thanks a lot man!! i solved it by simply running the whirleyes's razr_bl_mbm_*.zip you linked me to.
Me too! jeje
ok, i got a new message similar to the previous one. this is the situation:
i have an italian gsm xt910 with deleted CID and verizion us jb (http://forum.xda-developers.com/show....php?t=2182674) and i tried to install the CM10.1 xt910 version. i use BMM.
- during boot i went to BMM and restored CID
- wiped everything
- installed the lastest CM10.1 nightly (0430) + gapps
and after i booted the phone it appeared the following message:
AP Fastboot Flash Mode (S) (Boot Failure)
0A.77
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status code: 0
Battery OK
OKto Program
Connect USB
Data Cable
Invalid CG HAB (CG: boot, status: 0X0056)
Click to expand...
Click to collapse
and i can't go to recovery anymore, since this message appears ASAP the phone starts. what happened? how can i fix this? ty in advance.
i found this thread (http://forum.xda-developers.com/showthread.php?t=2194825), but i'd rather not lose root + recover it using linux (never used linux), if it is possibile. is it enought to go here and install the retail UK firmware using RSD lite?
edit: ok i used rsd lite 6.15 + the UK JB firmware. now i'm fighting (using this thread) to gain my root rights back
First of all, this what I have and what I have and what has Happen:
Motorola razr GSM XT910
I have been running JB for a while via this method: http://forum.xda-developers.com/showthread.php?t=2078021
Today i flashed a new rom: http://forum.xda-developers.com/showthread.php?t=2213422
And it was awesome.
I made a Nandroid backup and then restored it after i did some thing on the phone. But then when i booted it, I just got to ther fastboot menu eveytime. I thought it was dead until I updated my Bootloader to A0.77: http://forum.xda-developers.com/showthread.php?t=1893347&page=3
Now, however, I don't have a clue on what to do. I have proably donwloaded over 5 different fastboot versions, both ICS and JB and tried to flash the phone with these. The process go well but it always ended up with a Black screen, and I have to ashut it down by holding the buttons.
Do anyone have any tips for me pn what I can do or is it truly bricked? I don't have any mone to buy a new phone right now, so I would have to use my old Sony Ericsson K810i
Next time, read the OP carefully, it says it must on the 982.124.14.XT910.Retail.en.AU JB OTA, the jelly bean you are running before is the verizon jelly bean, its not compatible, so you need to fastboot back to ics, the jelly bean fastboot you have downloaded is for verizon US only, theres no yet jelly bean fastboot for gsm, make sure you get to the AP Fastboot mode by going through the bootloader,
anyway, what are the errors showing on the screen?
TheMrcool212 said:
Next time, read the OP carefully, it says it must on the 982.124.14.XT910.Retail.en.AU JB OTA, the jelly bean you are running before is the verizon jelly bean, its not compatible, so you need to fastboot back to ics, the jelly bean fastboot you have downloaded is for verizon US only, theres no yet jelly bean fastboot for gsm, make sure you get to the AP Fastboot mode by going through the bootloader,
anyway, what are the errors showing on the screen?
Click to expand...
Click to collapse
I know I should, my bad, but done is done.
Before, I couldn't even use the bootloader, it just took me into fastboot mode directly and I got messages like: "Ivalid CC OTC/CC:webtop):Invalid sp data"
but after updating the fastboot loader to a0:77 I can now use the whole bootloader and I don't get this message. But I can still not use my old ICS fastboot files which i used for a month ago.
Do you know any ICS Fastboot files that would work?
I tried SPDREM_U_01.6.7.2-180_SPU-19-TA-11.2_SIGNEuropeAustraliaEMEA_USASPDRICSRTGB_HWp2b_Service1FF_fastboot.xml
But it didn't work.
I will try and fic the webtop, will update.
it seems that you have problem with the webtop partition, so you need to flash the gingerbread webtop (not installing gingerbread) .theres a tool that can flash the webtop_signed partition. you can download the files here
http://d-h.st/m8W
http://sbf.droid-developers.org/umt...USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
extract the Flash IT.rar and the fastboot xml.xip you've downloaded. also extract the ICS fastboot file and copy the webtop_signed file in the gingerbread fastboot folder to the ICS fastboot folder, and also copy all the files in the Flash IT folder and put it in the ICS folder
Now, enter to AP fastboot mode and connect it to your PC, in the ICS fastboot folder, run the FlashME.bat wait for it to flash
Okay, I'm gonna try that.
