hi guys i want to change my CSC back to btu (uk) ive downloaded the latest uk rom and flashed via odin but its still the same can anyone help please
thanks
If you have flashed a full stock BTU then you should be able to go into recovery and it will reset for you.
You might then have to do a factory reset.
Kangburra said:
If you have flashed a full stock BTU then you should be able to go into recovery and it will reset for you.
You might then have to do a factory reset.
Click to expand...
Click to collapse
thanks it worked i noticed when i flashed it via odin i still had my apps ect installed i thought odin got rid of all that or has things changed
brockyneo said:
thanks it worked i noticed when i flashed it via odin i still had my apps ect installed i thought odin got rid of all that or has things changed
Click to expand...
Click to collapse
ODIN doesn't change data, so settings are kept, even if the CSC changes only a boot into recovery will activate the change.
Kangburra said:
ODIN doesn't change data, so settings are kept, even if the CSC changes only a boot into recovery will activate the change.
Click to expand...
Click to collapse
ah right thats cleared it up for me thanks alot i remember from the note 2 days odin use to wipe everything like new again
Related
Hi,
I just unrooted my phone Galaxy S3 and install original rom for my country.
Everything is fine except kies does not show any firmware information on firmware section..
Why this happens and what can I do for this?
Thanks
I had that as well after reflashing a backup. I reflashed the stock rom through odin without a wipe and it worked fine after that.
orkat said:
Hi,
I just unrooted my phone Galaxy S3 and install original rom for my country.
Everything is fine except kies does not show any firmware information on firmware section..
Why this happens and what can I do for this?
Thanks
Click to expand...
Click to collapse
it is possible that your csc doesn't match to your firmware. you can only make kies updates if phone, pda, csc match together.
if this is not the reason you can try to uninstall, clean your registry and install kies again.
roo1980 said:
I had that as well after reflashing a backup. I reflashed the stock rom through odin without a wipe and it worked fine after that.
Click to expand...
Click to collapse
willis3 said:
it is possible that your csc doesn't match to your firmware. you can only make kies updates if phone, pda, csc match together.
if this is not the reason you can try to uninstall, clean your registry and install kies again.
Click to expand...
Click to collapse
Negative
I have done this by mistake in the past using odin but I can't understand why it didn't work.
I have now a phone from Australia apparently and kies is not very helpful. I already have the BTU ELLA update but I'm not sure if it would work flashing that with odin. In the past it didn't work and I had to reflash the correct update.
Am I supposed to flash more than just the PDA?
vasp3690 said:
I have done this by mistake in the past using odin but I can't understand why it didn't work.
I have now a phone from Australia apparently and kies is not very helpful. I already have the BTU ELLA update but I'm not sure if it would work flashing that with odin. In the past it didn't work and I had to reflash the correct update.
Am I supposed to flash more than just the PDA?
Click to expand...
Click to collapse
No, just place the correct rom in PDA and flash it. The phone however has a specific sales code and if the installed firmware differs from the device`s country code Kies will not support updates. Only if you have the correct regional rom for your S3.
Thanks.
In the past I had used a BTU Tom instead of the vodafone specific on a i9300 and it had lost the notification bar and touzhwiz crashed.
Once I installed the vodafone specific rom it went back to normal.
I have now come across the ELLA update on a Australian import s3 and just flashed it with kies. Trouble I have with that now is that the bottom shortcuts somehow are stuck and wont be replaced. I will try and reflash the rom tomorrow with odin and if it doesn't work I'd like to try the international version of 4.1.2.
Did you wipe your device after flashing the firmware?
Some carriers do only than little modifications to the device and may cause incompatibilites with the standard roms.
How do I do a complete wipe?
vasp3690 said:
How do I do a complete wipe?
Click to expand...
Click to collapse
Go to settings, backup and restore and do a data facory reset.
Ah you mean a factory data reset.
When I do that the australian version adds 2 apps which are easily removed and I cannot see anything else there. I also have another issue.
Odin 3.04 does not see my phone. Only odin 1.85 can.
But even that version says that the md5 file I downloaded from sammobile is invalid.
I am going to try this with mobile odin
Right
Tried the btu version with mobile odin and again have the same issue. Notification panel is gone and the touchwiz doesn't work properly.
vasp3690 said:
Right
Tried the btu version with mobile odin and again have the same issue. Notification panel is gone and the touchwiz doesn't work properly.
Click to expand...
Click to collapse
You have to reset after you flashed the rom. Did you reset the flash counter with Triangle Away?
Update
Retried the btu md5 but selected to wipe data and cache from mobile odin pro.
It seems to be working now
Hey my name is rj and I have a uscc galaxy s4 but! I flashed the Verizon to uscc converter because I was useing the verizon hyperdrive rom and now! I went back to stock and unrooted my phone and everything now its saying its a verizon galaxy s4 like I flashed it are something witch I didnt! I just want my phone back to normal please help! Thanks! Ohh yea my phone wont get internet call text are data now that I jave done this!.......I Know its some very smart people on this soo please help me! Thanks in advanced
I bet it would be a lot easier to help if you typed proper english
brandonair95 said:
I bet it would be a lot easier to help if you typed proper english
Click to expand...
Click to collapse
Im sorry.
did you try to odin back to stock?
By go back to stock do you mean you just hit factory reset? Because that is not going back to stock.
Yes. I odin flashed back to stock I flashed the stock tar.md5 file for my phone I haven't tried factory resetting.
TRoPiCaL_No.OB said:
Yes. I odin flashed back to stock I flashed the stock tar.md5 file for my phone I haven't tried factory resetting.
