[Q] Need help on this problem - Galaxy S II Q&A, Help & Troubleshooting

I was trying to flash ICS into the phone. But it failed so i rebooted the phone. And this happened. I was just helping my friend to flash ICS. But I got no clue how to fix this problem. Cant even boot the phone, put it in download or recovery mode.
Any help is much appreciated! Thanks.
The picture is here "desmond.imageshack.us/Himg820/scaled.php?server=820&filename=img20120508170335.jpg&res=landing"

austinjklim said:
I was trying to flash ICS into the phone. But it failed so i rebooted the phone. And this happened. I was just helping my friend to flash ICS. But I got no clue how to fix this problem. Cant even boot the phone, put it in download or recovery mode.
Any help is much appreciated! Thanks.
Click to expand...
Click to collapse
Lack of information what ICS what phone what method what firmware source .
Try taking battery out a short while .
That fails its a JTag paid for repair though it would be worth buying a USB recovery jig to see if you can get to download mode first .
Other route is service centre if it a legitimate failed KIES update .
jje

@jje pefect answer ,,,
the site dint open to ,next time give proper info dont wast time on trying this tht methood,jtag service center is the hope....

JJEgan said:
Lack of information what ICS what phone what method what firmware source .
Try taking battery out a short while .
That fails its a JTag paid for repair though it would be worth buying a USB recovery jig to see if you can get to download mode first .
Other route is service centre if it a legitimate failed KIES update .
jje
Click to expand...
Click to collapse
Thanks. Sorry for not providing much information. Since im a still a new user, the website doesn't allow me to link pictures. This phone is my friend's. I did not check which firmware he was on. Probably 2.3.6 and the firmware I was going to flash is I9100XWLP7. When flashing it, Odin popped up a FAIL word so i take off the cable and reboot the phone by taking out the battery. Now the phone is in this condition~
"mediafire.com/convkey/d387/7slnddfxb3iai1b6g.jpg" add 3 W and a dot in front

That's forced download mode. Look under the battery for the correct model number and flash an appropriate ROM.

I fail to realise that this phone was different than the others. My bad. If how do i recover it then? Does this model has ICS?

austinjklim said:
I fail to realise that this phone was different than the others. My bad. If how do i recover it then? Does this model has ICS?
Click to expand...
Click to collapse
oinkylicious said:
That's forced download mode. Look under the battery for the correct model number and flash an appropriate ROM.
Click to expand...
Click to collapse
Read, re-read. Everything you need is there.
Considering you don't say what the model actually is, how should I know if it has ICS?

So all that I have to do is flash a 2.3.6 STOCK ROM that is Appropriate to the I9100G. So in this mode, ODIN is still able to flash ROM right?

If you have an I9100G, yes, and it's already in download mode.