It finished without problems but I got these messages:
Invalid CG OTV(CC: cdrom): Invalid SP Data
Invalid CG OTV(CC: system): Invalid SO Data
Invalid CG version (CG: SYstem)
Invalid CG OTV (CG; system)
baxtex said:
Okay, I'm gonna try that.
It finished and I got these messages:
Invalid CG OTV(CC: cdrom): Invalid SP Data
Invalid CG OTV(CC: system): Invalid SO Data
Invalid CG version (CG: SYstem)
Invalid CG OTV (CG; system)
Click to expand...
Click to collapse
Flash the ics fastboot using rsd lite and factory reset in stock recovery
Sent from my GT-I9300 using xda app-developers app
TheMrcool212 said:
Flash the ics fastboot using rsd lite and factory reset in stock recovery
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Tried that but the flashing process always fails after 2 seconds. Can't enter Recovery either.
baxtex said:
Tried that but the flashing process always fails after 2 seconds. Can't enter Recovery either.
Click to expand...
Click to collapse
make sure it says 'connected' in rsd lite. and also make sure you enter the AP Fastboot mode through the bootloader
Did as you said but it didn't make any difference. THough I have now tried al the fastboot files I curently have downloade, and one of them; p2b_spyder-umts_spyder-user-4.1.2-6.7.2_GC-384-402 actually made it to step 10 were it fails to flash "boot.img"
This was fastboot files for 4G version though.
baxtex said:
Did as you said but it didn't make any difference. THough I have now tried al the fastboot files I curently have downloade, and one of them; p2b_spyder-umts_spyder-user-4.1.2-6.7.2_GC-384-402 actually made it to step 10 were it fails to flash "boot.img"
This was fastboot files for 4G version though.
Click to expand...
Click to collapse
try to flash using this file
http://sbf.droid-developers.org/umt...SPDRICSRTGB_HWp2b_Service1FF_fastboot.xml.zip
i think it failed to flash 'boot.img' because you downloaded the wrong fastboot file, the 'boot.img' stands for the kernel
Nope, fails at the first step, "cdt.bin".
I think you have just update it to jelly bean, and you cant go back to ics since you have flashed the ROM. Now i understand why you got cdt.bin error. That means you cant go back to ICS
You can use this method
http://forum.xda-developers.com/showthread.php?t=2194825
But the problem is you can't root
Sent from my GT-I9300 using xda app-developers app
TheMrcool212 said:
I think you have just update it to jelly bean, and you cant go back to ics since you have flashed the ROM. Now i understand why you got cdt.bin error. That means you cant go back to ICS
You can use this method
http://forum.xda-developers.com/showthread.php?t=2194825
But the problem is you can't root
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I tried this but i can still not enter Recovery. However, I now get some other error codes:
Invalid CG OTV (CG: System): Invalid SP Data
Invalid CG Version (CG: system)
Invalid CG OTV (CG: system)
However, looked at the cmd window now, and it fails at system write beacuse of low battery. I have opend the phone and I am now charging it, I'm gonna leave it for 2 hours and then try again.
Edit:
Got enough battery, but got the same results as above.
I've just tryed to istall china and recieved a brix
What I did:
1) Installed BMM
2) Deleted CID
3) Installe kernel called boot_3.0.8-gfe5f639.img
4) Installed zip file "4.1.2 6.7.2_GC-384-SPDU-801.zip" from BMM
5) Rebooted
What I have now: phone dont want to boot system, its booting into fastboot with error "invalid CG version (CG: boot)".
After flashing JB Verizon kernel phone able to loading BMM, but its stuck on "... Booting" or stuck after this with black screen and red flash or rebooting.
Is it possible to install china firmware to xt912?
Seems like its impossible to install china firmware to xt912 due different ebr