Hi.
As the title says, my GT-I9300 (SSN I9300GSMH) is stuck at loading screen. This occured sometime while it was charging. I looked into this problem on the forums and tyed out the following:
1. Soft reseting doesn't seem to do anything.
2. Unable to do a hard reset, as the Volume-up+Home+Power doesn't work.
I am only able to get into download mode so I can reinstall stock ROM. So my question is, where do I find the stock ROM (I9300GSMH). Can't find it anywhere, and some of the suggested download locations seem to be down.
What can I do? Im a big noob in all of this, so any kind of help would be appreciated.
Ty in advance.
sgiunio said:
Hi.
As the title says, my GT-I9300 (SSN I9300GSMH) is stuck at loading screen. This occured sometime while it was charging. I looked into this problem on the forums and tyed out the following:
1. Soft reseting doesn't seem to do anything.
2. Unable to do a hard reset, as the Volume-up+Home+Power doesn't work.
I am only able to get into download mode so I can reinstall stock ROM. So my question is, where do I find the stock ROM (I9300GSMH). Can't find it anywhere, and some of the suggested download locations seem to be down.
What can I do? Im a big noob in all of this, so any kind of help would be appreciated.
Ty in advance.
Click to expand...
Click to collapse
maybe you got an old firmware. go to sammobile.com and download the latest firmware UK , Its the XXEMH1 and flash it with odin.
u can also download the lastest firmware of your carrier and flash it with odin. the full wipes and factory reset.
I think your phone hsd sds ...
Sent From My Galaxy S III Using XDA Premium 4
danieldp1990 said:
maybe you got an old firmware. go to sammobile.com and download the latest firmware UK , Its the XXEMH1 and flash it with odin.
u can also download the lastest firmware of your carrier and flash it with odin. the full wipes and factory reset.
Click to expand...
Click to collapse
OK. I went to sammobile.com and found the specified firmware and the XXEMH1 is listed as Country/Carrier Austria and Nederlands. Does this affect the flashing at all? Can I download any ROM or do I need a specific one for my SSN exactly?
When u say "download the latest firmware from my carrier", what do u mean? How do I do this?
Sry for the noob questions :/
sgiunio said:
OK. I went to sammobile.com and found the specified firmware and the XXEMH1 is listed as Country/Carrier Austria and Nederlands. Does this affect the flashing at all? Can I download any ROM or do I need a specific one for my SSN exactly?
When u say "download the latest firmware from my carrier", what do u mean? How do I do this?
Sry for the noob questions :/
Click to expand...
Click to collapse
In download mode odin mode what does it say for product code ??
For your carrier .
That means your network >> either update via Kies or find it on sammobile or visit your networks service centre.
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
JJEgan said:
In download mode odin mode what does it say for product code ??
For your carrier .
That means your network >> either update via Kies or find it on sammobile or visit your networks service centre.
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
Click to expand...
Click to collapse
I read the SDS thread and Im sure that is my problem.
This to be exact:
"2) Half SDS as it has not-so-affectionately become known. This tends to be more of a boot loop of the Samsung boot splash. the eMMC is partially wiped out. You cannot boot into android or recovery. It fails at the boot screen, but the screen does turn on none-the-less. The only; thing you can do is top boot into Download mode.
One problem Half SDS has is that the information download mode uses to show the status as "Official" appears to be wiped out by the bug, leaving your status as "Custom". This can leave you in a precarious position as this is what Samsung uses to establish warranty validity. You may also see your product field is blank."
My product field is blank and my status is custom. I cant boot into recovery and it fails on the boot screen leaving it on the samsung logo and staying like that.
My product field is blank and my status is custom. I cant boot into recovery and it fails on the boot screen leaving it on the samsung logo and staying like that.
You require a service centre repair .
Samsung may or may not reject as warranty .
jje
JJEgan said:
My product field is blank and my status is custom. I cant boot into recovery and it fails on the boot screen leaving it on the samsung logo and staying like that.
You require a service centre repair .
Samsung may or may not reject as warranty .
jje
Click to expand...
Click to collapse
Yes, I do believe you are right. Let's hope they do not reject my warranty
Thank you for all your help.
Cheers.
Related
hey guys!
So I have had my phone for about 3 month, and today I had decided that I should see if they're any firmware updates since I had not checked in a while. So I did a search in my settings and it said I need to update so I did so. So it downloaded and it seemed to install but when it went to reboot, it just stayed on the boot screen.
I went into recover mode and set it back to factory settings, but still had no luck. Any ideas what to do as plan b?
Give it a few minutes (5-10 Mins) for the first time after updating... It may seem locked up but usually its not the case... After the first boot.. It will boot normally again....
