Hey Guys I have a Verizon S4 I am attempting to help a friend with he completely bricked it. Now only accessible option is ODIN Mode. I have tried 4 different versions of ODIN and 6 different tar files including the full wipe and everytime ODIN fails. I'm completely lost I personally have a L720 Sprint S4 and things are a little different but I cannot figure out anything to get this phone booted.
This is all I see.
ODIN Mode
Product Name: SCH-I545
Current Binary: Samsung Official
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty VOID: 0x0
CSB-CONFIG-LSB: 0x30
Write Protection: ENABLE
Okay so Im assuming this phone either had the OTA Update and is on a Knox Bootloader. Like I said I don't care how I have to go about getting this phone booted any suggestions would help. I have bricked my L720 before and never had problems like this.
Thanks in Advance.
Would anyone be willing to help me? This is my Odin Log, no matter what I try to flash. This is what happens.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sbl1.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sbl2.mbn
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/008> Added!!
GramKrackr said:
Would anyone be willing to help me? This is my Odin Log, no matter what I try to flash. This is what happens.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sbl1.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sbl2.mbn
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/008> Added!!
Click to expand...
Click to collapse
are you trying to load stock ME7 on the device? if so and the device had a different version on it such as MJ7 you cannot go backwards and the odin flash will fail, try flashing stock MJ7 on the device and see if that helps
GramKrackr said:
Hey Guys I have a Verizon S4 I am attempting to help a friend with he completely bricked it. Now only accessible option is ODIN Mode. I have tried 4 different versions of ODIN and 6 different tar files including the full wipe and everytime ODIN fails. I'm completely lost I personally have a L720 Sprint S4 and things are a little different but I cannot figure out anything to get this phone booted.
This is all I see.
ODIN Mode
Product Name: SCH-I545
Current Binary: Samsung Official
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty VOID: 0x0
CSB-CONFIG-LSB: 0x30
Write Protection: ENABLE
Okay so Im assuming this phone either had the OTA Update and is on a Knox Bootloader. Like I said I don't care how I have to go about getting this phone booted any suggestions would help. I have bricked my L720 before and never had problems like this.
Thanks in Advance.
Click to expand...
Click to collapse
If I'm not mistaken, the "Knox Warranty Void" flag showed up in MJ7, so you need to flash MJ7. Your log shows you flashing ME7, which is not going to work. The bootloader will not allow you to downgrade.
No-wipe and full-wipe images for MJ7 are available in the Android Development forum.
Related
So pretty much no matter what I try flashing I get the following immediately: Any ideas?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRAMC3_RESTORE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried different versions of stock, 4.4, clockwork mod, odin 3.07, 3.09, I've uninstalled and re-installed Kies. right now my phone can't do anything but be in download mode.
ODIN MODE
Product Name: GT-N7100
Current Binary: Samsung Official
System Status: Custom
KNOX Warranty VOID: 0
AP SWREV: A2
BrianAnim said:
So pretty much no matter what I try flashing I get the following immediately: Any ideas?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRAMC3_RESTORE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried different versions of stock, 4.4, clockwork mod, odin 3.07, 3.09, I've uninstalled and re-installed Kies. right now my phone can't do anything but be in download mode.
ODIN MODE
Product Name: GT-N7100
Current Binary: Samsung Official
System Status: Custom
KNOX Warranty VOID: 0
AP SWREV: A2
Click to expand...
Click to collapse
Me too. Does misery like company?
I called verizon and told them it failed during an OTA update. They are shipping me out a new phone under warranty.
BrianAnim said:
So pretty much no matter what I try flashing I get the following immediately: Any ideas?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRAMC3_RESTORE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried different versions of stock, 4.4, clockwork mod, odin 3.07, 3.09, I've uninstalled and re-installed Kies. right now my phone can't do anything but be in download mode.
ODIN MODE
Product Name: GT-N7100
Current Binary: Samsung Official
System Status: Custom
KNOX Warranty VOID: 0
AP SWREV: A2
Click to expand...
Click to collapse
If you have a Verizon Note 2 which is SCH-i605 then I can tell you why Odin isn't working. You flashed a bootloader for the GT-N7100.
