Hello at all guys, I'm desperately trying to install a new recovery to install new rom, I've done maybe a disaster, the phone will not turn on anymore, when I connect it is not detected (with the usual beeping sound on your computer).
I found online a full backup of a MTK6577 (boot.img, preloads, logo, recovery, etc.) I put all these files and made the procedure of flash with the software flash tools, the operation is completed I came out the green circle all that went well, but the phone will not turn on anymore.
The only strange thing is that I can load it with the power supply, this is because I use a cable that makes you see when you are charge(see attached file),this when there is no charging source will turn off automatically.
I have buyed this phone by this store: ([email protected]@[email protected]/snapshot/[email protected]), I tried to apply for a refund, but they are gone (as usual)
I tried to click on the back button (reset), but there is no button on the inside.
I ask for your help desperately, if there is any possibility of recovery in some way, even opening the phone, otherwise they are thrown money.
Many thanks, i hope you help me.
up, please help me
Related
I was trying to install Chainfire 3D and I guess I did something wrong because I'm now stuck in a boot loop.
I have a Proscan PLT9045k tablet rooted. I was running a stock rom and kernel. Whenever I try to boot it up now it just freezes on the Proscan logo, I can't even make it to the Android boot screen.
Can anyone help?
SpaceNigs said:
I was trying to install Chainfire 3D and I guess I did something wrong because I'm now stuck in a boot loop.
I have a Proscan PLT9045k tablet rooted. I was running a stock rom and kernel. Whenever I try to boot it up now it just freezes on the Proscan logo, I can't even make it to the Android boot screen.
Can anyone help?
Click to expand...
Click to collapse
remove the battery, and reinsert , enter recovery mode and wipe all and reboot,
Solved
droidinterest said:
remove the battery, and reinsert , enter recovery mode and wipe all and reboot,
Click to expand...
Click to collapse
if you are able to go to recovery mode in your device just wipe data and cache every thing will be solved and if you are not able to go to recovery mode just install stock rom of your device.......
press thanks if i helped
rahulraz said:
if you are able to go to recovery mode in your device just wipe data and cache every thing will be solved and if you are not able to go to recovery mode just install stock rom of your device.......
press thanks if i helped
Click to expand...
Click to collapse
I've tried that multiple times and I'm still stuck on the boot loop. And looking online I could only find a .img of the firmware for my tablet. It's hard to find any support at all for this model.
how I fixed my proscan tablet
I know this is super old but I hope this helps someone someday,
I bricked a proscan (made by curtis international) tablet, I found the proper firmware on the legacy.curtisint (dot) com/support/manuals.asp?p=15 web page
after unzipping all the contents and the zip file that is in the main folder I connected the tablet to the PC via USB with the power to the tablet off
look for RKbatchtool.exe in the batch tool folder, load the *.img file in the main folder in that program, below there will be many greyed out boxes numbered 1-8 iirc
press and hold the power button on the tablet until you hear the USB insert sound from your computer (the screen will stay black but it has turned on to the firmware loading function)
in the RKbatchtool program one of the greyed out boxes at the bottom should now be green or flashing and allow you to properly reload the firmware
let it run and it will auto complete and tell you when completed.
It doesn't cost the manufacture proscan to keep 'copy' of their old firmware stored at google or their own webserver, it's either they don't care about buyers who have issues with the firmware or software as it has bugs and the device is 'disposable' as they sell it for like $50. It's obviously not worth their time investing money on technical support for a product with so little profit. the company didn't even bother to leave digital copy of their manual or firmware for 'free' downloand and no technical support for their product and customers have to come here for 'free technical support' which is bogus.
these 'cheap' disposable tablets have self destruct mechanism if you reset to factory or try to flash it too many times,,just kidding or crap cheap tablets with technical support cause they want to give any technical support. and don't care as it's disposable. cheap garbage.
technical support is the job of the guy who made the stuff not for sites like this or third party websites.
The problem is the battery is too low to bootup. and there is not enough charge to load the android software. it only has enough battery to boot up stage. and when battery is low it shuts down. Plug the usb charger and fully charge the battery for 5 hours. If your battery was drained to 0% and you have not used it for months, you need to charge the batter for at least 6 hours to fully charge it.
it worked for me. and never use the battery to 0%. and not recharge it. always recharge the battery when it reaches say 10%
there is no need to flash the firmware or even reset it etc.
Hi There, I have a problem that i hope you guys can help me.
Today i was restarting my Phone and by my mistake it fell on the ground and the battery fell out, After this it doesn't even vibrate to start up, I can't perform Hard Reset, Neither go on download mode, I tried to pull it to the PC via USB and it detects it for 1 sec and then it appears as Unknown Device and i can't do anything, TO flash back the rom.
Well i hope any of you can help me, If you need any more information just say, Thanks in Advance.
- Bruno
Edit: I must say that if you plug the phone to the PC it detects but saying Unknown Device and saying that there is no drivers for it, I am unable to Get to download mode or hard reset, Help pls.
I may add that, I need help as soon as posible since i need the phone to work i hope you guys can help me, If you need i can send a video of how it is happening
Problem too
I have a lg L5 II E450F and all screen is black dont display anything I tried with pressing both buttons I searched a lot and the unique solution I tried is pressing the two buttons of volume and connect but in lg support tool told me that all is fine and flashing correctly but my screen don't display or the phone dont vibrate or sound nothing please help me too. I think is something in the display data because I make a back up with piranha box and it works but nothing display or show something or made something still dead please help
BrunoGanzuas said:
Hi There, I have a problem that i hope you guys can help me.
