Related
Hello guys I want your help a little bit
I have a Droid DNA and suddenly the phone has turned off for no reason, when I turned it on again, it frezees in HTC boot logo "blablabla development blablabla) and restarts and it keeps in a bootloop, I can enter into fastboot, so I put it on to charge it, and 15 minutes LATER, i tried to turn it on again, no luck, so i put it into usb mode, and booted and it can boot normally, but when I quit the usb the phone turn it off and goes again in this crazy bootloop, also I cannot enter into the recovery mode (I installed TWRP and tried to enter but it freezes into in blue logo), and again I put USB on (No charger) and it enters, I flash a ROM and reboot, but when I disconnect USB CORD (NOT CHARGER) it turn off and again comes the bootloop crap, so I think its the battery but I opened the phone and I dont see a sign of battery death (like inflated) so I dont know if its a battery problem or a motherboard problem? What should I do? buy the battery or have a nice red brick? help me please.
Sorry for bad english Im not American.
Please help!!!!
Zero_Lord said:
Please help!!!!
Click to expand...
Click to collapse
To start with , put it on a known good charger for 24 hours .
Hello there. Since I'm new here I'd like to say hello to everyone
Today I got my RAZR and wanted to play with it. It was already rooted and it had a 4.1.2 android for it, but I didn't liked it at all so I tried to install MIUI. After creating a new partition (1) i had installed miui, but after reboot phone died - Motorola logo appears and it reboots. I looked for some info in the internet and I found about installing new, clean rom via fastboot. I downloaded SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSRTCEE_HWp2b_Service1FF_fastboot archive and tried to install it with Eternity Project, but after rebooting system does not start and android with red triangle appears.
Right now I am stuck and I don't know what to do. Could you guys tell me what should I do? The phone is RAZR XT910 from European distribution. Also, my Phone is being recognized as Spyder S.
Thank's in advance
Maciek
maciekk600 said:
Hello there. Since I'm new here I'd like to say hello to everyone
Today I got my RAZR and wanted to play with it. It was already rooted and it had a 4.1.2 android for it, but I didn't liked it at all so I tried to install MIUI. After creating a new partition (1) i had installed miui, but after reboot phone died - Motorola logo appears and it reboots. I looked for some info in the internet and I found about installing new, clean rom via fastboot. I downloaded SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSRTCEE_HWp2b_Service1FF_fastboot archive and tried to install it with Eternity Project, but after rebooting system does not start and android with red triangle appears.
Right now I am stuck and I don't know what to do. Could you guys tell me what should I do? The phone is RAZR XT910 from European distribution. Also, my Phone is being recognized as Spyder S.
Thank's in advance
Maciek
Click to expand...
Click to collapse
When you see android with red triangle just press vol- and vol+ and find the option factory reset.
From your post I see that you flashed ICS Fastboot file,right?
Were you on ICS or JB before brick?
Sent from my Razr XT910
Well, as far as I remember it was JellyBean. I tried to flash it, but it didn't work at all. When I tried to flash the newest available soft for my RAZR it didn't want to flash (it was stopping at 1st step - when using RSD Lite, but when I used EPRJ flashing method, after reboot phone couldn't find any files copied to it's cache or something). Right now my battery is too low and I guess the only option is to make a factory cable, because it won't even charge.
And factory reset doesn't change anything: still the Motorola logo appears and then the phone turns off and sometimes reboots.
Is there any way I could install system via install update from sd card option? Or the only thing I can do is to try to install clean Android via RSD or EPRJ?
maciekk600 said:
Well, as far as I remember it was JellyBean. I tried to flash it, but it didn't work at all. When I tried to flash the newest available soft for my RAZR it didn't want to flash (it was stopping at 1st step - when using RSD Lite, but when I used EPRJ flashing method, after reboot phone couldn't find any files copied to it's cache or something). Right now my battery is too low and I guess the only option is to make a factory cable, because it won't even charge.
And factory reset doesn't change anything: still the Motorola logo appears and then the phone turns off and sometimes reboots.