Related

My SGS2 doesn't want to work after repartition with odin

Hi
I received today my new SGS2 locked. I tryed to install firmware 3 files+pit so i can unlock it. At the pit file Odin stopped and after about 3 mins I unplugged the data cable.
Now I can't turn it on, charge or anything else!
Can anyone help me ?
mboncalo said:
Hi
I received today my new SGS2 locked. I tryed to install firmware 3 files+pit so i can unlock it. At the pit file Odin stopped and after about 3 mins I unplugged the data cable.
Now I can't turn it on, charge or anything else!
Can anyone help me ?
Click to expand...
Click to collapse
Can you get it back into Download mode so you can re-flash firmware?
Why did you flash the pit in the first place? (All tutorials tell you not to do this)
If you cant get it to boot into anything (download or recovery) then I don't know if its possible to restore it...
You might also want to try taking the battery out and putting it back in again if you havent already
You install the wrong pit file .?????
What instructions are you following .
jje
It is possible to repartition but you would need the proper set of files that support it.
If i'm right (not sure though) you can do it with a set that contain the "_user_low_ship" in the pda name.
The download on samfirmware of the I9100XWKF1 does have this, containing odin 1.85, a 3 set for pda, modem and csc, and pit file.
JJEgan said:
You install the wrong pit file .?????
What instructions are you following .
jje
Click to expand...
Click to collapse
I used Odin3 v1.7 with s1_odin_20100803.pit and I9000XWJS3...
mboncalo said:
I used Odin3 v1.7 with s1_odin_20100803.pit and I9000XWJS3...
Click to expand...
Click to collapse
Thats a partition and ROM for the original galaxy S...
Can you get back to download to flash one for the GSII?
You can download the .PIT from here http://www.samfirmware.com/WEBPROTECT-i9100.htm
Also update Odin to 1.83
Epic-Emodude said:
Thats a partition and ROM for the original galaxy S...
Can you get back to download to flash one for the GSII?
You can download the .PIT from here
Also update Odin to 1.83
Click to expand...
Click to collapse
It's useless now because the phone is dead. I can't enter download or recovery mode. I can't turn it on or charge it...
What can I do now ? I guess it's not possible to be completely broken
mboncalo said:
It's useless now because the phone is dead. I can't enter download or recovery mode. I can't turn it on or charge it...
What can I do now ? I guess it's not possible to be completely broken
Click to expand...
Click to collapse
Send it for a repair and hope it won't be a too costly one or the repair guys cannot turn it on either to find out you tried to flash a SGS firmware on it. Also Odin is now going in version 1.8x so you should update your flashing software too.
Pume said:
Send it for a repair and hope it won't be a too costly one or the repair guys cannot turn it on either to find out you tried to flash a SGS firmware on it. Also Odin is now going in version 1.8x so you should update your flashing software too.
Click to expand...
Click to collapse
Someone from another board told me to try with an USB JIG to start in download mode... Do you guy think it could work this way since I can't turn on my phone in any way ?
Yes you can use a jig check this out
http://www.youtube.com/watch?v=9YRPWU4waa4&feature=youtube_gdata_player
Hope it helps, order one online and goodluck
Sent from my GT-I9100 using XDA Premium App
mboncalo said:
Someone from another board told me to try with an USB JIG to start in download mode... Do you guy think it could work this way since I can't turn on my phone in any way ?
Click to expand...
Click to collapse
The JIGs are like £4 on ebay, so its worth a try, and if it doesnt work then you can sell it on or something.
USB jig any Odin should work flash stock firmware but follow instructions to the letter and read what you are doing first .
jjue
Good luck with the jig hopefully it will work and you can get your phone working again.
I am amazed it let you flash it as well being a totally different ROM!
Take the battery out then press and hold the power key for 10 seconds.
then press and hold home and vol down, do not let go of the keys while doing below
then insert the USB cable
then insert the battery
Does it now go into download mode and get recognised by the PC?
I went to a phone service and the guy there told me that the boot loader was completely erased, everything...there's nothing...
Just wondering why would you try flashing sgs pit and sgs firmware on sgs2.
Sent from my GT-I9100
Idan73 said:
Just wondering why would you try flashing sgs pit and sgs firmware on sgs2.
Sent from my GT-I9100
Click to expand...
Click to collapse
I think he was high when he did it.
Idan73 said:
Just wondering why would you try flashing sgs pit and sgs firmware on sgs2.
Sent from my GT-I9100
Click to expand...
Click to collapse
I'm a newbie in this area and didn't do more research. So that's why i didn't knew there is a difference. I hurry and here I am. What can I do now ?
zxz0O0 said:
I think he was high when he did it.
Click to expand...
Click to collapse
yea, I can say i got high seeing SGS2 in my hands...
mboncalo said:
I'm a newbie in this area and didn't do more research. So that's why i didn't knew there is a difference. I hurry and here I am. What can I do now ?
Click to expand...
Click to collapse
If the bootloader is gone then you would need special equipement to repair.
Sorry to say this but if there is no way to load the bootloader from sdcard or something then you are screwed.

