Related
Hey,
Tried as hard as I could not to have to ask, looked everywhere I could think of, searched through dozens of threads and found nothing in regards to my Trio Stealth G2 tablet.
My question is, what method of rooting should I use for my tablet, and once I do root would there be a custom ROM I could use?
I've seen people mention they messed up flashing a custom ROM to the Stealth Pro 7, but I'm not sure if any ROM made for a 7" Cortex A9 tablet would work. Don't want to brick this though so thought I wouldn't chance it.
Thanks
I got the other day an I am to wanting to root it I think bin4ry root method would work but adb won't work cause there's no fastboot on the thing it dose have a recovery but its 3e
Sent from my G2 using xda premium
I think I got some progress today while its pluged into ur computer press pwr+vol- to get off of battery charging screen then hold them till u here ur computer make the sound like something got pluged in an ur tablet will be under m3-chipset in device manager search the internet for aml flash tool I have got it to connect to my pc
Sent from my G2 using xda premium
Not gonna use aml flash tools cause I can't find any good info on it found a safe mode on the thing today an got root with bin4ry to finally pick up the device its using adb still no root cant get a backup made with it an adb in cmd won't pick it up I know the tab has it tho I found the adb file on it after looking forever View attachment 2107849
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my G2 using xda premium
here is a method that might work for you
go to my thread: forum.xda-developers.com/showthread.php?p=44294370#post44294370
I would post it here but i would just take up alot of posting space writing it down..the way i did it worked for me and believe me i was going for hours trying to find someway to root my trio stealth g2 until i found out how lmao let me know how it goes
U really got root on it
Sent from my G2 using xda premium
Yeah I did i have it rooted now with the play store mod
Sent from my G2 using xda app-developers app
Trio Stealth G2
Just got this tablet today. I was able to root it using the One Click Root and it has rooted it properly so it would seem so far.
slick97477 said:
Just got this tablet today. I was able to root it using the One Click Root and it has rooted it properly so it would seem so far.
Click to expand...
Click to collapse
Hi, slick97477. Where did you get the One Click Root tool? I didn't see any forums for this (or any other Trio) device on here.
Thank you in advance.
http://forum.xda-developers.com/showthread.php?t=1734365
One click
I got it from here
just google oneclickroot
and just run it. Couldn't believe it worked but it did.
However today went to try and turn it on and nothing, Just hung and the Trio logo. Let it sit for about 10 minutes. Decided maybe battery was dead and plugged it in still nothing. No battery logo nothing. Hit reset button and plugged it in again and nothing. Screen doesnt come on now nothing but however weird thing is it shows up as winusb now under devices which is amlogic driver for flashing firmware which im not sure how this has happened but it has. I have took it apart and took pics of the mainboard and cpu. Would like to see if perhaps there is firmware out for this...Have done quite a bit of research and numerous different things so far..
I have downloaded the firmware installer from amlogic but so far no firmware seems to like my cpu....Hmmm well cannot upload pictures yet for some reason..If anybody is interested in trying to help me figure out which firmware will work on it I would greatly appreciate it. I used it the night before and it worked great. Have not installed anything new or anything so I am a bit baffled in how the firmware got torched but I am pretty sure that is what has happened any ideas I am willing to try. I have recently dived into really messing with the android devices but had not done anything with this tablet yet because I had not found a way to back up the current firmware on it...so was really being nice to it for now....
(Edit) Pics are included just didn't try hard enough
try this
Yea id like to help try turning it on while its pluged in ur computer then hold the power button till u here the sound like something got pluged in ur computer then then hit the power button to turn it on if this dosnt work try turning it on then after the @9 boot logo hold both volume keys that should put it in safe mode only the apps that came on the tab will work
Trio Stealth g2 tablet issues
Hi I was reading your posts about the g2 and I seem to be having a similar issue. The tablet is frozen on the trio stealth g2 loading screen and I have pushed all the buttons including the reset button on back to no success. I got the tablet to recognize as m3 chip on my pc and was able to aml flash tool but every time I try to upload a rom like stock jellybean or some custom rom its asking for a upgrade config file which of course I do not have there has to be a way to just completley wipe this tablet and install a new os any ideas on how I can get this thing to flash, I was hoping I could load a sd card and push some buttons on the tablet to flash from the sd card but I have no clue if thats possible
Stealth G2 9.7"
damncheaptablets said:
Hi I was reading your posts about the g2 and I seem to be having a similar issue. The tablet is frozen on the trio stealth g2 loading screen and I have pushed all the buttons including the reset button on back to no success. I got the tablet to recognize as m3 chip on my pc and was able to aml flash tool but every time I try to upload a rom like stock jellybean or some custom rom its asking for a upgrade config file which of course I do not have there has to be a way to just completley wipe this tablet and install a new os any ideas on how I can get this thing to flash, I was hoping I could load a sd card and push some buttons on the tablet to flash from the sd card but I have no clue if thats possible
Click to expand...
Click to collapse
I too have a g2 with the same issue but i've gotten it into ADB Recovery. When using the AML Flash tool, after you import the upgrade file and it asks you to manually input a config file use the config_progress.xml file that is in the AML flash installation directory possibly under \resource\
This is what got me to ADB recovery but anytime I try to reboot the tablet it reverts back to Worldcup Device in device manager so I'm stuck. Hope this helps.
Issue
spurloc said:
I too have a g2 with the same issue but i've gotten it into ADB Recovery. When using the AML Flash tool, after you import the upgrade file and it asks you to manually input a config file use the config_progress.xml file that is in the AML flash installation directory possibly under \resource\
This is what got me to ADB recovery but anytime I try to reboot the tablet it reverts back to Worldcup Device in device manager so I'm stuck. Hope this helps.
Click to expand...
Click to collapse
Hey I was able to flash the tabley with aml but I used novo 7 fire and now nothing comes up, no boot screen or anything, however when its plugged into my pc I can access the internal storage and Micro sd card storage, but I need to remove the rom and get one that works correctly for the tablet, unlike before It wont let me push the power and vol button to make it go to the m3 chip which then I could use the aml world cup driver so some how I have to flash it from the internal storage or by some means but I have no clue at this point. The driver is Portable media player MID Novo7 I changed the driver to android ADB which it installs but then I cant access the internal storage, is there anyway to re flash this? I tried pushing diffrent buttons on the tablet to see if a diffrent chip is recongized like the m3 was from before but nothing
damncheaptablets said:
I tried pushing diffrent buttons on the tablet to see if a diffrent chip is recongized like the m3 was from before but nothing
Click to expand...
