Hello everyone
A friend with SGS SIII I9300 asked me if can help him to have a smooth device like my sgsa gt i9070.
The forum for the sIII is a lot bigger and more complex than the sgsa forum and I`m kinda lost so I dont know where to post my question as i didnt find a Q&A general thread.
I think that rooting,flashing a custom kernel and set a governer and a scheduler would do the trick as he is new to android.
Can someone point me some thread links in order to achieve my goal?
Thank you all in advance
7RA13 said:
Hello everyone
A friend with SGS SIII I9300 asked me if can help him to have a smooth device like my sgsa gt i9070.
The forum for the sIII is a lot bigger and more complex than the sgsa forum and I`m kinda lost so I dont know where to post my question as i didnt find a Q&A general thread.
I think that rooting,flashing a custom kernel and set a governer and a scheduler would do the trick as he is new to android.
Can someone point me some thread links in order to achieve my goal?
Thank you all in advance
Click to expand...
Click to collapse
GENERAL
Stickied faqs and guides
This is Q&A thread for I9300 .
jje
JJEgan said:
GENERAL
Stickied faqs and guides
This is Q&A thread for I9300 .
jje
Click to expand...
Click to collapse
It was a question about I9300. I was asking for some help about rooting, kernels of this device. Some links to threads would be enough for me to start.
Thx in advance
Sent from my GT-I9070 using xda app-developers app
7RA13 said:
It was a question about I9300. I was asking for some help about rooting, kernels of this device. Some links to threads would be enough for me to start.
Thx in advance
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Just go to General > Sticky roll-up. ALL the important threads are there
7RA13 said:
Hello everyone
A friend with SGS SIII I9300 asked me if can help him to have a smooth device like my sgsa gt i9070.
The forum for the sIII is a lot bigger and more complex than the sgsa forum and I`m kinda lost so I dont know where to post my question as i didnt find a Q&A general thread.
I think that rooting,flashing a custom kernel and set a governer and a scheduler would do the trick as he is new to android.
Can someone point me some thread links in order to achieve my goal?
Thank you all in advance
Click to expand...
Click to collapse
For rooting the galaxy s3 you can follow the instructions provided in my website: http://goo.gl/RH2zWV
the procedure explained in above post works only for the International version of samsung galaxy s3..
For installing a custom rom, you can choose CyanogenMod 10.2(android 4.3)... To flash CyanogenMod Download the CyanogenMod rom from below link:
CyanogenMod 10.1.3 (Android 4.2) : http://download.cyanogenmod.org/get/jenkins/42508/cm-10.1.3-i9300.zip
CyanogenMod 10.2 (Android 4.3) : http://download.cyanogenmod.org/get/jenkins/43342/cm-10.2-20131001-NIGHTLY-i9300.zip
If you want to flash Android 4.2, download CyanogenMod 10.1.3 else if you want to flash Android 4.3 Download CM 10.2 from the link above.
You will also need to download the Gapps. Download it from the link below:
http://goo.im/gapps/gapps-jb-20130813-signed.zip
After the download finishes follow the steps given below:
1. Place the CyanogenMod rom .zip and the gapps .zip file on the root of the SD card
2. Boot to recovery mode on the device by holding Home & Volume Up & Power.
3. Once the device boots into the ClockworkMod Recovery, use the physical volume buttons to move up and down and home button to choose the option selected.
4. You can create a backup of the current installation on the device by selecting backup and restore option but this is optional, you can skip this step but it would be better to create a backup for if anything goes wrong.
5. Select the option to wipe data/factory reset.
6. Select install zip from sdcard.
7. Select choose zip from sdcard.
8. Select the CyanogenMod file you placed on the sdcard. You will then need to confirm that you do wish to flash this file. ( this step may take some time)
9. Again follow the steps 6 & 7 and after that select the Gapps file you placed on the sdcard. You will then need to confirm that you do wish to flash this file.
10. Once the installation has finished, return back to the main menu, and select the reboot system now option. The device should now boot into CyanogenMod.
suyash1629 said:
For rooting the galaxy s3 you can follow the instructions provided in my website: http://goo.gl/RH2zWV
the procedure explained in above post works only for the International version of samsung galaxy s3..
