[XP][Help] Call log lag after updating to JB. - Sony Xperia P, U, Sola, Go

Hi,
After updating to latest JB I m getting call log lag. Call display on the caller screen but after 7-8 seconds attending the call i can get connected.
Plz tell me any solution.
Thanks

usmanilyas4u said:
Hi,
After updating to latest JB I m getting call log lag. Call display on the caller screen but after 7-8 seconds attending the call i can get connected.
Plz tell me any solution.
Thanks
Click to expand...
Click to collapse
this problem happened on 6.2.a.0.400 check your version by going to Settings>About phone>Build number .. if it's 6.2.a.1.100 then thats the newest version and it should be fixed.. but if not, try installing the firmware again with Sony pc companion

darkstalker2112 said:
this problem happened on 6.2.a.0.400 check your version by going to Settings>About phone>Build number .. if it's 6.2.a.1.100 then thats the newest version and it should be fixed.. but if not, try installing the firmware again with Sony pc companion
Click to expand...
Click to collapse
that problem still persists in JB. when we fresh install the firmware it will be fine for a while and after a few days it will be back. better root your phone and get one of the roms.

ikrishna said:
that problem still persists in JB. when we fresh install the firmware it will be fine for a while and after a few days it will be back. better root your phone and get one of the roms.
Click to expand...
Click to collapse
This problem is there for everyone using JB .100 FW. If your bootloader is unlocked, try to flash custom kernels.
I had this problem when I was in stock ROM, And you may experience the problem like this, when you try to swipe the to attend call it stuck in half way, and then you have to lock the screen by pressing power button and then again to unlock screen, after that swiping to attend call.
As everyone said in this thread, switch your ROM.

usmanilyas4u said:
Hi,
After updating to latest JB I m getting call log lag. Call display on the caller screen but after 7-8 seconds attending the call i can get connected.
Plz tell me any solution.
Thanks
Click to expand...
Click to collapse
I actually noticed something.. the reason our phone get slow( esp call log lag) after few days of installing firm ware is we install lot of apps. I just moved most of the apps to internal storage using app manager 3 and rebooted it. call log is now pretty responsve. i dint notice any lags either...Let me know if it works for you.

ikrishna said:
I actually noticed something.. the reason our phone get slow( esp call log lag) after few days of installing firm ware is we install lot of apps. I just moved most of the apps to internal storage using app manager 3 and rebooted it. call log is now pretty responsve. i dint notice any lags either...Let me know if it works for you.
Click to expand...
Click to collapse
The log call lag is built in, There is a MOD that has very smooth log call but IMO more laggy in contact list *sigh* we can't have it all.

Lag solved
ChikeD said:
The log call lag is built in, There is a MOD that has very smooth log call but IMO more laggy in contact list *sigh* we can't have it all.
Click to expand...
Click to collapse
I have installed in recovery "Honami Call log.zip" . After using about ten days, i m quite satisfied with butter smooth call log.... Mobile never lag while recieving or sending call...

usmanilyas4u said:
I have installed in recovery "Honami Call log.zip" . After using about ten days, i m quite satisfied with butter smooth call log.... Mobile never lag while recieving or sending call...
Click to expand...
Click to collapse
I use the Honami Phonebook v2 which is probably the same.

