Hi guys, im using the international version i9300. i was trying to root my phone and it fail. then when i reboot it, it shows this message. what should i do? how can i downgrade from 4.2.2 to 4.1.2? thanks alot people.
hihihixx said:
Hi guys, im using the international version i9300. i was trying to root my phone and it fail. then when i reboot it, it shows this message. what should i do? how can i downgrade from 4.2.2 to 4.1.2? thanks alot people.
Click to expand...
Click to collapse
whats the message shown after reboot? to downgrade simply download the desired firmware from SamMobile and flash it using Odin.
hihihixx said:
Hi guys, im using the international version i9300. i was trying to root my phone and it fail. then when i reboot it, it shows this message. what should i do? how can i downgrade from 4.2.2 to 4.1.2? thanks alot people.
Click to expand...
Click to collapse
You start by reading the basics before flashing .
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
Related
Hi guys,
I have an international galaxy s3 rooted phone.I'm definitely new to all those rooting stuff,so i'm writing those with my limited knowledgeI have a stock rom.I didn't install any other rom.I have 4.0.4 version.Today ı wanted to install an OTA update.It downloaded the file.But after that it didn't go well and it was stuck in cwm recovery mode.I couldn't go any further,it was written that the 'signature verification failed,installation aborted'.I just wanted to ask you that how i can solve this problem.Do i have to unroot and update or is there any other solution for that?Thanks so much.
cenk1303 said:
Hi guys,
I have an international galaxy s3 rooted phone.I'm definitely new to all those rooting stuff,so i'm writing those with my limited knowledgeI have a stock rom.I didn't install any other rom.I have 4.0.4 version.Today ı wanted to install an OTA update.It downloaded the file.But after that it didn't go well and it was stuck in cwm recovery mode.I couldn't go any further,it was written that the 'signature verification failed,installation aborted'.I just wanted to ask you that how i can solve this problem.Do i have to unroot and update or is there any other solution for that?Thanks so much.
Click to expand...
Click to collapse
Use next time the search, please...
http://forum.xda-developers.com/search.php?searchid=58891747
dfMails said:
Use next time the search, please...
http://forum.xda-developers.com/search.php?searchid=58891747
Click to expand...
Click to collapse
Thanks
The link appears to be dead. Anyone got another? Thanks
duskdevilza said:
The link appears to be dead. Anyone got another? Thanks
Click to expand...
Click to collapse
Signature Verification failed means that the zip was not signed or improperly signed..in CWM set the option to not check for signature verification and then try..
Okay so lasnight i tried to root my sg s2 and i obviusly did it rong and now when i turn my phone on it comes up with a messige saying... Firmwere upgrade encounted an issue. i am on virsen 4.0.4 wxlpy plese hepl !!!
BOKxLEGEND said:
Okay so lasnight i tried to root my sg s2 and i obviusly did it rong and now when i turn my phone on it comes up with a messige saying... Firmwere upgrade encounted an issue. i am on virsen 4.0.4 wxlpy plese hepl !!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1746794
To unbrick it just flash stock rom I recommend u xxlsj here's the guide
http://droidviews.com/2012/leaked-samsung-4-1-2-xxlsj-firmware-rootedgalaxy-s2/
ankur.co.in said:
To unbrick it just flash stock rom I recommend u xxlsj here's the guide
http://droidviews.com/2012/leaked-samsung-4-1-2-xxlsj-firmware-rootedgalaxy-s2/
Click to expand...
Click to collapse
That isnt "unbricking" because his device is not "bricked".
This is starting to get absolutely ridiculous now the amount of people who are using bricked term faaaaaaaaaaaaaaaaaaaaaaaaaaaaaar to loosely.
BOKxLEGEND said:
Okay so lasnight i tried to root my sg s2 and i obviusly did it rong and now when i turn my phone on it comes up with a messige saying... Firmwere upgrade encounted an issue. i am on virsen 4.0.4 wxlpy plese hepl !!!
Click to expand...
Click to collapse
Your device is not "bricked", you just screwed system partition up. Just go into download mode and re-flash a stock rom or custom kernel via ODIN.
If you had bothered to use search button or browse forum for a few seconds you would already know this.
TheATHEiST said:
If you had bothered to use search button or browse forum for a few seconds you would already know this.
Click to expand...
Click to collapse
This. Search next time, you'll get your answer quicker.
hello everyone just looking advice on the above title and which order should they be done? i have tryed doing all of these apart from the rom but had no success getting bit frustrated with it at the moment, im currently on 4.3 build number JSS15J.I9300XXUGNA5, im in uk and on o2 network thank you for your time
clocker-droid said:
hello everyone just looking advice on the above title and which order should they be done? i have tryed doing all of these apart from the rom but had no success getting bit frustrated with it at the moment, im currently on 4.3 build number JSS15J.I9300XXUGNA5, im in uk and on o2 network thank you for your time
Click to expand...
Click to collapse
S3 has already unlocked bootloader from default. You just need to root your device, flash a recovery and flash a ROM through recovery. Easy
GeekyDroid said:
S3 has already unlocked bootloader from default. You just need to root your device, flash a recovery and flash a ROM through recovery. Easy
Click to expand...
Click to collapse
no problem whats the best way to root and flash recovery i want to do this properly so i dont run into any problems thank you for the quick reply
Read the sticky thread in general forum.
So as you can see I am a noob here. Noob at rooting too. Well I tried using Odin to flash my phone before rooting and now I get an error that says "Unauthorized actions have been detected. Tap here for more information."
I have the Verizon S4 and im just looking for some help on getting a quick root to my phone. TowelRoot doesn't seem to be supported by my phone.
gb342002 said:
So as you can see I am a noob here. Noob at rooting too. Well I tried using Odin to flash my phone before rooting and now I get an error that says "Unauthorized actions have been detected. Tap here for more information."