Click to collapse
From my experience with the stealth g2 9.7" if you open up the tablet and use a pin or small screwdriver to short (connect) nand pins 7 & 8 (counting down from top right of chip, yours maybe 5 & 6 or 6 & 7 ) as seen in picture below the circled area, while powering the unit on, should erase the nand and revert to Worldcup device in device manager which will allow the AML flash tool to see the device again.
Image -- freaktab(.)com/attachment.php?attachmentid=3068&d=1377544440
Umm ur awesome
spurloc said:
From my experience with the stealth g2 9.7" if you open up the tablet and use a pin or small screwdriver to short (connect) nand pins 7 & 8 (counting down from top right of chip, yours maybe 5 & 6 or 6 & 7 ) as seen in picture below the circled area, while powering the unit on, should erase the nand and revert to Worldcup device in device manager which will allow the AML flash tool to see the device again.
Image -- freaktab(.)com/attachment.php?attachmentid=3068&d=1377544440
Click to expand...
Click to collapse
Thanks alot, I opened my tablet, found the tf boot and it worked, now if I can just get the right firmware installed
damncheaptablets said:
Thanks alot, I opened my tablet, found the tf boot and it worked, now if I can just get the right firmware installed
Click to expand...
Click to collapse
Nice! Glad it worked. At this point we're in the same boat. I'm not sure how to properly flash a new firmware even though i've got an identical working one. It seem's I've tried everything and the closest i've gotten is just getting the screen to light up blank, which hasn't happened in a long while now. I used the instructions in the PDF file below except i replaced the bootloader.img, boot.img & recovery.img files from a backup I made, ran heroflash.bat and rebooted the device and now the screen comes on blank. Not sure where to go from here though. I'll keep trying
Instructions - PDF Link
svet-tabletu(.)cz/podpora/Ainol_Novo_10_Hero/ENG_NOVO10HERO_Unbrick_Instruction_0_4_RC.pdf
package link
mediafire(.)com/download/nq0ppsle1t662ht/AML_USB_Unbrick_AINOL_HERO_10.rar
Yeah im stuck now
spurloc said:
Nice! Glad it worked. At this point we're in the same boat. I'm not sure how to properly flash a new firmware even though i've got an identical working one. It seem's I've tried everything and the closest i've gotten is just getting the screen to light up blank, which hasn't happened in a long while now. I used the instructions in the PDF file below except i replaced the bootloader.img, boot.img & recovery.img files from a backup I made, ran heroflash.bat and rebooted the device and now the screen comes on blank. Not sure where to go from here though. I'll keep trying
Instructions - PDF Link
svet-tabletu(.)cz/podpora/Ainol_Novo_10_Hero/ENG_NOVO10HERO_Unbrick_Instruction_0_4_RC.pdf
package link
mediafire(.)com/download/nq0ppsle1t662ht/AML_USB_Unbrick_AINOL_HERO_10.rar
Click to expand...
Click to collapse
Yeah I tried to flash 40D_resque.zip with aml and I would either get W/ Import upgrade file C:\Users\Jy\Desktop\_USB-Burning-Tool\resources
\40D_resque.zip
W/ [P2][19:41:11]Loading spl ...
W/ [P2][19:41:12]Transfer Complete! total size is 18556 Bytes
E/ [P2][19:41:13]Spl code,identy(-1)
E/ [P2][19:41:13]Load uboot failed 1 times
E/ [P2][19:41:14]Spl code,identy(-1)
E/ [P2][19:41:14]Load uboot failed 2 times
E/ [P2][19:41:15]Spl code,identy(-1)
E/ [P2][19:41:15]Load uboot failed 3 times
E/ [P2][19:41:16]Spl code,identy(-1)
E/ [P2][19:41:16]Load uboot failed 4 times
E/ [P2][19:41:16]Load uboot failed 3 times, retry from 0 step
W/ [P2][19:41:17]Loading spl ...
W/ [P2][19:41:17]before loadSpl, identify return -1
and have to use a screwdriver to reboot it in m6 chip, before I was able to get about 80% with flash but then got a boot error about unable to find device and at that time the tablet would change device name from the worldcup driver to portable media device with a drive letter like H:/ but I couldnt access it, man this is making me
damncheaptablets said:
Yeah I tried to flash 40D_resque.zip with aml and I would either get W/ Import upgrade file C:\Users\Jy\Desktop\_USB-Burning-Tool\resources
E/ [P2][19:41:16]Spl code,identy(-1)
E/ [P2][19:41:16]Load uboot failed 4 times
E/ [P2][19:41:16]Load uboot failed 3 times, retry from 0 step
W/ [P2][19:41:17]Loading spl ...
W/ [P2][19:41:17]before loadSpl, identify return -1
and have to use a screwdriver to reboot it in m6 chip, before I was able to get about 80% with flash but then got a boot error about unable to find device and at that time the tablet would change device name from the worldcup driver to portable media device with a drive letter like H:/ but I couldnt access it, man this is making me
Click to expand...
Click to collapse
It looks like there's an issue with that specific u-boot.bin (u-boot-orig.bin) within that package. Although the fact that it shows up in device manager as Portable device means that part of it was written by the flash utility. Have you tried force-ably replacing the drivers from portable device to android adb drivers. This might allow you to access the adb recovery mode.
Alternatively if ADB doesnt show any devices after replacing the drivers, you might want to uninstall the adb drivers that didnt work, once it appears as portable device again, the tablet might be looking for its new firmware on the sdcard. Check out the page in the link and follow the instructions for "Method One - SD Card Method for a "soft" brick". It involves restoring a factory image onto the sdcard using a handy tool "USB Image tool" and then rebooting. It might kick in an update from the sd.
link --
slatedroid(.)com/topic/41478-how-to-unbrick-your-amlogic-aml8726-mx-series-tablet-v20/
Also I could upload the aml flash files that are getting me into adb recovery mode every time
Hello people,
I just tried to install CyanogenMod 11 on my RAZR MAXX. I had an error with installed Google App, so I struggled to fix ... while was tryin to fix gapps error I have accidentally installed new CM11 over my Stock ROM :crying:
After I rebooted phone I have realized... now I cant run any ROM, I cant run even recovery. My phone just display dead android icon and keep on restarting phone every 2 min. Dead android is not responding to any try to open recovery...
I tried to flash fastboot from my PC, but RSDLite do not recognize my phone!!!
I am not sure do I have right drivers since I have reinstalled system on my PC recently, so I have downloaded and installed:
motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481/action/auth
But stil RSDLite cant recognize my phone... idk what to do, probably its because my phone keep on restarting...
PLEASE HELP ME! I dont know what to do
UPDATE:
I think that main problem is USB driver, since my PC cant recognize device. It always show me message:
The last USB device conected to this computer is malfunctioned windows can not recognize it.
