Hi everyone,
I'm having a great problem. Recently got rooted SIII with CF-CWM and ICS Rom. I tried to install recent update of official 4.3 announced for UK (BTU) downloaded from SamMobile.
I used ODIN 3.7 for this process. All went successfully. ODIN automatically did a factory reset but after reset phone is on Samsung logo. Logo and LED light are blinking but not going any further. And I'm unable to go into recovery as well.
Please someone help me out in this matter. I searched here but found nothing relevant. And by the way I'm in Pakistan.
Here is the log of ODIN:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMJ9_I9300OXAGMJ9_I9300XXUGMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Odin does not do factory reset, boot into recovery and do it again.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Odin does not do factory reset, boot into recovery and do it again.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
thanks a lot brother
my problem is resolved.
please tell me how can I close this thread now?
How to root?
one more things.
Please guide me will the CF-Auto Root for SIII v6.4 by ChainFire work with 4.3 stock rom or not?
Check out CF's thread, I'm sure it will.
CF's Thread?
boomboomer said:
Check out CF's thread, I'm sure it will.
Click to expand...
Click to collapse
Would you like to tell me which one is CF's thread? any link for that?
faakher said:
Would you like to tell me which one is CF's thread? any link for that?
Click to expand...
Click to collapse
In development or found via the faqs and guides .
Related
Coming from LiquidSmooth 2.9
Ran triangleaway, then went into download mode, and flashed
KIES_HOME_I9300XXEMG4_I9300OXAEMG4_1314436_REV00_user_low_ship.tar.md5
Odin reported:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXEMG4_I9300OXAEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> sboot.bin
<ID:0/003> tz.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
Click to expand...
Click to collapse
Phone rebooted and now I'm just getting the Samsung logo continuously..
Power on, swirly logo, SAMSUNG, swirly logo, SAMSUNG etc..
Help Please.
How do I get this back to stock ?
Thanks
Basic faqs and guides .
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
Probable fail to wipe phone .
Factory reset flash rom again
JJEgan said:
Basic faqs and guides .
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
Probable fail to wipe phone .
Factory reset flash rom again
Click to expand...
Click to collapse
Thanks
Obviously should have read this before I started.
Can you advise the best way forward now. ?
Do I try again using Odin and the same file ?
Thanks
Probably should mention I was following this guide:
[Tut] Unroot the Galaxy SIII (for stock updates/warranty)
I would try flashing recovery and then wiping the phone .
JJEgan said:
I would try flashing recovery and then wiping the phone .
Click to expand...
Click to collapse
I managed to get into recovery and that told me it applied BTU.
I've cleared the data/factory reset and cache.
Phone has rebooted and now it appears to have loaded
Thanks
Phone was never rooted it was my mom's phone and she decided to update to 4.3 today and well now it's stuck on note 2 splash screen. I can't enter recovery I can only enter download mode.
So I downloaded 4.3 Odin file and flashed it and it passes that and reboots but still gets stuck. I also tried flashing that pit file with Odin and it's still stuck.
Is there any other way to fix this or am I gonna have to bring it in to Verizon and have to pay to fix it?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Phone was never rooted it was my mom's phone and she decided to update to 4.3 today and well now it's stuck on note 2 splash screen. I can't enter recovery I can only enter download mode.
So I downloaded 4.3 Odin file and flashed it and it passes that and reboots but still gets stuck. I also tried flashing that pit file with Odin and it's still stuck.
Is there any other way to fix this or am I gonna have to bring it in to Verizon and have to pay to fix it?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Now that it flashed in Odin successfully can you get into the stock recovery? Sounds like you need to do a factory reset if you can get into recovery.. If not take that piece into Verizon they will give her a new phone
Sent from my SCH-I605 using xda app-developers app
Fixed it, I had to odin my s3 back to stock in order to get that verizon upgrade assistant program to install and I connected note 2 in odin mode and did a repair device which basically wiped it for me and its working again ^_^
RedRumy3 said:
Phone was never rooted it was my mom's phone and she decided to update to 4.3 today and well now it's stuck on note 2 splash screen. I can't enter recovery I can only enter download mode.
So I downloaded 4.3 Odin file and flashed it and it passes that and reboots but still gets stuck. I also tried flashing that pit file with Odin and it's still stuck.
Is there any other way to fix this or am I gonna have to bring it in to Verizon and have to pay to fix it?
Click to expand...
Click to collapse
The real question is are all your buttons working properly? if you are in odin mode and done a flash, you now have to go into recovery mode and wipe out other things from the previous update so you are not stuck,
So I have this message on the screen "firmware upgrade encountered an issue. please select recovery mode in kies & try again".
I have tried installing alot of new firmware, but it doesn't help. Everytime I'm installing a new firmware it just goes to <ID:0/003> factoryfs.img
<ID:0/003> FAIL!
Someone please help me fix my phone?
LOG:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> factoryfs.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Hi there,
Where are you downloading the firmware files from? Is it from a reliable source? Did your phone have enough power to complete the flash? What about a different computer?
Regards, gsstudios
gsstudios said:
Hi there,
Where are you downloading the firmware files from? Is it from a reliable source? Did your phone have enough power to complete the flash? What about a different computer?
Regards, gsstudios
Click to expand...
Click to collapse
Thanks for you reply, I am downloading the files from sammobile.com and I charged my phones battery before I did it.
mixtape45 said:
Thanks for you reply, I am downloading the files from sammobile.com and I charged my phones battery before I did it.