For installing a custom rom, you can choose CyanogenMod 10.2(android 4.3)... To flash CyanogenMod Download the CyanogenMod rom from below link:
CyanogenMod 10.1.3 (Android 4.2) : http://download.cyanogenmod.org/get/jenkins/42508/cm-10.1.3-i9300.zip
CyanogenMod 10.2 (Android 4.3) : http://download.cyanogenmod.org/get/jenkins/43342/cm-10.2-20131001-NIGHTLY-i9300.zip
If you want to flash Android 4.2, download CyanogenMod 10.1.3 else if you want to flash Android 4.3 Download CM 10.2 from the link above.
You will also need to download the Gapps. Download it from the link below:
http://goo.im/gapps/gapps-jb-20130813-signed.zip
After the download finishes follow the steps given below:
1. Place the CyanogenMod rom .zip and the gapps .zip file on the root of the SD card
2. Boot to recovery mode on the device by holding Home & Volume Up & Power.
3. Once the device boots into the ClockworkMod Recovery, use the physical volume buttons to move up and down and home button to choose the option selected.
4. You can create a backup of the current installation on the device by selecting backup and restore option but this is optional, you can skip this step but it would be better to create a backup for if anything goes wrong.
5. Select the option to wipe data/factory reset.
6. Select install zip from sdcard.
7. Select choose zip from sdcard.
8. Select the CyanogenMod file you placed on the sdcard. You will then need to confirm that you do wish to flash this file. ( this step may take some time)
9. Again follow the steps 6 & 7 and after that select the Gapps file you placed on the sdcard. You will then need to confirm that you do wish to flash this file.
10. Once the installation has finished, return back to the main menu, and select the reboot system now option. The device should now boot into CyanogenMod.
Click to expand...
Click to collapse
Thank you for your kindness and patience and for the fast reply I was kinda confused and lost in the I9300 forum so that's why I asked for help. Thank you again you made me a big favour, I just cant thk you enough
Sent from my GT-I9070 using xda app-developers app
7RA13 said:
Thank you for your kindness and patience and for the fast reply I was kinda confused and lost in the I9300 forum so that's why I asked for help. Thank you again you made me a big favour, I just cant thk you enough
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
If you want to thank you can hit the thanks button..
Related
I have done these works :
1. Removed full battery notification
2. Installed supercurio kernel
3. Removed touchwiz launcher (replaced with the stock gingerbread of the nexus s 9020)
4. Removed all Samsung stuff (unuseful) except voice commands and dlna.
Now i would share this with all the comunity, but how i can do this ?
(i can't do a nandroid backup because clockworkmod isn't avaible).
Please, help me, this phone it's terrible with all samsung customization!
Think you should have posted this in Q&A
stoney73 said:
Think you should have posted this in Q&A
Click to expand...
Click to collapse
Thanks! I do this immediatly
kawa636r said:
Thanks! I do this immediatly
Click to expand...
Click to collapse
do you have the final product file in .zip format or .tar format ???
if its in the latter format, we can flash this file using ODIN as PDA......
otherwise i think its difficult without a custom recovery..... waiting for Supercurio .....
? .
What?
Sent from my GT-P7510 using XDA Premium HD app
The first thing you need to do in general, is to not post questions in development.
The second thing is to read the first page of the threads and use Google for stuff like "what is gapps".
Now concerning your question: Cyanogenmod roms don't include apps like gmail, Google music, etc. These apps are called gapps (google apps!!!). Flash the gapps.zip provided with the rom, if you want these apps (usually it is found on the first page of the Rom thread).
Sent from my amazing 10.1 galaxy tab
Panos_dm said:
The first thing you need to do in general, is to not post questions in development.
The second thing is to read the first page of the threads and use Google for stuff like "what is gapps".
Now concerning your question: Cyanogenmod roms don't include apps like gmail, Google music, etc. These apps are called gapps (google apps!!!). Flash the gapps.zip provided with the rom, if you want these apps (usually it is found on the first page of the Rom thread).
Sent from my amazing 10.1 galaxy tab
Click to expand...
Click to collapse
what i need to do whit this : gapps-ics-20120304-signed.zip ? .
ishay_maimon said:
what i need to do whit this : gapps-ics-20120304-signed.zip ? .
Click to expand...
Click to collapse
If you have a version of cm9/ics installed then flash it from recovery. The same way you installed the rom...
