pastebin (dot) com / AM975Nfn
Above is what Casual told me to paste in a thread here. I'm a sysadmin so I can provide strong assistance.
NEVERMIND, phone is still working. THANK GOD. Someone delete this please, doesn't appear that I can.
Related
Hey,can anyone just help me to understand how i need to install new software in my hd2? I just buy it,it has some problems with sms and so on,so my friend told me to put in new rom.If it's not a problem,i would be very grateful for all info about doing it,do i need any special programs or snth to do that.
Thanx for any help
Read or watch ROM flashing guides here http://forum.xda-developers.com/forumdisplay.php?f=534
Take your time, don't do anything in haste ; )
I was reading all the forum,and it's only written like to download the rom and vuolia,but what after? Do i need to put the file to sd card or do it in a different way?Do i need to install special program to open files .nbh? Simply my phone isnt working normally,i cant send messages or read it,if i put sd card inside,after few hours phone starts to lag. If there is anyone,who has time to explain how to make it work good,you are god
Sorry, I posted the wrong link. Ooops.
http://forum.xda-developers.com/showthread.php?t=713977
Without know exactly what HD2 you have (european or American), if it's network locked, secondhand and so on, I have know idea why you can't send SMS messages. I recommend reading up on how to flash ROMs via the link above and taking the appropiate action based upon your situation.... We all started this way, honest ; )
In particular this thread is good http://forum.xda-developers.com/showthread.php?t=609477
If you prefer to watch a video, try one of the other links....
try this guide.
http://forum.xda-developers.com/showthread.php?t=621930
hello, I state that my English is poor ... hoping that I apologize for that ...
are now asking if anyone explain to me how to install Android on my TG01 ... are at zero with linux, so it must be a simple explanation ...
Thank you so much for the help
Open your eyes !!
Hey dude !!
Take a look here : http://forum.xda-developers.com/showthread.php?t=672234
Before opening a new thread, please take a look at all the opened ones.
you're right, but I was not able to find it!
thanks for the suggestion
luckylu1977 said:
you're right, but I was not able to find it!
thanks for the suggestion
Click to expand...
Click to collapse
It's right there in VERY FIRST POST in the thread indicated to you! I will be surprised and shocked if you couldn't find it!!
However, in case you really struggled, here is the WHOLE bit copied and pasted from that thread's first post.
Now to run Android properly in your phone !
1.Download any of the builds we have around here.
2.Do backup on your sdcard or if you have additional one use this one.
3.Extract the file with android in your sdcard.
4. Check all the files are inside (sdcard/Android/AndroidApps"folder", media"folder",root"folder",clrcad"file",rootfs"fil e",startup"file",system"file",zImage"file",init rd" file")
5. If you want you can take everything from Android folder and pest it in root of the sdcard but you have to change default text (set cmdline"rel_path=Android change to set cmdline"rel_path=" or set cmdline"rel_path=sdcard") tri with one if is not working try with the other one. I thing the best is leave all files and folder in default Android folder and just copy this folder to your sdcard.
6.Check your zImage and Startup is for Toshidroid :OP (TG01).
7.First RUN haret without CLRCAD.
8.It take no more than10 min to run for the first time.
9. If it take more time RESTART the phone by pressing the POWER BUTTON for 10/20 sec it will restart and back to windows.
11.Try to do the same one more time.
12.If it still not booting to Android and you receive any error messages. Check your sdcard if there is space left in it. Check error message if it say that it can find some file or it can't create a data.
13. Delete everything from your sdcard and format it to fat32.
14.Start from the beginning.
15. If it still not booting to Android then check if you have all files and all set how it has to be.
16. Don't forget you can broke your phone. And we are not responsible for any damage you cause to your phone.
17.It is all up to you.
19. If I forget something sorry about just ask there are other memebers who will try to help you if they can.
20. Sorry for my English mistakes. I'm trying to fix them. :OP
Thanks to all people who try their best to make that possible: Markinus, Arash18k,Bally3,Endrix,Nyl,Arnookie and all other.