Recommendation:
Try reconnecting device. If Windows stil does not recognize it, your device may not work properly.
I tried to download new Motorola drivers million times. I have also downloaded motohelper drivers and result is still the same. I tried to change PC and still the same. Always the same message!
How could I fix this? If my PC could just detect device I would be able to use RSDLite and fastboot android again...
UPDATE 2:
When I have dead android picture and keep on pressing buttons (there is no rule, not power and volume +/- , just by random pressing) I could enter to this recovery menu:
-reboot system now
-apply update from external storage
-apply update from ADB
-wipe data/factory reset
-wipe cache partition
I tried all options but always the same. Only applying update left, but I cant connect device with my computer
UPDATE 3:
I tried apply update from external storage where I have put CM11 zip file and I got this:
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
Installation aborted
----------------------------------------------------------------------------------------------------------------------------------------
[1] RSD Lite Fastboot - doesnt work -> PC doesnt recognize device
[2] ADB -> doesnt work -> PC doesnt recognize device
[3] sd card -> installation aborted!!!
[4] ...
Is there any other way in which I could fix my phone? Someone please help me.
New post... for some new info, since previous got messy
Since I can only access Fast boot menu I tried to update from external storage the same version which I had previously installed.
I wasnt sure will it works since I have installed this version: Blur_Version.672.180.41.XT910.Retail.en.EU.zip
by following instructions on this link: http://forum.xda-developers.com/show...48&postcount=1
And finally Installation wasnt aborted after verifying update package... Installation started and I got this error:
Code:
assert failed: file_getprop("/system/build.prop", "ro.build.fingerprint") =="RTGB/XT910_RTGB/umts_spyder:4.0.4/6.7.2-180_SPU-19-TA-11.6/1342417437/:user/release-keys" || file_getprop(("/system/build.prop", "ro.build.fingerprint") == "motorola/XT910_rtvfde/umts_spyder:4.1.2/9.8.20-124_SPUEM-14/1362039991:user/release-keys"
restoring configuration START..
restoring configuration END..
Installation aborted.
Im not sure is that connected with Voodoo OTA Rootkeeper, SU or other steps which are listed in instructions... since now I cant do anything since start update from external storage? Anyone help please?!?
So after you got blur to install did you go back into Fastboot with power+ volume down and wipe then try a reboot?
Sent from my KFTT using Tapatalk
control187 said:
So after you got blur to install did you go back into Fastboot with power+ volume down and wipe then try a reboot?
Sent from my KFTT using Tapatalk
Click to expand...
Click to collapse
But blur installation is aborted, not finished?
I tried to wipe and reboot and repeat installation but always the same.
But now I did one good thing... first I uninstalled all drivers and Motocast and manager. And in fastboot menu I connected USB charger and my PC recognize and have successfully installed FASTBOOT SPIDER DRIVER!!!! So now RSD Lite can recognize my device.... it see that something is connected. But it cant read any info from it:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In Fastboot Flash mode its says:
Code:
0A.77
eMMC Info> Size 16G
To return to normal mode / first press power key to power down
Device is LOCKED. Status Code: 0
Battery Low
Cannot Program
Connect USB
Data Cable
Anyway am I able to fastboot new stock, if I have installed this blur version on my phone?
And how to fix this bug with RSD Lite?
EDIT:
My battery is getting low and I cant recharge it
I read some posts about making "factory recharging cable" but I dont have tools for that, and it sounds too dangerous to me
Is there any way I could just fix installation abort from previous post?
When I did it, I had to fastboot back to JB. I don't remeber the link where I got the file, But you go into rsdlite and uncompress the stock zip file, RSD does the rest.
Sent from my XT912 using Tapatalk
---------- Post added at 09:50 AM ---------- Previous post was at 09:50 AM ----------
If you already have a low battery you may have to get the special cable that charges a soft bricked phone.
Sent from my XT912 using Tapatalk
control187 said:
When I did it, I had to fastboot back to JB. I don't remeber the link where I got the file, But you go into rsdlite and uncompress the stock zip file, RSD does the rest.
Sent from my XT912 using Tapatalk
---------- Post added at 09:50 AM ---------- Previous post was at 09:50 AM ----------
If you already have a low battery you may have to get the special cable that charges a soft bricked phone.
Sent from my XT912 using Tapatalk
Click to expand...
Click to collapse
But RSD Lite cant recognize my phone. It recognize file which I uploaded, but for Device properties its N/A everywhere.
Can you post a screenshot from RSD?
Sent from my XT912 using Tapatalk
control187 said:
Can you post a screenshot from RSD?
Sent from my XT912 using Tapatalk
Click to expand...
Click to collapse
I did, 2 posts above
Sorry, didn't load earlier. What is the rest of that fail message? Is it about the battery? If the battery is low and that's why RSD won't recognize you will need to get one of those cables.
Sent from my XT912 using Tapatalk
JoLoLo said:
But RSD Lite cant recognize my phone. It recognize file which I uploaded, but for Device properties its N/A everywhere.
Click to expand...
Click to collapse
It's recognized,it doesn't matter what is written there,after the flash everything should be ok.
And from your screenshot it looks to me that you are trying to flash the wrong version rom.What was your stock,ICS or JB?
Since you don´t have the factory cable,maybe THIS is a solution
And HERE is a video tutorial how to make the factory cable.
Sent from my Razr XT910
welder73 said:
It's recognized,it doesn't matter what is written there,after the flash everything should be ok.
Sent from my Razr XT910
Click to expand...
Click to collapse
So if not needed to show Device properties to work properly then ok... I got error in first step: Phone returned FAIL.
Is this posible because my battery is low, and in Fast boot its written:
Battery Low
Cannot Program
?
JoLoLo said:
So if not needed to show Device properties to work properly then ok... I got error in first step: Phone returned FAIL.
Is this posible because my battery is low, and in Fast boot its written:
Battery Low
Cannot Program
?
Click to expand...
Click to collapse
It´s possible...
Did you try what I suggested? I edited my post,maybe you didn´t saw.
welder73 said:
It´s possible...
Did you try what I suggested? I edited my post,maybe you didn´t saw.
Click to expand...
Click to collapse
Oh I didnt saw the edited part.
I was using JB. But I used some version which doesnt allow me to go down to ISC (this thread: http://forum.xda-developers.com/showthread.php?t=2192532 ).
So I guess that I need to pick JB firmware?
This file: Android 4.1.2 - Blur_Version.982.124.14.XT910.Retail.en.EU
right?
Or I screw up everything by installing the version from link above?
P.S.
I need to get tools for making that factory cable. I will try to collect all that tomorrow.
