[Q] Repartition Only Help - Barnes & Noble Nook Tablet

Nook Tablet newb here. Some experience with rooting and flashing roms on GS3.
Currently working on my mothers nook tablet. She has the 8gb BNTV250A Nook Tablet currently with a 2gb/4gb partition setup. She is not satisfied with the amount of space she has for BandN books and such. From what I understand there is a way to re-partition the drives to give it a 5gb/1gb partition. This I believe would allow for any of the non BandN data to also be stored on the sd card as normal.
Now I have tried to do some research in order to find the correct procedure to root/backup/re-partition and have had no luck. Majority of what I have been finding is in regards to the 16gb versions. I know that it would be a bad idea to try to alter a 16gb procedure for a 8gb.
Is there a guide specifically for what I am trying to do? Or is there a easy click method (wishful thinking here)?
Thanks for help in advance and my apologies if anything has been asked like this before.
gtoninn :good:

There is an old thread on this topic: http://forum.xda-developers.com/showthread.php?t=1562130.
There is also a ready-made repart.img tool http://raywaldo.com/2012/06/make-unbrick-repartition-image/, although it does not provide for customized selection of userdata/media partition sizing.

Related

Nook tablet root

So I have a nook tablet that I've recently purchased. Its the basic nook tablet with minimal on board storage. Its got a 16GB micro SD. I want to root it, but I dont know which option is going to be the best. I have rooted droids, but never the nook. Completely new to it and dont feel like screwing it up and bricking it. Anyone have advice on where to start, which root I should use and what works best?
Is it the 8GB internal memory with 512mb ram model? Or the 16gb internal, 1GB ram model?
the original tablet with 16gb 1gb
I guess no one has an answer? 145 views and no more responses.
Follow this post exactly
http://forum.xda-developers.com/showpost.php?p=22029125&postcount=131
let me know if you run into problems
just remember you don't have to replace any image file you just write brianf21's img to the sd card using the tool provided (this will all make sense once you read steps)
All of us started somewhere looking at development section and pick what better suit our needs, for that you have to read. The simplest way is AlbertWertz sdcard root method, if you mess up somehow then ask and we will help you to troubleshoot but for the basics first ask yourself what are your needs if a full tablet experience or B&N experience (apps) then pick one ROM, flash it and all should go well if you read instructions to the t.
Happy rooting!
~ Veronica
Sent from my Nook Tablet using xda premium

[Q] B&N 16gb NT Repartition and SD card root

Probably a dumb newbie question but the repartitioning process described in another thread seems pretty involved.
Can I take advantage of the BN repartitioning offer by reverting to stock and then re-rooting with one of Albert's SD card image files after BN does its thing or are the image files only compatible with the standard out of the box partitioning?
Well I plan on finding out this question this weekend. I have already used the unrooter once and re-rooted on v1.42. I plan on unrooting again and taking it in to have it partitioned unless the devs get a hold of the BN way of partitioning then I will do it myself.
Let me know how that works out
Let me know how that works out.
http://forum.xda-developers.com/showthread.php?t=1531120
There is way to repartition by yourself. It's in general section, first page. gee
~ Veronica
Way to complicated for a newbie.
Way to complicated for a newbie.