Click to expand...
Click to collapse
Try an Older Version of 'ODIN' and see, Sometimes the latest version do pose Issues for u
I always use ODIN ver 1.85 as it has never failed for me so far
Sun90 said:
Try an Older Version of 'ODIN' and see, Sometimes the latest version do pose Issues for u
I always use ODIN ver 1.85 as it has never failed for me so far
Click to expand...
Click to collapse
I have tried using that version, and I have tried using the latest version of odin.
mixtape45 said:
Thanks for you reply, I am downloading the files from sammobile.com and I charged my phones battery before I did it.
Click to expand...
Click to collapse
Have you followed this guide before posting on XDA: http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Regards, gsstudios
I did try that guide, and I got past the usual factoryfs.img but my phones battery discharged, and when I charged it, I still get FAIL at factoryfs.img
Will flashing a firmware with odin delete data?
Sent from my SM-G925F using Tapatalk
KingUsman said:
Will flashing a firmware with odin delete data?
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
Always back up your data
Always assume flashing anything will delete your data.
If you are talking about the 6.0.1 firmware, nope it didn´t delete any of my data. Like always, search before opening a new thread.
Kirkland301 said:
Always assume flashing anything will delete your data.
Click to expand...
Click to collapse
i have problem with hidden.img on uk 6.0.1 firmware. odin says failed when I try to flash this file.
here is the log:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT: sorry, i found the solution on this thread: http://forum.xda-developers.com/galaxy-s6-edge/help/odin-fail-hidden-img-t3154903.
thanks
my s3(i9305) is stuck in download mode with stock recovery on it and ive got odin, but i cant get any stock roms booted on it, cant get onto the phone, and it dont have any working firmware on it...i just want to put it back to stock asap and get the dam thing working again.
any help would be great!!
What output are you getting in odin?
Beamed in by telepathy.
shivadow said:
What output are you getting in odin?
Beamed in by telepathy.
Click to expand...
Click to collapse
the bar is blue
No, there is a 'window' on the bottom left of the app with text in it. What does that text say when you've attempted to flash the phone?. Need all of it, not just the result at the end.
The blue bar means the flash completed successfully but doesn't give any more info than that.
Beamed in by telepathy.
shivadow said:
No, there is a 'window' on the bottom left of the app with text in it. What does that text say when you've attempted to flash the phone?. Need all of it, not just the result at the end.
Beamed in by telepathy.
Click to expand...
Click to collapse
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGPE1_I9300AMNGPF1_I9300BVUGNB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Sboot.bin is the bootloader so I presume that it is either locked or corrupt. I'm not sure if that is a pit error or not. You could try to find another file and hope it works but if you're absolutely sure the one you have is good then there's no point. You could try finding a stock rom that doesn't include the bootloader. Also flashing a pit file (only as a very last step) is an option but make sure it is the correct one for your specific model and region etc.
I hate recommending pit file flashing but in this case it could be viable from other reports around the site. Flashing a pit file is a last resort only, I cannot stress this enough.
Beamed in by telepathy.
shivadow said:
Sboot.bin is the bootloader so I presume that it is either locked or corrupt. I'm not sure if that is a pit error or not. You could try to find another file and hope it works but if you're absolutely sure the one you have is good then there's no point. You could try finding a stock rom that doesn't include the bootloader. Also flashing a pit file (only as a very last step) is an option but make sure it is the correct one for your specific model and region etc.
I hate recommending pit file flashing but in this case it could be viable from other reports around the site. Flashing a pit file is a last resort only, I cannot stress this enough.
Beamed in by telepathy.
Click to expand...
Click to collapse
where might i find a stock rom without a bootloader? dont fancy the pit file tbh!!
Try using different USB cables and USB 2.0 ports.
audit13 said:
Try using different USB cables and USB 2.0 ports.
Click to expand...
Click to collapse
ive only got the 1 usb port on my tablet
The sboot.bin is not flashing because the bootloader on the phone is newer than the bootloader in the ROM you are flashing, the ROM is not for your phone, and/or you need to try another computer.
It's unlikely that the bootloader is locked as AT&T and Verizon are the only two carriers I know of who lock down the bootloader.
i'm totally out of my knowledge zone here....i did do thison 1 of my old phones a few years back and some one wrote on a comment exactly how to make it stock again....but i'm buggered if i can find that post again....or thats even if the site still has that thread...can anyone point me in the right direction here please?
Ok this is what i get when i try and flash this:I9300XXUGNB5_I9300EVRGML2_EVR
which i got from sam pass and selected my exact model of phone from my country(uk) and the network i'm using....with odin v3.10
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB5_I9300EVRGML2_I9300BVUGNB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can someone please tell me what i'm doing wrong??
so this is what i'm getting when i'm using odin v3.10 trying to install the correct firmware for my phone from sam pas and selecting the country/network
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB5_I9300EVRGML2_I9300BVUGNB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can someone please point me in the right direction??
Your original post says the phone is a 9305 and you are flashing a 9300 ROM?
yea i'm trying to download I9305XXUFOC1 now but every site i go to its giving me a 5 hour wait time.....is there a faster way i can get it downloaded?
audit13 said:
Your original post says the phone is a 9305 and you are flashing a 9300 ROM?
Click to expand...
Click to collapse
Well spotted, didn't even occur to me..
Beamed in by telepathy.
In use sammobile.com. The download speed for free accounts is not great but I usually start the download and do something else for a while.