[Q] My GS2 does not work

I would like help from forum members.
After doing a root using the original firmware version, available here in the forum, my GS2 stopped working.
The device connects, the splash comes from Samsung (the one where the yellow triangle appears), but after that the screen goes black and nothing appears. Imagine turning on your PC but not booting in windows!
I can access the download mode and recovery mode. But nothing I do solves. I've tried putting other firmware versions but not resolved.
The Odin recognizes the device, the Kies not.
Another problem is that I do not know what was the original version of the firmware, but I know that the device was a French version, if that helps.
Flash a stock rom via Odin .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
I tried that. It did not work. I used the XWKK2, XXKI4, and XWKI4 XWKK5. None of them worked. I can flash them as I explained in the first post, but does not work.
Service centre is your next step .
jje
So I'm fu*&$#
I'm outside the country of purchase origin and do not have the invoice.
Tabgyn said:
So I'm fu*&$#
I'm outside the country of purchase origin and do not have the invoice.
Click to expand...
Click to collapse
Did you try booting to recovery and clearing data / cache ?
Yes,I tried.
I would try to install a custom rom for CWM, but can not access the sdcard to copy the files.
Tabgyn said:
Yes,I tried.
I would try to install a custom rom for CWM, but can not access the sdcard to copy the files.
Click to expand...
Click to collapse
Well if you can't get it to work in any known way and you dont want to spend money to get it fixed , I'd say soft-brick it by enabling repartition in Odin and get a jig , then try again. You only lose 3-5$ that way. Don't get me wrong , it's the last thing you should try. What you probably should do is to take it to service.
I bought the usb jig must be delivered within 7 days.
But the jig is used to enter the download mode and reset the counter, right?
I can enter the download mode and recovery mode, I can even install any firmware version (official/CF). But none of that worked.
I believe it is with some corrupted file that is not connected to the firmware.
Or not!
gr4ndm4st3r_bl4ck said:
Well if you can't get it to work in any known way and you dont want to spend money to get it fixed , I'd say soft-brick it by enabling repartition in Odin and get a jig , then try again. You only lose 3-5$ that way. Don't get me wrong , it's the last thing you should try. What you probably should do is to take it to service.
Click to expand...
Click to collapse
Never tick repartition. You won't be able to bring it back that way. You can try soft bricking by unplugging the phone while flashing wih Odin but i still don't recommend it if you aren't able to boot even after flashing multiple roms. Service center would be your best bet
Sent from my GT-I9100
akusokuzan said:
Service center would be your best bet
Click to expand...
Click to collapse
What I said.
gr4ndm4st3r_bl4ck said:
What I said.
Click to expand...
Click to collapse
the message was directed to op rather than to you. I read and understood what you said, maybe my message just came out wrong.
Sent from my GT-I9100
Is your phone branded? Is it I9100G?
Well I don't know.
I get this: http://www.ebay.com/itm/190579058236?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Thats a UK phone .GT-I9100LKAXEU
Clean phone Boot to recovery .
Mounts and storage FORMAT data cache system and sd card . Remove battery .
Download mode via ODIN flash stock rom as per instructions .
jje
steps:
Wipe / Factory Reset
Wipe Cache
Mounts and FORMAT data cache storage system and SD card? How do I do this?
remove battery
download Mode
Flash stock rom
I'm sorry, I'm noob
Just giving some feedback if another user go through the same problem, did the flash with the firm XWKK5 and my gs2 returned to work.
Thank you all for your help.

