Hi Guys,
I have a problem with my device, i rooted my HTC Desire X, it worked fine.
After trying to install a custom rom it fails, if I try to reboot it shows the HTC white screen after that screen it;s only a black screen.
I tried to boot in recovery mode and it starts TWRP, I installed the boot.img of the custom rom and installed the rom itself but which rom I try the screen still gets black after the white screen with HTC on it.
Can anyone please help?
MrMysakovich said:
Hi Guys,
I have a problem with my device, i rooted my HTC Desire X, it worked fine.
After trying to install a custom rom it fails, if I try to reboot it shows the HTC white screen after that screen it;s only a black screen.
I tried to boot in recovery mode and it starts TWRP, I installed the boot.img of the custom rom and installed the rom itself but which rom I try the screen still gets black after the white screen with HTC on it.
Can anyone please help?
Click to expand...
Click to collapse
What is your hboot and which rom are you trying to install?
GtrCraft said:
What is your hboot and which rom are you trying to install?
Click to expand...
Click to collapse
I Install [ROM] mySENSEdx+ RC3.5 (JB | Sense 4+) before i had mySENSEdx5 alpha 2 ~ Sense 5.0 my hboot is hboot 1.25.0002:... I make wipe and normal install.
MrMysakovich said:
I Install [ROM] mySENSEdx+ RC3.5 (JB | Sense 4+) before i had mySENSEdx5 alpha 2 ~ Sense 5.0 my hboot is hboot 1.25.0002:... I make wipe and normal install.
Click to expand...
Click to collapse
Do a full wipe again (system, data, cache, dalvik) and reinstall the rom and then install the boot.img with the installer. The installer wipes cache in fastboot which fixes problems with booting sometimes
GtrCraft said:
Do a full wipe again (system, data, cache, dalvik) and reinstall the rom and then install the boot.img with the installer. The installer wipes cache in fastboot which fixes problems with booting sometimes
Click to expand...
Click to collapse
Very THX It´s work very good once again thank you very much
MrMysakovich said:
Very THX It´s work very good once again thank you very much
Click to expand...
Click to collapse
Your welcome but PLEASE use the thanks button
GtrCraft said:
Do a full wipe again (system, data, cache, dalvik) and reinstall the rom and then install the boot.img with the installer. The installer wipes cache in fastboot which fixes problems with booting sometimes
Click to expand...
Click to collapse
I'm having the same issue, but this didn't solve it - have any more advice?
You are sure you have the right hboot version and recovery? Also, you did install a JB kernel along with a JB ROM? Last, you checked the kernel installer finished successfully?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Popmadon said:
I'm having the same issue, but this didn't solve it - have any more advice?
Click to expand...
Click to collapse
1. See if you are flashing rom on correct HBOOT i.e JB HBOOT 1.25.0002 for JB ROM
2. if you do not have S-OFF then use fastboot to flash kernels (you cannot flash kernels from recovery without S-OFF)
ankahuja said:
1. See if you are flashing rom on correct HBOOT i.e JB HBOOT 1.25.0002 for JB ROM
2. if you do not have S-OFF then use fastboot to flash kernels (you cannot flash kernels from recovery without S-OFF)
Click to expand...
Click to collapse
I've got the correct HBOOT, and I'm S-ON, but have been flashing the boot.img from bootloader.
I'm PROTO PVT btw, which always confused me
dansou901 said:
You are sure you have the right hboot version and recovery? Also, you did install a JB kernel along with a JB ROM? Last, you checked the kernel installer finished successfully?
Click to expand...
Click to collapse
Yessssss kernel finishes successfully each time - both are JB
Related
can any one help how can i fix wifi error on eve 3d coma
wifi issues are a boot image thing. [hint: flash a kernel]
Try flashing a different rom or use your Nano if you have one backed up.
what kernel will i flash?
Well what ROM are you using and what Android version do you have?
android 2.3.3, htc kernel i have just rooted my phone
You can try flashing the Stock kernel here:
http://forum.xda-developers.com/showthread.php?t=1197898
If that doesn't work you can try flashing Synergy which is 2.3.4 here (this comes with a 2.3.4 kernel and the latest build of android):
http://forum.xda-developers.com/showthread.php?t=1193948
If your flashing synergy then make sure you factory reset and wipe the Cache Partiton and Dalvik Cache in recovery.