Originally Posted by welder73
It´s possible...
Did you try what I suggested? I edited my post,maybe you didn´t saw.
Click to expand...
Click to collapse
Oh I didnt saw the edited part.
I was using JB. But I used some version which doesnt allow me to go down to ISC (this thread: http://forum.xda-developers.com/showthread.php?t=2192532 ).
So I guess that I need to pick JB firmware?
This file: Android 4.1.2 - Blur_Version.982.124.14.XT910.Retail.en.EU
right?
Or I screw up everything by installing the version from link above?
P.S.
I need to get tools for making that factory cable. I will try to collect all that tomorrow.
Click to expand...
Click to collapse
Oh,it's NOT POSSIBLE to go back to ICS,that's a well known fact.
And yes,that's a good version if you are from Europe.
Sent from my Razr XT910
Back to basics. I can only advise based on what I use. First of all, BMM for recovery. It works. I know nothing about SafeStrap.
Second I've run Linux exclusively and know little about Windows. I would install Linux on some machine and begin repairs with fastboot.
Also, it's been a long time since I've had problems with my Razr, so I've pretty much forgotten all the repair details.
I just made it!!!!! Factory cable saved me!!!! Woooooohoooooo...
Tnx everyone for helping me. After I created factory cable and pluged it into phone everything gone pretty easy... RSD Lite finaly completed fastbooting, battery status was ok and here we go:
I love happy endings.
I've already tried many apps, such as kingoroot, kingroot, one click root, framaroot, etc. i really need help. Thx in advance
kebakkaran said:
I've already tried many apps, such as kingoroot, kingroot, one click root, framaroot, etc. i really need help. Thx in advance
Click to expand...
Click to collapse
I have same problem
Sent from my SM-J320FN using Tapatalk
imrandewana said:
I have same problem
Sent from my SM-J320FN using Tapatalk
Click to expand...
Click to collapse
Same issue here as well, nothing I try works on this phone, it's driving me insane.
EDIT: It's android 6, so you can't root the phone without a custom recovery.
WELP. So I just spent the past 2 days wasting my time on this god awful phone. I can't even access fastboot on this piece of crap, it comes up for 2 seconds and then disappears and no amount of "properly" installing usb drivers for it has helped. I even tried disabling driver signing and installing the drivers through adding legacy hardware. Nothing worked at all. So I thought I'd just install a custom recovery with sp flash tool. So I downloaded a stock rom for the vfd300 (my phone) from here: https://androidmtk.com/download-vodafone-stock-rom-models and ported TWRP using an ASUS Zenfone GO's TWRP.img.
Custom Recovery works fine, the phone does not. It is now stuck in a bootloop. Tried formatting everything (from TWRP) doesn't work. Tried flashing the rom again (even with the stock recovery) still stuck at bootloop, tried about 3 other vfd300 stock roms that people have uploaded to http://forum.gsmhosting.com and none of them have worked either. Currently downloading yet ANOTHER one and tbh I don't have high hopes. (EDIT: It didn't work)
Any help at this point would be appreciated.
Holy crispy crap it started............................. So I managed to find a working rom from (what appeared to be) some Vietnamese file hosting website .
You follow the instructions below at your own risk. No one is responsible for any damage done to your device but you.
I officially have root working on this device.
Now that I've done it, it's a surprisingly simple procedure. As I stated in the edit in my reply above, the VFD300 has Android 6 on it, which requires (afaik) a systemless root to be installed from recovery.
I ported the custom recovery from this thread (since the Z00VD has the same chip as the VFD) which you can download here.
Download the latest version of Chainfires beta SuperSU installer from this thread and transfer it to either your phones internal storage or SD card.
Also download a copy of SP Flash tool (if your fastboot works, use that instead). Finally, you will need this scatter file.
Unplug your phone from the computer and shut it down. Open SP Flash tool and click the download tab at the top.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click "choose" next to the Scatter-loading file box and select the path to the scatter file you downloaded. IMPORTANT Make sure all boxes below except recovery are unchecked and select Download Only in the drop-down box. Double click on recovery in the Location column and point it to the custom recovery image you downloaded.
Click the Download button at the top and then plug your phone back in. The bottom bar will turn red, then purple, then yellow and once it is fully done flashing you will get a pop-up box with a green tick as confirmation.
Unplug your phone and reboot into recovery (Power+Vol-Up). In the custom recovery, select install, go to the directory you transferred Chainfires beta SuperSU.zip to, install it and reboot. TWRP will ask you if you want it to install root, DO NOT LET IT INSTALL ROOT. Your phone may loop a few times and can take up to 10 minutes to boot the first time, but it will be successfully rooted.
If you need a copy of the stock rom, download this one. If you want to flash this rom, make sure you use the scatter file in the roms archive and select firmware upgrade from the Download Only box on SP Flash Tool.
EDIT: I'm so sorry I borked the hyperlink order. Instead of linking to the scatter file I linked to the entire rom and vice versa with the stock rom link
Vikeyev
vikeyev please contact me at [email protected]
Hey ummm, this is a great tut. I have problem with mine though unfortunately :/. I've done all steps correctly, with each of them followed thoroughly but then I get to the point where my device isn't identified when I connect it to the computer. None of those colored 'bottom bars' pop up nor the green tick as confirmation concept. PLEASE HELP ME !
[UPDATE] When I disconnect my device, some BROM error comes up but idek what it means.
InevitableDefeat276 said:
Hey ummm, this is a great tut. I have problem with mine though unfortunately :/. I've done all steps correctly, with each of them followed thoroughly but then I get to the point where my device isn't identified when I connect it to the computer. None of those colored 'bottom bars' pop up nor the green tick as confirmation concept. PLEASE HELP ME !
[UPDATE] When I disconnect my device, some BROM error comes up but idek what it means.
Click to expand...
Click to collapse
Did you make sure to power off your phone and unplug the USB, then press download and reconnect your phones usb? Don't turn the phone back on, just replug it in after you hit the download button.
kathy9911 said:
vikeyev please contact me at [email protected]
Click to expand...
Click to collapse
....why?
stuck on loading
hi i'm a bit stumped here i followed all the steps to root my vfd 300 i got custom recovery installed but now when i reboot it the phone just sits on the loading part about 30 minutes i been waiting is there any thing i have missed or can do to solve this
thanks in advance
putzwon said:
hi i'm a bit stumped here i followed all the steps to root my vfd 300 i got custom recovery installed but now when i reboot it the phone just sits on the loading part about 30 minutes i been waiting is there any thing i have missed or can do to solve this
thanks in advance
Click to expand...
