Hi,
I recently updated from samsung ics to jellybean and it was working fine for a few days but now when i turn it on, it does not load past the booting screen''Samsung Galaxy S2 GT-I9100''
Could I have some help to how this can be sorted, I will try many different ways.
Thanks in advance.
Goto recovery and factory reset and wipe cache then reboot.
azharrahman said:
Hi,
I recently updated from samsung ics to jellybean and it was working fine for a few days but now when i turn it on, it does not load past the booting screen''Samsung Galaxy S2 GT-I9100''
Could I have some help to how this can be sorted, I will try many different ways.
Thanks in advance.
Click to expand...
Click to collapse
my friend u need to flash stock rom via odin..
just search a bit for the process.. if u cant find it.. just pm me or ask here itself
btw wrong section mate
---------- Post added at 06:31 PM ---------- Previous post was at 06:29 PM ----------
andrewwright said:
Goto recovery and factory reset and wipe cache then reboot.
Click to expand...
Click to collapse
never knew this would work for cases where phone wont go past bootscreen (m new to sammy) @op - try this first...
doctor_droid said:
my friend u need to flash stock rom via odin..
just search a bit for the process.. if u cant find it.. just pm me or ask here itself
btw wrong section mate
---------- Post added at 06:31 PM ---------- Previous post was at 06:29 PM ----------
never knew this would work for cases where phone wont go past bootscreen (m new to sammy) @op - try this first...
Click to expand...
Click to collapse
Hello again, could you explain how to flash stock rom via odin as i have no idea, thanks
Also, I am unable to get into recovery mode using the method of vol up+home button and power button, so have no idea what do
thanks
Search.
This has been covered here thousands of times over the past two years. If you have problems using Odin, search for Hopper8's 'Odin won't flash' thread.
azharrahman said:
Hello again, could you explain how to flash stock rom via odin as i have no idea
Click to expand...
Click to collapse
azharrahman said:
Hello again, could you explain how to flash stock rom via odin as i have no idea, thanks
Also, I am unable to get into recovery mode using the method of vol up+home button and power button, so have no idea what do
Click to expand...
Click to collapse
Check out this thread also:
Flash Stock Samsung JB/ICS firmware on I9100 for Noobs
samsung galaxy s2
Need some more advice,
As you know my phone is a samsung galaxy s2 gt 19100 and its not loading up to the main screen, but staying on the boot screen. I recently updated to jellybean from ics as well.
Entering recovery mode has not worked as using the combination of buttons doesn't work and i have used odin to reinstall jelly bean and downgade to ics again and that has not worked.
I desperately need my phone to work as it has all my stuff on it, is there anything else that i have not tried?
Thanks in advance.
Related
Hi guys
I tried to root my cousins sgs2, i tried the odin method where you flash the cf-root kernel which is the same as the one which your phone is already running, but it keeps failing :S hes on ics through kies, his kernel version is [email protected] 151 #3. model number is GT-I9100 and the android version is 4.0.3.
like i said this did not work, its the official Tmobile UK ICS update i think, and it kept failing. i then tried the root method without kernel it flashed CWM but it kept resetting every time i tried to choose 'flash zip from internal sd card' :S
i would say im pretty experiened with android rooting, ive owned a t mobile pulse, SGS1, and ive also flashed my friends HTC DesireHD all successfully
Anyone have any suggestions? or could i downgrade his firmware back to gingerbread then root that way?
thanks
When you say resetting, what does that mean.
Because when you get that touch cwm, you have to flash the busy box installer, and after that you are rooted. But you don't have cwm left for further use.
Sent from my GT-I9100 using Tapatalk 2
Why dont you use superoneclick? I used it and it worked and its easier.
