I tried to install cm on to my rwc sgh-1337m but it failed halfway through the download so i then tried to reflash and older 4.2.2 rom that i know worked on this device before but this time I kept getting fail(auth) in odin (3.07 & 3.09). I tried a different rwc sgh-i337m rom it didn't fail but it got stuck on the samsung splash screen the last time I tried to reflash I checked nand erase all (I read a couple sources that said it might help) but that did nothing. Before I tried to put cm on I had root with kt sgs4 kernel and stock touchwiz. Any suggestions there's still a year contract with rogers on this phone so I obviously don't want to have a bricked phone.
if this helps the roms I tried to flash were:
I337MVLUAMDJ_I337MOYAAMDJ_I337MVLUAMDJ
I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6
I also still have the kernel is not seandroid enforcing and warranty bit kernel in the top left when booting.
Text after flashing the Fail rom:
ODIN MODE
PRODUCT NAME: SGH-I337M
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE: enabled
START[224, 1440]
BAR[240, 1440]
SW REV. CHECK FAIL : fused : 4 , Binary : 3
Odin log for first rom
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> NON-HLOS.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Related
Dears,
I have Samsung Galaxy S4 I9500 with below details:
((
Model: I9500
FCC ID: A3LGTI9500
SSN: I9500GSMH
IMEI: 357357/05/432290/7
IMEI: 357357054322907
S/N: R21D50R0NJH
Country of Origin: Korea
))
But I am located in Iraq and the phone had warranty, but now not
the S4 hanged, and when we took out the battery and put it back, it hanged again, then it went to boot loop.
We tried many Firmware like below, even we tried custom as well:
Official Iraq Firmware:
I9500XXUBMEA_I9500OJVBMEA_I9500XXUBMEA_HOME.tar.md5
I9500XXUFNB4_I9500OJVFNC1_I9500XXUFNC1_HOME.tar.md5
I9500XXUEMJ8_I9500OJVEMJ8_I9500XXUEMJ8_HOME.tar.md5
Custom CWM:
CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5
cofface_I9500_cwm_recovery_en_new.tar
philz_touch_6.07.9-i9500.tar.md5
TWRP:
openrecovery-twrp-2.6.3.1-i9500.tar.md5
Odin:
Odin3-v3.07
Odin3v09
Odin3v185
PIT:
adonis.pit
Even latest Samsung driver and Kies is installed.
what I can see in Odin, is the following error (it is valid for all Stock Firmware):
((
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUFNB4_I9500OJVFNC1_I9500XXUFNC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> param.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
))
which it is getting failed in system.img part.
Really appreciate your kind support to state which Firmware I need to use in order to make the phone up again.
P.S: I can see the following info during downloading Mode:
((
PRODUCT NAME: GT-I9500
CURRENT BINARY: Custom
System Status: Custom
KNOX WARRANTY VOID: 1
AP SWREV: A3
))
waiting your kind feedbacks.
thanks and best regards
Barznj
Dears,
I have Samsung Galaxy S4 I9500 with below details:
((
Model: I9500
FCC ID: A3LGTI9500
SSN: I9500GSMH
IMEI: 357357/05/432290/7
IMEI: 357357054322907
S/N: R21D50R0NJH
Country of Origin: Korea
))
But I am located in Iraq and the phone had warranty, but now not
the S4 hanged, and when we took out the battery and put it back, it hanged again, then it went to boot loop.
We tried many Firmware like below, even we tried custom as well:
Official Iraq Firmware:
I9500XXUBMEA_I9500OJVBMEA_I9500XXUBMEA_HOME.tar.md5
I9500XXUFNB4_I9500OJVFNC1_I9500XXUFNC1_HOME.tar.md5
I9500XXUEMJ8_I9500OJVEMJ8_I9500XXUEMJ8_HOME.tar.md5
Custom CWM:
CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5
cofface_I9500_cwm_recovery_en_new.tar
philz_touch_6.07.9-i9500.tar.md5
TWRP:
openrecovery-twrp-2.6.3.1-i9500.tar.md5
Odin:
Odin3-v3.07
Odin3v09
Odin3v185
PIT:
adonis.pit
Even latest Samsung driver and Kies is installed.
what I can see in Odin, is the following error (it is valid for all Stock Firmware):
((
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUFNB4_I9500OJVFNC1_I9500XXUFNC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> param.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
))
which it is getting failed in system.img part.
Really appreciate your kind support to state which Firmware I need to use in order to make the phone up again.
P.S: I can see the following info during downloading Mode:
((
PRODUCT NAME: GT-I9500
CURRENT BINARY: Custom
System Status: Custom
KNOX WARRANTY VOID: 1
AP SWREV: A3
))
waiting your kind feedbacks.
thanks and best regards
Barznj
So pretty much no matter what I try flashing I get the following immediately: Any ideas?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRAMC3_RESTORE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried different versions of stock, 4.4, clockwork mod, odin 3.07, 3.09, I've uninstalled and re-installed Kies. right now my phone can't do anything but be in download mode.
ODIN MODE
Product Name: GT-N7100
Current Binary: Samsung Official
System Status: Custom
KNOX Warranty VOID: 0
AP SWREV: A2
BrianAnim said:
So pretty much no matter what I try flashing I get the following immediately: Any ideas?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRAMC3_RESTORE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried different versions of stock, 4.4, clockwork mod, odin 3.07, 3.09, I've uninstalled and re-installed Kies. right now my phone can't do anything but be in download mode.