Sent from my amazing 10.1 galaxy tab
ishay_maimon said:
what i need to do whit this : gapps-ics-20120304-signed.zip ? .
Click to expand...
Click to collapse
Do you know what cwm recovery is?
Are you planning on flashing CyanogenMod?
Sent from my SPH-D710 using xda premium
rickyq12 said:
Do you know what cwm recovery is?
Are you planning on flashing CyanogenMod?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
i have 2 file :
1 : update-cm-9-20120512-NIGHTLY-p4wifi-signed.zip
and
2 : gapps-ics-20120304-signed.zip
i dont have a cm9 or rom of ics what i need to do, to install the all file or only one ( 1 )
? .
As rickyq12 said do you know what cwm is? Do you have it? How about rooting? Are you even familiar with flashing roms? If not then start here:
http://forum.xda-developers.com/showthread.php?p=15693193.
If you do know about cwm or if you have it then I believe you know how it works. Flash ics first, reboot and then boot into cwm again and flash gapps. If you find it really difficult then maybe it is best to leave it for now. Just do some reading in Google and come back here. These tabs are really hard to brick but you should at least understand the basics in order to avoid any trouble. Oh and official ics is around the corner...
Sent from my GT-P7500 using XDA
Dude if u have to ask what cwm is should u really be flashing?
Sent from my GT-N7000 using xda premium
One last thing: what device do you have? This is a galaxy tab forum. Your signature says you have the note...
sent from my nokia 3210
Wrong section
Correct section= Galaxy Tab 10.1 Q&A
Here:
1) connect the USB cord to your tablet and computer.
2) Open ODIN on your computer
3) hold down power and Volume Up and until the tablet turns on. Select Download (use the volume keys).
3) Now, on your computer, open one of those files you mentioned with notepad. Add this line "234 init Q+A XDA" on the 4th or 5th line (doesn't really matter, add it anywhere except the beginning or end).
4) Flash that file to the tablet with ODIN. Wait a while; it will take a long time (up to 24 hours). When the screen flashes, immediately press the power button and hold it. That's when you'll see the magic happen!
Take a video of yourself doing this. If something goes wrong, post it here so we can help.
slack04 said:
Here:
1) connect the USB cord to your tablet and computer.
2) Open ODIN on your computer
3) hold down power and Volume Up and until the tablet turns on. Select Download (use the volume keys).
3) Now, on your computer, open one of those files you mentioned with notepad. Add this line "234 init Q+A XDA" on the 4th or 5th line (doesn't really matter, add it anywhere except the beginning or end).
4) Flash that file to the tablet with ODIN. Wait a while; it will take a long time (up to 24 hours). When the screen flashes, immediately press the power button and hold it. That's when you'll see the magic happen!
Take a video of yourself doing this. If something goes wrong, post it here so we can help.
Click to expand...
Click to collapse
L M F A O...maybe we should make a "fail thread" with links to posts like this...
sent from my nokia 3210
ishay_maimon said:
? .
Click to expand...
Click to collapse
Amazing rom dude, awesome work, i just flashed it and now even camera works on ICS.
Actually, shouldn't he be in a Galaxy Note Section, somewhere??
I have Samsung galaxy note and Samsung galaxy tab 10 . 1
wow, even sarcasm zip right by...
ishay_maimon said:
I have Samsung galaxy note and Samsung galaxy tab 10 . 1
Click to expand...
Click to collapse
Remove the micro sd card from your Galaxy Tab, then you can install the gapps.
Just be careful so that you don't accidentally the whole thing.
Hi All
Just finished compiling the Original Samsung 4.1.2 test firmware for CWM flashing
No changes has been made at all except Root that has been added and everything being DEODEXED
Its being uploaded atm to my Google Drive account so it should be easier to download and I will post the link as soon as its up and shared.