Sent from my SGH-T959V using xda premium
h3dshot said:
Hi guys
I tried to root my cousins sgs2, i tried the odin method where you flash the cf-root kernel which is the same as the one which your phone is already running, but it keeps failing :S hes on ics through kies, his kernel version is [email protected] 151 #3. model number is GT-I9100 and the android version is 4.0.3.
like i said this did not work, its the official Tmobile UK ICS update i think, and it kept failing. i then tried the root method without kernel it flashed CWM but it kept resetting every time i tried to choose 'flash zip from internal sd card' :S
i would say im pretty experiened with android rooting, ive owned a t mobile pulse, SGS1, and ive also flashed my friends HTC DesireHD all successfully
Anyone have any suggestions? or could i downgrade his firmware back to gingerbread then root that way?
thanks
Click to expand...
Click to collapse
Try this rooting guide http://forum.xda-developers.com/showthread.php?t=1501719 , hop
It helps
coolstorybro_123 said:
Try this rooting guide http://forum.xda-developers.com/showthread.php?t=1501719 , hop
It helps
Click to expand...
Click to collapse
Hi thanks for the responses guys. To clarify a little bit o attempted the cf kernel method via odin bit it kept failing even.with both varieties of the correct kernel. I then attempted to do the recovery mode root whereby i flashed CWM which worked but when i scrolled down to flash a zip sd the power button would not select the.option. And every 3-5 seconds the CWM would return back to the start screen of CWM recovery in a loop every 3-5 seconds, so i was unable to flash superuser and busybox
The final option i believe is to try superoneclick but apparently it does not work for ics :/
Sent from my GT-I9000 using XDA
What phone u trying to root? I used it for galaxy s 4g. Sgh-t959v
Sent from my SGH-T959V using xda premium
Mekevin255 said:
What phone u trying to root? I used it for galaxy s 4g. Sgh-t959v
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
This particular forum is for the international Galaxy SII. (GT-I9100)
Galaxy S 4G forum is here.
ctomgee said:
This particular forum is for the international Galaxy SII. (GT-I9100)
Galaxy S 4G forum is here.
Click to expand...
Click to collapse
I know im helping him root his fone.
---------- Post added at 06:29 PM ---------- Previous post was at 06:18 PM ----------
Heres link: http://www.4shared.com/folder/tRT7B9lt/Super.html
Mekevin255 said:
I know im helping him root his fone.
---------- Post added at 06:29 PM ---------- Previous post was at 06:18 PM ----------
Heres link: http://www.4shared.com/folder/tRT7B9lt/Super.html
Click to expand...
Click to collapse
Hi there, so superoneclick worked for you on a stock ics? Im not sure what specific type it is but its definately i9100 and not a varient. For example i have a gt i9000 and i know theres varients sich as i9001
Sent from my GT-I9000 using XDA
http://forum.xda-developers.com/showthread.php?t=1103399
its noted that on both LPB kernels there are problems .
In which case i would try LP7 .
Or flash a different Samsung stock rom to LPB .
jje
i would say im pretty experiened with android rooting!
The way you're trying to root your cousins phone using CWM & SU.zip is just fine, "BUT" the reason your power button isn't selecting your zip files from your sd -card & keeps resettling CWM, is because that particular temporary CWM recovery is "TOUCH" & not BUTTON control! Try using your finger on the screen to select stuff rather than the volume & power bottons! & lastly, don't forget to put your CWM.zip & SU.zip files on an External SD-CARD & not your internal, otherwise CWM won't see them on your internal & it won't work
Click to expand...
Click to collapse
CrackDaddy said:
i would say im pretty experiened with android rooting!
The way you're trying to root your cousins phone using CWM & SU.zip is just fine, "BUT" the reason your power button isn't selecting your zip files from your sd -card & keeps resettling CWM, is because that particular temporary CWM recovery is "TOUCH" & not BUTTON control! Try using your finger on the screen to select stuff rather than the volume & power bottons! & lastly, don't forget to put your CWM.zip & SU.zip files on an External SD-CARD & not your internal, otherwise CWM won't see them on your internal & it won't work
Click to expand...
Click to collapse
hahaha shot myself in the foot! thanks ill give it a bash when i see him today
Click to expand...