Please don't feel bad or offended by any of our posts, but I think the response to you was correct at beginning and we all at XDA do appreciate that the number of threads are kept to minimum and you follow the rule of 'Search before asking' as this keeps it easy for moderators as well as other new members or current members to find something they are looking for in a single thread rather than 10 different threads! Imagine if every new member started opening a new thread!
when it is finished you can put in the NAND as the HD2?
im a noob at hacking etc. and i have a few questions if anyone is able to help at all that would be great. I just got a Dropad A8T. I was able to Root it with GINGERBREAK but am still having some problems with it. I have a very limited market, low hundreds, and im sure thats because its from China. I learned how to edit the files so it will use all apps but after each reboot it always goes back to the original file not the edited. there are a few firmware links ive found around the net but they are on a Chinese website and google translate only goes so far and i can't seem to find a good firmware when i actually find one.
so i guess my questions are, how can i fully open the market and keep it open, and where can i get a new firmware? sorry if these have been asked before i searched for them but didnt find anything helpful.
I am presently using 4.0.3 on my Dropad A8T.
It was written (modded?) by a Russian group.
<link sent in private message due to being a noob and being unable to post external links>:lol:
I do not speak Russian but you select the big red button on the right to download it.
The steps to install it can be found elsewhere. I wont give you them because I would hate to miss something and mess you up.
Here is the link of where I discovered a lot of info.
<link sent in private message due to being a noob and being unable to post external links> :lol:
I hope this helps.
got all the way to step 7 of method two from this http://forum.xda-developers.com/showthread.php?t=2432476 and ran UpTestEX_mod2_marwin only to get a pop up please update R&D test tools".
I know the regular LG R&D doesn't let me revert from kitkat (have tried 5 times), so does anyone know where I can actually get a current R&D mod. Have googled every way I could think of and as I started trying to get this T-Mobile LG G2 re-rooted 14 hours ago, I'm burnt and really need some help.
Thanks in advance
did you reed instructions in the file?
does the script complete.
anyways reboot, add manually the url to hostfile
:\windows\system32\drivers\etc\host
save without txt extension (as all files).
follow instructions again, then it should launch
after manually remove line from hosts again.
that worked for me
also firwall should allow https file that virusscanner may mark as virus.
send from the jungle
yes, I read the instructions, as I said I was up to #7 and that's where the Marwin file will not go through.
Learnerspermit said:
yes, I read the instructions, as I said I was up to #7 and that's where the Marwin file will not go through.
Click to expand...
Click to collapse
Replace the files on LGMOBILEAX with any fix the site has... Next time, post on the correct forum.
adulfo said:
Replace the files on LGMOBILEAX with any fix the site has... Next time, post on the correct forum.
Click to expand...
Click to collapse
I really hate when people scold people about being in the right forum when they actual are.
I've posted a general G2 question in the General G2 forum.
And this question had nothing to do with the LGMOBILEAX file (which I already substituted). It was about the LG R&D not working on an LG G2 which I posted in the LG forum.
Less time acting like a parent, more time reading the post before you offer no help.
yeah bro a question is q&a section
but did you try my suggestions? only read you comment on reading about instructions
send from the jungle
http://forum.xda-developers.com/showthread.php?t=2687768
Rhaegon said:
Ty for all your help but i am lost ATM. I want to be thankful and pay homage to whom homage is DUE! So if i want to link some ones page im guessing i jst put @ before their name ? But how do i QUOTE your post on another thread or post And how do people make a post signature with their devices Rom and promote that rom I thought i knew alot about the internet and pcs but am humbled by this site THANKS for all you guys do been here since 2013 dont say much sry try to figure it out on my own been doing good so far. Thanks
Click to expand...
Click to collapse
If you are trying to show the content from one post to another post of a separate thread:
select "reply"
copy the entire contents of the reply-window
navigate to wherever you want to use that quoted information, and paste it in the new thread/reply/whatever -->
Rhaegon said:
Noted, Done! Perfection! Zero FCs, Zero random reboots, and Zero Gapps issues! I usually have something go wrong on every Rom, but this was a success. Apparently I had garbage left over that could not be wiped from my recovery menu until I used http://d-h.st/szN
Thanks again!
Click to expand...
Click to collapse
If you are simply trying to link to a specific post:
navigate to the post
-either right-click the post-number and copy link address
-or click the post-number, then copy the address from the address bar
now you can paste that link into whatever thread post/reply you want -->
http://forum.xda-developers.com/showpost.php?p=55183884&postcount=8
There are some great format tools in the message creation window that easily allow you to
embed links as text
show text as quoted
Click to expand...
Click to collapse
Code:
show the code behind what you're doing, without executing that code
and others.
I use the "preview post" button a lot when experimenting, and to ensure that everything is the way that I expect, and I suggest the same.
P.S. Always from a desktop. I don't go to such effort when working from the device.
Happy Flashing
-Cyril