These are what I've tried flashing:
N7100XXUFNG4_N7100OLBFNG1_N7100DXUFND2_HOME.tar.md5
N7100XXUFNE1_N7100BTUFNE1_N7100XXUFND3_HOME.tar.md5
N7100XXUFND3_N7100OXAFND3_N7100XXUFND3_HOME.tar.md5
I605_VRALJB_Restore.tar.md5
KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5
KS_MULTI_CSC_N7100XXUEMK4.tar.md5
BrianAnim said:
These are what I've tried flashing:
N7100XXUFNG4_N7100OLBFNG1_N7100DXUFND2_HOME.tar.md5
N7100XXUFNE1_N7100BTUFNE1_N7100XXUFND3_HOME.tar.md5
N7100XXUFND3_N7100OXAFND3_N7100XXUFND3_HOME.tar.md5
I605_VRALJB_Restore.tar.md5
KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5
KS_MULTI_CSC_N7100XXUEMK4.tar.md5
Click to expand...
Click to collapse
You see all those files that say N7100. That is for a different phone. Not the i605. That is why your phone isn't working. There are a couple of ways to fix the problem in the general section of this forum for the Verizon note 2. I just don't have the time to find them. Also there is mobiltechvideos which I believe can fix this problem for a fee.
BluGuy said:
You see all those files that say N7100. That is for a different phone. Not the i605. That is why your phone isn't working. There are a couple of ways to fix the problem in the general section of this forum for the Verizon note 2. I just don't have the time to find them. Also there is mobiltechvideos which I believe can fix this problem for a fee.
Click to expand...
Click to collapse
Ah, my phone starts up and said n7100 so that's where the confusion lay. I already have my replacement phone and all is well.
I was having serious restarting randomly problems with the old phone and it needed to be RMA'd anyway so no biggy. Thanks for all your help.
An admin can lock this thread.
I tried to install cm on to my rwc sgh-1337m but it failed halfway through the download so i then tried to reflash and older 4.2.2 rom that i know worked on this device before but this time I kept getting fail(auth) in odin (3.07 & 3.09). I tried a different rwc sgh-i337m rom it didn't fail but it got stuck on the samsung splash screen the last time I tried to reflash I checked nand erase all (I read a couple sources that said it might help) but that did nothing. Before I tried to put cm on I had root with kt sgs4 kernel and stock touchwiz. Any suggestions there's still a year contract with rogers on this phone so I obviously don't want to have a bricked phone.
if this helps the roms I tried to flash were:
I337MVLUAMDJ_I337MOYAAMDJ_I337MVLUAMDJ
I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6
I also still have the kernel is not seandroid enforcing and warranty bit kernel in the top left when booting.
Text after flashing the Fail rom:
ODIN MODE
PRODUCT NAME: SGH-I337M
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE: enabled
START[224, 1440]
BAR[240, 1440]
SW REV. CHECK FAIL : fused : 4 , Binary : 3
Odin log for first rom
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> NON-HLOS.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
So my friend asked me to try to fix his phone (no really, it's not mine).
He had an old i605 that he wanted to use on Tmobile. He had it rooted with with a custom rom (Jedi X) installed but was having difficulty getting LTE or HSPA. He decided to flash the MK7 modem for the t889, which has resulted in a soft brick.
So, this is where I'm at. I have been trying to flash the stock firmware over ODIN but I keep getting a write error. I can only boot into download mode, can not get into CWM which was installed previously. I can not boot into the Rom either.
Here is the log from ODIN:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_stock_system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> system.img
<ID:0/008> NAND Write Start!!
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008>
<ID:0/008> Receive Response form LOKE
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
The top left of download mode i have:
ODIN MODE
Product name: SGH-T889 (this phone is actually the i605, I swear)
Custom Binary Download: Yes (1 counts)
Current Binary: Samsung Official
System Status: Custom
KNOX Warranty VOID: 0
RP SWREV: A2
I've tried pretty much everything that I can think of. I read in another thread to try to flash the same file over and over without clearing or closing ODIN, but that didn't work. I've been reading all day, attempting to find different stock packages to flash, all with no success. I've tried to flash a new PIT file; you name it, I've tried it. I'm concerned that it will need a JTAG fix. I'm hoping that I'm missing something simple ... or complex, I don't care at this point. Hopefully we don't have to send it for a JTAG, but if we do, then we will.