[Q] "Virginal" Newbie with fried brain

I have just recently (5 hours ago) purchased a 16GB Tablet, that I had them repartition at the store, which has version 1.4.2.
I've spent the last few hours reading this forum and watching videos and now know WAY more than I ever intended to know about this tablet.
Rooting, dual OP, CM7, CM9, ROM, R3, Restore, etc. etc.
Due to so many warnings I've read about, I'm a little afraid to mess things up.
All I really want to do is install games I already have on my computer to the NT.
There were a couple of threads talking about this, but they were dealing with version 1.4.1. Not 1.4.2. I don't know how much of a difference there is.
Can someone suggest the best way to install these games?
Thanks for all the info you guys provide. It was hours of very informative reading.
i'm pretty sure games need memory ( storage ) and lots of it. tell us how much of the microhcsd you have available. did they leave you with one or six and a half gig ?
Unless you have an android computer/tablet with games from the play store or some other android market, the "games" you are referring to are not as easily transferable to an android tablet like the nook. The games have to be rewritten/redesigned for the android OS.
As for many of the warnings you've read, they are mostly to protect the person writing the guide. I.e. if you somehow manage to not follow directions and screw something up horribly, they want not responsibility for your mistakes. Honestly, 90% of them time in my experience with Android tinkering, Occam's razor holds true: the simplest answer is usually the right answer. And in terms of Android tinkering, that answer is user error.
So if you can read and follow directions and do a bit of troubleshooting here and there, you will be just fine.
My advice? Start with a bootable CM7 sd card. Go from there.
My apologies for lack of info.
After repartition, I was left with 5.91GB for B&N, and 8.00GB Other storage, plus 16GB SD Card.
Regarding games. All the games I want to use are all apk android games that I had from another android product.
Cubanluke88
The Bootable CM7 SD Card will boot from the card and leave the Tablet's OS alone? Is that correct? I guess this is where I'm confused. I think I read too much.
Please correct me if I'm wrong.
Rooting your device is like removing the old OS and replacing it with a new one?
Booting from CM7 SD Card will boot from the cards OS leaving the original OS on the device?
On one of the video's I watched, it was said "DO NOT FLASH ON THE 16GB Nook". I don't even know what that means, but I'll look it up and see if I can find out.
Thanks so much for helping a newbie who still doesn't know the terminology. I'll concentrate on reading about booting from CM7 SD Card.
Alright I'll try to address most of your confusion.
The bootable SD card essentially means you will not touch the current internal OS. You basically burn an image of CM7 to the card and when that card is inserted, the Nook will boot into CM7 instead of the B&N Android OS.
Rooting does not necessarily mean changing the internal OS. Because the B&N OS is Android based, and because Android is linux based, "root" is sort of the equivalent of administrative access on a Windows machine. It simply means you have full control of the device. Rooting the nook means the OS stays intact, but you can install the play store (Android market) and do all sorts of other things you are otherwise locked out of.
"Flash" is simply a techy way of saying install. When someone says "flash CM7 over the internal OS" they mean that you are installing CM7 (the custom version of Android that has been built) over the internal OS.
The safest thing for you is to create the bootable SD card of CM7 as it does not touch the internal OS. However, you can also create a bootable sd card for the custom recovery. From this custom recovery, you could then "flash" (install) CM7, CM9, or one of the other roms (custom OS) for the Nook tablet. It is also in this custom recovery that you can make a "nandroid backup" which is basically images of how your nook exists in its present form.
I know thats a lot of info. But honestly, before diving into this stuff, people should try to understand as much of that as possible. There are tons of resources out there that explain this stuff. Again, I suggest the bootable CM7 sd card as its the least likely to screw up. However, remember that should you go after the internal stuff, this thing is incredibly difficult to brick. Any mistake you make has likely already been made before and recovered from. So if something goes awry, don't panic.
Thats a lot of words. Damn.
It may have been a lot of words, but you've answered all of my questions and then some. I thank you very much for taking the time. This information helps tremendously and also makes so much more sense of what I read already.
Thanks Again.
That post deserved a thank. Really good description.
Sent from my R800x
We have started a very good community here, keep up people.
I should add one more thing.
Should you ever decide to go internal, i.e. flashing over the B&N OS, which IMO is the better way, its incredibly easy to return the device back to stock conditions should you ever need to (i.e. for warranty purposes or something).
I've done it myself just to make sure that its possible. And it is. Very easily.
I just wanted to come back and say Thank you!!
I was able to created the Bootable CM7 sd card and it went flawlessly.
I still have no idea what I'm doing, but I'm having fun looking around.
Thanks to this group of wonderful people, especially Cubanluke88m who still take the time to help even the virginal newbies who don't even know the lingo.
My hats off to this forum.
In the future I may in fact do this all internally, but I guess I needed to do it this way first just to see if I could. Now I feel much more comfortable with the files, burning images, etc. then before.
Congrats, enjoy.
The next thing I would recommend doing: make a clockwork mod recovery bootable card and make a nandroid backup of the internal OS.
ok, will do. I will search for those now.
I do have a couple questions that I have searched for but I think I'm using the wrong search terms and not the correct lingo.
When I partitioned the sd card there was a tutorial for opening the card so you could use the rest of the memory, but it was for Linux? I've tried to search how to do this on PC, but again the lingo problem.
Also I have books and apps that I'd like to copy over, but do I have to put them in a certain directory on the SD Card, or do I still have access to the units directory.
I know these are stupid questions, I just don't know the right words to search for. Sorry about that. I know I can search for the two things you told me to do and they will probably come up. lol
Thanks again for all your help.
Netti2nite said:
ok, will do. I will search for those now.
I do have a couple questions that I have searched for but I think I'm using the wrong search terms and not the correct lingo.
When I partitioned the sd card there was a tutorial for opening the card so you could use the rest of the memory, but it was for Linux? I've tried to search how to do this on PC, but again the lingo problem.
Also I have books and apps that I'd like to copy over, but do I have to put them in a certain directory on the SD Card, or do I still have access to the units directory.
I know these are stupid questions, I just don't know the right words to search for. Sorry about that. I know I can search for the two things you told me to do and they will probably come up. lol
Thanks again for all your help.
Click to expand...
Click to collapse
It's fine, it's always better to ask first. Could save you a lot of trouble in the long run. Unlike lots of other users, you seem like you are willing to search and learn things which is always good!
You can regain the remainder of the storage after writing the CM7 .img to your SD card. To do this in Windows, you'll need to download and install either MiniTool Partition Wizard or EASEUS Partition Master. I usually use Partition Wizard.
Unfortunately, while using the CM7 SD ROM, you won't have access to your apps and books from the stock ROM, so you'll want to transfer them to your storage inside the SD ROM. So I recommend copying the files to your computer, then connect your NT running the SD ROM. From there just copy the files to your SD card.

