I have been having problems getting a few different roms to work, Viper, CM10, etc.
I have the global version, is there a special rom or patch i can use?
leek04 said:
I have been having problems getting a few different roms to work, Viper, CM10, etc.
I have the global version, is there a special rom or patch i can use?
Click to expand...
Click to collapse
with CM 10.1 there is a GSM patch that you can flash that will enable apn settings i believe, and you also need to select the correct mobile networks settings... as for Viper im not entirly sure, i think if you select the T-mobile option in the aroma installer it will make it GSM compatable
also questions go in the "questions and answers" sub-forum, just for future reference
im pretty sure it was because i wasnt formatting system in recovery. worked fine once i got the tip to do that
Related
Hi all,
I am not able to get my photon connected to CDMA WS after flashing with CM9 RoM have tried with 0.5.2 and 0.6.0 and 0.6.1.
Have checked in device manager the correct port and CDMA WS connects to the port but not able to read from phone ?
Pl help.Due to this i am not not in a position to dump the new PRL update file / NV Dump file after flashing with new RoM
is this the first rom you flashed on your photon? if not i suggest going back to your previous rom or try another one i have experienced problems with cm9 also try aokp
OrAmerika said:
is this the first rom you flashed on your photon? if not i suggest going back to your previous rom or try another one i have experienced problems with cm9 also try aokp
Click to expand...
Click to collapse
Same issue was there when i flashed Roms using KS (tried CNA,CM9) and tried MUI Rom also still not use. But i was able to use it on stock RoM
If you are getting the force close upon the phone starting resulting in no service, this is normal with the ICS based roms. The last rebase joker did was on version 3.1. Installing anything after that only once will cause this issue. You can do one of three things to remedy this...
1: Use the Kitchen Sink Rom
2: Flash .3.1 first, then the latest version.
3: Flash the latest version, then immediately flash it again. Then install your gapps.
Also, make sure you have Jokers CWM.
Same issue
I was having the same issue, except right when my phone booted up it kept giving me the message that android.process.phone has stopped working, and it wouldn't let me connect to the mobile data network either.
Acvice said:
If you are getting the force close upon the phone starting resulting in no service, this is normal with the ICS based roms. The last rebase joker did was on version 3.1. Installing anything after that only once will cause this issue. You can do one of three things to remedy this...
1: Use the Kitchen Sink Rom
2: Flash .3.1 first, then the latest version.
3: Flash the latest version, then immediately flash it again. Then install your gapps.
Click to expand...
Click to collapse
Not able to find .3.1 can you pl direct me to the download site.
Akhileshjj said:
Not able to find .3.1 can you pl direct me to the download site.
Click to expand...
Click to collapse
It's in the CM9/MIUI fixes thread in the development section, one of the stickies by th3bill
Sent from the back of a MoPhoKing AOKP Unicorn
bullfrog527 said:
It's in the CM9/MIUI fixes thread in the development section, one of the stickies by th3bill
Sent from the back of a MoPhoKing AOKP Unicorn
Click to expand...
Click to collapse
thanks got it.
I just spent the last 6 hours figuring this out and go figure it would be in the Q&A section... Did a fresh stock flash, factory wipe, format cache, dalvik and system. Installed .3.1. Then ONLY wiped the dalvik cache and upgraded to the 6.1 i would stop getting the com.android.phone FC. If i did the factory wipe it would start FCing again.
cdma
akhilesh can you tell me how did you make the cdma work intially on your photon i tried all the methods told by farookhjii and it didnt work
sibin.mohan said:
akhilesh can you tell me how did you make the cdma work intially on your photon i tried all the methods told by farookhjii and it didnt work
Click to expand...
Click to collapse
are you asking about CDMA in india ?
I just flashed the latest version of Miui (v4 2.6.15) using the aroma installer but i cant connect to my network. I can see calls coming in but it says the process com.android.phone has stopped and i get a force close.
I edited the build.prop ro.telephony.default_network to 0 from 7 and i also did the *#*#4636#*#* and changed to gsm only but i get the same com.android.phone error .