Click to collapse
JJEgan said:
http://forum.xda-developers.com/showthread.php?t=1103399
its noted that on both LPB kernels there are problems .
In which case i would try LP7 .
Or flash a different Samsung stock rom to LPB .
jje
Click to expand...
Click to collapse
thanks and how would i go about doing that? just flashing through odin?
Yes as instructions via Odin .
jje
h3dshot said:
thanks and how would i go about doing that? just flashing through odin?
Click to expand...
Click to collapse
Once you're rooted you can install mobile odin from the market & use that! A lot safer & no yellow triangle or counter usage!
even if its touch cwm some buttons do work only for going back i used to press the back arrow....any ways post out m8 if u succeded
here u go
rocky23 said:
even if its touch cwm some buttons do work only for going back i used to press the back arrow....any ways post out m8 if u succeded
Click to expand...
Click to collapse
Touch cwm has a go back option as well!
Greetings guys
i have a big problem (i thinks)
i m using mr Faryaab SuperNexus Build 2 n Siyah Kernel (Siyah v1.5 beta6)
for no reason, thinking of revert back to stock rom
so i download the latest firmware from sammobile (BLH1)
flash with odin v3.04, everything seems ok until the phone boot
the phone cannot boot completely stuck in the samsung logo
whats i did wrong, i m still a noob n still learning...
thanks in advance...
zool80me said:
Greetings guys
i have a big problem (i thinks)
i m using mr Faryaab SuperNexus Build 2 n Siyah Kernel (Siyah v1.5 beta6)
for no reason, thinking of revert back to stock rom
so i download the latest firmware from sammobile (BLH1)
flash with odin v3.04, everything seems ok until the phone boot
the phone cannot boot completely stuck in the samsung logo
whats i did wrong, i m still a noob n still learning...
thanks in advance...
Click to expand...
Click to collapse
First of all this is the wrong section for posting this thread u should have posted it in general section
And do a full wipe by going into recovery by holding (volume up+ home+ power button) together............. and ur phone will boot up doing a full wipe
Sent from my GT-I9300 using xda app-developers app
sohail77 said:
First of all this is the wrong section for posting this thread u should have posted it in general section
And do a full wipe by going into recovery by holding (volume up+ home+ power button) together............. and ur phone will boot up doing a full wipe
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
sorry for the misplaced the tread, mr admins help please...
thanks it work, a new problms came tho
my data connection is not working, only wifi works
any idea...
what wrong actually, i followed all the steps, i even download the video
Try a newer build like xxdli4, best leak so far
Sent from my GT-I9300
---------- Post added at 10:03 PM ---------- Previous post was at 10:01 PM ----------
For data problems install modem, go to modem thread in general.
Sent from my GT-I9300
i used latest official firmware from sammobile
also with the modem
dont want the leak version
just want to change every things to stock
zool80me said:
i used latest official firmware from sammobile
also with the modem
dont want the leak version
just want to change every things to stock
Click to expand...
Click to collapse
Please report yourself to a mod via the report button in the |OP so this can be closed or moved .
jje
Hi All,
I've been really happy with my Galaxy S3 until I decided to flash a new Cyanogen Mod nightly build onto it. After the update my touchscreen stopped working but the soft buttons still work. I done a bit of reading on XDA and found it could be the digitizer that has faulted.
I've reflashed all the original ROM's and Firmware. When going into download mode in now reads
Customer Binary Download: Yes (4)
Current Binary: Samsung Official
System Status: Official
I want to take it back to Vodafone to see if they can repair it but I need to get the flash counter back to 0. I know Triangle Away can do this but as the screen doesn't work I can't get past the unlock screen once it turns on to install and use it.
Is there anyway to reset the flash counter without getting into the phone e.g. via Odin?
Any suggestion would be greatly appreciated.
I`m not 100% sure about this but you could try using an adapter and hooking up a usb mouse!
blooxx said:
I`m not 100% sure about this but you could try using an adapter and hooking up a usb mouse!
Click to expand...