Is there any way I could install system via install update from sd card option? Or the only thing I can do is to try to install clean Android via RSD or EPRJ?
Click to expand...
Click to collapse
The only way is to flash it with RSD Lite.
Here http://forum.xda-developers.com/showthread.php?t=2231289 are all JB Fastboot files.
Sent from my Razr XT910
Okay. I downloaded the british retail soft, we'll see if it works. But will this soft have Polish language?
And the second thing: is there any way to charge the phone when in my situation? When I plug in the charger, white led only flashes for a while and then the bootloop starts - motorola logo appears and that is all. I have also tried the method with pressing vol + and - for 10 seconds and again, but this didn't work either. The only exit here is to make factory cable, right?
maciekk600 said:
Okay. I downloaded the british retail soft, we'll see if it works. But will this soft have Polish language?
And the second thing: is there any way to charge the phone when in my situation? When I plug in the charger, white led only flashes for a while and then the bootloop starts - motorola logo appears and that is all. I have also tried the method with pressing vol + and - for 10 seconds and again, but this didn't work either. The only exit here is to make factory cable, right?
Click to expand...
Click to collapse
Right,with factory cable you can't charge the phone but you can flash fastboot file,that's what it's for.
Sent from my Razr XT910
It worked, thank God. Thanks for the advice, next time I'll be more careful with my RAZR
Greets!
But another problem suddenly appears - my battery won't charge over 40%. Tried turning it off, but it didn't work.
Edit: I have had 50%, now I have 60. It looks like it's going up and changes after 10%. We'll see if it manage to charge up 100% battery.
Edit2: Okay, it fully charged. Thank's again mate for tips
hi
so the story is - i have motorola xt910 (MAXX hd) from europe
i have installed bootmenu manager and safestrap 3.72
firstly the stock rom didnt work anymore,safestrap was disabled,but i have installed CW11 on slot 1 and everything was fine,until battery died
Now i cant turn on it, when i plug razr to wall charger its turn on by itself and stuck on M logo
when i plug to usb cable,sometimes the same - stuck on M logo on led is active - the strange thing that i dont turn it on but the logo is appearing
but i cant turn it on
i have tried VOLUME DOWN+VOLUME UP+POWER
nothing..
please help
talboris said:
hi
so the story is - i have motorola xt910 (MAXX hd) from europe
i have installed bootmenu manager and safestrap 3.72
firstly the stock rom didnt work anymore,safestrap was disabled,but i have installed CW11 on slot 1 and everything was fine,until battery died
Now i cant turn on it, when i plug razr to wall charger its turn on by itself and stuck on M logo
when i plug to usb cable,sometimes the same - stuck on M logo on led is active - the strange thing that i dont turn it on but the logo is appearing
but i cant turn it on
i have tried VOLUME DOWN+VOLUME UP+POWER
nothing..
please help
Click to expand...
Click to collapse
The led color,is it white?
If it is,then you must make or buy the factory cable and flash your stock rom with RSD Lite.
Sent from my Razr XT910
yes,its white
now i have managed somehow to turn it on
but the problem is that stock ROM in safestrap is always Disabled ,i cant use it ?
so i can use it only with factory cable? whats so special in it ?
do i have to use only original stock rom ? shouldnt safestrap to bypass it ?
talboris said:
yes,its white
now i have managed somehow to turn it on
but the problem is that stock ROM in safestrap is always Disabled ,i cant use it ?
so i can use it only with factory cable? whats so special in it ?
do i have to use only original stock rom ? shouldnt safestrap to bypass it ?
Click to expand...
Click to collapse
If you can turn it on then your battery is ok,just flash your stock rom with RSD Lite,root it,install Safestrap and happy flashing.
The factory cable allows you to flash the fastboot (stock rom) files when your battery is too low.
Did you try to get in to fastboot mode?
Pressing vol- vol+ and power button at the same time?
Look what's written for the battery,Battery OK-good,Battery Low-you need the factory cable.