I have the Verizon S4 and im just looking for some help on getting a quick root to my phone. TowelRoot doesn't seem to be supported by my phone.
Click to expand...
Click to collapse
Which build are you on? (Nc5/ng6/nk1)
Hightower24 said:
Which build are you on? (Nc5/ng6/nk1)
Click to expand...
Click to collapse
When this happened I had flashed to NG6. Now it appears I took the OTA update and am on NK1. Is NK1 an issue for rooting since its fairly new?
gb342002 said:
When this happened I had flashed to NG6. Now it appears I took the OTA update and am on NK1. Is NK1 an issue for rooting since its fairly new?
Click to expand...
Click to collapse
No issue at all. Here's the thread: http://forum.xda-developers.com/showthread.php?t=2959613
Hightower24 said:
No issue at all. Here's the thread: http://forum.xda-developers.com/showthread.php?t=2959613
Click to expand...
Click to collapse
It says you must be rooted first....
gb342002 said:
It says you must be rooted first....
Click to expand...
Click to collapse
You can try gigilies method to downgrade through Odin http://forum.xda-developers.com/showthread.php?t=2720163
Hello Guy's, anyone could help me with step-by-step guide how to root my Galaxy s6+ edge?
Anroid Version: 6.0.1
My model number's: SM-G928F
Build Number: MMB29K.G928FXXU3BPJ3
Thanks! Take care Lads!
Revuella said:
Hello Guy's, anyone could help me with step-by-step guide how to root my Galaxy s6+ edge?
Anroid Version: 6.0.1
My model number's: SM-G928F
Build Number: MMB29K.G928FXXU3BPJ3
Thanks! Take care Lads!
Click to expand...
Click to collapse
Here the guide using CF-Auto Root:
http://forum.xda-developers.com/s6-edge-plus/general/guide-6-0-1-g928fxxs2bpd2-t3371526
dcastro172 said:
Here the guide using CF-Auto Root:
http://forum.xda-developers.com/s6-edge-plus/general/guide-6-0-1-g928fxxs2bpd2-t3371526
Click to expand...
Click to collapse
Thanks, but my firmware is diffrent, its G928FXXU3BPJ3, not G928FXXS2BPD2
Revuella said:
Thanks, but my firmware is diffrent, its G928FXXU3BPJ3, not G928FXXS2BPD2
Click to expand...
Click to collapse
Looks at https://autoroot.chainfire.eu/ for your specific firmware, if there's no, maybe you flash the PD2 firmware on you phone, It's same device, right? Only build date change.
dcastro172 said:
Looks at https://autoroot.chainfire.eu/ for your specific firmware, if there's no, maybe you flash the PD2 firmware on you phone, It's same device, right? Only build date change.
Click to expand...
Click to collapse
There's no firmware for my number, and yes its same device but i wont be taking any chances, 'MAYBE' to brick my phone
Revuella said:
There's no firmware for my number, and yes its same device but i wont be taking any chances, 'MAYBE' to brick my phone
Click to expand...
Click to collapse
Flashing a old or new firmware build on your phone, no chances of brick, unless your computer catches fire in the process.
There's TWRP for your phone in the reserved XDA forum? Flash it using Odin and flash SuperSU system-less. CF-Auto Root does it, flash a patched custom recovery and flash root package.
dcastro172 said:
Flashing a old or new firmware build on your phone, no chances of brick, unless your computer catches fire in the process.
There's TWRP for your phone in the reserved XDA forum? Flash it using Odin and flash SuperSU system-less. CF-Auto Root does it, flash a patched custom recovery and flash root package.
Click to expand...
Click to collapse
Well, to be honest im new to all of this ROOT'ing (on my own), so im just trying to make sure that i wont kill my phone, so no hard feelings Mate. Anyway, in that case - should i just follow instructions from this thread? http://forum.xda-developers.com/s6-edge-plus/general/guide-6-0-1-g928fxxs2bpd2-t3371526
Revuella said:
Well, to be honest im new to all of this ROOT'ing (on my own), so im just trying to make sure that i wont kill my phone, so no hard feelings Mate. Anyway, in that case - should i just follow instructions from this thread? http://forum.xda-developers.com/s6-edge-plus/general/guide-6-0-1-g928fxxs2bpd2-t3371526
Click to expand...
Click to collapse
Using Odin in default ways won't will kill your phone, UNLESS you do it in wrong way.
Read here: http://forum.xda-developers.com/s6-...ecovery-official-twrp-galaxy-s6-edge-t3354492
Do all steps in this thread, then install SuperSU zip package using TWRP.
Here just for reference: http://forum.xda-developers.com/moto-g4-plus/how-to/root-systemless-rooting-supersu-2-74-2-t3405772
Jump to number 5-8 step and please, don't put fire on your phone.
dcastro172 said:
Using Odin in default ways won't will kill your phone, UNLESS you do it in wrong way.
Read here: http://forum.xda-developers.com/s6-...ecovery-official-twrp-galaxy-s6-edge-t3354492
Do all steps in this thread, then install SuperSU zip package using TWRP.
Here just for reference: http://forum.xda-developers.com/moto-g4-plus/how-to/root-systemless-rooting-supersu-2-74-2-t3405772
Jump to number 5-8 step and please, don't put fire on your phone.
Click to expand...
Click to collapse
So many informations at once for my newbie brain that im confused now
Revuella said:
So many informations at once for my newbie brain that im confused now
Click to expand...
Click to collapse
Just do it, 15min and you have a burned rooted phone.
I.had.rooted my galaxy 6 but after i had done a hard reset to try and delete all my extra trash files and now i.cant.download any apk apps can someone help please