Click to collapse
Thanks. I read that somewhere and am going to try that if there is no way to use Triangle Away without using the phone.
QUOTE=JaymzPhoenix;36213873]Thanks. I read that somewhere and am going to try that if there is no way to use Triangle Away without using the phone.[/QUOTE]
yes there is no other way as usb jig dont reset counter on s3 just use usb otg
try this guide it will help you
http://forum.xda-developers.com/showthread.php?t=2074756
please post back your result for future reference:fingers-crossed:
s3 after flashing kernel touch screen not responding
i just flashed a abyss kernel at galaxy s3 at omega rom and my touch screen is not responding?
atir usman butt said:
i just flashed a abyss kernel at galaxy s3 at omega rom and my touch screen is not responding?
Click to expand...
Click to collapse
Flash stock kernel another kernel factory reset read the faqs and guides .
jje
i falshed stock rom via odin ntng happnd still tocuscreen freezee plz help
---------- Post added at 06:34 PM ---------- Previous post was at 06:29 PM ----------
atir usman butt said:
i falshed stock rom via odin ntng happnd still tocuscreen freezee plz help
Click to expand...
Click to collapse
i try other bootloaders and kernel?
---------- Post added at 07:06 PM ---------- Previous post was at 06:34 PM ----------
atirusmanbutt my skype id plz help me
atir usman butt said:
i falshed stock rom via odin ntng happnd still tocuscreen freezee plz help
---------- Post added at 06:34 PM ---------- Previous post was at 06:29 PM ----------
i try other bootloaders and kernel?
---------- Post added at 07:06 PM ---------- Previous post was at 06:34 PM ----------
atirusmanbutt my skype id plz help me
Click to expand...
Click to collapse
No take it to a service centre you don't know what you are doing with bootloaders and kernels .
jje
i am very old user but frist happnd like that with me ,,,,,i used many kernals,,,,,,,can u plz help me wt is the reason abt that touchscreen not responding ntng happnd no drop etc just i was sit i thaught lets try other one kernel so i flashed abyss kernel at s3 from omega rom addons for s3 so after that my phone was also not going in recovery mode also,,,so i used stock rom after all that but still no change toch screen just like hang or freezee,,,,,,softkeys volume up down power button all working,,,
like this unknown error http://www.youtube.com/watch?v=ix4z905XDAE
Similar issue
Yes, exact same problem except my screen is stuck on the language screen. Is this a digitizer problem? Any help would be most appreciated!
Touch damaged by Traingle away
Hi,
I have a galaxy S3 Korean version (SHV-E210L). I wanted to reset flash counter and once i try to do it using traingle away V2.35, touch has got problems and now touch function is not working.
I have two questions.
1. I want to reset flash counter before i replace touch scree. So, can someone pls tell me the way for that. I can use mouse with OTG cable for access.
2. I want to know the difference between digitiser and front contact lens. Are these both same? Because i need to know this to order to fixed touch problem...
Thanks
Help! I've recently rooted my Samsung Galaxy Ace II GT-i8160. I flashed with Odin and rooted it. Then, I decided to install the new leaked Jelly Bean 4.1.2 ROM. I flashed it and realised that my phone was no longer rooted. I then flashed with Odin (the same exact way as before) but now, my phone doesn't boot. All it does is go to the screen with the words "Samsung Galaxy Ace 2 GT-i8160" and freezes. When I switch it off, it just boots itself again to that same exact screen. I can't go into Recovery mode as it only boots until that screen and freezes. However, I can go into Download mode. What should I do?
Have you try to flash Jelly Bean to your phone via ODIN again?
Nope, I'll try it now
tell me the result.
---------- Post added at 01:30 PM ---------- Previous post was at 01:24 PM ----------
actually, Gingerbread and Jelly Bean have different method to root the phone.
---------- Post added at 01:35 PM ---------- Previous post was at 01:30 PM ----------
1.Flash this KERNEL (Only For Jelly Bean)
2.Enter Recovery Mode
3.Flash this SuperSU.