Sent from my Razr XT910
welder73 said:
If you can turn it on then your battery is ok,just flash your stock rom with RSD Lite,root it,install Safestrap and happy flashing.
The factory cable allows you to flash the fastboot (stock rom) files when your battery is too low.
Did you try to get in to fastboot mode?
Pressing vol- vol+ and power button at the same time?
Look what's written for the battery,Battery OK-good,Battery Low-you need the factory cable.
Sent from my Razr XT910
Click to expand...
Click to collapse
i turned it on,everything was ok,plugged and unplugged cables several times,then once again when battery died
when i connect to a laptop - the led is whight
when i connect to wall charger - i have M logo and then battery with question mark
what does it mean ?
talboris said:
i turned it on,everything was ok,plugged and unplugged cables several times,then once again when battery died
when i connect to a laptop - the led is whight
when i connect to wall charger - i have M logo and then battery with question mark
what does it mean ?
Click to expand...
Click to collapse
first. installing safestrap and boot menu manager at same time is not recommended.
second. if I understood you, you flashed cm11 over stock ROM. but you provide no info about how you did it.My guess is you didn't wipe all recommend partitions.
that leads me to third, your battery stats probably were messed up. next time you charge it try to wipe your battery stats, there is apps in play store that will do it for you. some people say it doesn't does a difference, certainly your battery will not magically improve, but it does corrects weird behaviors.
If it doesn't works, try using RSD as welder73 told you. troubleshooting is easier in a clean and working system. what I am proposing is worthy to try if you have data that you cannot loose.
note: don't know how factory cable works, but I hope you are using it instead of directly connecting cable to the battery. cause charge might not be controlled if you charge directly to battery terminals... if you let it charge too much time it can damage battery.
xt910 can be a RAZR MAXX but not a MAXX HD which is a totally different phone.
angrist said:
first. installing safestrap and boot menu manager at same time is not recommended.
second. if I understood you, you flashed cm11 over stock ROM. but you provide no info about how you did it.My guess is you didn't wipe all recommend partitions.
that leads me to third, your battery stats probably were messed up. next time you charge it try to wipe your battery stats, there is apps in play store that will do it for you. some people say it doesn't does a difference, certainly your battery will not magically improve, but it does corrects weird behaviors.
If it doesn't works, try using RSD as welder73 told you. troubleshooting is easier in a clean and working system. what I am proposing is worthy to try if you have data that you cannot loose.
note: don't know how factory cable works, but I hope you are using it instead of directly connecting cable to the battery. cause charge might not be controlled if you charge directly to battery terminals... if you let it charge too much time it can damage battery.
xt910 can be a RAZR MAXX but not a MAXX HD which is a totally different phone.
Click to expand...
Click to collapse
tnx for anwering
whai i did :
1)installed bootmenu manager
2)installed safestrap
after that STOCK ROM stopped to work - i didnt perform any wipe
3)i have installed CW11 on slot 1
problems started when battery dies
4)somehow i have managed to turn it on and installed Slimbin on STOCKROM
now i have this question mark - cant turn it on and cant use RSD since battery is LOW, i have tried RSD before it said "fail" Razr refused or something..
so my question for the next time
shouldnt i install bootmenu prior to safestrap ?
what wipe should i do ?
how do i wipe partitions ?
talboris said:
tnx for anwering
whai i did :
1)installed bootmenu manager
2)installed safestrap
after that STOCK ROM stopped to work - i didnt perform any wipe
3)i have installed CW11 on slot 1
problems started when battery dies
4)somehow i have managed to turn it on and installed Slimbin on STOCKROM
now i have this question mark - cant turn it on and cant use RSD since battery is LOW, i have tried RSD before it said "fail" Razr refused or something..
so my question for the next time
shouldnt i install bootmenu prior to safestrap ?
what wipe should i do ?
how do i wipe partitions ?
Click to expand...
