GT-I9105 display compatibility. - Galaxy S II Q&A, Help & Troubleshooting

Hi there!
I have I9105 S2+. Accidentally I have broken the screen. I would like to ask if I can replace the broken display on the screen for GT-I9100 (S2). It is much cheeper.
Thanks a lot for reply
Cheers!

..

I think OP meant to put S2 display into S2plus phone

Yep you're right. Poor reading skills on my part

f-r said:
I think OP meant to put S2 display into S2plus phone
Click to expand...
Click to collapse
Exactly!
I have plan to install display from Galaxy S2 into Galaxy S2 Plus. Screen size is similar, even the socket. Is there any chance to do it?

iFixit have disassebly guides for most of the popular handsets out thete. Look for the disassebled S2 and S2plus to compare the parts visually.

f-r said:
iFixit have disassebly guides for most of the popular handsets out thete. Look for the disassebled S2 and S2plus to compare the parts visually.
Click to expand...
Click to collapse
I have noticed about that I see it will fit. Otherwise I'm affraid about the digitalizer can work wrong. For example when I press numer 1 on the dialler phone recognize numer 4. I asked not about the fitting itself but about the futuer proper work.

it works - almost
Don't know if anyones still interested, but i got a galaxy SII with broken mainboard and one SII Plus with broken display from friends. so i thought i'd give it a try.
after disassembling both i found that only one connector for the three buttons below the screen was changed - two extra pins. connecting all other connectors the screen was working. and after wiggling the buttonconnector the home button worked. so i cut off some plastic so the connector fits.
All the buttons work now, only the button backlighting isn't working.
its not fully working but functional

Related

[Q] Is s5830 screen compatible with s5830i

Hi all,
I have my S5830i galaxy ace with broken screen digitizer.A friend of mine has fully bricked galaxy ace S5830... so I was wondering if I could take his front panel(digitizer+screen) and put it on my S5830i.Are the connectors same ? will it fit onto motherboard of my phone? thank you in advance (I cant take his digitizer because it's glued to metal front panel so I would probably broke it while attempting to lift it.My only option is to take whole panel)
hunt3r_ said:
Hi all,
I have my S5830i galaxy ace with broken screen digitizer.A friend of mine has fully bricked galaxy ace S5830... so I was wondering if I could take his front panel(digitizer+screen) and put it on my S5830i.Are the connectors same ? will it fit onto motherboard of my phone? thank you in advance (I cant take his digitizer because it's glued to metal front panel so I would probably broke it while attempting to lift it.My only option is to take whole panel)
Click to expand...
Click to collapse
Take it to someone who repairs mobile, he might do it, cause I've seen some people changing displays, even using Chinese display on Samsung mobiles ......

[Q] Replacement LCD Screens - from S3 CLONES?