Related

[Q] Issue with outgoing calls on CM 10.1 based ROMs

Hi all,
For a long time I have being using CM and CM based rome like Slim. Recently (since 4.2.1 and up) I have very annoying issue that is preventing me on using these ROMs as a daily drivers. Namely when my phone boots up I can place only a couple of outgoing calls before they start being rejected with message "Call Ended". That is happening before even call is connected at 0:00. I have tried to google for the problem and have found only that some users on Motorola phones had similar issue back when GB rolled out and they have being able to temporarily correct it by deleting dialer cache. Sadly that doesn't work for me too. Only thing that I can do is to restart my phone...
Thank you for your help guys...
AdoSA said:
Hi all,
For a long time I have being using CM and CM based rome like Slim. Recently (since 4.2.1 and up) I have very annoying issue that is preventing me on using these ROMs as a daily drivers. Namely when my phone boots up I can place only a couple of outgoing calls before they start being rejected with message "Call Ended". That is happening before even call is connected at 0:00. I have tried to google for the problem and have found only that some users on Motorola phones had similar issue back when GB rolled out and they have being able to temporarily correct it by deleting dialer cache. Sadly that doesn't work for me too. Only thing that I can do is to restart my phone...
Thank you for your help guys...
Click to expand...
Click to collapse
Actually I don't know why u r facing this problem may be flashing a different modem will solve your problem
And for reboot... If u have to reboot frequently use a app (forgetting its name) that will restart all your networks in one click without rebooting...
Sent from my GT-I9100 using xda app-developers app
jeetBLswami said:
Actually I don't know why u r facing this problem may be flashing a different modem will solve your problem
And for reboot... If u have to reboot frequently use a app (forgetting its name) that will restart all your networks in one click without rebooting...
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks on ur answer but I really don't want to use some app every time I want to make a phone call. Is it possible that modem is causing issues because when I flash 4.1.2 I don't have these issues and also, like I mentioned before, I can make one or two calls after I reboot my phone.

[U] Stock ROM bug or something else?...

I have a problem in my U.
Everytime someone calls me, first the led lights up, then it vibrates about 2-3 times in the middle starts ringing and only after all that the screen turns on so i can answer or reject the call.
After i answer a call sometimes it takes 3-5 sec to hear sound from the other phone, but the caller says he can hear me the whole time.
When receiving SMS, first the led lights up, then after a while it vibrates and after that it rings, but sometimes it doesn't ring.
Another thing, it lags to much to open the contacts, phone and messages app.
My wifes Tipo dual, opens almost instantly the phone app after i touch it.
I'm using The ROM, etc that are stated in my signature.
Please help!! Already tried different kernels, etc. :crying:
It can be something in the mods or it can be the rom itself.
Didi you get these bugs before the mods?
The stock rom sucks, mine did this as well, made the phone unusable.
mirost1 said:
It can be something in the mods or it can be the rom itself.
Didi you get these bugs before the mods?
Click to expand...
Click to collapse
Already had the excessive lag opening the apps with a fresh stock ROM. Honestly i put and did so many things that i don't know now.
But i installed the Sliding XU 3.3 kernel and it's working almost fine now, only has the original lags opening the apps of the stock ROM.
theronkinator said:
The stock rom sucks, mine did this as well, made the phone unusable.
Click to expand...
Click to collapse
So wich ROM do you use