Click to collapse
ok. when you get into fastboot and try to RSD and get a Low Battery warning, the is no other way left... charge battery. or get a factory cable, there is a thread explaining how to build one.
first question. you have to choose one of them. for newbies, safestrap cause all new ROMs are prepared to work with that program. if later, u decide to test bout menu manager, you will have to uninstall safestrap ( of course you will not be able to use any ROM installed with safestrap). since boot menu manager is no longer supported, you will need to mod ROM zip file prior to flashing that's why i recommend sticking to safestrap for now. Don't install both, they are not meant to work together.
second question. To install in stock ROM, you have to wipe everything except sdcard and sd-ext where you personal data is (never tried, so can't help you more). for slot1 Wiping is not necessary first time, cause slot1 is fresh. next time yo install other ROM you will have to wipe data, cache and system. double check what you ate doing, so you don't wipe stock instead of slot1.
Wipe options are in safestrap.
SafeStrap and Boot Manager
I have accidently installed both apps on my Motorola Razr XT910 and my phone is now stuck on the red logo - I cannot get it into the bootloader to unbrick it with RSD Lite. Is there anybody who can advise ?
ok,i somehow managed to turn it on
now i want to flash 4.0.4
the phone itself form Norway,what ROM should i use? i tried to install Asian but it didnt work "some file not singed"
i just downlod zip file,unzip it, and choose xml file in RSD lite?
talboris said:
ok,i somehow managed to turn it on
now i want to flash 4.0.4
the phone itself form Norway,what ROM should i use? i tried to install Asian but it didnt work "some file not singed"
i just downlod zip file,unzip it, and choose xml file in RSD lite?
Click to expand...
Click to collapse
Yes,but flash the Europian fastboot file.
And don't try to flash ICS if your stock was JB.
You can flash JB fastboot file with RSD Lite if you want,that way you'll upgrade to JB.
About RSD Lite,I unzip file with it,if I remember correctly,click on start,choose decompress only and find your zip.
Sent from my Razr XT910
Okay.. I have a similar problem which I have ran into now..Yesterday I was just using my phone normally and was trying to call someone, when the phone immediately shut down..my guess was that the battery stats were screwed up..So I tried charging it and even I had the question mark on the battery when I connected it to the charger. I couldn't switch on the phone manually. I was on PA android jellybean 4.3.1. So should I also need a factory cable or something to restore my phone??
Thanks in advance
So I rooted my HTC ONE S (villec2) today, and I wanted to flash a custom rom on it. I got a recovery (turned out to be a bad one, but it worked either way.... I noticed way too late it was made for HTC One M8) I got TWRP 2.7.1.0 and I got it working on my phone. I then backed up the system, and realized I messed up the recovery. In the meantime I got a CM 12.1 img on it and wiped the thing. The wipe removed the old Android system and the CM I downloaded was a bad download. If I go to recovery in the bootloader, it will just do the HTC white screen with "Entering Recovery" and the red warning logo but it won't get anywhere. It's just stuck there. So now, I'm stuck with a device that won't boot normally - just stuck on the white HTC screen, will boot into bootloader, and I want to know if there's a way of accessing the internal storage without being in the operating system. The worst thing is, there's no external SD Card, all just internal... Please god help me. I'm really stressing out about this since it's the only phone I have and if I lose it.... well I'm practically f-ed.... :crying: I know that I messed a few things up really badly and I'm not sure what state the phone is in.
Also just to add, the phone is barely loading up right now. I'm really scared since it's my only phone and it won't even boot normally right now. It's really acting strange, it was on 90% battery but now it might just be dead... i don't know.... someone please help
I honestly think I screwed it up.... All it does now is just a white flash / flicker when I hold the power button (both only power button and vol down) and that's it. I'm really disappointed right now but oh well.... Maybe just because the battery is not charged.... Also been looking around the other threads and looks like a lot of people had the same issue but with 0 replies...
hi friend
i ve bricked a phone once and i recover it with flashing stock rom
did you try the stock rom ?
cazawiman said:
hi friend
i ve bricked a phone once and i recover it with flashing stock rom
did you try the stock rom ?