If truly not working suggest downloading latest firmware package for your model and try flashing via odin
hope that helps^^
Sent from my SHW-M250K using XDA App
http://forum.xda-developers.com/showthread.php?t=1108499
jje
nah I had no luck. I left it a good hour after the update and it still did it.
Is it possible to find the official firmware online?
alexbrugs said:
nah I had no luck. I left it a good hour after the update and it still did it.
Is it possible to find the official firmware online?
Click to expand...
Click to collapse
Branded Provider roms post dev section
Stock Samsung roms .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Help out...Samsung galaxy can't boot
Hello Guys,
I am not sure whether I am putting right question in the right place or not? I hope you guys don't mind and apologize me as my mind not working due to my foolish act trying to fly even without wings.....
Here is the story
I got my galaxy s2 I9100 a week ago. I tried to go for root. for this I did it using Odin v1.85. My firmware KH5 as its not available here I tried a related one say KH4. I followed all instructions carefully. Successfully brought in download mode. selected the download mode. connected with odin and browse the PDA .tar file. my mobile was recognized by yellow indicating and I starting. It showed the process running and also showed yellow bar turning in green saying "Pass". But soon mobile stucked at boot page and a yellow triangle appeared. Now I realized I made something wrong in eager of rooting. I tried other .tar files like KH1, KH3 and even KF- etc. But same problem. I tried to solve it by bringing recovery mode but It can't go to recover mode even. Now I can only go to download mode can try flashing via odin but can't get my mobile ahead of boot logo. Please helppppppppppppppppppppppppppp
@ habeebrasheed,
Flash stock firmware from Intratech thread via Odin with phone in download mode.
Then you will have a working phone and can start fresh.
Sent from my GT-I9100 using xda premium
Thanks anyway
@UpInTheAir
Thank you for the suggestion
I have submitted it as the warranty still void ... lets see if they do it or reject straigh forward. Thank you. I will sure keep in mind your solution,
Thankssssssssssssssssssss
I would like help from forum members.
After doing a root using the original firmware version, available here in the forum, my GS2 stopped working.
The device connects, the splash comes from Samsung (the one where the yellow triangle appears), but after that the screen goes black and nothing appears. Imagine turning on your PC but not booting in windows!
I can access the download mode and recovery mode. But nothing I do solves. I've tried putting other firmware versions but not resolved.
The Odin recognizes the device, the Kies not.
Another problem is that I do not know what was the original version of the firmware, but I know that the device was a French version, if that helps.
Flash a stock rom via Odin .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
I tried that. It did not work. I used the XWKK2, XXKI4, and XWKI4 XWKK5. None of them worked. I can flash them as I explained in the first post, but does not work.
Service centre is your next step .
jje
So I'm fu*&$#
I'm outside the country of purchase origin and do not have the invoice.
Tabgyn said:
So I'm fu*&$#
I'm outside the country of purchase origin and do not have the invoice.
Click to expand...
Click to collapse
Did you try booting to recovery and clearing data / cache ?
Yes,I tried.
I would try to install a custom rom for CWM, but can not access the sdcard to copy the files.
Tabgyn said:
Yes,I tried.
I would try to install a custom rom for CWM, but can not access the sdcard to copy the files.
Click to expand...
Click to collapse
Well if you can't get it to work in any known way and you dont want to spend money to get it fixed , I'd say soft-brick it by enabling repartition in Odin and get a jig , then try again. You only lose 3-5$ that way. Don't get me wrong , it's the last thing you should try. What you probably should do is to take it to service.
I bought the usb jig must be delivered within 7 days.
But the jig is used to enter the download mode and reset the counter, right?
I can enter the download mode and recovery mode, I can even install any firmware version (official/CF). But none of that worked.
I believe it is with some corrupted file that is not connected to the firmware.
Or not!
gr4ndm4st3r_bl4ck said:
Well if you can't get it to work in any known way and you dont want to spend money to get it fixed , I'd say soft-brick it by enabling repartition in Odin and get a jig , then try again. You only lose 3-5$ that way. Don't get me wrong , it's the last thing you should try. What you probably should do is to take it to service.
Click to expand...
Click to collapse
Never tick repartition. You won't be able to bring it back that way. You can try soft bricking by unplugging the phone while flashing wih Odin but i still don't recommend it if you aren't able to boot even after flashing multiple roms. Service center would be your best bet
Sent from my GT-I9100
akusokuzan said:
Service center would be your best bet
Click to expand...
Click to collapse
What I said.
gr4ndm4st3r_bl4ck said:
What I said.