Does anyone know a way to fix this cause Miui seems much better than the stock rom so far.
I am assuming you are international GSM?
Sent from my CM9 beast
Yeah, Im not in the us
Have you checked the CM9/MIUI fixes thread stickied in the Dev forum? Or the CM9/MIUI questions thread here. There may be a fix in one of those or the old MIUI thread that spleef had before th3bill took over
http://forum.xda-developers.com/showthread.php?t=1536161
[MIiui.us]MIUI/ICS port [unlocked] 5/19/2012
Sent from my CM9 beast
i tried the miui gsm fix from jokersax site and also the cm9 gsm fix but none of them worked.
did you flash the aroma version or the "normal" one? i think the aroma one has a gsm set up built into it. you shouldn't need any of the fixes as i think they are older for previous versions of MIUI/CM9
Thanks for the help bullfrog527 but i went back to stock cause i needed my phone working although i narrowed the problem down to the miui phone.apk .
Btw, do u know if there is anyway to dualboot so i can have a custom rom along with the stock?
No problem, wish I could have helped more. I don't think anyone has tried or is working on a dual boot, sorry
sent from my CM7 MoPho
if you are getting force close problem during an incoming call..go to rom manager and fix permissions..it will work.
Hasanb21 said:
Thanks for the help bullfrog527 but i went back to stock cause i needed my phone working although i narrowed the problem down to the miui phone.apk .
Btw, do u know if there is anyway to dualboot so i can have a custom rom along with the stock?
Click to expand...
Click to collapse
The Phone.apk is fine on the rom for GSM...honest. The issue is that you need to flash the rom, then the fix (before rebooting your phone for the first time). This sets your ro.telephony.default-network to 0(GSM)
the stock CDMA is 7
If you have an issue after that, in Dialer, punch in *#*#4636#*#* and go to Phone Info
Check that it's set to GSM auto or GSM only. If it's not, change it to one of those and reboot
Did a full wipe, installed the ROM, and rebooted. Everything works except for cellular data, anyone have any suggestions? It's on Sprint.
Nillanic said:
Did a full wipe, installed the ROM, and rebooted. Everything works except for cellular data, anyone have any suggestions? It's on Sprint.
Click to expand...
Click to collapse
Yeah, if you had searched the AOKP thread you would have found that this was an issue with Th3Bill's first release of the MS1 AOKP rom. you have to nandroid back to your last version of AOKP (always backup before flashing a new rom) and then re-install the NEW version he has up on GOO.
R2DeeTard said:
Yeah, if you had searched the AOKP thread you would have found that this was an issue with Th3Bill's first release of the MS1 AOKP rom. you have to nandroid back to your last version of AOKP (always backup before flashing a new rom) and then re-install the NEW version he has up on GOO.
Click to expand...
Click to collapse
Will it work if I flash the older version, since I don't have a backup of this specific rom, and then flash the newer one on top of that?
And which older version should I use?
If you flash an older version it will still have the borked radios. I think the only option you have at this point is to flash back to stock and start over.
Sent from my MB855 using xda premium
You don't need to go back to stock. Just flash the new rom that works. The updated rom is great. Use SMS Backup so you can keep your txt messages.
Sent from my MB855 using xda premium
first flash the rom whatever cm10 miui aopk
second flassh the gsm zip i uploaded
third flash gapps
fourth flash option chooser dont choose any of gsm or cdma
choose emmc or sdcard
choose not ussc fix and reboot
koushi2012 said:
first flash the rom whatever cm10 miui aopk
second flassh the gsm zip i uploaded
third flash gapps
fourth flash option chooser dont choose any of gsm or cdma
choose emmc or sdcard
choose not ussc fix and reboot
Click to expand...
Click to collapse
I flashed your GSM fix, and now I dont pick up any service on ANY rom, did full wipes, restores to known working roms, all that, and still no signal.