Same with the stock kernel, except you dont need to factory reset for kernels.
thanks for the link i will try it today
can i use revolutionary recovery on this?
Worm1996 said:
can i use revolutionary recovery on this?
Click to expand...
Click to collapse
Yeah you can use Revolutionary Clock work mod recovery. I been using that ever since I got root with no problems at all.
Hi , i have a HTC EVO 3D GSM.
I just tried to flash VIPER3D 1.6.3[sense 4.1] with ROM Manager , i wiped all the data and cache but when the installation finished and phone rebooted , it was again in the SENSE 3.6 but all my apps and stuff were deleted.
Does any one has a clue what to do to flash correctly viper3d ??
gentrithumolli said:
Hi , i have a HTC EVO 3D GSM.
I just tried to flash VIPER3D 1.6.3[sense 4.1] with ROM Manager , i wiped all the data and cache but when the installation finished and phone rebooted , it was again in the SENSE 3.6 but all my apps and stuff were deleted.
Does any one has a clue what to do to flash correctly viper3d ??
Click to expand...
Click to collapse
Try flashing it via bootloader not ROM manager
donkeykong1 said:
Try flashing it via bootloader not ROM manager
Click to expand...
Click to collapse
I flashed again with 4ext in recovery mode , but now it doesn't boot.It reboots when it says system confirmed... :S:S:
Did you wipe everything? I wipe cache, dalvik cache, do factory reset and then wipe everything except memory card and then flash ROM
Sent from Mwakious powered EVO 3D using Tapatalk 2
What HBOOT version are you. and did you use the cdma or gsm version of viper?
TehJibba said:
What HBOOT version are you. and did you use the cdma or gsm version of viper?
Click to expand...
Click to collapse
I'm on HBOOT 1.53.7777 and i used the GSM version.
If i remember right ( i used the cdma version for a bit) i think you need to be on hboot 1.58 in order for it to boot. I could be wrong tho
TehJibba said:
If i remember right ( i used the cdma version for a bit) i think you need to be on hboot 1.58 in order for it to boot. I could be wrong tho
Click to expand...
Click to collapse
Do you know how to upgrade or downgrade hboot , so i can boot again because now im on bootloop.
gentrithumolli said:
Do you know how to upgrade or downgrade hboot , so i can boot again because now im on bootloop.
Click to expand...
Click to collapse
**EDIT** after reading the latest posts it should work with your current hboot. If you are s-on then try going to 4ext recovery then tools > enable smart flash
also make sure u do a full wipe of everything except the sdcard and then wipe cache-dalvik too then flash the rom
TehJibba said:
**EDIT** after reading the latest posts it should work with your current hboot. If you are s-on then try going to 4ext recovery then tools > enable smart flash
also make sure u do a full wipe of everything except the sdcard and then wipe cache-dalvik too then flash the rom
Click to expand...
Click to collapse
OK , i'll try it now , hope it works !
TehJibba said:
**EDIT** after reading the latest posts it should work with your current hboot. If you are s-on then try going to 4ext recovery then tools > enable smart flash
also make sure u do a full wipe of everything except the sdcard and then wipe cache-dalvik too then flash the rom
Click to expand...
Click to collapse
EDIT : It didn't work for that . do you know any ROM that works with hboot 1.53.7777 just to boot my phone ?
[SOLVED] with PG86IMG.zip.
For those who have same problem as mine , you just have to download this file and put it in the sd card , reboot in to booloader and wait for the "pres volume up/down" thing , update the hboot and than you will have hboot 1.49.
THANK YOU ALL WHO HELPED ME.
So I had a Desire C for an year or so, and I flashed the heck out of it, so I am fairly experienced with flashing, rooting, adb/fastboot commands and that kind of stuff. For two weeks now I have a Desire X. But after flashing Half-Sense, myONEdx+, mySENSEdx+ (ofc. after flashing boot.img for each one) I just get a black screen (backlit black screen, so it's actually on). But after flashing to a non-backup stock rom (including ones with busybox, init.d support) they work fine. So essencialy I can't flash anything non-stock. Wat do?
Same here, flashed fulmix rom black screen and then reboot to recovery...
