Has anybody found a good car dock for this? I've been using this one http://amzn.com/B0089VO7HE which I like quite a lot, but the charge port is obscured by those rests at the bottom. Also I think the One max is a bit too heavy for it, as it slowly angles down with time.
Anybody find a good car dock that works well with the One max? Most I find are either really bulky, with a bunch of adjustable joints, or would cover up the charge port or buttons on the side. Verizon's website says this http://www.verizonwireless.com/accessories/windshield-mount fits it, but I was curious if anybody had found any others before I went ahead and bought this. All the reviews say this one seems to bounce around quite a lot as you drive.
I had a Ibolt with my note 2 and it worked great; no bouncing or shifting.
Dont know if they have one for the max yet, but here is what it looks like. You can email or call them and see though..
http://www.amazon.com/iBolt-Vehicle...qid=1386777299&sr=1-3&keywords=ibolt+car+dock
wase4711 said:
I had a Ibolt with my note 2 and it worked great; no bouncing or shifting.
Dont know if they have one for the max yet, but here is what it looks like. You can email or call them and see though..
http://www.amazon.com/iBolt-Vehicle...qid=1386777299&sr=1-3&keywords=ibolt+car+dock
Click to expand...
Click to collapse
That looks pretty sweet. Looking at the one for the Galaxy S3/S4/Note 2/Note3 (http://amzn.com/B00AOCSFYC) it looks like it might work fine for the One max. You'd have to face the phone the other way so the top mount wasn't touching the power/volume buttons, but that shouldn't be a big deal.
they have a website and an 800 number you can call and ask about it
http://www.ibolt.co/ibxh-33602
HTC is coming out with the Car Dock soon.
510jungleboy said:
HTC is coming out with the Car Dock soon.
Click to expand...
Click to collapse
http://www.mobicity.com/htc-one-max-car-kit.html#.UrIVOvRDtSc
Mine just shipped out today from here.
nice, but a bit pricey at 66 bucks....
Trooper Thorn said:
That looks pretty sweet. Looking at the one for the Galaxy S3/S4/Note 2/Note3 (http://amzn.com/B00AOCSFYC) it looks like it might work fine for the One max. You'd have to face the phone the other way so the top mount wasn't touching the power/volume buttons, but that shouldn't be a big deal.
Click to expand...
Click to collapse
might want to be careful with getting one designed for samsung devices since they have a tendency to flip the usb port
i use the same one i used with my dna, which looks to be the same general design. and all i do is slide the phone over a little so the top brace doesnt sit on the power button
http://www.amazon.com/iBOLT-xProDock-Kit-for-HTC/dp/B00AOCUP6S
FWIW I just kept my Samsung dock (http://amzn.com/B0089VO7HE) and broke off the bottom right support, which was blocking the USB charge port on the One max. It doesn't look as good, but I melted the plastic with a lighter to remove most of the rough edges, so at least it's now functional, and can handle my DNA or my One max.
I sold my dock for my note 2 on Ebay when I got this phone..
wondering if there are any other car dock options out there, reasonably priced..
thanks!
wase4711 said:
nice, but a bit pricey at 66 bucks....
Click to expand...
Click to collapse
But can you put the phone in the HTC dock while the case is on it? I have this case http://www.amazon.com/gp/product/B00G1PI73K/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1
I ordered this dock a few days ago; less than 1/2 the price, and it looks like it will fit with a case on the phone, as long as its 3.4 inches or less in total width..
Do people not have many tried and trusted docks they use? I'm using a universal tablet phablet car holder which is rubbish. It was fine back when I had a iPad mini. And my Xperia ZU because they had bigger bezels around screen but with this the 3 hooks take up a cm on phone plus its off centre as hooks would touch power button and vol. Do people have solutions. I have a HTC flip case at present and will most likely get a power flip case. But want a holder to allow for that.
Sent from my HTC One max using Tapatalk
I got this Proclip Extra Large Adjustable and hopefully won't have to get another even if my next phone is slightly bigger. It fits my One Max nicely with a TPU case and some room for growth. It says Note 2 and 3 which just means it's big. The phone slides in/out easily and has a little room in the back for air flow. No problem plugging/unplugging the charger.