Click to collapse
Sounds like a boot loop. You need to download the stock rom (it should be about 700mb or so and in rar format). Once you've downloaded the stock rom, extract the archive to a folder somewhere (you will need something like 7zip or Winrar). Open SP Flash tool, load the scatter file from the extracted folder and make sure you select every box. There should be a check mark in each box. Change SP Flash tools dropdown box to firmware upgrade (by default it is on Download Only) and then flash it similar to how you did with the recovery (make sure you change the recovery to the custom one from above).
If my instructions aren't clear enough, I can do it again to my phone and take pictures of the entire process to make it easier to follow.
vikeyev said:
Did you make sure to power off your phone and unplug the USB, then press download and reconnect your phones usb? Don't turn the phone back on, just replug it in after you hit the download button.
....why?
Click to expand...
Click to collapse
Yeah man! I've done that as well but had no luck .
1. I've enabled USB Debugging Mode and I've shut my phone down (NOTE: It has not been connected to the computer)
2. I opened the SP Flash tool and I clicked the download tab at the top
3. I then choose next to the scatter-file thing and have relocated it to the scatter file that I've downloaded from your link
4. ALL boxes are unchecked except recovery with download-only in the drop-down box
5. I've done the recovery image and everything and then...
6. I plug my phone in (Yes, it's completely shut down from step 1) with the USB cable and nothing shows up (Colored bars, tick etc.)
7. When I unplug it, an error comes up and then I'm completely stuck with no idea of what to do next
[UPDATE] - Does my phone have to be on the latest version?
Same problem
I'm having the same issue. I follow the instructions, phone off, press download, etc. I dont get any bars changing colours.
Did you manage to sort it out yet?
[update] managed to work it out. the MT65xx drivers werent installed properly. Use the instructions here (I cant post links!!! google: sp-flash-tool-mediatek-mt65xx-drivers-download-and-installation-guide-including-bricked-devices) to get them working first, make sure the battery is out of your phone and the main instructions in this thread work first time.
huggies15 said:
I'm having the same issue. I follow the instructions, phone off, press download, etc. I dont get any bars changing colours.
Did you manage to sort it out yet?
[update] managed to work it out. the MT65xx drivers werent installed properly. Use the instructions here (I cant post links!!! google: sp-flash-tool-mediatek-mt65xx-drivers-download-and-installation-guide-including-bricked-devices) to get them working first, make sure the battery is out of your phone and the main instructions in this thread work first time.
Click to expand...
Click to collapse
My brother, you're a genius . Thanks for helping out! It was worked. God bless!
stuck with a white circle runs
hi bro, i met the same issue.
I've done all the step successfully, and after i reboot my phone, it shows up with the logo of Vodafone, then a big circle became a smaller one, and then, the small circle runs endlessly.
I can go in recovery, but cannot boot the system.
I also did a memory test, got tow error
ERROR: NAND Flash was not detected!
ERROR: UFS was not detected!
I tried many times, and format whole flash and download all of them again.
it just doesn't work.
please help, thank you in advance.
frepeak said:
hi bro, i met the same issue.
I've done all the step successfully, and after i reboot my phone, it shows up with the logo of Vodafone, then a big circle became a smaller one, and then, the small circle runs endlessly.
I can go in recovery, but cannot boot the system.
I also did a memory test, got tow error
ERROR: NAND Flash was not detected!
ERROR: UFS was not detected!
I tried many times, and format whole flash and download all of them again.
it just doesn't work.
please help, thank you in advance.
Click to expand...
Click to collapse
Bro I got the EXACT same issue now because I accidentally installed Supersu through TWRP (which is pretty stupid because it was mentioned to AVOID the Supersu prompt when exiting TWRP). I've been stuck on bootloop for a couple of days now .
---------- Post added at 11:39 PM ---------- Previous post was at 11:14 PM ----------
vikeyev said:
Did you make sure to power off your phone and unplug the USB, then press download and reconnect your phones usb? Don't turn the phone back on, just replug it in after you hit the download button.
....why?
Click to expand...
Click to collapse
Bro, I accidentally installed Supersu when the prompt came up as I tried to exit TWRP. I know you said to NOT let it install, which was pretty stupid that I didn't read carefully what you wrote. Now I'm stuck in bootloop -_-.
Please help bro; I've tried flashing it to the stock rom, removing dalvik cache and everything etc. Nothing's working. Please help!
successfully got a rooted vfd 300
InevitableDefeat276 said:
Bro I got the EXACT same issue now because I accidentally installed Supersu through TWRP (which is pretty stupid because it was mentioned to AVOID the Supersu prompt when exiting TWRP). I've been stuck on bootloop for a couple of days now .
---------- Post added at 11:39 PM ---------- Previous post was at 11:14 PM ----------
Bro, I accidentally installed Supersu when the prompt came up as I tried to exit TWRP. I know you said to NOT let it install, which was pretty stupid that I didn't read carefully what you wrote. Now I'm stuck in bootloop -_-.
Please help bro; I've tried flashing it to the stock rom, removing dalvik cache and everything etc. Nothing's working. Please help!
Click to expand...
Click to collapse
I was stuck in bootloop, but we don't share the same reason. I think there is something wrong with the rom above.
I found another rom, flash it, and problem solved, pretty simple. Now, I have a rooted vfd 300, even better than the stock rom, but you need to delete some app you don't like before you enjoy it.
you can find this rom by searching MT6580_S00_EMMC_MRA58K__6.0_VFD-300_Vodafone.zip
frepeak said:
I was stuck in bootloop, but we don't share the same reason. I think there is something wrong with the rom above.
I found another rom, flash it, and problem solved, pretty simple. Now, I have a rooted vfd 300, even better than the stock rom, but you need to delete some app you don't like before you enjoy it.
you can find this rom by searching MT6580_S00_EMMC_MRA58K__6.0_VFD-300_Vodafone.zip
Click to expand...
Click to collapse
can you provide link please google z not giving results for me
Vodafon VFD300 Firmware + TWRP + ROOT
As recommended above, Vodafon vfd 300 as a result of the phone turned on until the endless download -TWRP was not requested, sr1-SuperSU-v2.82 - sr120170608224931 and flash driver SP Flash Tool 3.1352.01 (5.1352.01) did not fit. I decided to solve the problem - the vfd 300 flashed through the firmware MT6580_S00_EMMC_MRA58K__6.0_VFD 300_Vodafone_356774071726533_08_19_2016_09_02_53 (1) (2), the flash driver SP_Flash_Tool_v5.1648_vin - the next way (remove the battery, hold the volume (-) until the end of the firmware, Download, connect the cable to the phone (the firmware will go to Emergency port about 8 minutes)
****************Next, we flash the TWRP - the flash driver SP_Flash_Tool_v5.1648_ the scatter and the TWRP are recommended - (MT6580_Android_scatter.Tht and
*Recovery-TWRP-VFD300.img) flashing.