Click to expand...
Click to collapse
the message was directed to op rather than to you. I read and understood what you said, maybe my message just came out wrong.
Sent from my GT-I9100
Is your phone branded? Is it I9100G?
Well I don't know.
I get this: http://www.ebay.com/itm/190579058236?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Thats a UK phone .GT-I9100LKAXEU
Clean phone Boot to recovery .
Mounts and storage FORMAT data cache system and sd card . Remove battery .
Download mode via ODIN flash stock rom as per instructions .
jje
steps:
Wipe / Factory Reset
Wipe Cache
Mounts and FORMAT data cache storage system and SD card? How do I do this?
remove battery
download Mode
Flash stock rom
I'm sorry, I'm noob
Just giving some feedback if another user go through the same problem, did the flash with the firm XWKK5 and my gs2 returned to work.
Thank you all for your help.
I was trying to flash ICS into the phone. But it failed so i rebooted the phone. And this happened. I was just helping my friend to flash ICS. But I got no clue how to fix this problem. Cant even boot the phone, put it in download or recovery mode.
Any help is much appreciated! Thanks.
The picture is here "desmond.imageshack.us/Himg820/scaled.php?server=820&filename=img20120508170335.jpg&res=landing"
austinjklim said:
I was trying to flash ICS into the phone. But it failed so i rebooted the phone. And this happened. I was just helping my friend to flash ICS. But I got no clue how to fix this problem. Cant even boot the phone, put it in download or recovery mode.
Any help is much appreciated! Thanks.
Click to expand...
Click to collapse
Lack of information what ICS what phone what method what firmware source .
Try taking battery out a short while .
That fails its a JTag paid for repair though it would be worth buying a USB recovery jig to see if you can get to download mode first .
Other route is service centre if it a legitimate failed KIES update .
jje
@jje pefect answer ,,,
the site dint open to ,next time give proper info dont wast time on trying this tht methood,jtag service center is the hope....
JJEgan said:
Lack of information what ICS what phone what method what firmware source .
Try taking battery out a short while .
That fails its a JTag paid for repair though it would be worth buying a USB recovery jig to see if you can get to download mode first .
Other route is service centre if it a legitimate failed KIES update .
jje
Click to expand...
Click to collapse
Thanks. Sorry for not providing much information. Since im a still a new user, the website doesn't allow me to link pictures. This phone is my friend's. I did not check which firmware he was on. Probably 2.3.6 and the firmware I was going to flash is I9100XWLP7. When flashing it, Odin popped up a FAIL word so i take off the cable and reboot the phone by taking out the battery. Now the phone is in this condition~
"mediafire.com/convkey/d387/7slnddfxb3iai1b6g.jpg" add 3 W and a dot in front
That's forced download mode. Look under the battery for the correct model number and flash an appropriate ROM.
I fail to realise that this phone was different than the others. My bad. If how do i recover it then? Does this model has ICS?
austinjklim said:
I fail to realise that this phone was different than the others. My bad. If how do i recover it then? Does this model has ICS?
Click to expand...
Click to collapse
oinkylicious said:
That's forced download mode. Look under the battery for the correct model number and flash an appropriate ROM.
Click to expand...
Click to collapse
Read, re-read. Everything you need is there.
Considering you don't say what the model actually is, how should I know if it has ICS?
So all that I have to do is flash a 2.3.6 STOCK ROM that is Appropriate to the I9100G. So in this mode, ODIN is still able to flash ROM right?
If you have an I9100G, yes, and it's already in download mode.
Hello.
Currently I have Samsung GT-I9300 (international edition ) that I bought from UAE. But I am already in Indonesia right now.
My s3 is currently at boot loop.
After digging around in the forum, I found a number of things to try.
Here is the list of things I have done:
1. I tried flashing stock rom using odin pc. The stock I used is the newest ( I9300XXEMC3_I9300NEEEMC1_NEE). Result from ODIN: Succeed. But the boot loop is still looping!!
2.Then I tried flashing cmw recovery because I can't get into recovery at all. After flashing, there's red exclamation mark on upper left corner with the Samsung logo. And still cannot get into recovery using the combo (vol up+home+power) button, it wouldnt go into recovery at all and keep showing me the samsung logo.
3.Next I tried flashing the rescue firmware in i9000 post (http://forum.xda-developers.com/showthread.php?p=40509099#post40509099). I used the XXELLA. Flashed the pit, csc, pda and bootloader. The boot loop still persist.