Stuck during KIES Firmware Update

Hi,
today I tried to update my sgs3 via kies and now it's stuck at 18% for 30min. what can I do?
thank you!
yoper
Wait
Or use the recovery in Kies tools .
Or join XDA and flash stock rom via Odin .
Or return to service centre .
A Samsung user forum may have more information on KIES .
jje
But can I unplug the cable and stop the FW update?
yoper said:
But can I unplug the cable and stop the FW update?
Click to expand...
Click to collapse
Yes but if it is actually updating it may be a problem .
jje
I pushed the power button on the phone and know I got a message "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
and now this message don't disappear, I'm trying to recover via kies. but I think this is going nowhere.
It's possible that I've bricked my phone?
Not bricked .
Choice one take to a service centre say Kies update failed .
Or from XDA flash stock rom for your location .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
As u have no clue of how to flash firmware, u need to read a lot (not that much).I would take it back to the story and tell them kies failed upgrade.In the mean time read here on how to flash, why cos' it's fun and improves your phone by a mile
I've been reading a lot about flashing, but I don't understand one thing, if I flash a original rom through odin I void my guarantee? or not?
I'm trying the recover firmware through kies but it's not recognizing my phone. I tried to put the phone in download mode and it works, otherwise the recover message appears everytime I turn on the device. but Kies does't recognize it.
thank you
Thank you all.
Today I did the recover with other pc and everything went fine with kies recovery.
yoper said:
I've been reading a lot about flashing, but I don't understand one thing, if I flash a original rom through odin I void my guarantee? or not?
No Samsung warranty remains valid .
jje
Click to expand...
Click to collapse
Thanks!!! good to know, next time I will flash via odin.
yoper
Original firmware is signed by Samsung so warranty is intact.
If youre rooted and a problem occurs.then use "triangle away" to reset flashcounter and flash a stock firmware with Odin.then off to the store with full warranty...
I didn't rooted my phone yet, I'm new to android, my first experience with Android was with my xperia x1 but was not stable so I moved again to wm. And then I changed to iOS and now I bought the sgs3. So I have the phone for about 1 month and now I'm still in the reading part. Then I will root.
My phone is an Italian one unlocked, and I have this firmware XXALF6, is this the last firmware? Because my problem started because I was trying to update, when I search for a new software on the phone I get this message to try with kies and when I tried, it got stuck and I don't know if this is the last firmware or not. I searched on sammobile and seems to be the last one.
Thank you for the info.
yoper
Sent from my GT-I9300 using xda app-developers app

[Q] Stuck at NAND Write Start!! Help ASAP!!

