Dears,
I have Samsung Galaxy S4 I9500 with below details:
((
Model: I9500
FCC ID: A3LGTI9500
SSN: I9500GSMH
IMEI: 357357/05/432290/7
IMEI: 357357054322907
S/N: R21D50R0NJH
Country of Origin: Korea
))
But I am located in Iraq and the phone had warranty, but now not
the S4 hanged, and when we took out the battery and put it back, it hanged again, then it went to boot loop.
We tried many Firmware like below, even we tried custom as well:
Official Iraq Firmware:
I9500XXUBMEA_I9500OJVBMEA_I9500XXUBMEA_HOME.tar.md5
I9500XXUFNB4_I9500OJVFNC1_I9500XXUFNC1_HOME.tar.md5
I9500XXUEMJ8_I9500OJVEMJ8_I9500XXUEMJ8_HOME.tar.md5
Custom CWM:
CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5
cofface_I9500_cwm_recovery_en_new.tar
philz_touch_6.07.9-i9500.tar.md5
TWRP:
openrecovery-twrp-2.6.3.1-i9500.tar.md5
Odin:
Odin3-v3.07
Odin3v09
Odin3v185
PIT:
adonis.pit
Even latest Samsung driver and Kies is installed.
what I can see in Odin, is the following error (it is valid for all Stock Firmware):
((
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUFNB4_I9500OJVFNC1_I9500XXUFNC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> param.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
))
which it is getting failed in system.img part.
Really appreciate your kind support to state which Firmware I need to use in order to make the phone up again.
P.S: I can see the following info during downloading Mode:
((
PRODUCT NAME: GT-I9500
CURRENT BINARY: Custom
System Status: Custom
KNOX WARRANTY VOID: 1
AP SWREV: A3
))
waiting your kind feedbacks.
thanks and best regards
Barznj
Related
Dears,
I have Samsung Galaxy S4 I9500 with below details:
((
Model: I9500
FCC ID: A3LGTI9500
SSN: I9500GSMH
IMEI: 357357/05/432290/7
IMEI: 357357054322907
S/N: R21D50R0NJH
Country of Origin: Korea
))
But I am located in Iraq and the phone had warranty, but now not
the S4 hanged, and when we took out the battery and put it back, it hanged again, then it went to boot loop.
We tried many Firmware like below, even we tried custom as well:
Official Iraq Firmware:
I9500XXUBMEA_I9500OJVBMEA_I9500XXUBMEA_HOME.tar.md5
I9500XXUFNB4_I9500OJVFNC1_I9500XXUFNC1_HOME.tar.md5
I9500XXUEMJ8_I9500OJVEMJ8_I9500XXUEMJ8_HOME.tar.md5
Custom CWM:
CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5
cofface_I9500_cwm_recovery_en_new.tar
philz_touch_6.07.9-i9500.tar.md5
TWRP:
openrecovery-twrp-2.6.3.1-i9500.tar.md5
Odin:
Odin3-v3.07
Odin3v09
Odin3v185
PIT:
adonis.pit
Even latest Samsung driver and Kies is installed.
what I can see in Odin, is the following error (it is valid for all Stock Firmware):
((
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUFNB4_I9500OJVFNC1_I9500XXUFNC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> param.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
))
which it is getting failed in system.img part.
Really appreciate your kind support to state which Firmware I need to use in order to make the phone up again.
P.S: I can see the following info during downloading Mode:
((
PRODUCT NAME: GT-I9500
CURRENT BINARY: Custom
System Status: Custom
KNOX WARRANTY VOID: 1
AP SWREV: A3
))
waiting your kind feedbacks.
thanks and best regards
Barznj
I tried to install cm on to my rwc sgh-1337m but it failed halfway through the download so i then tried to reflash and older 4.2.2 rom that i know worked on this device before but this time I kept getting fail(auth) in odin (3.07 & 3.09). I tried a different rwc sgh-i337m rom it didn't fail but it got stuck on the samsung splash screen the last time I tried to reflash I checked nand erase all (I read a couple sources that said it might help) but that did nothing. Before I tried to put cm on I had root with kt sgs4 kernel and stock touchwiz. Any suggestions there's still a year contract with rogers on this phone so I obviously don't want to have a bricked phone.
if this helps the roms I tried to flash were:
I337MVLUAMDJ_I337MOYAAMDJ_I337MVLUAMDJ
I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6
I also still have the kernel is not seandroid enforcing and warranty bit kernel in the top left when booting.
Text after flashing the Fail rom:
ODIN MODE
PRODUCT NAME: SGH-I337M
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE: enabled
START[224, 1440]
BAR[240, 1440]
SW REV. CHECK FAIL : fused : 4 , Binary : 3
Odin log for first rom
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> NON-HLOS.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Hi, I have a Samsung Galaxy S3 (GT-i9300) which was working fine until the other day. The phone was plugged into the charger and immediately restarted itself and stuck at the initial loading screen. I could boot into TWRP recovery but was unable to mount any partitions and if I tried a factory reset it reported that there was no OS installed on the phone.
So I decided to reload the factory firmware using Odin. I have downloaded what I beleive to be the correct factory 4.3 firmware (I9300XXUGMK6_I9300OXAGMK6_BTU.zip) but when I try to load it using Odin it fails at around 90% (see screenshot).