4.The last thing I did is bring it to Samsung service center. They tried flashing their current (Indonesian) stock rom but the problem also persists. They advised that I need to change the mainboard in UAE where the phone is originally from. They said because after changing mainboard , they need to re inject IMEI. And can only do that in original country. And they informed me the flash also succeed thru odin, it's just the boot loop is still looping...
In download mode the product name still presents. (I read a post in this forum saying if the product name still persists then the mainboard is not fried (is the information correct?)
And all flashing thru odin give me succeed message.This indicates my mainboard is still safe.
My problem now is I cannot get into reocvery and the boot loop persists.
I believe that my problem would be not being able to wipe data /cache as I can't get into recovery mode.
So my question is can I wipe data and cache using odin ? If yes, coudd anyone tell me how?
Also, please advise me on what else to try on my S3.
I am really desperate and out of ideas.
Your help would be greatly appreciated !
Thank you.
Help? Please try the help section for that
You have already posted this identical question .#
Service centre says new motherboard required symptoms you post say Nand damaged .
Answer replace motherboard .
jje
Awww. Somebody needs to help the poor guy.
DeadSOL said:
Awww. Somebody needs to help the poor guy.
Click to expand...
Click to collapse
I'm not sure if this helps, but I have two points:
the red exclamation mark is usual after flashing non-Samsung images.
If you check "Re-Partition" in Odin, the data should be wiped.
DISCLAIMER: No guaranty! Your're using Odin at your own risk
If you have wiped data it old be damaged NAND flashing stock and a data wipe should fix any software problems.
Sent from my GT-I9300 using xda premium
JJEgan said:
You have already posted this identical question .#
Service centre says new motherboard required symptoms you post say Nand damaged .
Answer replace motherboard .
jje
Click to expand...
Click to collapse
Hi JJE,
so the symptoms i posted point to a damanged Nand?
would it be posssible that the Nand is damaged and i still manage to flash stock rom via ODIN without any error message?
thanks for your help.
One flash stock rom = failed .
Two Recovery = failed
Flash Rescue firmware = failed
Service centre answer = needs a motherboard .
Possible try
http://forum.xda-developers.com/showthread.php?t=1796062
jje
Nand is most likely fried...however if not, try flashing with repartition and pit, you cannot loose much if your phone doesnt work anyways. BTW, on which firmware/kernel dis this occur?
Sent from my GT-I9300 using xda app-developers app
gaspernemec said:
Nand is most likely fried...however if not, try flashing with repartition and pit, you cannot loose much if your phone doesnt work anyways. BTW, on which firmware/kernel dis this occur?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hi.
I have tried repartitioning using the rescue firmware. Still boot loop.
I cant remember the firmware/kernel the s3 had.
Anyway, i guess now i have confirmed that my s3 is dead.
nevertheless, thank you guys for responding.
Cheers.
Hi
I hope someone here can help me
I have a galaxy S3 GT-I9300 I was running cyanogen mode and having issues with mms so thought about going back to stock
I followed a guide and used triangle away to get the counter back to zero and flashed what I though was standard firmware.
I'm now stuck in a bottloop and cant get back to any form or rom customer or other wise
In download mode I get
PRODUCT NAME GT-I9300
CUSTOM BINARY DOWNLOAD YES (1 COUNT)
CUSTOM BINARY SAMSUNG OFFICIAL
SYSTEM STATUS OFFICAL
I'm really not sure where to go from here
Please help and thanks in anticipation
Your question has been posted multiple times . Forum rules require you to search before posting .
Google <<< I9300 your search terms > xda
In recovery
Format system sdcard data cache .
Boot to download mode flash stock rom via Odin.
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Downgrade and network problems .
http://forum.xda-developers.com/showthread.php?t=2531221
Beanieman said:
Hi
I hope someone here can help me
I have a galaxy S3 GT-I9300 I was running cyanogen mode and having issues with mms so thought about going back to stock
I followed a guide and used triangle away to get the counter back to zero and flashed what I though was standard firmware.
I'm now stuck in a bottloop and cant get back to any form or rom customer or other wise
In download mode I get
PRODUCT NAME GT-I9300
CUSTOM BINARY DOWNLOAD YES (1 COUNT)
CUSTOM BINARY SAMSUNG OFFICIAL
SYSTEM STATUS OFFICAL
I'm really not sure where to go from here
Please help and thanks in anticipation
Click to expand...
Click to collapse
First. U shld actually flash the rom then use triangle away lol. How did u flash the rom? I suppose thru odin? Download the firmware from sammobile and flash it thru odin.
Solved
I was being retarded and wasn't getting to the boot load to factory reset and wipe the cash forgot to tasp the power button not hold it down, did this and all ok now, now doing correct Kies update as we speak,
thanks for the replies though