Hey guys,
I don't know what happened but I was trying to update my phone (GT-I9300) using Odin v3.07 and I'm getting stuck at NAND Write Start.
Also, I'm unable to boot into recovery mode.
Also, When I try to reboot my phone normally, I end up in downloading mode but without the counter and all those stats which are written in top left corner. Just plain simple downloading mode. I don't know what to do. Please help me out ASAP as my battery will die otherwise.
P.S. Phone's not charging!!! :'(
saurabh_goyal93 said:
Hey guys,
I don't know what happened but I was trying to update my phone (GT-I9300) using Odin v3.07 and I'm getting stuck at NAND Write Start.
Also, I'm unable to boot into recovery mode.
Also, When I try to reboot my phone normally, I end up in downloading mode but without the counter and all those stats which are written in top left corner. Just plain simple downloading mode. I don't know what to do. Please help me out ASAP as my battery will die otherwise.
P.S. Phone's not charging!!! :'(
Click to expand...
Click to collapse
I guess you Messed it up.. Wish any dev could help ya
GOOD LUCK :good:.
BHARGAV33 said:
I guess you Messed it up.. Wish any dev could help ya
GOOD LUCK :good:.
Click to expand...
Click to collapse
What??? Seriously?? Warranty is still there or is it void?
Download mode shows the following:
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
saurabh_goyal93 said:
What??? Seriously?? Warranty is still there or is it void?
Download mode shows the following:
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Click to expand...
Click to collapse
Try getting into recovery mode..
Remove the battery
Hold down the keys for recovery mode(without battery)
Then put the battery in..
Don't leave the keys until you get into recovery mode.. Probably you'd have to try flashing an new rom through recovery..make sure the first thing you do.on CWM is factory reset
---------- Post added at 03:32 AM ---------- Previous post was at 03:30 AM ----------
And also see if you could flash an new version of CWM through Odin
saurabh_goyal93 said:
What??? Seriously?? Warranty is still there or is it void?
Download mode shows the following:
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Click to expand...
Click to collapse
You were the one asking about hardbrick and now it seems you could have suffered one. What a fu**ed up coinsidence. Although for now it looks like a Soft-Brick
Ok first , how many % did your battery have when you started flashing?
Second, what Firmware did you flash and where did you get it (link would be good)?
The flashing counter looks good except the the System Status. It states custom which indicates that you changed the Firmware in some way which could void warranty but not always, depends on the carrier and the Service Center.
Scarface1991 said:
You were the one asking about hardbrick and now it seems you could have suffered one. What a fu**ed up coinsidence. Although for now it looks like a Soft-Brick
Ok first , how many % did your battery have when you started flashing?
Second, what Firmware did you flash and where did you get it (link would be good)?
The flashing counter looks good except the the System Status. It states custom which indicates that you changed the Firmware in some way which could void warranty but not always, depends on the carrier and the Service Center.
Click to expand...
Click to collapse
1) Around 50% but the amount of battery left is much much less than that. I can feel it.
2) XXDLJ4 from Sammobile. I can't find the link. But it was official firmware from UK.
I live in India. We don't have carrier specific phones yet. But I have no idea what service centre guys are going to say. I'm just gonna tell him that I was updating using kies and this happened.
BHARGAV33 said:
Try getting into recovery mode..
Remove the battery
Hold down the keys for recovery mode(without battery)
Then put the battery in..
Don't leave the keys until you get into recovery mode.. Probably you'd have to try flashing an new rom through recovery..make sure the first thing you do.on CWM is factory reset
---------- Post added at 03:32 AM ---------- Previous post was at 03:30 AM ----------
And also see if you could flash an new version of CWM through Odin
Click to expand...
Click to collapse
Thanks for your reply but I'm unable to get into recovery mode. I tried what you said.
XXDLJ4 is outdated and is from 2012. From what Google says it`s Android 4.1.1 . There are newer Firmwares around. The newest Firmware to my knowledge is XXEMC3. However it doesn`t matter what the Firmware is, it should work even if the Firmware is old. Do you still have the log from Odin? It would be good to see where Odin failed exactly. A screenshot would be great.
Scarface1991 said:
XXDLJ4 is outdated and is from 2012. From what Google says it`s Android 4.1.1 . There are newer Firmwares around. The newest Firmware to my knowledge is XXEMC3. However it doesn`t matter what the Firmware is, it should work even if the Firmware is old. Do you still have the log from Odin? It would be good to see where Odin failed exactly. A screenshot would be great.