The complete message log is as follows:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK6_I9300OXAGMK6_I9300XXUGMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> tz.img
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> modem.bin
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Here is a screenshot of Odin when it fails. One concern I have is that at the top of the screen it sdays 'Odin3 i9505'. Should that not say the model of the connected phone which in my case would be i9300
If anyone could offer some advice I would be gratefull.
Thanks
EDIT: I forgot to mention, since the failed attempt I can no longer boot into recovery but I can still boot into download mode.
Try the rescue firmware with pit, search in general forum.
boomboomer said:
Try the rescue firmware with pit, search in general forum.
Click to expand...
Click to collapse
Thanks for that boomboomer, I'm downloading it now.
What do you think about Odin not displaying my phone model at the top of the screen. Is this something I should be worried about or just ignore it for the moment.
My the same , but select rom forr I9305 bot i9300 and it fail on modem
and i flash i9300 rom and it works perfect
Hello XDA,
I did brick my phone by trying to downgrade to 5.0.2 from 5.1.1 and bricked my phone and searching this forum I felt that there should be a post like this to ease the journey of people like me. As I did learn a lot from my 5 years android journey, I would like help everybody like me. Therefore if I find any important/"you may not know" fixes, I will share here with headings. Also If you have another solutions for any problems of these kind; please write here so I can collect em' all in the OP. Let's go!
-ODIN fail while flashing hidden.img-
Solution: This is caused because of your partition(pit). In XDA, you can find .pit files of S6 Edge for several models (i.e. I have a g925f so i have to find the corresponding pit file. The one worked for me was the G925F pit with Hidden_300M. First you flash this pit to your phone, then try to flash your rom; you're good to go!
Solution 2 Thanks to @Alex-V : Just delete the hidden.img from the rom.
---------------------------------------------------------------
-If you can't properly enter to recovery mode-
Solution: Please do the combo "Volume Down-Home-Power" until you reach download mode. When you reach there again do the same combo until the screen goes off. When it goes off QUICKLY switch to "Volume Up-Home-Power" combo and hold it until the screen comes in and dims a bit. When it dims release all buttons and ta-da you're in recovery mode.
---------------------------------------------------------------
-ODIN gives a fail at NAND write-
Solution: This problem is caused because of the nand mismatches (generally, or build differences etc.). Doing this may cause a hard-brick IF YOU DON'T follow the instructions CAREFULLY.
1) Get your device to download mode by using this combo "VolumeDown-Home-Power"
2) Open an UP TO DATE ODIN.
3) Find the corresponding .PIT file for your S6 EDGE.
4) Find the corresponding stock rom for your S6 EDGE.
5) Then put them into odin CORRECTLY. Rom to "AP", .pit to PIT
6) Make Sure these are checked: "Re-partition","NAND all erase"
7) Plug your device in and then press start.
After these you should be already flashed correctly without any nand write fail.
---------------------------------------------------------------
-SW REV CHECK FAIL DEVICE: 2 BINARY:1-
This happens when you try to downgrade from 5.1.1... Thanks to Samsung, we can not downgrade to repair our phones or save them because of the locked bootloader. So you have to flash to 5.1.1 again.
If anyone with a working rooted phone, can he/she share his/her own nand backup, so people with screwed boots can recover
or simple delete the hidden.img
Added to the post, thanks mate. Also looking for how to fix corrupted sdcard (theres no mmcblk0x file)
Hi,
I'm following your advice to try and overcome my S6 Edge's issue with failing to NAND write but I am still getting the same NAND write fail. I have another post detailing the issue here http://forum.xda-developers.com/showpost.php?p=67930722&postcount=5 if you want more info but I'll just post the Odin log here too just in case you can spot where I went wrong.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925W8VLU1AOCG_G925W8OYA1AOCG_G925W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Erase...
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My device is an S6 Edge G925W8. Thanks.
Please Respond
Malganor said:
Hi,
I'm following your advice to try and overcome my S6 Edge's issue with failing to NAND write but I am still getting the same NAND write fail. I have another post detailing the issue here http://forum.xda-developers.com/showpost.php?p=67930722&postcount=5 if you want more info but I'll just post the Odin log here too just in case you can spot where I went wrong.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925W8VLU1AOCG_G925W8OYA1AOCG_G925W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Erase...
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My device is an S6 Edge G925W8. Thanks.
Click to expand...
Click to collapse
I am also getting the exact same thing. I Put in the pit file like instructed as well as the correct rom... still get the same NAND WRITE START.
Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925W8VLU1AOCG_G925W8OYA1AOCG_G925W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am trying to fix a S6 edge. The problem is that when i boot it up it shows me "an error has occurred while updating the device software"
Odin, newest version, does not see the phone. I have searched around and downloaded the G9250ZTU2COKB_G9250ZZT2COKB_BRI firmware for my SM-G9250 and trying to flash it with Odin 3.10.7
It starts but soon after starting it shows me the following error. Any help please? I have searched and found a thread where it says that i need to remove the hidden image from the file but there is no hidden image in it after extracting the tar file.
TIA
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
try flashing the XEU or BTU firmware.
mikey_sk said:
try flashing the XEU or BTU firmware.
Click to expand...
Click to collapse
DON'T do this ^ - your 9250 is a different hardware variant to the 925F/I/T etc models and if you flash a non-9250 firmware you'll likely end up with a paperweight.
Anyone else with any ideas?