[Q] Turning off when idle - Galaxy S III Q&A, Help & Troubleshooting

Just upgraded to CM 11 and now if I leave my phone idle, it just randomly turns itself off, any suggestions to whats causing this/how to fix it?

EonBlueApocalypse said:
Just upgraded to CM 11 and now if I leave my phone idle, it just randomly turns itself off, any suggestions to whats causing this/how to fix it?
Click to expand...
Click to collapse
Which CM11?
Are you using the stock kernel?

tomosh22 said:
Which CM11?
Are you using the stock kernel?
Click to expand...
Click to collapse
The latest official version! And I would assume so, I haven't intentionally messed around with kernels!

EonBlueApocalypse said:
The latest official version! And I would assume so, I haven't intentionally messed around with kernels!
Click to expand...
Click to collapse
there is no official CM11 for S3. as the custom rom is still under development, bugs are expected. though, try a clean wipe and then flash the rom again. goodluck

sriram231092 said:
there is no official CM11 for S3. as the custom rom is still under development, bugs are expected. though, try a clean wipe and then flash the rom again. goodluck
Click to expand...
Click to collapse
http://www.ubergizmo.com/2013/12/cyanogenmod-11-android-4-4-nightly-builds-being-rolled-out/ just been released! But will do!

Anyone got anymore ideas? I still haven't fixed this problem...

Had that on CM11 after dirty flash. Clean flash with /system format, dalvik wipe, cache wipe and factory reset solved it.
Good luck.

Related

[HELP] GT-I9300 doesn't boot in stock

First of all i apologize if i don't post this thread in the right place and if there's already a thread about this but i looked a lot and found nothing.
My problem is that i cant make my phone boot in stock rom ics.
I tried with lots of stock roms, not just from my country, but also from anothers, but i can use JB rom (from Poland right now, in omega rom) without any problem.
The phone is stuck at bootloader, and if i wipe data/factory reset, it get's stuck in the language selection screen and if i touch it, anything happens.
Also i tried to flash roms like cyanogenmod and aosp rom and they just stay on bootloader and nothings happen if i wipe everything.
I appreciate if someone helps me and sorry for my bad english.
prinnyvaca said:
First of all i apologize if i don't post this thread in the right place and if there's already a thread about this but i looked a lot and found nothing.
My problem is that i cant make my phone boot in stock rom ics.
I tried with lots of stock roms, not just from my country, but also from anothers, but i can use JB rom (from Poland right now, in omega rom) without any problem.
The phone is stuck at bootloader, and if i wipe data/factory reset, it get's stuck in the language selection screen and if i touch it, anything happens.
Also i tried to flash roms like cyanogenmod and aosp rom and they just stay on bootloader and nothings happen if i wipe everything.
I appreciate if someone helps me and sorry for my bad english.
Click to expand...
Click to collapse
How are you flashing the ROMs?
Kangburra said:
How are you flashing the ROMs?
Click to expand...
Click to collapse
From Odin3 in download mode and the problem is only on ics roms and i just noticed that is also on ics nandroid backups
prinnyvaca said:
From Odin3 in download mode and the problem is only on ics roms and i just noticed that is also on ics nandroid backups
Click to expand...
Click to collapse
I don't know, but if JB are OK I would not worry, just stay with a JB ROM.
Do a factory reset after the flash
Kangburra said:
I don't know, but if JB are OK I would not worry, just stay with a JB ROM.
Click to expand...
Click to collapse
I actualy loved JB, but the main reason is because that i can't test any rom other than Omega (they just get stuck on the bootloader and i read it may be because my JB stock rom) and the other reason is because that's a very weird bug, and i'm very curious about it
prinnyvaca said:
I actualy loved JB, but the main reason is because that i can't test any rom other than Omega (they just get stuck on the bootloader and i read it may be because my JB stock rom) and the other reason is because that's a very weird bug, and i'm very curious about it
Click to expand...
Click to collapse
Can you flash a JB stock ROM?
Kangburra said:
Can you flash a JB stock ROM?
Click to expand...
Click to collapse
I just tried with only one(XXDLIB) and no problem (tomorrow i will try with some others to know if it's only the rom or any JB)
slaphead20 said:
Do a factory reset after the flash
Click to expand...
Click to collapse
I did a factory reset before and after the flash and it's still the same. Do i have to format the complete sdcard? including the pictures and the music and all that stuff?
prinnyvaca said:
I just tried with only one(XXDLIB) and no problem (tomorrow i will try with some others to know if it's only the rom or any JB)
I did a factory reset before and after the flash and it's still the same. Do i have to format the complete sdcard? including the pictures and the music and all that stuff?
Click to expand...
Click to collapse
no, but always worth a try, but backup first
I just solve it and its weird. I had to do a full reset with stock recovery and then I can boot in stock rom and even use rom's like cyamogenmod or aosp.
I don't know what was the problem but now is solved
Thanks a lot to all for your help
Enviado desde mi GT-I9300 usando una tostadora