Please be aware of the following:
1. This is completely stock with the stock kernel that has the brick bug in it SO DON'T FORMAT EMMC AFTER YOU INSTALL IT
2. It will remove CMW and CMW needs to be installed again with Mobile odin or Odin pc.
Installation should be as per any other CWM rom:
1. Copy to SD card
2. Wipe data/factory
3. Install from the SD
4. Clear Dalvic and reboot
If you want to move away from this rom follow the following steps just to be save:
1. Use mobile odin or Odin pc to install CMW
2. Flash any other kernel like Siyah or similar
3. Do a EMMC format - ONLY AFTER STEP 2. Please dont forget to flash a non brickbug kernel 1st
4. Install other rom as desired
Download Link:
http://forum.xda-developers.com/showthread.php?t=1998205
Thanks to LegendK for eventually finding the way
Additional Installs:
Philz Kernel removing Brick bug - Flash it through recovery mode
Philz Kernel removing Brick bug - Flash through Odin
Thanks PhilZ
Additional Notes:
After installing the Rom please install one of the "Additional Installs" kernels to remove the brick bug. Once done use Rom as usual
good job
toxicdust said:
Original Samsung 4.1.2 test firmware for CWM flashing
Click to expand...
Click to collapse
Much obliged, I'm super keen to try this new version, only drama I'm a bit n00b-ish when it comes to creating a CWM-flashable ZIP from what we can grab from SamFirmwares and I'd prefer to be able to hack the apk's and Media folder before I throw it into my i9100. Looking forward to getting hold of what you've cooked up...
ADD: Oh yeh, from what I've heard, the Philz-CWM6 kernel is supposed to be the best for this F/W, check out his thread...
Code:
http://forum.xda-developers.com/showthread.php?t=1877270
looks good!!!!
Hope you can repack it with the PhilZ kernel(no eMMC brick bug) if there is time! You would save a lot of n00bs breaking their device! Just my 2 cents!
Orr.Penn.18 said:
Hope you can repack it with the PhilZ kernel(no eMMC brick bug) if there is time! You would save a lot of n00bs breaking their device! Just my 2 cents!
Click to expand...
Click to collapse
+1000
Gesendet von meinem GT-I9100 mit Tapatalk 2
how did u make the zip?
when i pulled /system and kernel it gave me a boot loop
Well done and thank you! I'm DLing when its up!
awesome!!!!!!!!!!!!!!!!!!!!!!!!!
iamnotkurtcobain said:
+1000
Click to expand...
Click to collapse
+1001
Orr.Penn.18 said:
Hope you can repack it with the PhilZ kernel(no eMMC brick bug) if there is time! You would save a lot of n00bs breaking their device! Just my 2 cents!
Click to expand...
Click to collapse
but pls upload current version for ppl who really need it in shortest time.
Its up
Will repack with the Phillz kernel as well and replace once done
toxicdust said:
Its up
Will repack with the Phillz kernel as well and replace once done
Click to expand...
Click to collapse
“You need permission to access this item.
You are signed in as *************@gmail.com, but you don't have permission to access this item. You can request access from the owner or choose a different account. Learn more”
Same problem
Give me te permission PLEASE
al*****[email protected]
permission error .!!! plz fix it
@toxicdust Can you please also upload a 180DPI dialer and TWlauncher ?
Im sure everybody would LOVE that
Thanks a lot and great job
LOL ... sorry about that. Should be open now
Ok the Philz kernel works without problems that I can see atm.
Will repack with that as well for the noob friendly version.
Others can just install his kernel from recovery mode to be on the safe side
Philz kernel available from link below, and don't forget to say Thanks...
Code:
http://forum.xda-developers.com/showpost.php?p=31310650&postcount=1
djshotty said:
Philz kernel available from link below, and don't forget to say Thanks...
Code:
http://forum.xda-developers.com/showpost.php?p=31310650&postcount=1
Click to expand...
Click to collapse
Linked the correct ones to use in the OP so that ppl don't get confused with the so many he has and by accident install the wrong one.
i downloaded 155MB FILE http://get.cm/?device=i9100 1st one .. now please guide me how to install this .. should i download any more files. point me to direct thread .. please i dont know whether it is experimental or stable version ..please help .. i am currently on Omega V17 . kernel - philz
Find the CM10 discussion thread in General (I'm not linking you to it because A) I don't have a link handy and B) You're perfectly capable of finding it yourself given it's more than likely on the first page), and follow the install instructions on the first page of that thread to the letter. If you're unable to follow those, I'd question the wisdom of you attempting to flash CM10 in the first place (the instructions couldn't be more simple).