[Q] i9300 no sound in front speaker on incoming calls

Hello everyone,
Just got my S3 ( i9300 ) and surely enough flashed it to latest cm stable from their website which is 10.2.
Everything works, but I have this strange issue with incoming calls. When i answer the call, I cant hear the other person through the front speaker. I need to enable the back speaker and disable it to get sound on the front one. Sometimes the sound would be distorted. This does not happen on outgoing calls, they work perfectly fine.
I later flashed kitkat nightly and it had the same issue.
Problem goes away if i recover to stock. Unfortunately, i can't stand the damn thing.
Baseband v: I9300XXUGMK6, which is the newest for my region and also seems to be most common.
I tried googling, but couldnt find this specific glitch.
Any suggestions would be appriciated.
Thanks
Same problem, same story
feiks said:
Hello everyone,
Just got my S3 ( i9300 ) and surely enough flashed it to latest cm stable from their website which is 10.2.
Everything works, but I have this strange issue with incoming calls. When i answer the call, I cant hear the other person through the front speaker. I need to enable the back speaker and disable it to get sound on the front one. Sometimes the sound would be distorted. This does not happen on outgoing calls, they work perfectly fine.
I later flashed kitkat nightly and it had the same issue.
Problem goes away if i recover to stock. Unfortunately, i can't starrt d the damn thing.
Baseband v: I9300XXUGMK6, which is the newest for my region and also seems to be most common.
I tried googling, but couldnt find this specific glitch.
Any suggestions would be appriciated.
Thanks
Click to expand...
Click to collapse
I have the same problem, have you found a solution?
benschhold said:
I have the same problem, have you found a solution?
Click to expand...
Click to collapse
I'm very happy to report, that yes I have. Archidroid rom ( 2.4.6 is the latest stable ).
Occasionally, I still get the same glitch, but it happens once every three reboots and goes away after first time it occurs.
Edit: i've also flashed the new baseband which comes with the rom: I9300XXUGNA8
feiks said:
I'm very happy to report, that yes I have. Archidroid rom ( 2.4.6 is the latest stable ).
Occasionally, I still get the same glitch, but it happens once every three reboots and goes away after first time it occurs.
Edit: i've also flashed the new baseband which comes with the rom: I9300XXUGNA8
Click to expand...
Click to collapse
I had the 2.4.5 installed and had to switch because of the issue, so i switched to archidroid 1.x version and problem was gone, now on archiport(ultimarom beta1) the problem is there again. Thats real sad because the rom is such awesome
So i think sammy had done something in their 4.3 version that fixed that
benschhold said:
I had the 2.4.5 installed and had to switch because of the issue, so i switched to archidroid 1.x version and problem was gone, now on archiport(ultimarom beta1) the problem is there again. Thats real sad because the rom is such awesome
So i think sammy had done something in their 4.3 version that fixed that
Click to expand...
Click to collapse
That's really odd, since I've been using Archi ever since I first flashed it ( at the time I believe it was 2.3.x ), and I'm a happpy user since then.
try dialing outgoing call to whatever number a couple of times and then get some incoming calls?
And yes, Archidroid is awesome, has everything you could possibly want ( the only exception being MHL )
feiks said:
That's really odd, since I've been using Archi ever since I first flashed it ( at the time I believe it was 2.3.x ), and I'm a happpy user ever since.
try dialing outgoing call to whatever number a couple of times and then get some incoming calls?
And yes, Archidroid is awesome, has everything you could possibly want ( the only exception being MHL )
Click to expand...
Click to collapse
I just have to activate loud speaker and then deactivate during call and sound is normal, a lot of users have the same issue but noone have a 100% solution. I know its awesome and will give it a shot when he release his 2.4.7 with CM
benschhold said:
I just have to activate loud speaker and then deactivate during call and sound is normal, a lot of users have the same issue but noone have a 100% solution. I know its awesome and will give it a shot when he release his 2.4.7 with CM
Click to expand...
Click to collapse
After i had a go with Omni, I can't think of any reason why should I switch back to CM. Arhci mentioned CM's support and developer base as a reason for the switch, will see...
I use my phone at work quite heavily and it's just impossible for me to switch back and forth speakers.
Found something interesting in kryten2k35 thread... Will report
CallSoundRepair.apk - Work as well
Hello folks.
As a little hint, 'cause I had the same problem about the sound where I fixed it, with apk, check the link below, I hope that it can might work for you too.
Topic Forum = http://forum.xda-developers.com/showpost.php?p=50065763&postcount=154
Directly apk = http://forum.xda-developers.com/attachment.php?attachmentid=2560477&d=1391607726