And you have rooted Jelly Bean.
ddikodroid said:
tell me the result.
---------- Post added at 01:30 PM ---------- Previous post was at 01:24 PM ----------
actually, Gingerbread and Jelly Bean have different method to root the phone.
---------- Post added at 01:35 PM ---------- Previous post was at 01:30 PM ----------
1.Flash this KERNEL (Only For Jelly Bean)
2.Enter Recovery Mode
3.Flash this SuperSU.
And you have rooted Jelly Bean.
Click to expand...
Click to collapse
Actually now, all I want is to have my phone back in working condition. I don't really want to root anything anymore
My internet is really slow, so it will take awhile to redownload the JB ROM
you brick your phone because probably you go back to ginger with no the proper way.
Download and flash jelly bean mb4 leak.
if you don't use bluetooth download and flash this kernel http://forum.xda-developers.com/showpost.php?p=38542743&postcount=422
then root your device with this http://forum.xda-developers.com/showthread.php?t=2139263
@ddikodroid, OMG!! Thanks for the advice! Now my phone is in working condition! If you don't mind helping me out a little more, can you tell me if it is possible to revert my JB 4.1.2 update back to Gingerbread 2.3.6? And can you please explain to me a little more about how to root Jelly Bean Samsung Galaxy Ace II GT-i1860?
If not, thanks anyway! I feel like I owe you greatly! :]
Buddhism said:
Actually now, all I want is to have my phone back in working condition. I don't really want to root anything anymore
My internet is really slow, so it will take awhile to redownload the JB ROM
Click to expand...
Click to collapse
Buddhism I am having the same problem as you as i did what you did too! I hope you would be able to find a solution and share it with me. Thanks!
dareangelsxb said:
Buddhism I am having the same problem as you as i did what you did too! I hope you would be able to find a solution and share it with me. Thanks!
Click to expand...
Click to collapse
I followed what ddikodroid told me to do and flashed Jelly Bean back onto my phone via Odin. However, this is when I had Jelly Bean flashed before and tried to root my phone(using the Gingerbread method?). It might work for you, and it might not.
Buddhism said:
@ddikodroid, OMG!! Thanks for the advice! Now my phone is in working condition! If you don't mind helping me out a little more, can you tell me if it is possible to revert my JB 4.1.2 update back to Gingerbread 2.3.6? And can you please explain to me a little more about how to root Jelly Bean Samsung Galaxy Ace II GT-i1860?
If not, thanks anyway! I feel like I owe you greatly! :]
Click to expand...
Click to collapse
Can you please tell me the steps? I really have no idea what i should do and i really dont want to get a brand new phone
dareangelsxb said:
Can you please tell me the steps? I really have no idea what i should do and i really dont want to get a brand new phone
Click to expand...
Click to collapse
1. Follow these steps: http://reviews.cnet.co.uk/mobile-phones/how-to-root-the-samsung-galaxy-ace-2-50010296/
2. Download a Jelly Bean ROM from somewhere(around 500+MB) and flash it onto your rooted Samsung Galaxy Ace II GT-i8160.
3. Your phone should work again with Jelly Bean.
Buddhism said:
@ddikodroid, OMG!! Thanks for the advice! Now my phone is in working condition! If you don't mind helping me out a little more, can you tell me if it is possible to revert my JB 4.1.2 update back to Gingerbread 2.3.6? And can you please explain to me a little more about how to root Jelly Bean Samsung Galaxy Ace II GT-i1860?
If not, thanks anyway! I feel like I owe you greatly! :]
Click to expand...
Click to collapse
please press the THANKS button
If you want a gingerbread, you need to do this steps: http://d-h.st/AZN
1. Flash this firmware (it's Russian firmware)
2. After flash Russian firmware, you can flash your phone with your own firmware.
If you aren't flash Russian firmware, your phone will bootloop.
ddikodroid said:
please press the THANKS button
If you want a gingerbread, you need to do this steps: http://d-h.st/AZN
1. Flash this firmware (it's Russian firmware)
2. After flash Russian firmware, you can flash your phone with your own firmware.
If you aren't flash Russian firmware, your phone will bootloop.