[Q] Constant reboots

Hi i have been flashing few roms for my xperia mini. But everytime i flashed one with different kernels I met the same problem. The device reboots itself constantly and battery drains a lot. How am I suppose to do to fix this?
messipepsi said:
Hi i have been flashing few roms for my xperia mini. But everytime i flashed one with different kernels I met the same problem. The device reboots itself constantly and battery drains a lot. How am I suppose to do to fix this?
Click to expand...
Click to collapse
Try to wipe data, cache and dalvik cache. Reboot.
Note: do have backup first.
Disturbed™ said:
Try to wipe data, cache and dalvik cache. Reboot.
Note: do have backup first.
Click to expand...
Click to collapse
Thanks for your fast reply, but I did those in every installation full wipe for all. But the problems remain.
What about the stock rom with stock kernel (just flash the stock .ftf)? If the problem is on stock rom/kernel too I guess it's a hardware defect
Sent from my SK17i running stock ics (.587)
mihahn said:
What about the stock rom with stock kernel (just flash the stock .ftf)? If the problem is on stock rom/kernel too I guess it's a hardware defect
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
Yeah, tried stock rom with stock kernel, still not working Any idea which hardware that probably causes this? Maybe the battery?

HELP! Wifi problem Custom ROM

So today i flashed different kernels, AOKP Roms and CM10.1 ROM, and They all couldnt connect to my wifi. I had the autification error or something like that. PLEASE HELP. Its definitly not my wifi itself.
Greetings
Had the samething. Maybe dis will help you
http://forum.xda-developers.com/showthread.php?t=2296419
My is on his way 2 samsung.
Did you wipe between the rom flashes?
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
Did you wipe between the rom flashes?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Wiped data, cache, dalvik, batteriy stats......even fixed permissions.... It's very weird cuz its only on a Custom ROM..... On stock wifi is working fine....
Perhaps a kernel related problem?
Did you do a full wipe?
Okay here's exactly what i did....
-I was running Samsungs 4.2.2 leak.
-Wiped data and cache and dalvik and battery stats.
-I installed AOKP.
- I installed GAPPS 4.2.2
- Came in the setup screen and said the wifi problem....
then I did the same with CM.....
pottemans said:
Okay here's exactly what i did....
-I was running Samsungs 4.2.2 leak.
-Wiped data and cache and dalvik and battery stats.
-I installed AOKP.
- I installed GAPPS 4.2.2
- Came in the setup screen and said the wifi problem....
then I did the same with CM.....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2245408
If its just with AOKP aosp cm10 then this should help
neilster2020 said:
http://forum.xda-developers.com/showthread.php?t=2245408
If its just with AOKP aosp cm10 then this should help
Click to expand...
Click to collapse
Well, thank you??????
Know I can't even turn on WIFI!!!!! I Can't switch the toggle...... what now??
pottemans said:
Well, thank you??????
Know I can't even turn on WIFI!!!!! I Can't switch the toggle...... what now??
Click to expand...
Click to collapse
Use folder from newer semi ROM this folder is flashed each time you flash a ROM so you can always flash back to the one that was working before
http://forum.xda-developers.com/showthread.php?p=40737157#post40737157
read second to last post