[help] Problem dialing with Xperia Go

I have problem with my Xperia GO mobile phone. The problem is following: when I dial number is need a few second (5-6) for dial a number. I have android 4.1.2 . Also when anyone call me and when I answer the call it is still vibrate my mobile 3-4 second. I tried to reset my mobile phone (factory reset) but the problem is again. My call log is empty and I have not a lot of apps. Anyone to help me how to fix this problem?Sry for my English. Thank you
its a bug, happened with me too, and its not related to how many apps you have.
try this : http://forum.xda-developers.com/xperia-u/themes-apps/mod-z1-phonebook-xperia-t2650232
this phonebook too has small bug (in call logs) but otherwise its a fine app.
you might need supersuser mod for this to work. you can install the package from here, or do it manually too. search in forums for it.
please note : this app too lags while launching but delay is only of 1~2 sec. i have no other issues.
dragansk said:
I have problem with my Xperia GO mobile phone. The problem is following: when I dial number is need a few second (5-6) for dial a number. I have android 4.1.2 . Also when anyone call me and when I answer the call it is still vibrate my mobile 3-4 second. I tried to reset my mobile phone (factory reset) but the problem is again. My call log is empty and I have not a lot of apps. Anyone to help me how to fix this problem?Sry for my English. Thank you
Click to expand...
Click to collapse
I did not make any action. First of all I uninstalled my Viber application and now I have not the problem with my dialing and receiving calls.
Is this Viber bug or andorid bug? How to fix it?
I want to use Viber and this issue to be fixed.
dragansk said:
I did not make any action. First of all I uninstalled my Viber application and now I have not the problem with my dialing and receiving calls.
Is this Viber bug or andorid bug? How to fix it?
I want to use Viber and this issue to be fixed.
Click to expand...
Click to collapse
Hi!
I have this bug with or without Viber since android 4.1.2 or higher Android version (Stock, FXP, CM10, CM11)!
No success, no solved! Tryed increase RAM with swapper: no success!
I'm clueless!
And I'm desperate!
I can not believe that there is no solution
:crying:
papzi57 said:
Hi!
I have this bug with or without Viber since android 4.1.2 or higher Android version (Stock, FXP, CM10, CM11)!
No success, no solved! Tryed increase RAM with swapper: no success!
I'm clueless!
And I'm desperate!
I can not believe that there is no solution
:crying:
Click to expand...
Click to collapse
I contacted Sony technical support and they told me to repair my mobile phone. So I did not repair my mobile software. When I uninstalled Viber app the problem was solved.
After that I permanently deleted all viber files with File Manager on my sdcard memory (Viber folder with all stickers,backgrounds,user photos etc..) and I reinstalled again the Viber. Now I have Viber and I dont have problem.
I dont know how it solved on my Xperia hahah . Try to repair will be solved
How to repair?
Before you start the software repair, you need to have the PC Companion application installed on your computer. PC Companion is preloaded in the memory of your phone for direct installation but also you can download PC Companion to your Windows computer from this link for free http://www.sonymobile.com/gb/tools/pc-companion/
To update your device software using the PC Companion application
1. Turn on your Android™ device and connect it to a PC using a USB cable.
2. Computer: Wait a few seconds for PC Companion to start. If PC Companion doesn’t start automatically, you can start it from the start menu on the computer.
3. Computer: In the Support Zone application, click Start, and then select the Phone Software Update option.
Follow the instructions on the screen. Please note that you should not disconnect the USB cable when updating your device as it can damage the content being transferred.
I had this problem, and I never even installed viber...
If it was solved for you by removing viber, let's say you might have had ram shortage, or viber extension to phonebook is buggy..
Anyways, the problem is solved. Cheers!
Sent from my ST27i
deshx said:
I had this problem, and I never even installed viber...
If it was solved for you by removing viber, let's say you might have had ram shortage, or viber extension to phonebook is buggy..
Anyways, the problem is solved. Cheers!
Sent from my ST27i
Click to expand...
Click to collapse
You solved this dial problem?
Could you share your method?
i already did !
see my first post in this thread.
you should try this phonebook. as i said earlier, it will need superuser. details are in first post.
and other things you can try :
- turn off sync for contacts from fb, viber etc.
- add exception of contacts, phone and other related apps in stamina mode (if you use stamina mode, it helped me alot ).
papzi57 said:
You solved this dial problem?
Could you share your method?
Click to expand...
Click to collapse
It works on CM10-CM11?
Now I have CM10, without viber, without any contact sync, without stamina, but with dialling bug.
I can make call ONLY after reboot. After a few hours can't make call or receving call!
In this weekend I try downgrade to ICS and I hope...
Don't know if it works with CM,see the thread for support.
But you can search for another phonebook which works with cm.
And your problem is different.
I heard about it somewhere, it might be related to kitkat os.
KK was having problems with 3G.
Signal loss etc.
It was temporarily solved by switching to GSM mode.
Default is wcdma(preferred) /GSM.
Sent from my ST27i
deshx said:
Don't know if it works with CM,see the thread for support.
But you can search for another phonebook which works with cm.
And your problem is different.
I heard about it somewhere, it might be related to kitkat os.
KK was having problems with 3G.
Signal loss etc.
It was temporarily solved by switching to GSM mode.
Default is wcdma(preferred) /GSM.
Sent from my ST27i
Click to expand...
Click to collapse
CM10 = Jelly Bean
Cyanogenmod uses another kernel and phone/phonebook app as stock firmware. But the simptome is the same: ONLY call can't making or receviing!
Never ever app freezing, ONLY the com.android.phone!
OK, I'll try ICS, other say: ICS fw don't have this bug.
Yes, ICS don't have this bug. (i used ics for about 2 months before JB was released. no problems there...)
papzi57 said:
CM10 = Jelly Bean
Cyanogenmod uses another kernel and phone/phonebook app as stock firmware. But the simptome is the same: ONLY call can't making or receviing!
Never ever app freezing, ONLY the com.android.phone!
OK, I'll try ICS, other say: ICS fw don't have this bug.
Click to expand...
Click to collapse
Hi!
Disabled the contact syncronising (google, FB, etc.), seems like solved the bug.
good to know that my method worked for you too.
i think the lag is caused by some dynamic features of the phonebook.
NOTE : Disabling sync might increase the overall load and response time, but you should manually sync your contacts with at least one online account regularly, to avoid data loss. OR, you can make backups to internal/ sd card too.
papzi57 said:
Hi!
Disabled the contact syncronising (google, FB, etc.), seems like solved the bug.
Click to expand...
Click to collapse