[Q] Very old and confused noob needs basic help

Hello, I would like to use some android apps on my nook 15 GB running 1.4.2 without rooting permenently. I need to make a SD card so I can revert back to my regular nook operating system. At age 70 the more I read the more confused I get, there is just too much information out there. Is there a simple list of instructions with no exotic extras suggested and starting with the 1.4.2 OS?
Hello, hope this vid helps (better than trying to read instructions).
http://www.youtube.com/watch?v=XBjxZxHoUsY
Thanks for the link but...
I viewed the video but it seems to be about restoring to the original software. I guess I did not explain well that I have an unaltered nook tablet and have done nothing yet. I need first to create a sd card to insert and boot to. My understanding is that I then turn off, remove the card and reboot to access the B&N software with no permanent change to my nook. Is that possible with 1.4.2?
Perfectly possible and exactly what you should do. I'll find a link in a bit, busy at the moment.
If you run CM7 from an SD card you can do a power on start to CM7 and reboot back to native nook. Booting to the SD version does nothing to the internals of the nook. The following address should get you to the development thread for CM7 alpha final. Follow the instructions for the SD version.
http://forum.xda-developers.com/showthread.php?t=1481826
I suggest a Sandisk Class 4 micro SD card. Depending on how much material you intend to download, get an appropriate size card. I am using an 8 GB and I have allocated all the leftover space to the last partition.
Directions are easy. Download the file and unzip to get the image. Use the win32diskimager program to write the image to the SD. CAUTION here be sure it is the SD that you write the image to. Google Mini Partition Wizard Home Edition and download the home edition noted as freeware to reallocate the SD space. That is simple as well. Go to the bottom partition and move the slider to the right and then save.
If you have specific questions please post and someone will respond.
Bill
I apologize for misunderstanding your original post, anyway here's another YouTube vid you can check out...hopefully this one works out for you.
http://www.youtube.com/watch?v=XxKO8-seTLU
http://forum.xda-developers.com/showthread.php?t=1679089
Generally, if you follow the steps above (short of installing the Asian apps), you'll be fine. Easy 1/2 hour to 1 hour to go through the downloading of apps, OS, Root image, etc. to having a bootable Nook that's running off the MicroSD card.
Keep in mind that ROOTing the Nook (easy, doesn't hurt) is needed to prevent B&N from disabling your external MicroSD card CM7 OS boot in the future. (You can skip ROOTing if you want to tempt fate later on however....)
Keep in mind that Sandisk MicroSD cards are generally recommended for their stability, speed, and trouble free use. You can use other brands, but if you encounter an error with your new OS, use a Sandisk card instead.
adorable said:
Keep in mind that ROOTing the Nook (easy, doesn't hurt) is needed to prevent B&N from disabling your external MicroSD card CM7 OS boot in the future. (You can skip ROOTing if you want to tempt fate later on however....)
Click to expand...
Click to collapse
This is only really necessary if you think B&N will push some update that will affect the current method used to bypass the bootloader.
This would imply a level of intelligence I don't think them capable of.
aquarian1 said:
Is there a simple list of instructions with no exotic extras suggested and starting with the 1.4.2 OS?
Click to expand...
Click to collapse
Hi, Aquarian1. I'm old, too.
Did you get it figured out? It really is fairly straightforward once you understand what each basic step is doing. You can practice repeatedly until you get comfortable without doing any harm or damage.
Let us know how it's going. The folks here are awesome. We'll get you there!