Restored backup and woeking...
Using TWRP 2.6 and my own kernel just write protection disabled..
Sent from my HTC Desire X using xda premium
jeyko said:
So I had a Desire C for an year or so, and I flashed the heck out of it, so I am fairly experienced with flashing, rooting, adb/fastboot commands and that kind of stuff. For two weeks now I have a Desire X. But after flashing Half-Sense, myONEdx+, mySENSEdx+ (ofc. after flashing boot.img for each one) I just get a black screen (backlit black screen, so it's actually on). But after flashing to a non-backup stock rom (including ones with busybox, init.d support) they work fine. So essencialy I can't flash anything non-stock. Wat do?
Click to expand...
Click to collapse
On which Hboot are you, btw the best TWRP recovery is 2.5 because 2.6 is alpha
GtrCraft said:
On which Hboot are you, btw the best TWRP recovery is 2.5 because 2.6 is alpha
Click to expand...
Click to collapse
I tried on TWRP (dunno which version), the official CWM one and (my favourite and best) PhilZ CWM. I am on the JB hboot 1.25.0002
jeyko said:
I tried on TWRP (dunno which version), the official CWM one and (my favourite and best) PhilZ CWM. I am on the JB hboot 1.25.0002
Click to expand...
Click to collapse
You don't install everything with the ICS Hboot way? and did you do a full wipe (system, data, dalvik cache and cache)?
GtrCraft said:
You don't install everything with the ICS Hboot way? and did you do a full wipe (system, data, dalvik cache and cache)?
Click to expand...
Click to collapse
Yes, SIDENOTE/offtopic I had a soft brick after a few days of use after trying to install ACID audo which led me to reinstall my Windows so the adb drivers work properly and then I could adb push another vanilla zip. All this because I don't have another device with sdcard support lol.
jeyko said:
Yes, SIDENOTE/offtopic I had a soft brick after a few days of use after trying to install ACID audo which led me to reinstall my Windows so the adb drivers work properly and then I could adb push another vanilla zip. All this because I don't have another device with sdcard support lol.
Click to expand...
Click to collapse
Try to flash a JB rom and after that, wipe cache and dalvik again
GtrCraft said:
Try to flash a JB rom and after that, wipe cache and dalvik again
Click to expand...
Click to collapse
That's what I've been doing but mkay, gonna flash fulmix and report in 15 mins or so.
jeyko said:
That's what I've been doing but mkay, gonna flash fulmix and report in 15 mins or so.
Click to expand...
Click to collapse
Maybe wiping cache in fastboot will work: ''fastboot erase cache''
GtrCraft said:
Maybe wiping cache in fastboot will work: ''fastboot erase cache''
Click to expand...
Click to collapse
Yeah, I do it every time, and this try on flashing fulmix failed too. I don't get what the problem would be. Is there a way to logcat everything?
jeyko said:
Yeah, I do it every time, and this try on flashing fulmix failed too. I don't get what the problem would be. Is there a way to logcat everything?
Click to expand...
Click to collapse
Yeah if you are in bootloader or recovery it is possible, although I'm not that good with logcat's
Hi there!
I've recently flashed xpirt's unofficial port of MIUI v5. However, I'm not seeing any MIUI elements in my phone except 2 apps (which do not work). They are MiCloud and MiCredits. Other than those apps, my phone is pretty much a sensed based phone after flashing the phone.
Each time the phone boots up, a pop up will appear saying : Unfortunately, Xiaomi service framework has stopped. Same thing happens when i try to start the two related apps.
My order of flashing
Format /data
Format /cache
Format /system
Format /delvikcache
flash xpirt miui v5 #1
(at this point I repeated steps 1,2 & 4 after multiple failed attempts to get my miui working)
flash xpirt miui v5 #2
reboot
Did i flash it wrongly?
I have a working CWM recovery already.
Any help is appreciated!! My phone is in working condition even without the miui theme, but meh, wouldn't i just return to the stock rom?
Did a lot of work just to get my JB version on DX too! :crying:
Android 4.1.1
Hboot 1.25
fulmix.Kernel #2
Tried searching for any similar issues faced but seems like I'm the only one facing the issue.
Not even sure if it's supposed to be how it is... not enough screenshots around from other users to show what I should see upon starting up.