Audio call error on Android 5.1.1 Sony Z2

When i updated Android to 5.1.1 on OTA for my Xperia Sony Z2 a few months ago, my phone started to have some problems with audio call, especially the person who receive call can not hear me clearly.
I came to some phone store and check my phone and they found the problem comes from updated software, so they changed it down to Android 4.4, then every thing would be ok at that time.
The second time, I automatically updated it to Android 5.1.1 again on OTA and hoped that it wouldn't have problem that time, but it falled to the same problem before.
After that, I started to use Xperia firmware v.4.8.2 on this website and Flashtool 0.9.20.0 to set up 5.1.1 again to my phone by PC. But the problem of audio call still couldn't be solve.
Please help me to find and solve this problem,
Thanks so much!
Jolie Dam.
That is very strange just for software, you can try flash custom rom
Re:
lokitooxd said:
That is very strange just for software, you can try flash custom rom
Click to expand...
Click to collapse
Dear,
I flashed 2 times, but the result was the same (
Same issue
Jolie Dam said:
When i updated Android to 5.1.1 on OTA for my Xperia Sony Z2 a few months ago, my phone started to have some problems with audio call, especially the person who receive call can not hear me clearly.
I came to some phone store and check my phone and they found the problem comes from updated software, so they changed it down to Android 4.4, then every thing would be ok at that time.
The second time, I automatically updated it to Android 5.1.1 again on OTA and hoped that it wouldn't have problem that time, but it falled to the same problem before.
After that, I started to use Xperia firmware v.4.8.2 on this website and Flashtool 0.9.20.0 to set up 5.1.1 again to my phone by PC. But the problem of audio call still couldn't be solve.
Please help me to find and solve this problem,
Thanks so much!
Jolie Dam.
Click to expand...
Click to collapse
Yeah I do have the same issue. From 5.1.1 to 6.0.1, my microphone seems not working (sometimes it works but I have to shout a bit so the other person could hear me). Flashed different rom from other regions by flashtool, enabled/disbaled Sound Recorder app... sometimes it works but most of the time, it doesn't.
Re: Azmil
Azmil2307 said:
Yeah I do have the same issue. From 5.1.1 to 6.0.1, my microphone seems not working (sometimes it works but I have to shout a bit so the other person could hear me). Flashed different rom from other regions by flashtool, enabled/disbaled Sound Recorder app... sometimes it works but most of the time, it doesn't.
Click to expand...
Click to collapse
Yes, It's so tired of shouting whenever call someone.
I did set up follow my phone's market regions but may be the problem came from some other reasons.
I too have this issue with my z2.
I tried this solution
Try to turn off microphone noise supression in Settings >> Call >> Microphone noise suppression Off
After this other person on the call can hear me better.
@monty: Thanks so much for your tip, I've set up my phone again by Sony PC Companion, then set noise suppression Off, and, the result is ...lalala... I've done!
I tried some call and the sound is so good, that' so great ^^ <3

Categories

Resources