The seller Crogs571 has been around these forums for a while and I've bought a couple other things from him.
I've got the HTC dock, it's nice but does not support any case on your phone so that kills it for many people
Sent from my HTC0P3P7 using XDA Premium 4 mobile app
I made my own dock with an old gps support and the belt otterbox defender support ...
Related
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
nice find. please let us know how it works. i have a vzw tp2 as well and have been searching for a car holder. right now it sets on my passanger seat...
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
YodaJM said:
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
Click to expand...
Click to collapse
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Techitrucker said:
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Click to expand...
Click to collapse
Thanks for the response, very good reasons not to go with a giant squeeze cradle.
I've been looking at this mount http://www.arkon.com/phonemount.php
Curious if anyone else has used it with the TP2.
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
I have an old Treo 650 Pro-clip mount that works perfectly with the TP2. The phone slides in securely and comes out easily. Obviously no active connection but it works great. I put double sided tape in the back of the of the mount and it holds my Fuze perfectly as well.
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
MrGoodCat said:
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
Click to expand...
Click to collapse
Just came in the mail on Saturday. The cheap shipping took one week to the day. Quality of the cradle is very good. The clip at the top is actually spring loaded, not just plastic that bends back, like the Seidio holsters. It is removable if you won't need to use the cradle in landscape to make it easier to take in and out. The cut out at the bottom is definitely for the CDMA phones. It should work with the European versions also. THIS CRADLE WILL NOT WORK ON THE T-MOBILE VERSION AT ALL. It is a perfect fit for my Verizon phone. This is not a cradle you want if you need to use the keyboard while it is in. For me that is not and issue and it makes me uncomfortable having plastic wedged between my keyboard and screen anyways. Seems like it would be hard on the slider. The windshield mount is very nice. It has push button friction locks instead of screws for the joints and the rotation is spring loaded so its easy to rotate when needed one handed. The suction cup is very large and has a good positive locking mechanism. It is larger than the average suction cup so if you need a dash disk like I do, you will need the largest one you can find. Unfortunately it does not come with one. Since they are selling this so inexpensively, that probably a place they needed to cut their losses. The quality of the cradle is much higher than the price. The cradle does not use a standard mechanism to join it to the mount so you will either have to use the one it came with or go to the website and see if they have another kind of mounting solution. This is really the only limitation I can find. You will not be able to use it with your Proclip solution if you have one. Any more questions you have, just leave them in this forum.
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
treo...not! said:
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
Click to expand...
Click to collapse
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
cincy1020 said:
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
Click to expand...
Click to collapse
check automotive section
MrGoodCat said:
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
Click to expand...
Click to collapse
I had one for my Touch Pro and it was nice enough but it kind of made the gap between the keyboard and phone wider over time. If you absolutely have to have the keyboard open while driving its probably the best on on the market, though to me that keyboard open is just and invitation to disaster. Its hard enough to keep hands off the phone while closed They are not inexpensive by any means. Depending on how you need to configure it you can easily spend well over a $100 bucks. The powered cradle alone without a car specific mount is $60 which is competitive with other powered solutions, but the non powered ones at $40 bucks seem more than a little like highway robbery to me especially since you will still spend $30+ on the mounting solution for the cradle. Still, if you need that keyboard open its the only decent solution at this time. They have no powered option for Verizon yet, but the non powered one they have listed for the AT&T Tilt 2 will work on Verizon and Sprint. The phones are exactly the same shape as the AT&T phone except for the ports on the bottom. If you want a fitted cradle but don't need the keyboard to open while mounted, this is the posted cradle only real solution I've found, but its inexpensive and good quality.
Now if you want the best of both worlds, I was wrong about the Proclip mounts not working with the cradle. They make absolutely the best mounting solution hands down since there is no damage to the vehicle. They have cradle adapters on the site that will make it work and the price is not to bad.
http://www.proclipusa.com/?sectionp...egoryid=&p_year=&p_countryid=0&p_leftorright=
The suction cup on the cradle is 3.25 inches and this adapter is 3.5 inches so it should work.