Mind you I think it has something to do with me being on Sprint in the US
HELP MEEEE
Did u wipe full..
if u belonged to sprint us then try miui which follows some special instructions while flashing sprint phones..,
ok, i unlocked my bootloader using adam's method .On beans rom 7, twrp installed ,working awesome added a couple mods but, my question is this now thats done can we really flash rom's from other us carriers? and, if we do will we have to flash the patch form SCOTTS,ROMS as a base or can we just flash entire rom with no additions ? I ask cause my i605 is set up for tmobile with global apn as, a system app thru titainium backup and is working fine with data but i would like to just go ahead and flash a tmobile rom but ,obviously dont wanna brick can anyone tell me if i can do this with out any issues and if i should expect issues what should i watch out for in a nut shell i want to just go with tmobile rom , not that theres anything wrong with my rom but would like a bit more choices ,NOT TO OFFEND ANY DEV'S of course. But could use a bit of direction i had seen ADAM'S post aboput but cant seem to get clairity on the subject thank you guys .i read to flash rom ,patch,kernel,then modenm , but if im not using verizon and deleted the ver. apns do i need to still in that order ,or at all
DAD12345 said:
ok, i unlocked my bootloader using adam's method .On beans rom 7, twrp installed ,working awesome added a couple mods but, my question is this now thats done can we really flash rom's from other us carriers? and, if we do will we have to flash the patch form SCOTTS,ROMS as a base or can we just flash entire rom with no additions ? I ask cause my i605 is set up for tmobile with global apn as, a system app thru titainium backup and is working fine with data but i would like to just go ahead and flash a tmobile rom but ,obviously dont wanna brick can anyone tell me if i can do this with out any issues and if i should expect issues what should i watch out for in a nut shell i want to just go with tmobile rom , not that theres anything wrong with my rom but would like a bit more choices ,NOT TO OFFEND ANY DEV'S of course. But could use a bit of direction i had seen ADAM'S post aboput but cant seem to get clairity on the subject thank you guys .i read to flash rom ,patch,kernel,then modenm , but if im not using verizon and deleted the ver. apns do i need to still in that order ,or at all
Click to expand...
Click to collapse
I'm on the Tmobile Jedi Rom with Saber Kernel and everything is fine.
Here's what you do:
put rom on SD Card
factory reset/wipe caches
install rom
install modem/radio
install Scott's patch
reboot
NOTE: It's recommended that you flash a Verzion kernel during the install. Even though Saber kernel is working, that doesn't mean that the other kernels from different carriers will work too.
Make sure that you DO NOT flash an International Note 2 rom. Stick with AT&T, Tmobile, and Sprint
ok where do i stick in the kernel
DroidOnRoids said:
I'm on the Tmobile Jedi Rom with Saber Kernel and everything is fine.
Here's what you do:
put rom on SD Card
factory reset/wipe caches
install rom
install modem/radio
install Scott's patch
reboot
NOTE: It's recommended that you flash a Verzion kernel during the install. Even though Saber kernel is working, that doesn't mean that the other kernels from different carriers will work too.
Make sure that you DO NOT flash an International Note 2 rom. Stick with AT&T, Tmobile, and Sprint
Click to expand...
Click to collapse
Ok thank you so do i install all in one flash, and which order do i put the kernel in in that sequence lol .. just super wanna make sure but thank you good s**t:good:
can i flash this to page plus and still flash other roms like cm10, aokp, miui and all those other guys
PLEASE HELP
?????Link missing?????
johnminator said:
can i flash this to page plus and still flash other roms like cm10, aokp, miui and all those other guys
PLEASE HELP
Click to expand...
Click to collapse
you meant the DNA as "this" ... yes you can flash it to Page Plus ( google it) PP only support 3G, CDMA so you can flash some ROMs no all
when you flash to PP it change the MEID, IMed etc.. so as long the Rom does not require any changes like APN setting or GSM Patches, it
will work ok. You will only need to flash VZW Roms in order to be supported on or by PP.
hope this help
Edit: The DNA have to be modified by the dealer, you will have to send the phone to them. U cant flash a 4G phone to PP through their Web Site.