MistahBungle said:
Find the CM10 discussion thread in General (I'm not linking you to it because A) I don't have a link handy and B) You're perfectly capable of finding it yourself given it's more than likely on the first page), and follow the install instructions on the first page of that thread to the letter. If you're unable to follow those, I'd question the wisdom of you attempting to flash CM10 in the first place (the instructions couldn't be more simple).
Click to expand...
Click to collapse
i found it in general discussion thread. but i shld download one more file gapps ..http://goo.im/gapps which one shld i download . 4.2.1 or 4.1.x ... confused wit these two.. hope this is right question
mapps563 said:
i found it in general discussion thread. but i shld download one more file gapps ..http://goo.im/gapps which one shld i download . 4.2.1 or 4.1.x ... confused wit these two.. hope this is right question
Click to expand...
Click to collapse
use the 4.2.1 gapps, thats the one for CM10.1
Sun90 said:
use the 4.2.1 gapps, thats the one for CM10.1
Click to expand...
Click to collapse
Okie i downloaded and flashed everything is fine and clean and normal but the notification bar is empty .. Cant i make it look like jelly bean .. 13 notifications bar .. please reply
mapps563 said:
Okie i downloaded and flashed everything is fine and clean and normal but the notification bar is empty .. Cant i make it look like jelly bean .. 13 notifications bar .. please reply
Click to expand...
Click to collapse
No. In CM10.1 you need to press the top right button to bring up the toggles like in stock 4.2.1.
if you want old style CM toggles you will need to flash CM10.0, In that you can set which toggles you want on top row in settings.
If you want sammy style toggles you will need to flash a sammy based rom.
TheATHEiST said:
No. In CM10.1 you need to press the top right button to bring up the toggles like in stock 4.2.1.
if you want old style CM toggles you will need to flash CM10.0, In that you can set which toggles you want on top row in settings.
If you want sammy style toggles you will need to flash a sammy based rom.
Click to expand...
Click to collapse
In CM 10.1 there's no scroll infinetly in home screen . it annoys .. if i am at the last drawer cant i go to 1st drawer .. there is no option..
Show
http://forum.xda-developers.com/showthread.php?t=2717521
That is jelly bean 4.1 just build.prop has been modified to make it look like 4.4.2
gutolopes.com said:
Show
http://forum.xda-developers.com/showthread.php?t=2717521
Click to expand...
Click to collapse
i am not being rude but
Man seriously plesae please read the previous post than think for an hour than post that we have update half threads are that we have 4.2 or not
+ this i wrong thread
Sorry
ZANKRUT.DOSHI said:
That is jelly bean 4.1 just build.prop has been modified to make it look like 4.4.2
Click to expand...
Click to collapse
true friend, when he had not explored posted here
Came here to say to me to read up?
lols21.10 said:
i am not being rude but
Man seriously plesae please read the previous post than think for an hour than post that we have update half threads are that we have 4.2 or not
+ this i wrong thread
Click to expand...
Click to collapse
Unnecessary their approach.
Hugs to all.
If there's time today still put my Private Rom I use here. Comes with adobe flash player, Link2SD, S Voice in the native language, clean master, etc ...
Sorry my english
has anyone tried it??
Hiiii
My rom salad, enjoy.
In my flog has instructions
http://flogvip.net/gutolopes/16011399/
Hugs and feel free to change the salad.
Extra features:
S Voice
Link2SD
Clean Master
Triangle Away
Audio FX
Google Camera
Adobe Flash Player 11 (Install APK)
How to install:
1> You must have CWM Recovery.
2> Put "WINDI8552GutoLopes.zip" file on the external sd.
3> Boot into CWM Recovery mode (VOL UP + HOME + POWER), when chatter release Power button.
4> wipe data / factory reset.
5> Wipe Cache partition.
6> Install zip> Choose WINDI8552GutoLopeszip.
7> Wait until it finishes.
8> Reboot> Reboot Sistem Now
9> Configure Keyboard bills and enjoy
10> After all procedures install adobe flash player
Rom stable and very fast.
Thanks to all of the forum
nop
its not 4.4 its just 4.1.2 with s4 like theme
gody420 said:
its not 4.4 its just 4.1.2 with s4 like theme
Click to expand...
Click to collapse
I said I made a 4.4 rom?
Read carefully.
If you come to add is welcome.
This is a Rom 4.1.2, there is not even a 4.2
for our device.
baseband version: I8552BUBUANA1