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Nice find
RemE said:
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Click to expand...
Click to collapse
Nice find on the holster. Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. I find that taping a small vanity mirror to the dash works much better than those little round plastic disks since they where designed to stick to glass. If you have two phones and two holders like I do, the small rectangular one they sell in the automotive department at Walmart will hold both and its only 2 bucks and looks nice. I am not a fan of any kind of vent clip. The two worst enemies of electronics are heat and cold and something as heavy as a PDA is going to break the vent eventually. What I have done in the past is use something like this: http://theclip.com/store/The-Clip-Mount-p-16156.html with a holster or case.
I'm going to get the holster. Been looking for one that faces out like that.
I already have a clip in the car so won't need to take my mount with me when I get off the road.
Techitrucker said:
Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. .... If you have two phones and two holders like I do......
Click to expand...
Click to collapse
Driving a semi, using not one cell phone, but two???
You're probably a great driver. But I'm glad there are several states between you and I.
Techitrucker said:
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
Click to expand...
Click to collapse
tons of this stuff on ebay - pick a random one at 10-12 bucks with free shipping and if it doesnt work out too great its no big loss
Anyone know if this will work for the Tilt 2??
http://cgi.ebay.co.uk/ws/eBayISAPI....5&ssPageName=ADME:X:RTQ:GB:1123#ht_4013wt_939
Thats exactly what im looking for but thats the only thing that comes close. I want a sturdy vent mount that can rotate to landscape mode
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
NOT TRUE.
Just spoke with porclip.
The t-mobile version has not been developed and they do not expect it to be manufactured soon.
mpr_ger said:
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
Click to expand...
Click to collapse
I love the look of the red / black and white/black Seidio Active, but I've read that it's not grippy.. so that if I put it on the car dash and take a turn, it might be sliding all over.. It's a minor point, but important to me.. I don't drive enough to buy a car dock, so I'm skipping that option...
Any suggestions for a rugged case that won't slide, or has anyone actually used the Active on their dashboard with non-sliding results?
Thanks..!
namebrandon said:
I love the look of the red / black and white/black Seidio Active, but I've read that it's not grippy.. so that if I put it on the car dash and take a turn, it might be sliding all over.. It's a minor point, but important to me.. I don't drive enough to buy a car dock, so I'm skipping that option...
Any suggestions for a rugged case that won't slide, or has anyone actually used the Active on their dashboard with non-sliding results?
Thanks..!
Click to expand...
Click to collapse
Because I love the Seido Active so much myself, I would recommend something like this for your dash. Pretty cheap and has some good reviews.
Thanks! That's perfect, I was getting frustrated because that Active case was perfect in every way, except that.. I think it's a great solution.
Now to find the place with the cheapest Active Combo set.. Gotta have my holster!
namebrandon said:
Thanks! That's perfect, I was getting frustrated because that Active case was perfect in every way, except that.. I think it's a great solution.
Now to find the place with the cheapest Active Combo set.. Gotta have my holster!
Click to expand...
Click to collapse
This one seems to be the cheapest Yeah, I wouldn't want to use any other case. I've seen those sticky pads at Office Depot and Radio Shack if you don't want to order it from Amazon, also.
Those grippers hold really well. I tested it once and it could almost hold my old phone at a 90 degree angle. I just cut a strip the width of the phone and put it somewhere... no need for the whole pad.
The whole pad would be nice cause if u got extra **** theirs more room
Sent from my ADR6425LVW using XDA App
Anyone know of a car dock or holder for another phone that may work with LTEvo?
Sent from my LTEvo using Tapatalk 2
http://forum.xda-developers.com/showthread.php?t=1667679
Also available in Sprint retail stores for less than $40
bighuta said:
http://forum.xda-developers.com/showthread.php?t=1667679
Also available in Sprint retail stores for less than $40
Click to expand...
Click to collapse
I just received that dock yesterday. First impressions are very good. One small exception.
I use the Platinum case that I got at Best Buy, which is essentially the same as the Seidio case.