Click to expand...
Click to collapse
I have no way of trying the stock rom. I cannot access the phone itself because I deleted the OS. There's a weird thing, that if I plug the USB to the computer, it does the connect windows sound but the phone's internal storage is still not accessible.... So as it turns out I can get to the freaking bootloader but then it just turns off with a white flicker a second later.... I have no clue what to do :crying:
try to hook your device with windows and hold the Volume Down and Power
to see if it can detect it
cazawiman said:
try to hook your device with windows and hold the Volume Down and Power
to see if it can detect it
Click to expand...
Click to collapse
Alright. I slept through the night and now I'm here trying to resolve this again. Status now, is that when I try to boot it up, it just shows a white flicker and won't turn on. no matter if i try to boot in bootloader or normally. The device doesn't appear to be charging when I plug it in because it doesn't show the LED light for charging. I think it's hard bricked. I tried other threads, showing bright light to the proximity sensor, but nothing happened.
//edit// - My bootloader was unlocked, and I was on S-ON (HTC ONE S, S3 villec2) that might change on your phone and might make the process different
So I fixed it. I will leave the tutorial for anyone in the future that might be having the same issue. If you "locked yourself out" of your system, eg. no OS, and broken recovery just plug it into the computer, try somehow getting into bootloader, go into fastboot and plug the usb cable to your computer so you're in Fastboot USB. Then you can flash a recovery on the phone using a fastboot command. I believe it's fastboot flash recovery _filename_. Just google that, there'll be plenty. Then you have the recovery and you're back on track. After that you can get the rom you wanted. Just don't make my mistake, and check if your device is exactly the same as the files you're downloading for it. I messed up there . Anyway, good luck everyone!
t
yea
Happy to hear that u have fixed your phone add "solved " to the title and add a fast tutorial for help purpose
Sent from my thl T6 pro using XDA Free mobile app
The phone told me there was a new update I started to install it, got to reboot and now is just on the elephone logo which comes every 20 sec and goes again. I cannot turn the phone off or do anything with it. Any help please
For me just shut down the phone and then reiniciat the phone ....work for me....
Enviado do meu thor através de Tapatalk
same problem here.. wtf nice update elephone, we cant be the only ones right?
now stuck on logo, restarting every 3 seconds with 100% battery...i m not even sure it will work again if battery is drained out
i can do nothing, no trys to get in factory mode or shut the phone down worked..
stuck on elephone log after upgrade
My elephone P9000 is now cycling the elephone logo every 8 seconds or so after the latest audio upgrade... It will not switch off or do anything else. Did you solve the problem. Or anyone else help. Can you share with me? Thank you.
same problem here.. wtf nice update elephone, we cant be the only ones right?
now stuck on logo, restarting every 3 seconds with 100% battery...i m not even sure it will work again if battery is drained out
i can do nothing, no trys to get in factory mode or shut the phone down worked..
Click to expand...
Click to collapse
so my battery was fully empty now.. i even pressed the power button 100 times after the battery was empty, to make sure all current is out of the phone.
plugged in charger... after 10 seconds phone start itself (after viewing the picture of empty battery) and elephone logo shows short and then back to showing picture of empty batterie cycle. After some minutes, and battery is loaded a little bit, elephone logo cycles again.
So rest in piece my p9000, i can nothing, i cant do anything from my pc because its only starting for like 5 seconds, i cant shut it down because of that and i cant get in factory mode
i am so pissed right now
just wanted to install the new update, everything worked fine like all the times before that and now my phone is ready for the trashcan.
Is there any way to reset the software without getting in factory mode?
Reset from sp flash tools?
Pro4TLZZ said:
Reset from sp flash tools?
Click to expand...
Click to collapse
the phone turns on and off in a cycle of 5 seconds, so that wont work
and i cant stop that cycle.
even if battery is 0% (i even press power button many times so really its drained out). If i recharge it, the cycle starts again without me doing anything. The Power button is not broken or something. it all began after i started new ota update and the phone rebooted like "mkitty" has the same problem it seems
Same for me, I have no idea how to restart my phone. And i dont want to loose all data I have on it.
have you tried to hold the volume up and power at the same time during the restart process to try and force recovery?
xvicedice said:
have you tried to hold the volume up and power at the same time during the restart process to try and force recovery?