[Q] random reboots with any CM10

Hi @ all.
I`m flashing a lot of roms and testing every rom from this page.
But any CM 10 rom doesn`t work.
Everytime i get random reboots. Sometimes i get bootloop, somtimes the phone boots normaly but reboots at installation of GM Account.
Sometimes it runs 1-2 Minutes.
There is no way to fix this problem by myselfe.
Any other rom like GB, cm7 works great.
I make full wipe before flashing. I tested wiping after flashing and so on... NO WAY.
Someone has any Tip for me how to get to run?
THX for you posts. Greetings
(I come from Germany so its a German Atrix i think!?)
Scootsch said:
Hi @ all.
I`m flashing a lot of roms and testing every rom from this page.
But any CM 10 rom doesn`t work.
Everytime i get random reboots. Sometimes i get bootloop, somtimes the phone boots normaly but reboots at installation of GM Account.
Sometimes it runs 1-2 Minutes.
There is no way to fix this problem by myselfe.
Any other rom like GB, cm7 works great.
I make full wipe before flashing. I tested wiping after flashing and so on... NO WAY.
Someone has any Tip for me how to get to run?
THX for you posts. Greetings
(I come from Germany so its a German Atrix i think!?)
Click to expand...
Click to collapse
Which kernel are you using? Are you wiping everything down and installing the right way?
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Which kernel are you using? Are you wiping everything down and installing the right way?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
I think i do all right. I´m useing TeamWin Recovery 2.6 and wipe Dalvik, Cache and Data (Factory reset)
I`ve tested to wipe Dalvik, Cache, Data and System too.
I wanted to flash Mokee Open Souce or Epinters 10.1. They have the 3.1.10 Kernel right now.
In other Roms i take the Faux Kernels (GB or CM7) without any Problems.
Scootsch said:
I think i do all right. I´m useing TeamWin Recovery 2.6 and wipe Dalvik, Cache and Data (Factory reset)
I`ve tested to wipe Dalvik, Cache, Data and System too.
I wanted to flash Mokee Open Souce or Epinters 10.1. They have the 3.1.10 Kernel right now.
In other Roms i take the Faux Kernels (GB or CM7) without any Problems.
Click to expand...
Click to collapse
Wipe system, data, cache, osh, dalvik cache.
You said you wanted to use CM10. CM10 is not the same as CM10.1, which is what you just identified in your last post.
You may need to change the recovery you're using. Some ppl see issues with that.
Sent from my MB860 using xda app-developers app
I have change my recovery and wiped osh too.
And it works for two houres. But my whatsapp can' t verify my number.
so i made a reboot and after that the problem is back again.
(Mokee open source)
Will test epinters 4.2 and report here.
But thanks for your help!!!
Scootsch said:
I have change my recovery and wiped osh too.
And it works for two houres. But my whatsapp can' t verify my number.
so i made a reboot and after that the problem is back again.
(Mokee open source)
Will test epinters 4.2 and report here.
But thanks for your help!!!
Click to expand...
Click to collapse
what rom and kernel were you using?
Sent from my MB860 using xda app-developers app
It is the MK 42.2 RC5 with the 3.1.10 Kernel. May be the kernel isn't the original or tweaked. I don't know.
Scootsch said:
It is the MK 42.2 RC5 with the 3.1.10 Kernel. May be the kernel isn't the original or tweaked. I don't know.
Click to expand...
Click to collapse
its original. Thats not the 1.2GHz kernel. It could be a kernel/rom issue. It does happen. Vine or viber had an issue a bit ago with the kernel/rom configuration. Could be whats happening with you.
Sent from my MB860 using xda app-developers app
**** happens. Life goes on
I will try it again or try another rom.
The tip with the osh wipe helped me very much!
Thx & greetings
don't know why but there is no chance to install any 4.x rom.
Have tested smart light 10.1 and epinters 10.1.
Installation works and the system runs for a wile.
But after some time it reboots and gets bootloop.
Maybe the 3.1.10 kernel isn't compatible with my device!?
I'll test the 4.1.2 from epinter and the cm9 from kystianp.
the CM9 with the 3.1.10 Kernel runs since 5 hours perfekt. No reboots or something else!
The Epinter CM 10 i've tested a little bit works too, but it has old kernel bevore 3.1.10.
Since anything beyond 4.0 is based off epinter's work, they all share the same bugs.. if epinter's rebooting, all of them.will do
Enviado desde mi MB860
i think i'll use GB roms for the next time. They are stable and all i need is working.
Maybe there will come new 4.x Roms that will run on my device like a GB rom.
Thank you all for your posts and have fun by XDA Dev. It's the Best Smartphone Forum ever!
Greetings, SCOOTSCH
Remove SD card and try.
Feche said:
Remove SD card and try.
Click to expand...
Click to collapse
Will test this, thanks

[Q] over heating after rom flashed

I´ve flashed S4 Revolution v6 rom with no problems at all.
After going on a tour my i9300 reached 43º. I thought it was just me getting excited but it still happens.
I´m using titanium backup and removed all apps I didn´t want but didn´t improve.
After idle it´s ok but as I start using net or a few multitasks.... 43º again
Also, I´ve deleted cache, dalvik and factory as well and flashed again with no luck.
On another note, on previous S4 Revolution v5 it was fine.
Any ideas please???
Wipe phone flash stock rom and test and or read the rom thread .
rromao1 said:
I´ve flashed S4 Revolution v6 rom with no problems at all.
After going on a tour my i9300 reached 43º. I thought it was just me getting excited but it still happens.
I´m using titanium backup and removed all apps I didn´t want but didn´t improve.
After idle it´s ok but as I start using net or a few multitasks.... 43º again
Also, I´ve deleted cache, dalvik and factory as well and flashed again with no luck.
On another note, on previous S4 Revolution v5 it was fine.
Any ideas please???
Click to expand...
Click to collapse
any way that is based on a leaked rom and hence bugs are expected. tweak according to your requirements. else mega wipe and flash the rom again.
JJEgan said:
Wipe phone flash stock rom and test and or read the rom thread .
Click to expand...
Click to collapse
I did that and temperature stays ok
sriram231092 said:
any way that is based on a leaked rom and hence bugs are expected. tweak according to your requirements. else mega wipe and flash the rom again.
Click to expand...
Click to collapse
did that as well but same happens.
funny enough I had version 5 for some time and worked fine.
Heating can sometimes be caused by the kernel.Wipe cache partition and flash a custom kernel.
cooza said:
Heating can sometimes be caused by the kernel.Wipe cache partition and flash a custom kernel.
Click to expand...
Click to collapse
there is no cutom kernel for the leaked f/w buddy
sriram231092 said:
there is no cutom kernel for the leaked f/w buddy
Click to expand...
Click to collapse
Yeah I just saw that. My bad. I guess he could always reflash the rom kernel incase its corrupt.
reinstalled rom after complete wipe and it´s working fine.
thanks

Categories

Resources