The phone docks fine, but the case causes the phone to "tilt" a bit to the left. Even with the sleeve out of the dock, it still tilts a bit and does not seat all the way.
But it is barely noticeable and the dock works great.
If you get this dock, be advised that it does not come with a microUSB cable for connecting the dock to your 12v supply in your vehicle. But if your former phone was an EVO 4G like me, you probably have many of those cables laying around any way.
If you do not use a case, however, with the sleeve in the phone fits like a glove.
If you have seen or used the Seidio dock for the OG, like I did, the first thing I can say about this new dock is even though the EVO LTE is larger than the OG, the dock is less intrusive on the windshield.
Thanks, but i mainly just need something to hold my phone. I don't use the NAV on my phone anymore, so i just need something so my phone isn't sitting in my cupholder.
looks sexy but...
I just got my Diztronic case which is absolutely the perfect case and it will not fit in the dock. Not quite sure what to do... I'm leaning towards returning the dock.
EDIT:
after taking the insert out and using the pads in the box it works great!
sandtrapjack said:
I just received that dock yesterday. First impressions are very good. One small exception.
I use the Platinum case that I got at Best Buy, which is essentially the same as the Seidio case.
The phone docks fine, but the case causes the phone to "tilt" a bit to the left. Even with the sleeve out of the dock, it still tilts a bit and does not seat all the way.
But it is barely noticeable and the dock works great.
If you get this dock, be advised that it does not come with a microUSB cable for connecting the dock to your 12v supply in your vehicle. But if your former phone was an EVO 4G like me, you probably have many of those cables laying around any way.
If you do not use a case, however, with the sleeve in the phone fits like a glove.
If you have seen or used the Seidio dock for the OG, like I did, the first thing I can say about this new dock is even though the EVO LTE is larger than the OG, the dock is less intrusive on the windshield.
Click to expand...
Click to collapse
It does tilt a bit, but that's what those two tiny foam pads that came with it are for. I put one on the right bottom side and the other on the middle nearer to the backside of the phone. It's almost perfectly balanced now.
bds369 said:
I just got my Diztronic case which is absolutely the perfect case and it will not fit in the dock. Not quite sure what to do... I'm leaning towards returning the dock.
Click to expand...
Click to collapse
I have the same case and it fits fine in the car dock. Did you remove the extra insert? There's an insert (adapter) that is in there for a naked LTE. It just pops right out and your Diztronic covered LTE will fit right in there. Make sure to use the two foam pieces on the right hand side so your phone doesn't tilt.
http://www.amazon.com/dp/B003SE6LD0
This is what I used with my Photon and it works perfectly with the evo lte. Just turn it sideways and turn on car mode. It holds TIGHT to the windshield and wont come off.. even in Texas heat. For extra fun take a nfc tag and have it auto launch car dock when near
Hello all!
So, if the winter storms allow it, on Thursday I will have my Xperia Ultra to replace my beloved Note 2. Shame on you Samsung for the "amazing" .18" display size increase of Note 3!
Anyways, as always I like to have my phone ready with some accessories.
I am still a bit confused about this whole magnetic charger thingy so please provide any feedback, recommendations etc or something I might be missing as well! :good:
For first...a basic cheap case for normal use..unless I change my mind and get something with a flip.
Cheapo case
Or maybe this one too for now as a battery and more protective case:
Case and 5000mAh battery
Car mount:
Mount
Finally for now this one confuses me: the dock/charger thing:
Are either of this the same and do I need something else besides the doc...? Like I have read about a magnetic cable too.
Doc1
Doc2
I am still wanting a stylus but I would like some sort of case with a thin stylus that I can hide into the case...yes, I am used to my note spen
And also I was planning to get my usual Zagg screen protector but not sore sure if anyone has tried it since a search for Zagg showed no results.
Thanks for any help!
dealxtreme
I have deleted my long list of Xperia Z Ultra accessories found of dx.com/dealxtreme.com because they are utterly useless.
