So i am trying a lot of roms and kernels lately due to some issues i got that i posted in another threat. And after i flashed a nightelf exp kernel, my play store was missing. I tried flashing stock GB rom .62 (with kernel) and everything was fine. But when i flashed nightelf kernel again now my play store AND my dialer apps are missing. When i flash the rom i want (Gin2Jellybean) they are still missing.
What should I do?
PS: even if i flash the gapps zip all gapps appears except for play store. And i already tried adb pushing too...
Just tried with Lupus GB kernel and now the vending.apk and dialer didn't gone missing. Could that be any kind of incompatbility between nightelf kernel and stock .62? It's strange because i think i already did that before...
I don't know what's the problem, but if you plan to use Gin2JellyBean, you can just use the Stock kernel. It works really really well. No lags and battery life is good.
It's a good idea, but i'll miss the OC, and 2 way call recording from a custom kernel.
Related
Hi guys,
I was testing the rom slimGen 1.4 v20 ..., before I change my BB to new v20 using LGMDP.
So I flashed the rom slimGen 1.4 v20 ... start OK ... work fine.. nice.
But, When I was trying install some apps from market or using local .apks, I receive message of incompatibilities, and cant install...
some apps like: Viber, Tweetdeck, and others.
So, I back to v10 BB, and re-flashed slimGen 1.3 v10 ... I tested and work normally again...
Anyone know why this happened?
Thx.
I've noticed that when I flash a certain kernel, my phone somehow loses compatibility with some apps. And I know for a fact that slimgen 1.3 uses a different kernel than slimgen 1.4. Try flashing slimgen 1.4 again, but switch to another kernel (something other than franco's kernel, because that is the kernel that gives me issues with compatibility). I don't know if this works, but it doesn't hurt to try
Yup I also had some apps like lane splitter, shine runner, etc. when I flashed the new bb I lost compatibility with those apps
Sent from my LG-P500 using xda premium
I flashed latest RoQ kernel in Slimgen 1.5.2 but incompatibilies continue....
for the moment, just viber
any idea?
Sorry for my bad henglish but i need help
I have a serious problem with the touch screen and custom rom. With the CM9, CM7 and MIUI, and its kernel, touchscreen does not work! But if I use the stock rom and kernel the touch screen works, or if I use the official ICS kernel beta with ICS Rom: KA15 Team Ice Cream or Sony Xperia Hybryd rom or ICS official Sony touch screen works ...
So I think that the touch screen works only with the official kernel!
Here's how I do:
1 - flash with fastboot kernel
2-cwm go to recovery and wipe data / factory reset, and Dalvik cache partition
3-zip file with the flash custom roms
4-reboot
But with CM9, CM7, Miui and their kernels touch screen does not respond
Please Help!
Try to use KA1x kernel with miui/CM roms; Maybe it works.
Could you give me the link of this kernel?
I have used PwnKernel 1.6 with miui and SETweaked android 2.3.x and PwnKernel ICS for KA15 and it worked very well.
PwnKernel 1.6: click
PwnKernel ICS(no bluetooth): click
Inside the zips you will find the boot.img(kernel) and Pwnkernel-modules. For wifi and bluetooth(BT only for pwnk 1.6) you have to install them under recovery after flashing the kernel.
If they don't work, take a look here; it's a list with kernels and roms for neo.
http://forum.xda-developers.com/showthread.php?t=1316394
I have used 1.6 Pwnkernel with CM7.1 but the touch screen does not work the same!
In my opinion the problem is another, looks like this user has solved the same problem but with a ZTE phone: http://www.youtube.com/watch?v=jKO9flwApD0. I tried doing the same thing but my Neo does not work without batteries, then the user updating the video wrote that he found a better way to solve with a fixed kernel. I also tried the kernel FXP but the problem returns! is very strange but I can not find solutions!
maybe it's depends on hardware, maybe your phone has other touchscreen (like there was with SE X8)
Trust me the stock Rom is much faster than many others. I've give up on trying any android 2.x based roms and the ICS ones are, at least for now, laggy and/or buggy. Don't feel bad if you can't solve this problem
Use the fxp kernel provided in the rom and download the latest cm7.2
Pwn kernel will give problems for cm7 and miui.