ODIN MODE
Product Name: GT-N7100
Current Binary: Samsung Official
System Status: Custom
KNOX Warranty VOID: 0
AP SWREV: A2
Click to expand...
Click to collapse
Me too. Does misery like company?
I called verizon and told them it failed during an OTA update. They are shipping me out a new phone under warranty.
BrianAnim said:
So pretty much no matter what I try flashing I get the following immediately: Any ideas?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRAMC3_RESTORE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried different versions of stock, 4.4, clockwork mod, odin 3.07, 3.09, I've uninstalled and re-installed Kies. right now my phone can't do anything but be in download mode.
ODIN MODE
Product Name: GT-N7100
Current Binary: Samsung Official
System Status: Custom
KNOX Warranty VOID: 0
AP SWREV: A2
Click to expand...
Click to collapse
If you have a Verizon Note 2 which is SCH-i605 then I can tell you why Odin isn't working. You flashed a bootloader for the GT-N7100.
These are what I've tried flashing:
N7100XXUFNG4_N7100OLBFNG1_N7100DXUFND2_HOME.tar.md5
N7100XXUFNE1_N7100BTUFNE1_N7100XXUFND3_HOME.tar.md5
N7100XXUFND3_N7100OXAFND3_N7100XXUFND3_HOME.tar.md5
I605_VRALJB_Restore.tar.md5
KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5
KS_MULTI_CSC_N7100XXUEMK4.tar.md5
BrianAnim said:
These are what I've tried flashing:
N7100XXUFNG4_N7100OLBFNG1_N7100DXUFND2_HOME.tar.md5
N7100XXUFNE1_N7100BTUFNE1_N7100XXUFND3_HOME.tar.md5
N7100XXUFND3_N7100OXAFND3_N7100XXUFND3_HOME.tar.md5
I605_VRALJB_Restore.tar.md5
KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5
KS_MULTI_CSC_N7100XXUEMK4.tar.md5
Click to expand...
Click to collapse
You see all those files that say N7100. That is for a different phone. Not the i605. That is why your phone isn't working. There are a couple of ways to fix the problem in the general section of this forum for the Verizon note 2. I just don't have the time to find them. Also there is mobiltechvideos which I believe can fix this problem for a fee.
BluGuy said:
You see all those files that say N7100. That is for a different phone. Not the i605. That is why your phone isn't working. There are a couple of ways to fix the problem in the general section of this forum for the Verizon note 2. I just don't have the time to find them. Also there is mobiltechvideos which I believe can fix this problem for a fee.
Click to expand...
Click to collapse
Ah, my phone starts up and said n7100 so that's where the confusion lay. I already have my replacement phone and all is well.
I was having serious restarting randomly problems with the old phone and it needed to be RMA'd anyway so no biggy. Thanks for all your help.
An admin can lock this thread.
So I was gifted a Verizon Samsung Galaxy S4. I decided to factory reset it and wipe all data/cache. That was successful and I booted into the phone. I got stuck on the Samsung reactivation lock page. I had trouble logging, and there was an SSL error (caused by the unset date/time). I decided just to flash the stock rom, but this only caused more trouble.
I went into download mode, connected the USB, started Odin (tested with version 3.04, 3.09, 3.10, and 3.12), and tested 3 roms from these two pages:
http://forum.xda-developers.com/showthread.php?t=2289325
http://forum.xda-developers.com/showthread.php?t=2735172
This is the output log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've used different USB cables, USB ports, versions of Odin, roms, I tried using a pit file, disabling my antivirus, but nothing is working. If I try to boot the phone normally or go to the volume up menu it redirects me to this page: http://androidcentral.us/wp-content/uploads/2013/09/Firmware-upgrade-error.png
Verizon and Kies (they were both off during the Odin flash attempts) are unable to see the phone in download mode and the error page above.
Some additional information. In the top left of the device it displays this:
DOIN MODE
PRODUCT NAME: SCH-I545
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: ON
CSB-CONFIG-LSB: 0x30
SECURE DOWNLOAD : ENABLE
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
and after a failed Odin attempt:
START [224, 1440]
SW REV. CHECK FAIL : fused : 8, Binary: 1
I had a friend give me his cracked S4 and I just swapped out the parts. Everything is working fine now, can a mod close this?
I had a n8010 with a custom ROM flashed into it and it was operating Android 4.1.2. In order to be able to receive the latest updates and revert to the original ROM (which I did not back up at the time) I tried flashing with Odin 3.12 after booting the tablet into download mode. However, the process failed and the Odin log is as follows:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I tried a second pass and it also failed in the options tab only "Auto Reboot" and "F. Reset Time" were clicked and AP type was ticked for the ROM ending with "tar.md5". I think my tablet is in the state what is called soft brick, how can I recover it and install the default stock ROM?
The device also has an SD card and when I unplug it Odin is stuck at "SetupConnection" step; I think this is an important observation. The Odin mode screen has the following information:
ODIN MODE
PRODUCT MODE: GT-N8010
CURRENT BINARY: Samsung Official ---Yet it still refuses to update so I attempted all of this.
SYSTEM STATUS: Custom
AP SWREV: A2
EDIT: After removing and inserting the SD card Odin was able to perform an installation of the stock OS. I hope it is a clean install and still have no idea why these problems occurred.
Thanks in advance