[Q] Need help flashing CM10 on 16gb NT

I have a 16gb Nook Tablet that has firmware version 1.4.3 and I would like to run one of the CM roms internally. I am thinking about trying to run CM10 because from what I have read it has finally become stable (please correct me if I am wrong).
Over the last couple of months I have been skimming through this forum reading thread after thread trying to get a grip on the process. I have a 8gb class 4 Sandisk micro SD card that I would like to use for this. From what I understand I do not need to root the tablet first if I am going to flash a rom straight onto it.
So does anyone have a favorite method for going from a stock Nook Tablet to CM7 or CM10? I also wonder whether it is easier to use Windows or a linux OS to do this. I have Ubuntu on my Desktop and Windows 7 on my laptop so I can do either one. Also, how do you create a clone or image of my Nook and SD card so that I can revert back to them if anything goes wrong?
Edit: Do I need to repartition the NT hard disk like explained here:http://forum.xda-developers.com/showthread.php?p=23272909#post23272909 or does that no longer matter once the new Rom has been installed?
GonzoT said:
I have a 16gb Nook Tablet that has firmware version 1.4.3 and I would like to run one of the CM roms internally. I am thinking about trying to run CM10 because from what I have read it has finally become stable (please correct me if I am wrong).
Over the last couple of months I have been skimming through this forum reading thread after thread trying to get a grip on the process. I have a 8gb class 4 Sandisk micro SD card that I would like to use for this. From what I understand I do not need to root the tablet first if I am going to flash a rom straight onto it.
So does anyone have a favorite method for going from a stock Nook Tablet to CM7 or CM10? I also wonder whether it is easier to use Windows or a linux OS to do this. I have Ubuntu on my Desktop and Windows 7 on my laptop so I can do either one. Also, how do you create a clone or image of my Nook and SD card so that I can revert back to them if anything goes wrong?
Edit: Do I need to repartition the NT hard disk like explained here:http://forum.xda-developers.com/showthread.php?p=23272909#post23272909 or does that no longer matter once the new Rom has been installed?
Click to expand...
Click to collapse
Since you're new to flashing ROMs you might want to use this
http://iamafanof.wordpress.com/2012/11/18/cm10-0-jellybean-sdcard-img-for-nook-tablet/
Its an SDC image. Just write to your SD card and you're good to go. Once you learn a little more you can internally flash. Flashing without knowing what you're doing may cause problems which could essentially reformat or erase internal partitions.
Edit: You can use whatever operating system you want. Ubuntu can read all your partitions though. Windows can only read some. But that probably won't matter if you're new.
Thank you so very much. That was incredibly easy. Now I'm going to spend the rest of the evening messing around with this and finding out what I should have been doing all along with this tablet.

Categories

Resources