You have a wrong CWM recovery for JB hboot.
Use TWRP recovery for JB
Thanks!
ckpv5 said:
You have a wrong CWM recovery for JB hboot.
Use TWRP recovery for JB
Click to expand...
Click to collapse
Wow, that works for me! Thanks! :good::good:
I have the exact same problem
Hboot 1.25
unlocked with WinDroid HTC Desire X Toolkit v3.0
tried flashing the rom with the included TWRP and CWM.
phone boots, i get the error "xiaomi framework stopped" and the two mentioned apps.
flash order like aarontanws
do i need superuser before i flash the rom?
any other suggestions?
cheers
I'm not sure if the Windroid Tool checks your hboot and matches the right TWRP version. I for myself use TWRP 2.6.3.0 on JB hboot, works perfectly for me. You can also use PhilZ Touch if you want, but be sure to choose the JB version. Given that, flash the recoveries manually via fastboot, perform a full wipe, install the first package along with the second one.
TWRP 2.6.3.0 here.
I get an Error when I try wiping the dalvik cache.
flashed TWRP 2.5.0.0 via command line
no Error wiping dalvik + flashes MIUI successfully
fleischverpackung said:
TWRP 2.6.3.0 here.
I get an Error when I try wiping the dalvik cache.
flashed TWRP 2.5.0.0 via command line
no Error wiping dalvik + flashes MIUI successfully
Click to expand...
Click to collapse
Best tip I can give you, don't use a toolkit. Do everything manually
SOLVED
hi, sorry bad english
i got a htc desire x and begann to read this tut about unlockinging, rooting, installing custom roms
http://forum.xda-developers.com/showthread.php?p=36138808#post36138808
i unlocked and rooted the dx, then i installed this rom: STOCK Jelly Bean with Sense 4+ build 2.20.401.6 for Desire X
http://forum.xda-developers.com/showthread.php?t=2239511
were not so happy, would try this one: ViMiRo ROM v1.0-1
http://forum.xda-developers.com/showthread.php?t=2797110
did a full wipe, installed the vimiro rom, Flashed boot.img from zip via fastboot and rebooted
but then the dx stuck on the cyanogenmod logo and nothing more happen
has anyone please a solution for this, or some tipps
SOLVED
4js said:
hi, sorry bad english
i got a htc desire x and begann to read this tut about unlockinging, rooting, installing custom roms
http://forum.xda-developers.com/showthread.php?p=36138808#post36138808
i unlocked and rooted the dx, then i installed this rom: STOCK Jelly Bean with Sense 4+ build 2.20.401.6 for Desire X
http://forum.xda-developers.com/showthread.php?t=2239511
were not so happy, would try this one: ViMiRo ROM v1.0-1
http://forum.xda-developers.com/showthread.php?t=2797110
did a full wipe, installed the vimiro rom, Flashed boot.img from zip via fastboot and rebooted
but then the dx stuck on the cyanogenmod logo and nothing more happen
has anyone please a solution for this, or some tipps
Click to expand...
Click to collapse
what recovery version do you have \ installer ? and post your bootloader details
the rom vimiro has not cyanogenmod logo
[
nek46 said:
what recovery version do you have \ installer ? and post your bootloader details
the rom vimiro has not cyanogenmod logo
Click to expand...
Click to collapse
recovery = twrp 2.6.30
bootloader details - not sure what you mean?
maybe this: hboot 1.25.002
i thought that the vimiro has no cm logo, but when i flashed the rom and fastboot the boot.img i got no errors, it says sucessfully and ok
4js said:
[
recovery = twrp 2.6.30
bootloader details - not sure what you mean?
maybe this: hboot 1.25.002
i thought that the vimiro has no cm logo, but when i flashed the rom and fastboot the boot.img i got no errors, it says sucessfully and ok
Click to expand...
Click to collapse
everything is correct, try another rom, I do not understand why not start the rom
4js said:
hi, sorry bad english
i got a htc desire x and begann to read this tut about unlockinging, rooting, installing custom roms
http://forum.xda-developers.com/showthread.php?p=36138808#post36138808
i unlocked and rooted the dx, then i installed this rom: STOCK Jelly Bean with Sense 4+ build 2.20.401.6 for Desire X
http://forum.xda-developers.com/showthread.php?t=2239511
were not so happy, would try this one: ViMiRo ROM v1.0-1
http://forum.xda-developers.com/showthread.php?t=2797110
did a full wipe, installed the vimiro rom, Flashed boot.img from zip via fastboot and rebooted
but then the dx stuck on the cyanogenmod logo and nothing more happen
has anyone please a solution for this, or some tipps
Click to expand...