Click to expand...
Click to collapse
Yeah. Sure. Here you go.
Ok a friend of mine had the same issue one time with his I9000 and it helped to switch the USB Ports and then try to flash the firmware again. Also turn off every process that belongs to Kies. Go to Task manager and Kill every Kies process.
Also try to use Odin 1.85, I`ve seen people having problems with Odin 3.xx before
Scarface1991 said:
Ok a friend of mine had the same issue one time with his I9000 and it helped to switch the USB Ports and then try to flash the firmware again. Also turn off every process that belongs to Kies. Go to Task manager and Kill every Kies process.
Also try to use Odin 1.85, I`ve seen people having problems with Odin 3.xx before
Click to expand...
Click to collapse
I'll do that. Give me two mins.
P.S. Can I somehow charge my phone's battery? Like through a wall socket? It shows old style downloading mode with no info whatsoever if I do that? Is it charging?
Scarface1991 said:
Ok a friend of mine had the same issue one time with his I9000 and it helped to switch the USB Ports and then try to flash the firmware again. Also turn off every process that belongs to Kies. Go to Task manager and Kill every Kies process.
Also try to use Odin 1.85, I`ve seen people having problems with Odin 3.xx before
Click to expand...
Click to collapse
Same issue! I even reinstalled the drivers!!
saurabh_goyal93 said:
I'll do that. Give me two mins.
P.S. Can I somehow charge my phone's battery? Like through a wall socket? It shows old style downloading mode with no info whatsoever if I do that? Is it charging?
Click to expand...
Click to collapse
Nope I don`t think it`s charging. That`s why almost every flashing guide says that you should have a fully charged battery before you flash a ROM to your device.
Edit: Ok this is weird. I would try a different Firmware.
Scarface1991 said:
Nope I don`t think it`s charging. That`s why almost every flashing guide says that you should have a fully charged battery before you flash a ROM to your device.
Click to expand...
Click to collapse
Yeah I know that. But this thing has never ever happened to me. So I guess I was over-confident!
Turn your phone off so the battery won`t die. Then download the latest Firmware and flash it the same way you did before. This is the only thing that you could do to my knowledge.
Do you have a Custom ROM on your phones internal or external SD? If yes you could follow up on BHARGAV33`s tip to flash CWM Recovery through Odin and then try to access Recovery and afterwards wipe data and flash a new ROM.
saurabh_goyal93 said:
Yeah. Sure. Here you go.
Click to expand...
Click to collapse
i faced same problem in two of my USB ports and was successful in the other ones ! as the senior member said try changing your pc USB ports. good luck ! :good:
Scarface1991 said:
Nope I don`t think it`s charging. That`s why almost every flashing guide says that you should have a fully charged battery before you flash a ROM to your device.
Edit: Ok this is weird. I would try a different Firmware.
Click to expand...
Click to collapse
I've tried all the firmwares which I have! Android 4.0.4, 4.1.1, 4.1.2, everything!
No change in result!
Its bricked...hard bricked...send it off if you have warranty...it happened to me.
Sent from my Vivid 4G using xda app-developers app
"NAND Erase All" is worth trying?
Scarface1991 said:
Turn your phone off so the battery won`t die. Then download the latest Firmware and flash it the same way you did before. This is the only thing that you could do to my knowledge.
Do you have a Custom ROM on your phones internal or external SD? If yes you could follow up on BHARGAV33`s tip to flash CWM Recovery through Odin and then try to access Recovery and afterwards wipe data and flash a new ROM.
Click to expand...
Click to collapse
Doing that only for the some past hours. No, I'm unable to get into recovery in the way he said. I've already tried it. I searched around on forum & some people were able to tackle their issue by flashing a complete firmware with 3 files. I download the whole firmware which had 3 files but still no luck. I'm going crazy over here, should I just give my phone to Samsung Care and let them deal with it? Or is there anything left to try?
And BTW, I gotta ask, what exactly happens if someone ticks "NAND Erase All" in odin when flashing a firmware. I've not done this because according to me, it's not advisable to play with things which you don't know about.
1) So, what does "NAND Erase All" in odin do exactly?
2) Will it somehow be helpful in my situation?
3) Also, some people on XDA say that NAND Erase All hard bricks your phone & warranty is also void. Is this true?
[email protected] said:
Its bricked...hard bricked...send it off if you have warranty...it happened to me.
Sent from my Vivid 4G using xda app-developers app
Click to expand...
Click to collapse
Download mode shows the following:
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom <<<<<<< This is the part I'm worried about!!
Is my warranty voided or not?