I ordered five things and ensured that they were not marked out of stock. A week later they sent me an email saying they couldn't send because something was out of stock. It proved impossible to respond to them: email bounced, phone numbers didn't work or were never answered, website chat didn't work. Their online ticketing system didn't allow creating a ticket to discuss order, you had to enter a SKU code and I didn't know which item was in doubt. Eventually I stumbled on a ticket type I could create (problem with paying) so I sent them a message and they admitted there were three items of the five they couldn't get! They asked for more time, after five days I told them to cancel the order with a full refund.
So, stay away from DX.com / dealxtreme.com as they are clearly utterly utterly useless.
This is the dock I got and have had good experiences with it. It is slow to charge but works well as a stand for you to charge your phone overnight.
http://forum.xda-developers.com/showthread.php?t=2464956
julz said:
This is the dock I got and have had good experiences with it. It is slow to charge but works well as a stand for you to charge your phone overnight.
http://forum.xda-developers.com/showthread.php?t=2464956
Click to expand...
Click to collapse
How slow? The original DK30 uses around 2 hours to charge from 0-100%.
I see that Brando also have a bunch of X Z U accessories:
http://mobile.brando.com/shop/Sony-Xperia-Z-Ultra
they're more expensive than DX, but Brando in my experience are usually good quality and offer good customer service.
I've still not seen a car dock that I want to buy, I want one that will hold my XZU whilst its in its case, and attach to the windscreen. So far universal tablet holders designed for smaller tablets have looked like the best option.
speculatrix said:
I ordered some of those DX.com accessories yesterday, namely a dock, a mag charge cable, and the front+back protectors. I'll comment on how long they take to arrive and what the quality is like.
I see that Brando also have a bunch of X Z U accessories:
http://mobile.brando.com/shop/Sony-Xperia-Z-Ultra
they're more expensive than DX, but Brando in my experience are usually good quality and offer good customer service.
I've still not seen a car dock that I want to buy, I want one that will hold my XZU whilst its in its case, and attach to the windscreen. So far universal tablet holders designed for smaller tablets have looked like the best option.
Click to expand...
Click to collapse
Regarding car dock, I got one from infiniapps, really like the design and you can use it with a case, works better with a thin case. I would recommend the tablet version and then buy 2 of the phone metal inserts.
http://www.infiniappstands.com/
Sent from my C6833 using XDA Premium 4 mobile app
speculatrix said:
I ordered some of those DX.com accessories yesterday, namely a dock, a mag charge cable, and the front+back protectors. I'll comment on how long they take to arrive and what the quality is like.
I see that Brando also have a bunch of X Z U accessories:
http://mobile.brando.com/shop/Sony-Xperia-Z-Ultra
they're more expensive than DX, but Brando in my experience are usually good quality and offer good customer service.
I've still not seen a car dock that I want to buy, I want one that will hold my XZU whilst its in its case, and attach to the windscreen. So far universal tablet holders designed for smaller tablets have looked like the best option.
Click to expand...
Click to collapse
I just use a generic windscreen holder to hold phone used it with my ipad mini until I sold it so use it for XZU which is good use my flip case with it and plug in my micro usb and aux cable. I haven't used a magnetic charger yet though with this phone may have to buy 1 and haven't used a dock dk30 isit are they any good I just can't really see me using 1 at night
Sent from my C6833 using Tapatalk
The caseology car mount will also fit the z ultra and looks pretty good. Link
shaolin95 said:
Hello all!
So, if the winter storms allow it, on Thursday I will have my Xperia Ultra to replace my beloved Note 2. Shame on you Samsung for the "amazing" .18" display size increase of Note 3!
Thanks for any help!
Click to expand...
Click to collapse
I bought this windscreen mount. Works really well as was designed specifically for the Ultra
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemVersion&item=360722447342&view=all&tid=441532569023
I'd stick with the DK30 dock. The maglock cable i used from DX.com wrecked my ultra. (after plugging in the magdock cable it started playing up. charging and discharging irregularly. Had to have a full mainboard replacement.) So its been 6 weeks and my ultra is finally being sent back to me after a major repair.
Link not working, can you try again?
I edited my first post and removed all links to DX website and replaced the posting to say people should avoid them
speculatrix said:
I edited my first post and removed all links to DX website and replaced the posting to say people should avoid them
Click to expand...
