[Q] Cyanogenmod 10.2 Phone Wakeup Slow - AT&T HTC One (M7)

I recently install CM 10.2 Nightlies on my HTC One. I noticed that when the phone goes to sleep or I lock it and hit the unlock button, it takes a few seconds before the screen turns on. Is anyone else having this issue? Anyone know what the issue is?

Yes I do. For some reason I don't hear this bug mentioned often. Maybe it's not widespread.

Yes it's a known adb widespread issue that is often talked about in the cm thread but I believe it has been patched , but I don't know if the changes got merged yet
Sent from my HTC One using Tapatalk 4

smac7 said:
Yes I do. For some reason I don't hear this bug mentioned often. Maybe it's not widespread.
Click to expand...
Click to collapse
Lol are you being sarcastic
Sent from my HTC One using Tapatalk 4

I have the same problem with my HTC one. I have installed 2 different versions of the nightlies (20130927 & 20130928) and had the Problem with both.
Before CM 10.2 I had the Vanilla Android on my device. With that i had no wake up delay.

Same on Xperia Ray
Hi,
I'm on SE Xperia Ray (urushi) with nightly 20130918 and experiencing the same issue.
Look's like it's related to some memory management or "deep sleep" state, because the respone time is
fine as long as the delay between lock/"turn off display" and unlock/"push power button" is within seconds.
Toby

Fixed it
Hey guys,
Just had the same problem with my Nexus 4 running CM 11-20140308-SNAPSHOT-M4-mako.
What fixed it for me was turning Settings/Security/Automatically Lock to Immediately, instead of a delay.
Thanks for the tip, streumix!

Related

[Q] Why is my folio 100 wakes up regularly ?

With my folio 100 with an updated Dexter ROM (1.4*), it wakes up regularly (I would say about each 15 minutes). This make the battery life VERY short.
Does anyone have the same problem?
Does anyone have a solution for that purpose?
Best regards.
RaiFolio
Looks like it´s a nvidia problem, i have the same issue every now and then.
Response from dexter:
its a hardware bug, see Nvidia site on harmony development boards and tango.. they confirm they did not fix the issue.
Im having that problem too, so we currently dont have any solution?
Sent from my Folio 100 using XDA Premium App
nightmarept said:
Looks like it´s a nvidia problem, i have the same issue every now and then.
Response from dexter:
its a hardware bug, see Nvidia site on harmony development boards and tango.. they confirm they did not fix the issue.
Click to expand...
Click to collapse
I am not fully convinced that it is a hardware problem. My folio wakes up with all roms that are based on the stock rom. But I did not have a single wakeup with CM7.
I would rather blame the Nvidia drivers (ressource manager?) than the hardware itself for the wakeup bug (except that it may be that the wakeup is a dirty workaround for another hardware problem).
Hello,
I also had that problem at first, then I went in the wifi settings, pressed the menu button to bring up advanced seetings, set the wifi sleep policy to never and then disabled wifi and gps in the Location & security settings.
That seemed to work for me, it might not work for others...
Regards,
Luis
Thanks Nyaria, i will try today if that works
Sent from my HTC Hero using XDA Premium App
I'll try it too.
Didnt work
Sent from my Folio 100 using XDA Premium App
Ok, I also removed a lot of apps that I don't need, I'll make a list of what's remaining and maybe the problem is with just one app.
I just finished a standby test with Foliomod 1.4 and got near 30 hours of standby with light email usage... not bad
Regards,
Luis
hello
for the problem of waking up the solution is to leave the wifi constantly under foliomod 1.4
if your portfolio suffers from freezing after waking up to SetCPU mini max 1000 604
but also
I have tried the ROM Mblaster very very very good work fluid
The main problem is that the wifi does not reconect
J So I installed the second version of max 1000
It is less fluid, but the wifi works well, but back then SOD j've given SetCPU mini max 1000 and 604 more problem
If you can solve the problem of wifi I am ready to test because my portfolio suffers whenever SOD
thank you for your very good work
sod negative return
ROM handed CyanogenMod 7.0.0 Oc 1500 with a 1000 SetCPU
and shutdownquick
can it be the folio buttons?
with my folio the screen wake's up and the search button flashes.
also wen i am working with it then the google search pops up
i tried deinstall the google search app but no effect on my broblem.
sorry for the bad english hope you guys can read it
I'm so thankful for this thread, cos the wifi advanced setting trick has worked for me!
my foliomod kept turning itself on every 60 secs (can you believe it), after it turned it off, and it was irritating me no end. now it stays off once i set the wifi policy to never.
thanks!
After few month there isn't solution for it ?
I think that problems is that folio search wifi network on every x seconds. That can be changed in build.prop file.
Sent from my IDEOS S7 Slim using XDA App
Jon2555 said:
I think that problems is that folio search wifi network on every x seconds. That can be changed in build.prop file.
Sent from my IDEOS S7 Slim using XDA App
Click to expand...
Click to collapse
I tried to turn off wifi but nothing change.
Try PowerSwitch app
Sent from my IDEOS S7 Slim using XDA App
Jon2555 said:
Try PowerSwitch app
Sent from my IDEOS S7 Slim using XDA App
Click to expand...
Click to collapse
Just installed, i try it!
stex_80 said:
Just installed, i try it!
Click to expand...
Click to collapse
No good, same result,... have you a best software setting to suggest me?
Turn on acceleration sensor and lock app in memory. When Folio screen turn on, after ten seconds it will turn off
Sent from my Xoom using Tapatalk
I had this issue with the honeycomb rom, v0.4 , turning back to foliomod 1.4 now all work good, but i can't turn off wi-fi during the screen-off, cause the wi-fi took a lot of time to take the network. I noticed that with honeycomb the "back" button was glowing and then the screen power up in lock state...maybe the problem could be folio button...