Click to collapse
Try flashing another kernel. You somehow flashed the CM boot.img.
nightwalkerkg said:
Try flashing another kernel. You somehow flashed the CM boot.img.
Click to expand...
Click to collapse
Not quite... If he flashed CM boot.img for Sense ROM, he shouldn't see boot animation at all. What he obviously did is flashing a CM ROM and CM boot.img, but one that won't boot the CM ROM. Bootanimation is part of the ROM, not of kernel... So what I would suggest for @4js: Redownload ViMiRo Rom, also redownload any Sense JB kernel from Original Development you like, wipe your phone and reflash everything. That should solve your issues.
nek46 said:
everything is correct, try another rom, I do not understand why not start the rom
Click to expand...
Click to collapse
i tried [ROM][PA 2.99][4.1.2] Paranoid Android UNOFFICIAL [protou] with the double wipe and the gapps and finally
i now stuck at the new paranoid android logo,
nightwalkerkg said:
Try flashing another kernel. You somehow flashed the CM boot.img.
Click to expand...
Click to collapse
i did not, i really double checked it
dansou901 said:
Not quite... If he flashed CM boot.img for Sense ROM, he shouldn't see boot animation at all. What he obviously did is flashing a CM ROM and CM boot.img, but one that won't boot the CM ROM. Bootanimation is part of the ROM, not of kernel... So what I would suggest for @4js: Redownload ViMiRo Rom, also redownload any Sense JB kernel from Original Development you like, wipe your phone and reflash everything. That should solve your issues.
Click to expand...
Click to collapse
i will try and give feedback
not succeded
got it cheap from 2nd hand, could a hardware defect cause the problems?
4js said:
not succeded
got it cheap from 2nd hand, could a hardware defect cause the problems?
Click to expand...
Click to collapse
ok, what exactly did you try?
cause im a beginner in flashing smartphones, there are some things i don't understand
1) when i do a factory reset with twrp 2.6.3.0, there should be wiped data, cache and dalvik, .android_secure
but when i afterwards do a advanced wipe everything succeded, exept dalvik cache, there it fail
2) after a succeded factory reset without os installed, i reboot, and then also i stuck at a boot logo
shouldn't that not be wiped too?
could an other recover.img from http://forum.xda-developers.com/showthread.php?t=2502327 help?
the last succesful rom installed was cm-10.1-20140624-UNOFFICIAL-protou_v2.zip, not the one i wrote in first post
@dansou901
i tried different roms, exactly how it was explained, but never succedded, after rebooting i always stuck at the boot logo
4js said:
cause im a beginner in flashing smartphones, there are some things i don't understand
1) when i do a factory reset with twrp 2.6.3.0, there should be wiped data, cache and dalvik, .android_secure
but when i afterwards do a advanced wipe everything succeded, exept dalvik cache, there it fail
2) after a succeded factory reset without os installed, i reboot, and then also i stuck at a boot logo
shouldn't that not be wiped too?
could an other recover.img from http://forum.xda-developers.com/showthread.php?t=2502327 help?
the last succesful rom installed was cm-10.1-20140624-UNOFFICIAL-protou_v2.zip, not the one i wrote in first post
@dansou901
i tried different roms, exactly how it was explained, but never succedded, after rebooting i always stuck at the boot logo
Click to expand...
Click to collapse
Try the TWRP 2.5.0.0 for JB, it is reported to be most stable. Hopefully this resolves the issues for you.
dansou901 said:
Try the TWRP 2.5.0.0 for JB, it is reported to be most stable. Hopefully this resolves the issues for you.
Click to expand...
Click to collapse
thanks for quick reply, i will try and give then feedback
twrp 2.5.0.0 did it
it was a really full wipe, and now i'm at vimiro 1.01
thanks to everybody for the help, special thanks to dansou901 for helping and his excellent tutorial