Click to collapse
Good call, ordered some stuff for my Z1 while some month ago. Got a mail saying everything was shipped however the tracking number went nowhere. Waited some month, nothing and tracking number still a dud. Have emailed them several times with no response. I will never order there again. Is Brando more reliable?
Sent from my C6903 using Tapatalk
|'ve bought things a few times from Brando and not been let down but not for a couple of years as it's often easiest to buy off ebay. I've not heard bad things about them, so I would be happy to buy off them.
speculatrix said:
|'ve bought things a few times from Brando and not been let down but not for a couple of years as it's often easiest to buy off ebay. I've not heard bad things about them, so I would be happy to buy off them.
Click to expand...
Click to collapse
Another vote for Brando. Efficient and reliable.
Sent from my C6833 using XDA Premium 4 mobile app
shaolin95 said:
Hello all!
So, if the winter storms allow it, on Thursday I will have my Xperia Ultra to replace my beloved Note 2. Shame on you Samsung for the "amazing" .18" display size increase of Note 3!
Anyways, as always I like to have my phone ready with some accessories.
I am still a bit confused about this whole magnetic charger thingy so please provide any feedback, recommendations etc or something I might be missing as well! :good:
For first...a basic cheap case for normal use..unless I change my mind and get something with a flip.
Cheapo case
Or maybe this one too for now as a battery and more protective case:
Case and 5000mAh battery
Car mount:
Mount
Finally for now this one confuses me: the dock/charger thing:
Are either of this the same and do I need something else besides the doc...? Like I have read about a magnetic cable too.
Doc1
Doc2
I am still wanting a stylus but I would like some sort of case with a thin stylus that I can hide into the case...yes, I am used to my note spen
And also I was planning to get my usual Zagg screen protector but not sore sure if anyone has tried it since a search for Zagg showed no results.
Thanks for any help!
Click to expand...
Click to collapse
Hello shaolin. Just wondered what your current accessories list is. I remember seeing you found a smart watch? I'm looking for something similar to smart watch 2 just wondered what you had. And in the way of charging and protection of phone. Thanks mate.
Sent from my HTC One using Tapatalk
nathlynn22 said:
Hello shaolin. Just wondered what your current accessories list is. I remember seeing you found a smart watch? I'm looking for something similar to smart watch 2 just wondered what you had. And in the way of charging and protection of phone. Thanks mate.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Hello!
I have been using the ZGPAX S5 watch. It is very powerful, not sure if you have seen some of the videos I uploaded but it runs emulators like MAME, Dreamcast and can even use the PS3 controller
BUT, the company that built it is as good it if did not exist because forget about any support from them.
So if no dev picks it up, you are not going to get much from it.
It is more of a Standalone watch than a companion to your phone. Currently only using an app called TableTak is how you can get text messages and reply from the watch.
For charging I bought the original DK30 magnetic charger. Expensive but well worth it.
As for protection, I bought some "explosion proof" glass protector for the front and a regular film protector for the rear and just some cheap plastic case from ebay just for when I am carrying it around. At home etc I just like the feeling of it naked so no cases there
Also about the watch, I returned it as the GPS was not working and right now I am undecided between buying it again or waiting for one to have ALL the features without having to fight to get things working.
shaolin95 said:
Hello!
I have been using the ZGPAX S5 watch. It is very powerful, not sure if you have seen some of the videos I uploaded but it runs emulators like MAME, Dreamcast and can even use the PS3 controller
BUT, the company that built it is as good it if did not exist because forget about any support from them.
So if no dev picks it up, you are not going to get much from it.
It is more of a Standalone watch than a companion to your phone. Currently only using an app called TableTak is how you can get text messages and reply from the watch.
For charging I bought the original DK30 magnetic charger. Expensive but well worth it.
As for protection, I bought some "explosion proof" glass protector for the front and a regular film protector for the rear and just some cheap plastic case from ebay just for when I am carrying it around. At home etc I just like the feeling of it naked so no cases there
Also about the watch, I returned it as the GPS was not working and right now I am undecided between buying it again or waiting for one to have ALL the features without having to fight to get things working.