[Q] Proximity sensor always enabled

I have been using my S2 since the beginning of February 2012 and have not noticed at any time other than when making calls that the proximity sensor was activated (dull red glow). Just last night I noticed that the sensor seems to be activated all the time now, screen on, calling, whatever...
It of course turns off when the S2 is turned off. When booting back up it does not get enabled again until the end of media scanning.
Any ideas how to check which app or process is enabling this when it is not necessary nor wanted?
Shameless bump. Surely somebody has an idea what variable is involved or what program I can use to change the behavior?
Try after a fresh install with full wipe if it happens
Sent from my GT-I9100 using Tapatalk 2 Beta-5
Well I don't know why, but the sensor has stopped running continuously without any intervention. Thanks for the reply.
I had a similar problem and I found out it was an app causing that - viber.
Probably it was the same with you.
NunxPT said:
I had a similar problem and I found out it was an app causing that - viber.
Probably it was the same with you.
Click to expand...
Click to collapse
Thanks! I had the same problem , and it was indeed Viber.
Btw , did you managed to fix it ?
ZVictor said:
Thanks! I had the same problem , and it was indeed Viber.
Btw , did you managed to fix it ?
Click to expand...
Click to collapse
New viber update today and the issue is fixed
Viber was the problem for me too

Why all ics switches to silent mode by itself

At least once a day, in all ics os's i tried on sveral devices. Looks like a bug in the os.
Sent from my GT-I9300 using Tapatalk 2
There is a setting in ics, called -i believe- quiet hours...check that see if it's perhaps default on?
Can't seem to find it in the settings.
Sorry, I'm on froyo now...I think it was under rom control if you're using a custom rom.
1902 said:
At least once a day, in all ics os's i tried on sveral devices. Looks like a bug in the os.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Agree same problem on all the ice roms plz help
Solve the problem
Hi,
I had the same issue with my Galaxy Nexus but i found a way to solve the problem not permit solution but by using app called " Volume Locker " which will force the device to turn the volume up once it goes silent by sudden.
I am having this problem since galaxy s2. The mobile automatically switches between silent, ringtone, and vibration mode. I think one or 2 apps might be causing this behavior. Really annoying

[Q] CM9 / AOKP Unlock Sound

I've installed CM9, AOKP and Paranoid Android on my i9300 and I have one major issue. How on earth do I turn off the unlock sound. I can't seem to find an option to turn it off or even just change it.
Searching around for it I must be the only one annoyed by it.
Also is it supposed to almost totally silence playing music? Because that's really really annoying having to press a volume key to get the sound back after unlocking.
Settings ––> sound ––>
It's in there. One of the tick boxes further down the page.
Sent from my GT-I9300 using XDA Premium HD app
I've seen that option and tried it, rebooted, tried it again, rebooted, tried it again, rebooted.. It's driving me nuts.
The unlock sound killing playing music is pretty terrible too, I hope that gets fixed at some point.. Think I might stick a bug report in for it.
Using the latest nightly of CM9 this works fine for me. I don't recall it being an issue in any of the other nightlies I've used either, which is all of them since the 24th.

[Q] Atrix 4g doesn't wake up

I am using latest version of Epinter's CyanogenMod 10.1 rom. Sometimes, scratch that almost once every hour my phone doesn't wake up when i pressed the power button. My only option is to take out the battery. I' ve seen other people with similar problem but they said it reboots before experiencing this problem, but I don't see any reboot. It even happens when I lock it and try to wake up a second later. Also if my phone is locked in that state when people call me they hear it ringing but my phone gives no response. Does anyone have a similar problem and/or have a solution to this problem. Thnaks in advance.
deep sleep fix or did you not try that? furthermore, you do realize that this could have been posted in the dev thread, and that this is an alpha kernel and an alpha rom and is experimental
Sent from my MB860 using xda app-developers app

Categories

Resources