Today i was restarting my Phone and by my mistake it fell on the ground and the battery fell out, After this it doesn't even vibrate to start up, I can't perform Hard Reset, Neither go on download mode, I tried to pull it to the PC via USB and it detects it for 1 sec and then it appears as Unknown Device and i can't do anything, TO flash back the rom.
Well i hope any of you can help me, If you need any more information just say, Thanks in Advance.
- Bruno
Edit: I must say that if you plug the phone to the PC it detects but saying Unknown Device and saying that there is no drivers for it, I am unable to Get to download mode or hard reset, Help pls.
Click to expand...
Click to collapse
lgflashtool
and vcom mtk drivers
get them
select flash files
plug phone first time to setup driver then next time if lgflashtool ready to flash it will attach itself to pc using preloader
Hi, I have the BLU Energy X, and I had flashed some ZIP mods via TWRP. I decided that I didn't want them, and read somewhere that I had to flash my phone using the stock ROM. I used the ROM from NeedRom here: needrom[.com]/ download/ blu-energy-x-e010q which should be the correct one for my phone. It also shows the . I installed proper drivers and flashed using smartphone flash tool. It completed, and I unplugged my phone and pressed the power button. Nothing happened. No combination of power and volume buttons turn this phone on. I have tried flashing again, and I got the error "BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0)". My phone does show up in Device Manager when I plug it in, as USB Serial Device (COM6) under the Ports category. Sometimes it will go in a loop of SHowing up then 3-5 seconds disconnecting from PC, then connecting again. Before I flashed I used the format option because I was getting an error, and that was the fix for it. The flash completed successfully. I did not touch the device while it was flashing, or the USB cable. I'm in grade 8 and I get a really allowance, so I couldn't buy this phone for about 8-10 months again, and I really want to avoid that. I am/was rooted, if that helps. Thanks everyone here in advance, and I really hope you guys know how to fix this! Thanks alot
Helloooo,
I have a big problem, cant get my phone running again.
The sad thing is, I just got it 4 hours ago
So heres what I have done to my Phone:
I rooted it with Kingo-Root and then installed a app where TWRP was listed, there also was CWM and stuff and I thought I have to flash my phone there with TWRP to install a new ROM and stuff and I clicked there on flash.
Then it asked me if I want to restart in, I cant remember recovery and/or download mode, I clicked yes and from there the trouble began.
When it starts the Coolpad Logo appears, then it say "Download and install the package?", to confirm volume up, to abort volume down. If I press abort, it just goes off, the restart may leads to the battery charging screen ( usb cable is always connected!!), if I press volume up, it says "Information - Do not disconnect data cable", but it says it for forever, nothing happens.
If data cable isnt connected, it shows Logo and then goes off, doesnt do anything.
I wish I would have never done that, Im too stupid for stuff like that.
Can someone help me out?
Hopefully
Hi are you able to enter in TWRP recovery in orden to try to flash him back to stock rom ?
Sadly no
I read some stuff on the internet, and tried it:
I installed andoid studio on my PC, with all that drivers, connected the Phone to my PC and looked it up in the device manager.
Before it was just recognized as "Other devices - Android" without any information, now I had the Hardware ID and put that into the setup text of Google drivers and installed them.
My PC somekind recognizes the phone. (but not like normally)
Maybe i can get the Stock Rom to phone that way somehow?
Edit: its called adb interface in device manager
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
bad support.
Paskebe said:
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
Click to expand...
Click to collapse
Bad support for this phone...
My is dead after 20 days .
Paskebe said:
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
Click to expand...
Click to collapse
That is probably because you flash incompatible firmware which does not recognize display of your device .
Search on the internet for another genuine rom and repeat flashing process .
I had alsmost same issue when I flashed Blu Studio D572i with rom of D572a as I remember , was black screan completely but buttons are working (showing light) .
Hello,i got a huawei y6 2017 MYA-L11 model, i unlocked the bootloader and installed twrp, i made a backup of my stock rom and then wiped to install some custom roms.But now my phone is not working, everytime i start the phone it goes only to twrp even when i restore.I see that the backup exist in internal storage (contains system,data and boot) and says the restore was successful but the device boots always in twrp menu.Please help.
Any help guys?It doesnt seem so difficult problem for the level of this forum.
Try resetting the phone by pressing up volume button when on warning screen to get to erecovery. Use the option to shut down phone. Then try starting the phone again after a minute or two.
BTW what rom were you trying to install?
I tried every possible combination in the warning screen the only place i can go is twrp.I tried to install aokp,lineage 14.1, slim7, xeonHD nothing worked.
Where did you get those roms, I don't think they are for the y6 2017!
Anyway try pressing and holding the volume up button when at warning screen until the phone turns off. It will come back on and go to erecovery after the warning screen.
If that doesn't help then get SPFlashtool and stock rom and flash it.
I didnt know that y6 and y6 2017 was different.When i hold volume up the warning screen keeps repeating like forever and the phone doesnt go off.
Do i need spflashtool,can i do it from twrp install?
Anyway thanks for the help,it seems this phone cant take any custom roms,i should had bought a sumsung,can you suggest me some brands/devices that can be easily rooted/twrped with much custom roms in low range price.
We all make mistakes.
You will be able to fix it with the spflashtool if you download the rom.
Just have a look on here for an alternate device, I wouldn't know off hand which would be a good buy.
Tip: Read, read and then read some more before attempting anything with your phone!
Problem, the phone cant stay off when the usb is connected to the pc or electricity,when i press power off it reboots to warning screen and twrp,if it is closed when i plug the usb it starts into twrp all the time.
When i put the scatter file and press download this error appears
ERROR:S_COM_PORT_OPEN_FAIL(1013)
[COM]Failed to open COM port.
I m on linux
Use this tut to set up for linux.
You will just have to time plugging in the usb cable., I managed it so I know it can be done!