And since miui is based on cm7 and cm9 ...they share the same bugs...if you are facing dead portion of screen at the bottom in landscape mode...then only latest fxp kernel can help.
And if the whole screen is non functional ...then there is something wrong with your flashing...and it is obviously kernel related.
Sent from my MT11i using XDA
U should 1st flash the .64 baseband coz cm7/9 n miui need .64 baseband to work properly
Sent from my MT11i using XDA
I have flashed .64 firmware official, then i have flashed kernel included in the zip file of CM7.1.0.1, then i have format and wipe everything and flashed rom, but Touch doesn't work!!
Same thing with CM9!
I do not know what to invent to make it work!
I have flashed the official SE beta Ics kernel and everything works! means that the flash is correct. Right?
i have searched days for solution and didnt find yet, i have flashed stock modules, well i think so, i were on nightelfs kernel i decided to go to .283 kernel cuz batterylife, i were on night elf's kernel, went into recovery, installed stock modules, after that flashed .283 firmware and error, maybe this is a stupid question, BUT PLEASE DONT COME SAY USE SEARCH AASDJIASHD SH*T I SEARCHED FOR DAYS AND TRIED DIFFERENT SOLUTIONS
Okay tried again nightelf kernel ----> recovery ---> install wifi modules ---> kernel .283 = works now, wondering why that didnt work yesterday when i tried that something like 5 times 0.0
Sent from my MT15i using xda premium
Hi, I just want to know how to install CyanogenMod 9 on my Live, and X Kernel. I can't consider myself as a noob, since I have already flashed SE phones before, and now that I have my first smartphone (WT19i) I'm very happy with it and I've already root it and installed CWM. But the problem is I have never installed a Rom before, and I don't know how does they work, but I saw a video of a Live with CM9 installed and I really liked it, so I want to know how to do it and install X Kernel too. Has someone already try CM9? I would like to hear how is it going for you.... Thanks.
No u cant. Currently the xkernel only supports gb roms. Cm9 needs its own kernel.
And u probably need to update baseband too.
Ok thanks for your quick reply. So if I have ICS Stock Rom installed, what Kernel would you recommend me to save more battery life?
And is there a better ICS Rom than the Stock one? Because I would like to try something new..
Only stock or stock based rom will give best battery life.
Last time I try cm9 it got horrible battery life. But that was weeks ago. Hearing good thing about latest fxp cm9 126.
My personal favorite and daily driver is muiv4, with my own kernel. Miuiv4 is beautiful and got many cool feature that I need. But still a little bit battery drainer tho.
In the end it depends on your needs.
Want battery saver, use stock or custom rom based on stock.
Want blazing fast rom use cm9.
Want beautiful elegant rom use miuiv4.
is cyanogenmod9 has its built in stock kernel? or i will install kernel cyanogenmo9?
tsunamixtreme said:
is cyanogenmod9 has its built in stock kernel? or i will install kernel cyanogenmo9?
Click to expand...
Click to collapse
You need to install cyanogenmod kernel by fxp or the one provided in the zip file
It's a boot.img and the easiest way to flash it is using flashtool...
How to install custom roms/kernels is in my signature...
Hi guys,I installed WanamLite ROM 6.6 and Perseus kernel 36.3 with undervolt settings. My phone is ASV6 type. I had problem with my camera. It says "Can't connect to camera". I also tried third party camera like Camera360 and the Nexus 4 camera.
I installed AOSP ROMs like Temasek's CM10.1 with his kernel. But still no luck. The rest of things are working fine.
I flashed back to Stock ROM with latest 4.1.2 jellybean firmware.
But the weird thing is, why the camera are working only Stock ROM? It is still working although I rooted it.
Any ideas?
EDIT: I was thinking that it is a kernel issue, so I tried to flash other kernel. But still didn't work.
EDIT 2: Typo " why the camera are working only Stock ROM?"
Actually for AOSP roms the error is quite a know problem. Nevertheless Wanam is based on Samsung TW, hence camera should work fine.
chrismast said:
Actually for AOSP roms the error is quite a know problem. Nevertheless Wanam is based on Samsung TW, hence camera should work fine.
Click to expand...
Click to collapse
Thanks for replying, FYI I've flashed MIUI ROM v4 for a while. Still does't work. So I can confirm that I have the problem when installing a custom ROM.