**********We check TWRP (we clamp simultaneously ON-volume (+) release ON-opens TWRP.
**********Get Root rights ---- copy SR3-SuperSU-v2.79-SR3-20170114223742.zip to the phone folder, turn off the phone, go to TWRP find Install - SuperSu - Swaipe to instal - Dj not Install. All made happy, good luck. There will be questions [email protected]
InevitableDefeat276 said:
Yeah man! I've done that as well but had no luck .
1. I've enabled USB Debugging Mode and I've shut my phone down (NOTE: It has not been connected to the computer)
2. I opened the SP Flash tool and I clicked the download tab at the top
3. I then choose next to the scatter-file thing and have relocated it to the scatter file that I've downloaded from your link
4. ALL boxes are unchecked except recovery with download-only in the drop-down box
5. I've done the recovery image and everything and then...
6. I plug my phone in (Yes, it's completely shut down from step 1) with the USB cable and nothing shows up (Colored bars, tick etc.)
7. When I unplug it, an error comes up and then I'm completely stuck with no idea of what to do next
[UPDATE] - Does my phone have to be on the latest version?
Click to expand...
Click to collapse
you need to make sure you click download on flash tool then plug the usb in to phone and pc (also remember the battery has to be out of the phone for it to flash)
then you should see the red,yellow, green colours.
Hi all. I will be attempting to root my Vodafone VFD-300 tomorrow,after reading through the entire thread there seems to have been many issues with getting it done successfully. I also saw that it was suggested to provide step by step screenshots of the entire process. If anyone who managed to do the whole rooting with no problems could please do so again and provide us with the step by step screenshots,it would be greatly appreciated. Thanks in advance.
Hi everyone!
It was yesterday, when I plugged a 3.5 audio jack from a speaker to my Xiaomi Redmi Note 4x (Mido), the LED light flash red, and the phone turned off.I tried to turn it on, and all I got is bootloop (Mi logo with Unlocked >> Mi logo with Android, again and again)
I did a full backup in TWRP, and flashed a new rom, AND... the bootloop continue...
So I did some researches, and found a solution:
After flash a new rom, make a backup of that rom using TWRP > go to Wipe > Wipe Dalvik/Cache and wipe Cache > restore the backup and reboot.
I passed the bootloop, the MIUI 9 logo show up, setup somethings like language, accept Terms and Conditions, and... wait, there's no wifi, no signal, and definitely can not sign in to Mi Account, can not do anything, just sit there and staring at the login screen...
Then I think about the full backup up there ^
Restored, no bootloop, no Mi Account, just stuck at lockscreen, its said wrong password > back to TWRP > Advance > File Manager > /data/system > delete gatekeeper.key (2 files), locksetting (3 files), reboot and I got in to the screen.
So the problems are, there is no Wifi, no MAC address, unknown baseband, no signal.
MEID, IMEI still there, TWRP, fastboot still working.
Can someone help me about this case please!
Thank you so much!
P/s: Sorry about my English, my bad presentation ^^
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Did you tried to flash full dev firmware with Mitools? That was useful for my when I lost my EFS folder.... But first, format data and system with TWRP.
ramping said:
Did you tried to flash full dev firmware with Mitools? That was useful for my when I lost my EFS folder.... But first, format data and system with TWRP.
Click to expand...
Click to collapse
Do you mean XiaoMiTool?
If XiaoMiTool, I tried once, and fall to bootloop
tunglam24111993 said:
Hi everyone!
It was yesterday, when I plugged a 3.5 audio jack from a speaker to my Xiaomi Redmi Note 4x (Mido), the LED light flash red, and the phone turned off.I tried to turn it on, and all I got is bootloop (Mi logo with Unlocked >> Mi logo with Android, again and again)
I did a full backup in TWRP, and flashed a new rom, AND... the bootloop continue...
So I did some researches, and found a solution:
After flash a new rom, make a backup of that rom using TWRP > go to Wipe > Wipe Dalvik/Cache and wipe Cache > restore the backup and reboot.
I passed the bootloop, the MIUI 9 logo show up, setup somethings like language, accept Terms and Conditions, and... wait, there's no wifi, no signal, and definitely can not sign in to Mi Account, can not do anything, just sit there and staring at the login screen...
Then I think about the full backup up there ^
Restored, no bootloop, no Mi Account, just stuck at lockscreen, its said wrong password > back to TWRP > Advance > File Manager > /data/system > delete gatekeeper.key (2 files), locksetting (3 files), reboot and I got in to the screen.
So the problems are, there is no Wifi, no MAC address, unknown baseband, no signal.
MEID, IMEI still there, TWRP, fastboot still working.
Can someone help me about this case please!
Thank you so much!
P/s: Sorry about my English, my bad presentation ^^
Click to expand...
Click to collapse
seems like a firmware issue, i would suggest u to format data and reinstall miui
Theres a thread on the dev subforum with firmware extracted from miui full rom. Flash that via twrp.
Maybe is firmware.
Look at this.
MyNameIsRage said:
seems like a firmware issue, i would suggest u to format data and reinstall miui
Click to expand...
Click to collapse
coldplug said:
Theres a thread on the dev subforum with firmware extracted from miui full rom. Flash that via twrp.
Click to expand...
Click to collapse
jqm_ said:
Maybe is firmware.
Look at this.
Click to expand...
Click to collapse
I've tried flash a few roms for a dozen times, the result return the same.
But I will try these after work.
Thank you guys so much! :fingers-crossed::fingers-crossed::fingers-crossed:
download the modem files for mido. flash the zip. that will solve this issue. i had the same problem. flashing the modem files solved it.
MyNameIsRage said:
seems like a firmware issue, i would suggest u to format data and reinstall miui
Click to expand...
Click to collapse
coldplug said:
Theres a thread on the dev subforum with firmware extracted from miui full rom. Flash that via twrp.
Click to expand...
Click to collapse
jqm_ said:
Maybe is firmware.
Look at this.
Click to expand...
Click to collapse
My lastest backup was from a global MIUI rom flashed via XiaoMiTool.
"mido_global_images_8.1.18_20180118.0000.00_7.0_global_c557dab2eb"
(this is what I got in XiaoMiTool/rom folder in my PC).
At that thread's step 4, after flash those things, when I reboot it's show "No OS Installed, continue?"