Click to expand...
Click to collapse
I did see the videos yes did look pretty good. Apart from using a very small screen lol. I take it you use emulators on your xzu though. I think my best bet is getting a smart watch 2 at some point then. Do you actually use the dk30 dock or you taken the cable out? I can't see myself getting 1 as I always have a flip case on the phone as too worried about the phone. And wouldn't want to keep taking it out of case etc. I would like to find a genuine Sony magnetic charger though. If I do keep my xzu I would like to get some good accessories. But at present my xzu is in repair. So I have been debating about getting a HTC one max. Just not sure. I do want a good power flip case though would like the cp12. And like the look of the sbh52. that screen protector is it a glass protector and if so where did you get it from? What apps do you currently have on phone any useful/interesting ones?
Sent from my HTC One using Tapatalk
nathlynn22 said:
I did see the videos yes did look pretty good. Apart from using a very small screen lol. I take it you use emulators on your xzu though. I think my best bet is getting a smart watch 2 at some point then. Do you actually use the dk30 dock or you taken the cable out? I can't see myself getting 1 as I always have a flip case on the phone as too worried about the phone. And wouldn't want to keep taking it out of case etc. I would like to find a genuine Sony magnetic charger though. If I do keep my xzu I would like to get some good accessories. But at present my xzu is in repair. So I have been debating about getting a HTC one max. Just not sure. I do want a good power flip case though would like the cp12. And like the look of the sbh52. that screen protector is it a glass protector and if so where did you get it from? What apps do you currently have on phone any useful/interesting ones?
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
I used the DK30 all the time. I prefer the phone without a case...only phone that I actually have done this with..it just feels to awesome to hold.
That is the reason I added the glass in front and film on the back though.
This is what I got Glass Protector
As for apps, gosh I got too much stuff to name
From lots emulators to music apps like for tuning my violin.
Folder Mount which I used to same big game data to the external card is a must for me.
shaolin95 said:
like for tuning my violin.
Click to expand...
Click to collapse
I'll be waiting for the YouTube video!
Sent from my C6833 using Tapatalk
LordManhattan said:
I'll be waiting for the YouTube video!
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
hahaha I have a youtube channel of tons of covers (singing) and some piano but for violin.....give me 20 or 30 more years plese :laugh:
The new version goes to 6.3 in phone now has anyone tried it ?
http://www.samsung.com/us/mobile/cell-phones-accessories/ECS-K200BEGSTA wish I still had my old 50% off accessories code had the old dock for my note 3 and it worked really well one touch open well built..
xterra91 said:
http://www.samsung.com/us/mobile/cell-phones-accessories/ECS-K200BEGSTA wish I still had my old 50% off accessories code had the old dock for my note 3 and it worked really well one touch open well built..
Click to expand...
Click to collapse
I really liked the old one that I used for my Note II. I did try to squeeze my Spigen case in there... it technically worked... but too tight for my liking. I ordered a universal one that was supposed to fit 6" phones and had good reviews. Had a coupon as well and got 15% off and free worldwide shipping. I posted about it a few days ago... My biggest concern with this dock is where the pads will meet the phone may be where the power and volume buttons are. The one I ordered has a small but very grippy area, so I can off-set the phone in it to avoid the buttons.
I have one from my Note 3 I'll take some pictures when I go home. Its been collecting dust in my basement for a while I'll let you know how it goes.
I have this dock, it literally just closes round the phone, the only thing is sometime the sides catch the volume rocker
http://www.verizonwireless.com/accessories/vent-adhesive-combo-mount/ I purchased this one the other day phone fits only paid 15$ with vzw work discount works pretty well so far ..
Will post pics later ..
I haven't been able to find mine yet I've looked through some boxes in my basement but I'm not sure which one its in.
I have the Samsung Univerrsal, It works pretty well overall.
xterra91 said:
The new version goes to 6.3 in phone now has anyone tried it ?
Click to expand...
Click to collapse
It doesn't do much for the curved back on the phone but other than that it's a good fit.