Hi All,
apologies if i have posted this in the wrong section, if so, please move.
I have been searching without any success of finding a Samsung S3 CLONE that would use a LCD Screen the Original Samsung S3 would recognise. I have not found images in the internals of these clones aswell
I wonder if anyone here or outside this forum has been successfull in finding a Clone S3 that uses the same LCD configuration compatible with the real S3.
I have seen many replacement LCD screens which claim to be compatible but are not AMOLED or have the exact resolution as the S3, so are these "replacement" screen LCDs really used in the Clone.
any one here able to shed some light on this possibility? :fingers-crossed:
Impossible as they are different technology
LCD and AMOLED
Even through you found right size,, right connected LCD screen and attached it into S3, still won't work due to driver problem or something like that
Sent from my GT-I9300 using xda premium
qtwrk said:
Impossible as they are different technology
LCD and AMOLED
Even through you found right size,, right connected LCD screen and attached it into S3, still won't work due to driver problem or something like that
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
but im wondering what abt these replacement LCDs that are lower in resolution etc and seems to work with the S3. where are these screens from and are these screens used in the clones?
as for drivers, im sure people in this forum can mod something to make it work?
fza2007 said:
but im wondering what abt these replacement LCDs that are lower in resolution etc and seems to work with the S3. where are these screens from and are these screens used in the clones?
as for drivers, im sure people in this forum can mod something to make it work?
Click to expand...
Click to collapse
Serious?
Those clones, just another model of phone which "accidentally" has very same outer appears as Galaxy S III, doesn't mean they are compatible.
Sent from my GT-I9300 using xda premium
no way, don't even think about trying it
yes you can
I've installed three different types, all low resolution and one was two small you would see a small black strip at the top because lcd was two short. But they all worked , if you own a repair shop I think its important to figure out who's making these lcd because when a new model comes out and the assembly is 250$ and Samsung designed the s4 to break at the lcd not the glass , so lots of ppl need lcd. So the price states high for a wile , meanwhile the iphone screens break at the glass so there's millions of good lcds floating around the price drops fast , the iphone 5s is already down to 80$ from its original 250 just two months ago . So the iphone parts drop in price fast but for galaxy parts we need to find who makes these clone lcds so our galaxy customers have a alternative repair option under 300$
We do the 5s for 150$ , the part is 80$
The s4 part is 209 so we have to charge 269 installed.
Insurance deductible is 150....
611CellPhoneRepair said:
I've installed three different types, all low resolution and one was two small you would see a small black strip at the top because lcd was two short. But they all worked , if you own a repair shop I think its important to figure out who's making these lcd because when a new model comes out and the assembly is 250$ and Samsung designed the s4 to break at the lcd not the glass , so lots of ppl need lcd. So the price states high for a wile , meanwhile the iphone screens break at the glass so there's millions of good lcds floating around the price drops fast , the iphone 5s is already down to 80$ from its original 250 just two months ago . So the iphone parts drop in price fast but for galaxy parts we need to find who makes these clone lcds so our galaxy customers have a alternative repair option under 300$
We do the 5s for 150$ , the part is 80$
The s4 part is 209 so we have to charge 269 installed.
Insurance deductible is 150....
Click to expand...
Click to collapse
Thanks for this great info.
Anyway, Im sorry if i have to ask another question but it just related to this topic. i got a cloned version of Samsung GT-i9060 (MT6575chip). This was given to me by a friend but the problem is the LCD is broken... I dont know if the original LCD for samsung GT-i9060 will work on my cloned version. Hope you can shed some light into this as i have a hard time looking for the replacement LCD of the cloned version.
Thanks a lot...
rayfloyd170 said:
Thanks for this great info.
Anyway, Im sorry if i have to ask another question but it just related to this topic. i got a cloned version of Samsung GT-i9060 (MT6575chip). This was given to me by a friend but the problem is the LCD is broken... I dont know if the original LCD for samsung GT-i9060 will work on my cloned version. Hope you can shed some light into this as i have a hard time looking for the replacement LCD of the cloned version.
Thanks a lot...
Click to expand...
Click to collapse
any infor where i can buy
replacement LCD for CLONE samsung GT-i9060?

Samsung Galaxy SIII Touchscreen compatibility

So, okay. I've searched everywhere but found no reference of Samsung S3's touchscreen compatibility.
There are at least 3?? variants of our beloved S3, but does the touchscreen of a I9300 fit that of SHV-E210L?
I have the E210L with a disabled touch after rooting. Now, I want to change its touchscreen but don't want to buy something I'll regret later. I've done everything from restoring, factory resetting, and re-flashing the FW but still the touch is disabled.
So, XDA-folks. Does the S3 have touchscreen compatibility or does it fit to all Samsung S3 variants?
Bump? Anybody?
Easiest way would be check those selling replacement screen assemblies, if one screen fits several models then you may have your answer.
However, as flashing the wrong kernel seems to always destroy the touchscreen I would doubt they are compatible.
I also don't think you can change just the digitiser, it's glued to the oled and unlike the glass screen is very fragile.
boomboomer said:
Easiest way would be check those selling replacement screen assemblies, if one screen fits several models then you may have your answer.
However, as flashing the wrong kernel seems to always destroy the touchscreen I would doubt they are compatible.
I also don't think you can change just the digitiser, it's glued to the oled and unlike the glass screen is very fragile.
Click to expand...
Click to collapse
Hey man, thanks for the reply.
I'm thinking about replacing the whole screen, not just the digitizer as I don't have any experience at all with separating the touch and LCD with the heat gun..
Unfortunately, we don't have an eBay-like service here in the Philippines (which do returns) so trying/fitting screens is quite out of my options. Also worth noting is the E210L's antenna attached at the back cover, I'm afraid that if I do buy an I9300's screen it would somehow get in the way.. It's detachable though, but yeah..well..you know. :silly:
Guess I have to resort with phone techs scattered throughout the area. I just hope they don't make matters worse with my phone. :fingers-crossed:
Thanks again!
Regards,
Rae

[Q] Lost Super Amoled after replacing screen ?!