Click to expand...
Click to collapse
@ddikodroid can you please tell me the steps to Root Ace 2 Jelly Bean 4.1.2 ?
dareangelsxb said:
@ddikodroid can you please tell me the steps to Root Ace 2 Jelly Bean 4.1.2 ?
Click to expand...
Click to collapse
Steps
1.Flash this KERNEL (Only For Jelly Bean)
2.Enter Recovery Mode
3.Flash this SuperSU.
And you have rooted Jelly Bean.
OR
You can use kyrillosv7B, it's a rooted Jelly Bean custom ROM
Press the THANKS button please
samsung galaxy ace 2 gt-s7560m brick
Hi there, i have kind of same issue, i have an ace II gt s7560m and i rooted it using odin method ones then i decide to install a custom rom (JellyCream2.0Messi10 which i found on one og the threads here) and i did a back up of my previous rom and when iwas done flashing the rom, i reboot it my phone got brick. However what the phone does is it boots up and shows the logo samsung gt s7560m and after that it shut down itself !!!! i have been trying to go into recovery mode (home+volume,up&down+power) and download mode (volume-down,home,power) the phone does exactly the same thing boot loops. it is going to download mode and i have tried almost evry method posted here. i used odin to flash the kernal again but the device is not turning on for that much time so that i can flash. please help !!!
This rom is for gt-i8160 and not for your device. So try downloading stock rom for s7560m and flash it with odin. Remember most stuff here is for gt-i8160 not for s7560m. Yes they both have the same commercial product name Galaxy Ace 2 but they are different devices.
@g0dzilla1
Are you aware that you flashed s7560m with the rom that was build for i8160? Why did you do that?
Those two phones are totally different in terms of hardware. I am afraid that you might have brick for good. Send your phone to local Samsung repair center without descibing what you did.
brick
ddikodroid said:
Have you try to flash Jelly Bean to your phone via ODIN again?
Click to expand...
Click to collapse
yes i tried that already... but when i connect my phone with the computer it starts looping. i mean turns on for few seconds and then turns off again and on the odin window , it detects the phone for only few seconds and then dissapiars.. and keeps looping like that !!! please suggest something ..
Service...
Sent from my GT-I8160 using Tapatalk 2
Odp: Help! 'Bricked' Galaxy Ace II
g0dzilla1 said:
yes i tried that already... but when i connect my phone with the computer it starts looping. i mean turns on for few seconds and then turns off again and on the odin window , it detects the phone for only few seconds and then dissapiars.. and keeps looping like that !!! please suggest something ..
Click to expand...
Click to collapse
Check your cable USB cable...
Sent from my Ace 2 using xda premium
I was busy trying to flash cm10.2 RC for my i9100 and ended up soft-bricking my phone. Not sure what happened, probably just me doing something stupid. If I recall the correct way to handle this is:
1)Find stock rom+kernel
2) install KIES on pc
3) flashing using ODIN in download mode
The problem is that I have no idea where to get the 4.1.1 stock rom and kernel from for my phone. I'm from Canada and using Virgin/Bell Mobile, so I tried looking up the CSC code and stuff. I stumbled upon http ://samsung-updates. com/device/?id=GT-I9100 (needed 10 posts and didnt want to just make random posts) but I have no idea which rom is the correct one. Would really appreciate some help with this (resources for stock roms+kernel) Could I use philz safe stock as a kernel? Christ I swear I used to know how to do all this.
Thanks in advance.
Which model number?
Akar007 said:
Which model number?
Click to expand...
Click to collapse
gt-i9100M
please verify that your model number is GT-I9300 by going to Settings->About->Model Number
Akar007 said:
please verify that your model number is GT-I9300 by going to Settings->About->Model Number
Click to expand...