If anyone has any suggestions, please send them my way.
Resistor trick should bring it back from the dead
---------- Post added at 10:59 AM ---------- Previous post was at 10:56 AM ----------
http://forum.xda-developers.com/showthread.php?t=2690033
Helo there XDA. I joined the site today because I have a difficult problem that I am working on.
I have the Verizon Galaxy S4 phone running Lollipop 5.0.1, build number I545VRUGOC1.
I have tried to root my phone using motochopper, towelroot, KingRoot, and many others with no luck. I have also tried to flash custom pre-rooted I545VRUGOC1 firmwares. Also no luck.
This is the consistent error that Odin throws me every time:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MD2_423399_Kernel.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
After many attempts at installing custom firmwares, flashing roms, using rooting tools, etc, my phone now says:
Software Update Failed
With the information:
Code:
ODIN MODE
PRODUCT NAME: SCH-I545
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
CSB-CONFIG-LSB: 0x30
SECURE DOWNLOAD: ENABLE
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
START [224, 1440]
SYS REV CHECK FAIL[K] : No Version
SECURE MAGICODE CHECK FAIL : boot
I just need to root my galaxy s4. I do not care whether my phone is lollipop, kitkat, whatever. If downgrading is what must be done to root then that is fine I just need to know what is going on.
Thanks,
Eveno
You could have saved all that time by doing a simple search first. There is no downgrading or rooting once you're on the factory OC1.
I got samsung I337 fully working phone and it had only one problem that it did not let us to select network mode and i tried to reflash the phone but stuck at " Firmware upgrade encountered an issue and flashing always failed.
In Download Mode it shows these things
Odin Mode
Product name: SGH-I337
Current Binary: Samsung Official
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warrenty Void: 0x0
CSB-CONFIG-LSB:0X30
Waite Protection: Enable
eMMC Burst MODE enabled
So then i tried the odin method and downloaded both the 1337DB and DL file and tried running them in Odin. Odin fails and shows this in the messages:
I already tried with NCB1 firmware but its gives error at system file with pit and without pit.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this occurs whether i check the boxes or not and if i add a pit file or not. Then on my phone it says in red, " SW REV. CHECK FAIL: fused:4, Binary 1".
Need perfect solution for it please help.
Following. I have the same situation.
kuljindersaini said:
I got samsung I337 fully working phone and it had only one problem that it did not let us to select network mode and i tried to reflash the phone but stuck at " Firmware upgrade encountered an issue and flashing always failed.
In Download Mode it shows these things
Odin Mode
Product name: SGH-I337
Current Binary: Samsung Official
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warrenty Void: 0x0
CSB-CONFIG-LSB:0X30
Waite Protection: Enable
eMMC Burst MODE enabled
So then i tried the odin method and downloaded both the 1337DB and DL file and tried running them in Odin. Odin fails and shows this in the messages:
I already tried with NCB1 firmware but its gives error at system file with pit and without pit.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this occurs whether i check the boxes or not and if i add a pit file or not. Then on my phone it says in red, " SW REV. CHECK FAIL: fused:4, Binary 1".
Need perfect solution for it please help.
Click to expand...
Click to collapse
If I understand you, U've tried two different firmware and they fail at different lengths.
Okay try flashing any custom recovery, I'd prefer Twrp. Try booting to recovery. If it boots lemme know.
It is not possible to install TWRP on the AT&T i337 S4.
Are you sure? I'm pretty sure there's a twrp recovery for the i337 except u are not keen with the search button. Im not sure if I'm allowed to post links, so I'd suggest you search through google u are sure to get one.
Oh, I'm familiar with the search function. I've been searching special topic forums ever since forums were created years ago. Newer bootloaders for the i337 are locked down solid. I think I would pee myself for joy if someone came up with a way to load a custom recovery for the i337 with the OK3 build. From what I get, there's nothing you can do once you have NB1 or newer.
OK if that's the case, get a mk3 rom, unpack the tar and remove the aboot file, (if it's a 4file repair fw, just don't add the aboot.) decompress the mk3.tar with 7zip remove the aboot repack it and flash via Odin.