Hi,
A friend of mine currently replaced her I9300 screen after she cracked it. But I noticed that the phone screen isn't Super Amoled anymore
I compared her S3 Display to mine and mine clearly have BETTER display quality!
Now, since I wrongly flashed N7100 Kernel onto mine and froze the Touch Module; I need a whole new screen assembly since I9300 LCD and Touch Digitizer seems to be HARD to dissociate
My question now is:
Will screen replacement makes mine lose the Super Amoled feature like my friend's one ?
Do I need a specific screen assembly ? If so, How do I identify this before buying it ?
Thank you in advance.
I think that your friend has got a lower quality replacement display. If you want to replace your screen, you should look not for the cheapest one or atleast do some research (check that display you will buy is original)
War3st said:
I think that your friend has got a lower quality replacement display. If you want to replace your screen, you should look not for the cheapest one or atleast do some research (check that display you will buy is original)
Click to expand...
Click to collapse
But HOW do I tell whether it's genuine (original if you want) or replicate (fake) ?
And FYI, she bought it for $100, isn't that enough to pay a genuine one ?
No, that isn't a genuine screen assembly. Buy it from a reputable retailer -if you can find one, not an ebay or amazon reseller.
boomboomer said:
No, that isn't a genuine screen assembly. Buy it from a reputable retailer -if you can find one, not an ebay or amazon reseller.
Click to expand...
Click to collapse
Thank you.
But it's really HARD to find SAMSUNG Retellers here in The Bronx
Thank you anyway.
Just passing by... can't you just reflash your phone with correct kernel?
Nees3 said:
Just passing by... can't you just reflash your phone with correct kernel?
Click to expand...
Click to collapse
Already discussed :good:
There's NO miracle for this issue other than replacing the Screen (LCD + Touch Digitizer).
I understood WHY it burned the Touch Module lol N7100 uses bigger screen than I9300, so it pushes more power to the screen, unfortunately I9300 hardwares cannot hold such power. Maybe that's WHY N7100 have 1,6Ghz CPU while I9300 have 1,4Ghz (even if it's about the same hardware); also the battery voltage: N7100 uses genuinely 2600mAh while I9300 uses 2100mAh.
Anyway, I sold the device (as it was) now moving to something new (maybe another S3).

Is it possible to replace i9300-mainboard with 9305?

I own a Samsung Galaxy SIII and I love that device. But the main thing that bothers me is that it's LTE-incapable. That's why I am playing with idea to replace its mainboard with a LTE-capable mainboard of an i9305. Since I disassembled that device and replaced LCD and several case parts a short while ago by myself I will surely be able to replace the mainboard as well. The dimensions of both mainboards looks the same to me. But I am not sure if all the connectors placed the same and if the rest of the hardware (cameras, sensors) will work with the i9305-mainboard.
I would appreciate any thoughts on that topic and some support would be nice!
Cheers
Djablos said:
I own a Samsung Galaxy SIII and I love that device. But the main thing that bothers me is that it's LTE-incapable. That's why I am playing with idea to replace its mainboard with a LTE-capable mainboard of an i9305. Since I disassembled that device and replaced LCD and several case parts a short while ago by myself I will surely be able to replace the mainboard as well. The dimensions of both mainboards looks the same to me. But I am not sure if all the connectors placed the same and if the rest of the hardware (cameras, sensors) will work with the i9305-mainboard.
I would appreciate any thoughts on that topic and some support would be nice!
Cheers
Click to expand...
Click to collapse
afaik the devices have different display controllers wich are not compatible with each other. for some reasons the imei will be cleared after replacing.
I know from some cases where users of i9305 let repair their screens, but by mistake they placed a i9300 screen and then the problem appeared.
No, they are not compatible.
Sent from my HTC One M9 using Tapatalk

Categories

Resources