Tried several times, same result
AND: The backup I had after I get the bootloop, not a backup when my phone still working.
i have same issue 2 weeks ago
the solution is to restore a file qcn and xqcn of the same model of your device (the exact same model)
you can restore this files by a program called QPST and you have to install qualcom driver before use of program
to use program you have to put your device in diagnostic mode enable USB debug in developer mode then use this code *#*#717717#*#* to enter diagnostic mode ( no need for root to do this )
after this your device will work but you have to restore your serial number, IMEI, wifi mac, bluetooth mac use the qualcom special tool to do this.
if you don't have the mac of wifi and bluetooth keep the one given to you by the qcn file you restored as no chance to be on same network with the same device .
NB. you can try to get your serial, IMEI, mac adresses use qualcom special tool before you start anything, so you can restore them later, you must be in diagnostic mode also to use qualcom special tool.
dr.moh1976 said:
i have same issue 2 weeks ago
the solution is to restore a file qcn and xqcn of the same model of your device (the exact same model)
you can restore this files by a program called QPST and you have to install qualcom driver before use of program
to use program you have to put your device in diagnostic mode enable USB debug in developer mode then use this code *#*#717717#*#* to enter diagnostic mode ( no need for root to do this )
after this your device will work but you have to restore your serial number, IMEI, wifi mac, bluetooth mac use the qualcom special tool to do this.
if you don't have the mac of wifi and bluetooth keep the one given to you by the qcn file you restored as no chance to be on same network with the same device .
NB. you can try to get your serial, IMEI, mac adresses use qualcom special tool before you start anything, so you can restore them later, you must be in diagnostic mode also to use qualcom special tool.
Click to expand...
Click to collapse
Tried this method yesterday, and when I try to restore, there's always an error, like "this qcn is not for my device" something, even I force it to restore, there're still an error. (I already edit the QCN file to my IMEI)
But as I said, my IMEI still there, so I stop trying that.
Now I'm stuck at bootloop, AGAIN...
tunglam24111993 said:
Tried this method yesterday, and when I try to restore, there's always an error, like "this qcn is not for my device" something, even I force it to restore, there're still an error. (I already edit the QCN file to my IMEI)
But as I said, my IMEI still there, so I stop trying that.
Now I'm stuck at bootloop, AGAIN...
Click to expand...
Click to collapse
Have u tried flashing latest firmware through twrp and then flash rom?
akisg said:
Have u tried flashing latest firmware through twrp and then flash rom?
Click to expand...
Click to collapse
You mean first format, wipe > install firmware > install rom?
akisg said:
Have u tried flashing latest firmware through twrp and then flash rom?
Click to expand...
Click to collapse
You mean:
Format dada/Wipe all > install firmware.zip > install rom.zip?
Let me try!
Do a full wipe and install the global dev ROM using TWRP. I've had that issue and it was solved using that process. Just wipe system, data, caches then install the global dev ROM using TWRP. Backups that have the firmware and bootloader partition included won't work.
tunglam24111993 said:
Tried this method yesterday, and when I try to restore, there's always an error, like "this qcn is not for my device" something, even I force it to restore, there're still an error. (I already edit the QCN file to my IMEI)
But as I said, my IMEI still there, so I stop trying that.
Now I'm stuck at bootloop, AGAIN...
Click to expand...
Click to collapse
ok my frist prolem also was bootloop
i tried every thing for 1 month even opened my device and connected the test points to reflash room as hardbricked device.
and at once every thing goes right after many failed trials now fully working device.
my advice is to read every tetourial carefully and try to read it from many sources always some small parts are missing like the correct drivers , disable windows signature enforcement, run as administrator , types of port and COM seen in device manager.
i am sure your device will work cause i have the same and no one helped in maitenance and company tell they will replace the chipset.
already i reached hard brick once in my trials there was no fastboot nor EDL.
don't stop.
---------- Post added at 04:38 PM ---------- Previous post was at 04:33 PM ----------
"this qcn is not for my device"
i got that error too when i used the one provided from internet
then i tried again with qcn i take from a friend phone we buy same models at same time
and it worked fine and no error
this is why i told you to get qcn from the same exact model
Now I'm stuck at bootloop, AGAIN... [/QUOTE]
It's hardware problem.
There's one guy get the same issues with me, he take his phone to a repair service, they replace the mainboard.
I think because of the high power (idk how to say) of the speaker, it get my device shock?
However, I send my phone to a repair service too, and still waiting for their call.
Thank you guys for your support, I really appreciated!
Same happened with me exact same with speaker
tunglam24111993 said:
It's hardware problem.
There's one guy get the same issues with me, he take his phone to a repair service, they replace the mainboard.
I think because of the high power (idk how to say) of the speaker, it get my device shock?
However, I send my phone to a repair service too, and still waiting for their call.
Thank you guys for your support, I really appreciated!
Click to expand...
Click to collapse
Same happened with me exact same with speaker
tunglam24111993 said:
It's hardware problem.
There's one guy get the same issues with me, he take his phone to a repair service, they replace the mainboard.
I think because of the high power (idk how to say) of the speaker, it get my device shock?
However, I send my phone to a repair service too, and still waiting for their call.
Thank you guys for your support, I really appreciated!
Click to expand...
Click to collapse
Could you solve the problem?
Unbrick Maze Alpha X 6/64GB only phone is black screen and phone is total brick (format all partition).
https://drive.google.com/file/d/12t3MHsAWBlXyKm_ktJt9GKqZ9sOrFRVi/view
Rom is no official :
System : official rom for Maze Alpha B6/64GB . (! no update after - OTA !!),
boot, logo and recovery is normal (copy from original my phone).
Good luck.
Sorry for bad english, my french ^^
File not found on your drive
https://drive.google.com/file/d/12t3MHsAWBlXyKm_ktJt9GKqZ9sOrFRVi/view?usp=drivesdk
full rom V03 6/64GB Rom Ofifcial Stock
https://drive.google.com/file/d/1WjXKj8abnghy_OjfUW5TYkAppjWg0amH/view?usp=sharing
Stive87 said:
Unbrick Maze Alpha X 6/64GB only phone is black screen and phone is total brick (format all partition).
https://drive.google.com/file/d/12t3MHsAWBlXyKm_ktJt9GKqZ9sOrFRVi/view
Rom is no official :
System : official rom for Maze Alpha B6/64GB . (! no update after - OTA !!),
boot, logo and recovery is normal (copy from original my phone).
Good luck.
Sorry for bad english, my french ^^
Click to expand...
Click to collapse
Update ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rafaello21 said:
Update ?
Click to expand...
Click to collapse
update possible for official rom :
full rom V03 6/64GB Rom Ofifcial Stock
https://drive.google.com/open?id=1WjXKj8abnghy_OjfUW5TYkAppjWg0amH
I am looking for a stock rom of The Alpha X 6/128.
Have you any news ?