Click to collapse
Ah.... I soft-bricked my phone meaning I cant get past the boot screen. Can't get to recovery mode or boot, only download mode. And my phone is not a glaxay s3 (i9300) its a i9100/i9100m, a galaxy s2 international edition.
Check out this thread, I am pretty sure you find answer here
http://forum.xda-developers.com/showthread.php?t=1193695
CAUTION: This thread is only for Canadian version.
---------- Post added at 09:50 AM ---------- Previous post was at 09:26 AM ----------
If you find answer , tell me
1kon said:
I was busy trying to flash cm10.2 RC for my i9100 and ended up soft-bricking my phone. Not sure what happened, probably just me doing something stupid. If I recall the correct way to handle this is:
1)Find stock rom+kernel
2) install KIES on pc
3) flashing using ODIN in download mode
The problem is that I have no idea where to get the 4.1.1 stock rom and kernel from for my phone. I'm from Canada and using Virgin/Bell Mobile, so I tried looking up the CSC code and stuff. I stumbled upon http ://samsung-updates. com/device/?id=GT-I9100 (needed 10 posts and didnt want to just make random posts) but I have no idea which rom is the correct one. Would really appreciate some help with this (resources for stock roms+kernel) Could I use philz safe stock as a kernel? Christ I swear I used to know how to do all this.
Thanks in advance.
Click to expand...
Click to collapse
I'm not sure what you flashed because the international Galaxy S2 hasn't received any CM10.2 RC builds
Bleeding-Edge-Armour said:
I'm not sure what you flashed because the international Galaxy S2 hasn't received any CM10.2 RC builds
Click to expand...
Click to collapse
yeah, my bad it turned out to be a nighty. I didnt read the list properly. lol
Akar007 said:
Check out this thread, I am pretty sure you find answer here
http://forum.xda-developers.com/showthread.php?t=1193695
CAUTION: This thread is only for Canadian version.
---------- Post added at 09:50 AM ---------- Previous post was at 09:26 AM ----------
If you find answer , tell me
Click to expand...
Click to collapse
So I used the link you gave me to get it to GB stock rom+kernel (since I read intratechs stuff might not work). Then using KIES I got to 4.1.2. AT that point my firmware info changed from PDA:KG2/PHONE:KG2/CSC:KG2 (BMC) to PDA:MA5/PHONE:MA5/CSC:MA5(BMC). No idea what that means. Went to http://forum.xda-developers. com/showthread.php?t=1103399 to grab a rooted kernel with cwm. Then my phone just gets stuck in a boot loop or fails to launch. Tried siyah kernels v2 and v3, they fail (boot loops). Dorimanx just causes my phone to freeze midway between the samsung screen animation and the warning triangle.
Basically, Im stuck right now only being able to boot successfully to stock 4.1.2 un rooted. Any idea where to head from there?
1kon said:
So I used the link you gave me to get it to GB stock rom+kernel (since I read intratechs stuff might not work). Then using KIES I got to 4.1.2. AT that point my firmware info changed from PDA:KG2/PHONE:KG2/CSC:KG2 (BMC) to PDA:MA5/PHONE:MA5/CSC:MA5(BMC). No idea what that means. Went to http://forum.xda-developers. com/showthread.php?t=1103399 to grab a rooted kernel with cwm. Then my phone just gets stuck in a boot loop or fails to launch. Tried siyah kernels v2 and v3, they fail (boot loops). Dorimanx just causes my phone to freeze midway between the samsung screen animation and the warning triangle.
Basically, Im stuck right now only being able to boot successfully to stock 4.1.2 un rooted. Any idea where to head from there?
Click to expand...
Click to collapse
So i would guess you want to get back onto a custom rom like CM? Just flash this version of dorimanx on your phone via odin and it should boot, 8.43 for samsung based roms you must use those that start with 8, e.g. 8.43 or 8.41 etc... Once you flash it you can now boot into CWM recovery and install CM as you always had.
NVm, kinda got it working on SlimBean with a CWM 6.0 kernel. Thanks for all the help from the XDA community.