Click to expand...
Click to collapse
Hello,
Yes . I have tried that.
I have a list of options that come up on the screen.
I have tried them apart from the wipe data/factory reset.
But it is still the same result.
Thank you for help.
Any more ideas?
what OTA update version did you update?
Simplytouched said:
what OTA update version did you update?
Click to expand...
Click to collapse
It said something about wifi and audio update. I followed the instructions as per a previous update (which worked OK). I never took notice of any version numbers etc.
I have all I need to flash a new rom to the bricked phone but when I connect the off phone to my pc the usb not recognised comes up and I cannot flash the rom to the phone. and yes I have the mediatek vcom drivres install. Why did I buy a Chinese phone elephone p9000 please stay well away from it. on paper is a great phone but in reality does not perform in any sense, battery only lasts 7 hours if I was lucky camera crap, gps works most of the time all that ram and power and t struggles with some videos o dear god. never again. now I cannot even read what I have on the sd cos is formatted for the phone.
juka1 said:
I have all I need to flash a new rom to the bricked phone but when I connect the off phone to my pc the usb not recognised comes up and I cannot flash the rom to the phone. and yes I have the mediatek vcom drivres install. Why did I buy a Chinese phone elephone p9000 please stay well away from it. on paper is a great phone but in reality does not perform in any sense, battery only lasts 7 hours if I was lucky camera crap, gps works most of the time all that ram and power and t struggles with some videos o dear god. never again. now I cannot even read what I have on the sd cos is formatted for the phone.
Click to expand...
Click to collapse
Its actually a great phone. Do you have twrp installed and can you get access to it? You could always boot into twrp transfer over the ROM and install it from there. If you have installed the vcom drivers then when the USB not recognized alert pops up. Go to settings and device manager. Right click the unknown device and click let me pick driver. You should be able to install it from there
The only thing I can suggest is to take the back panel of and unplug the battery. There videos on how to do this if you search YouTube or the forum. Effectively you perform a hard reset of the phone.
If and when you do get it working just twrp installed and do a backup of the whole phone working before performing any future upgrades or Rom changes. Its just better safe then sorry.
thenk you very much for that
The problem is that when I connect the phone on the off to the pc starts again the cycling through the elephone logo so the pc sees the phone for a few seconds in which does not recognises it and then is like the phone goes off until the next cycle so no time to go to device manager and install manually. but thank you for the comment.
removing the battery will void the warranty. I had the phone only since may.
It's unlikely it really matters. Your phone seller not going to take it back or fix it for free just because it's bootlopping. Well they may so just ask them. If you can't get it into recovery then a battery disconnect or contact your seller are your options
thank you
Android-UK said:
It's unlikely it really matters. Your phone seller not going to take it back or fix it for free just because it's bootlopping. Well they may so just ask them. If you can't get it into recovery then a battery disconnect or contact your seller are your options
Click to expand...
Click to collapse
I can get it into recovery mode but I haven't got any software install in the sd card to do a recovery that is why I thought my only option was the sp flashing tool and the room which I have
juka1 said:
I can get it into recovery mode but I haven't got any software install in the sd card to do a recovery that is why I thought my only option was the sp flashing tool and the room which I have
Click to expand...
Click to collapse
Well in that case all you need is a stock rom and yes just flash them with sp tools and it should start booting again. The fact you can get to recovery is a good sign.
Android-UK said:
Well in that case all you need is a stock rom and yes just flash them with sp tools and it should start booting again. The fact you can get to recovery is a good sign.
Click to expand...
Click to collapse
sorry for all of this and thank you very much for your help but when I put the phone in recovery mode by pressing the down volume and power key and connect the phone to the pc it is not recognized by the pc so I can't flash the room