Help! GT-I9300 stuck at loading screen

Hi.
As the title says, my GT-I9300 (SSN I9300GSMH) is stuck at loading screen. This occured sometime while it was charging. I looked into this problem on the forums and tyed out the following:
1. Soft reseting doesn't seem to do anything.
2. Unable to do a hard reset, as the Volume-up+Home+Power doesn't work.
I am only able to get into download mode so I can reinstall stock ROM. So my question is, where do I find the stock ROM (I9300GSMH). Can't find it anywhere, and some of the suggested download locations seem to be down.
What can I do? Im a big noob in all of this, so any kind of help would be appreciated.
Ty in advance.
sgiunio said:
Hi.
As the title says, my GT-I9300 (SSN I9300GSMH) is stuck at loading screen. This occured sometime while it was charging. I looked into this problem on the forums and tyed out the following:
1. Soft reseting doesn't seem to do anything.
2. Unable to do a hard reset, as the Volume-up+Home+Power doesn't work.
I am only able to get into download mode so I can reinstall stock ROM. So my question is, where do I find the stock ROM (I9300GSMH). Can't find it anywhere, and some of the suggested download locations seem to be down.
What can I do? Im a big noob in all of this, so any kind of help would be appreciated.
Ty in advance.
Click to expand...
Click to collapse
maybe you got an old firmware. go to sammobile.com and download the latest firmware UK , Its the XXEMH1 and flash it with odin.
u can also download the lastest firmware of your carrier and flash it with odin. the full wipes and factory reset.
I think your phone hsd sds ...
Sent From My Galaxy S III Using XDA Premium 4
danieldp1990 said:
maybe you got an old firmware. go to sammobile.com and download the latest firmware UK , Its the XXEMH1 and flash it with odin.
u can also download the lastest firmware of your carrier and flash it with odin. the full wipes and factory reset.
Click to expand...
Click to collapse
OK. I went to sammobile.com and found the specified firmware and the XXEMH1 is listed as Country/Carrier Austria and Nederlands. Does this affect the flashing at all? Can I download any ROM or do I need a specific one for my SSN exactly?
When u say "download the latest firmware from my carrier", what do u mean? How do I do this?
Sry for the noob questions :/
sgiunio said:
OK. I went to sammobile.com and found the specified firmware and the XXEMH1 is listed as Country/Carrier Austria and Nederlands. Does this affect the flashing at all? Can I download any ROM or do I need a specific one for my SSN exactly?
When u say "download the latest firmware from my carrier", what do u mean? How do I do this?
Sry for the noob questions :/
Click to expand...
Click to collapse
In download mode odin mode what does it say for product code ??
For your carrier .
That means your network >> either update via Kies or find it on sammobile or visit your networks service centre.
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
JJEgan said:
In download mode odin mode what does it say for product code ??
For your carrier .
That means your network >> either update via Kies or find it on sammobile or visit your networks service centre.
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
Click to expand...
Click to collapse
I read the SDS thread and Im sure that is my problem.
This to be exact:
"2) Half SDS as it has not-so-affectionately become known. This tends to be more of a boot loop of the Samsung boot splash. the eMMC is partially wiped out. You cannot boot into android or recovery. It fails at the boot screen, but the screen does turn on none-the-less. The only; thing you can do is top boot into Download mode.
One problem Half SDS has is that the information download mode uses to show the status as "Official" appears to be wiped out by the bug, leaving your status as "Custom". This can leave you in a precarious position as this is what Samsung uses to establish warranty validity. You may also see your product field is blank."
My product field is blank and my status is custom. I cant boot into recovery and it fails on the boot screen leaving it on the samsung logo and staying like that.
My product field is blank and my status is custom. I cant boot into recovery and it fails on the boot screen leaving it on the samsung logo and staying like that.
You require a service centre repair .
Samsung may or may not reject as warranty .
jje
JJEgan said:
My product field is blank and my status is custom. I cant boot into recovery and it fails on the boot screen leaving it on the samsung logo and staying like that.
You require a service centre repair .
Samsung may or may not reject as warranty .
jje
Click to expand...
Click to collapse
Yes, I do believe you are right. Let's hope they do not reject my warranty
Thank you for all your help.
Cheers.

Categories

Resources