Thanks!
Originally posted here
Flash v03, root and recover lost IMEI
I have the 6/64 version. I'll share my method with you. The only one that didn't stuck me in booting TWRP over and over again.
First, I used fastboot flash recovery recovery.img and immediately after fastboot flash boot boot.img . It's the only way I managed to escape the problem. Now, I flashed the ROM provided by them, linked in this post here #123 and I lost IMEI. I used chamelephon to insert IMEI and the IMEI is there but I can't get any signal. What to do?!
Later edit: that didn't work the second time I tried. Neither camelephon.
New method: The last thing I tried was also successful. So, I flashed the ROM they gave me (coolicool store), which you can find here. I selected "auto flash" and "except bootloader" options in SP Flash Tool, pressed "start" and let it on for 3 second and pressed "stop". Then I selected "format all+download", pressed download and connected my phone while holding VOLUME UP. I kept it pressed a few seconds after seeing the red bar getting to 100%. After flashing I started the phone and installed the latest version OTA, v04. After updating I flashed recovery by fastboot flash recovery recovery.img. Of course, I was stuck in booting in TWRP like every other time so I thought of recovering boot from a backup, and since I didn't have one of my own, I used the one provided by @dreambo found here (thanks dude). When I was prompted to select the items I want to recover, I thought of choosing only "boot", in order to restore boot, but I said why not try restoring "nvram" and "nvdata" too, maybe it will solve my other problem , the lost IMEI problem. And it worked.
I finally succeeded to restore my IMEI and boot, thanks to a recovery, which, now I see, is mandatory before every modification you implement on your phone. Especially when you don't have original ROM.
Sorry for the long post and I hope it comes in handy
Stive87 said:
Unbrick Maze Alpha X 6/64GB only phone is black screen and phone is total brick (format all partition).
Rom is no official :
System : official rom for Maze Alpha B6/64GB . (! no update after - OTA !!),
boot, logo and recovery is normal (copy from original my phone).
Good luck.
Sorry for bad english, my french ^^
Click to expand...
Click to collapse
I have a Maze Alpha X 64GB in which I can only see a black screen will not turn on at all. Only the red charging LED light turns on to say that the phone is charging and connected to the computer.
I have tried flashing the ROM in the link in your post in this thread but only receive BROM errors in the SP Flash Tool.
I have tried the second link full rom V03 6/64GB Rom Official Stock as well but this one does not have a Preloader so I cannot use this ROM to unbrick my phone as my phone will not turn on it needs a Preloader for the phone to turn on.
My phone is being detected by my computer as it makes a sound when connecting the USB cable and also shows up in the Device Manager. Have also tried another computer and tried another USB Type-C cable but only receive BROM errors in the SP Flash Tool.
I have also uninstalled and re-installed the latest Mediatek drivers.
Any ideas?
I'm pretty sure it does have a preloader, since I have used it twice to install with SPFlash Tools.
amonapophis said:
I'm pretty sure it does have a preloader, since I have used it twice to install with SPFlash Tools.
Click to expand...
Click to collapse
This ROM does not contain a Preloader:
full rom V03 6/64GB Rom Ofifcial Stock
That ROM would work if your phone is turning on. My Maze Alpha X does not turn on at all hence the need for a ROM that has a Preloader so that I can get the phone to turn on again.
I have tried the ROM in the first post in this thread I keep getting "could not get PMT info" error messages in the SP Flash Tool. That ROM has a Preloader included.
I have installed the Mediatek drivers that are on the Maze Mobile Download Center and have tried different computers with different USB Type-C cables with no luck. My Maze Alpha X is still dead and won't turn on only the red charging light turns on and stays on when connected to USB or Mains. The charging light does not go green to show that the phone is fully charged even if the phone has been plugged in for 6 to 8 hours.
Any ideas?
Don't use the one provided by OP. Use the one I got from Maze, it's complete. Download here, it's the official version. I haven't tested the one provided by OP, but the one posted by me here is the one that works. You will find a folder named 18-02-06... and inside one named R14. There you will find all the files needed, including preloader. I have to warn you, though, you will lose IMEI by flashing it ( I don't know why) and the method to restore it is quite complicated, but I wrote it above. Good luck restoring your phone!
shinystar77 said:
This ROM does not contain a Preloader:
full rom V03 6/64GB Rom Ofifcial Stock
That ROM would work if your phone is turning on. My Maze Alpha X does not turn on at all hence the need for a ROM that has a Preloader so that I can get the phone to turn on again.
I have tried the ROM in the first post in this thread I keep getting "could not get PMT info" error messages in the SP Flash Tool. That ROM has a Preloader included.
I have installed the Mediatek drivers that are on the Maze Mobile Download Center and have tried different computers with different USB Type-C cables with no luck. My Maze Alpha X is still dead and won't turn on only the red charging light turns on and stays on when connected to USB or Mains. The charging light does not go green to show that the phone is fully charged even if the phone has been plugged in for 6 to 8 hours.
Any ideas?
Click to expand...
Click to collapse
amonapophis said:
Don't use the one provided by OP. Use the one I got from Maze, it's complete. Download here, it's the official version. I haven't tested the one provided by OP, but the one posted by me here is the one that works. You will find a folder named 18-02-06... and inside one named R14. There you will find all the files needed, including preloader. I have to warn you, though, you will lose IMEI by flashing it ( I don't know why) and the method to restore it is quite complicated, but I wrote it above. Good luck restoring your phone!
Click to expand...
Click to collapse
I have tried that link just now downloaded and installed everything properly followed the instructions to a tee but still get the same errors.
I have installed the Drivers that came with the ROM that you have given to me which like you said are official directly from Maze but this has not made a difference for my Maze Alpha X 64GB.
I tried flashing with the Maze Alpha Flash Tool but just receive a DA error:
I tried flashing with the SP Flash Tool but receive a failed to get PMT info error:
Any Idea as to what I am doing wrong here or is my phone just hard-bricked?
I have noticed that on SPFT you selected "firmware upgrade". You should use "format all and download". Maybe this fixes your problem. I am not that much of a techie but I hope you will solve your problem.
amonapophis said:
I have noticed that on SPFT you selected "firmware upgrade". You should use "format all and download". Maybe this fixes your problem. I am not that much of a techie but I hope you will solve your problem.
Click to expand...
Click to collapse
I have tried Format All + Download but get this error:
I have also tried Download only but get this error:
shinystar77 said:
I have tried Format All + Download but get this error:
I have also tried Download only but get this error:
Click to expand...
Click to collapse
I'm sorry to hear that. Unfortunately, this forum seems dead and I can't help you, since I don't know that much either... It might help if you get to those phone servicing shops.