Click to expand...
Click to collapse
You should always factory reset in the stock recovery after you Odin the stock firmware.
jd1639 said:
You should always factory reset in the stock recovery after.
ohh im sorry I actually did factory reset from the recovery menu.
Click to expand...
Click to collapse
Wich converter from where?
Trying to go back to stock rom downloaded from Sammobile, but Odin gets stuck and says check partition. also would OEM unlock needs to be on in Developer mode? as this does not seem to turn on, get message saying phone will be erased...Would most appreciate procedure to return to stock.
leicablue said:
Trying to go back to stock rom downloaded from Sammobile, but Odin gets stuck and says check partition. also would OEM unlock needs to be on in Developer mode? as this does not seem to turn on, get message saying phone will be erased...Would most appreciate procedure to return to stock.
Click to expand...
Click to collapse
Have you tried the patched version of ODIN? To go back to stock, you really should fully wipe the device or you risk running into a lot of issues with carrier settings, features, APN's, etc., not working.
Just to chime in about wiping. When I reverted back, and didn't manually wipe in recovery, I had no navigation bar. Even though Odin will wipe depending on which CSC you use, I'd still suggest a wipe.
jcsww said:
Have you tried the patched version of ODIN? To go back to stock, you really should fully wipe the device or you risk running into a lot of issues with carrier settings, features, APN's, etc., not working.
Click to expand...
Click to collapse
Thank you, modded Odin worked.
leicablue said:
Thank you, modded Odin worked.
Click to expand...
Click to collapse
Glad to hear it!
leicablue said:
Trying to go back to stock rom downloaded from Sammobile, but Odin gets stuck and says check partition. also would OEM unlock needs to be on in Developer mode? as this does not seem to turn on, get message saying phone will be erased...Would most appreciate procedure to return to stock.
Click to expand...
Click to collapse
I have had this issue yesterday, with 3-4 different ODIN versions. I got it to work using the ODIN version 3.13 from sammobile.
Samsung Galaxy S9 (SM-G960F)
Will it also work for Samsung Galaxy S9 (SM-G960F)??? or any other solution.
ODIN 3.13.1
umer.h301 said:
Will it also work for Samsung Galaxy S9 (SM-G960F)??? or any other solution.
Click to expand...
Click to collapse
Yes it does...follow the steps and it will work
Hi!,
I have an S9+ duos version and still have to received the androp p update. Actually I've never received any update since i bought the phone last Year June.
I would like to know what should I check for if im downloading the os and installing it through odin.
Will installing theough odin trip knox?
Can the knox counter be untripped?
Please help guys. New to the whole thing (obviously ?)
flashing stock ROM using odin will not trip knox
make sure to flash the ROM for the same model
Stock Firmware Help
I've downloaded an android 9 firmware before it came to my phone model (SM-G965F/DS) and flashed it. When I check under Software Update in settings it says "Your current software version isn't supported visit a service center".
Is there a way to go back to the factory firmware it came with through smart switch or.... how do i find the correct firmware to flash with odin? Because i dont have any version details from before...
Please help!
breakneck001 said:
I've downloaded an android 9 firmware before it came to my phone model (SM-G965F/DS) and flashed it. When I check under Software Update in settings it says "Your current software version isn't supported visit a service center".
Is there a way to go back to the factory firmware it came with through smart switch or.... how do i find the correct firmware to flash with odin? Because i dont have any version details from before...
Please help!
Click to expand...
Click to collapse
I believe as long as you do a full clean flash, the software update will function normally. By full clean flash I mean flashing the CSC and not HOME_CSC, and flashing userdata if that was included in your firmware, although I'm not sure if that part affects this or not. But the CSC, which will wipe your data by the way, should set everything straight I believe. It has worked for me.
YrrchSebor said:
I believe as long as you do a full clean flash, the software update will function normally. By full clean flash I mean flashing the CSC and not HOME_CSC, and flashing userdata if that was included in your firmware, although I'm not sure if that part affects this or not. But the CSC, which will wipe your data by the way, should set everything straight I believe. It has worked for me.
Click to expand...
Click to collapse
Sorry im not familiar on how to do it. Can you pks please let me know how that is done?
breakneck001 said:
Sorry im not familiar on how to do it. Can you pks please let me know how that is done?
Click to expand...
Click to collapse
Oh, you said you flashed the firmware package, so did it have four or five different files inside the package, like AP, BL, CSC etc? You put each file in the respective slot in Odin, and instead of using HOME_CSC, use CSC, which will wipe your data but it will line up the customer code with the firmware so that updates should work as normal.
YrrchSebor said:
Oh, you said you flashed the firmware package, so did it have four or five different files inside the package, like AP, BL, CSC etc? You put each file in the respective slot in Odin, and instead of using HOME_CSC, use CSC, which will wipe your data but it will line up the customer code with the firmware so that updates should work as normal.
Click to expand...
Click to collapse
Oh ok. Thank you so much! Will try it out and update. :good:
YrrchSebor said:
Oh, you said you flashed the firmware package, so did it have four or five different files inside the package, like AP, BL, CSC etc? You put each file in the respective slot in Odin, and instead of using HOME_CSC, use CSC, which will wipe your data but it will line up the customer code with the firmware so that updates should work as normal.
Click to expand...
Click to collapse
@YrrchSebor it worked! Thanks again :good::good::good:
breakneck001 said:
@YrrchSebor it worked! Thanks again :good::good::good:
Click to expand...
Click to collapse
You're welcome, thanks for the good news ?