hi place helpme my sony tablet s model SGPT111MX/S is briked
the log file is in attachment
place @stifilz helpme
abervera said:
hi place helpme my sony tablet s model SGPT111MX/S is briked
the log file is in attachment
place @stifilz helpme
Click to expand...
Click to collapse
Try 0042 here http://www.4shared.com/zip/m-xXuCCv/signed-nbx03_001-ota-0042001.html
dont work
after to end the process is freezed the sony screen when i reset the tablet an again is bricked in the black screen
the log file is in attachment
help me @stifilz
abervera said:
after to end the process is freezed the sony screen when i reset the tablet an again is bricked in the black screen
the log file is in attachment
help me @stifilz
Click to expand...
Click to collapse
Try factory reset (will not delete files on internal SD) and then install again
stifilz said:
Try factory reset (will not delete files on internal SD) and then install again
Click to expand...
Click to collapse
Don't work the same thing happened
stifilz said:
Try factory reset (will not delete files on internal SD) and then install again
Click to expand...
Click to collapse
works !!!!! Thank you! :victory::good:
Hi i have the same problem but i can't see the zip when i go into recovery can someone tell me why??
my tablet is stuck in the sony logo please help D=
i already use the factory reset but still not working
Related
Can anyone please help me with this? I have HTC Sensation with CM10. This tablet without root is uselles...
Anyone?
How did you put CM10 on it without root?
post-mortem said:
How did you put CM10 on it without root?
Click to expand...
Click to collapse
Read carefully what I wrote.
I have HTC Sensation with cm10. Its my dailly driver.
Goclever R75 i bought becouse it was cheap But what is android without root? And I cant get any information about that on this tablet...
No one know how to do that?
Okay
I have root
First U must turn on debuging mode and unknown sources.
then connect tablet to PC and install drivers from package in atachments.
Then double click on "ICS_Root_Unlocker.bat" and follow instructions!
is it function? no problems?
Yes this works. Ive done this 2 times
Hi! Can you please tell me how to instal drivers from that package?
If u dont know how 2 do that... Please do not root your device!
devgron said:
If u dont know how 2 do that... Please do not root your device!
Click to expand...
Click to collapse
Hi again, thanks for your concern but it's not my first time when a try to root a device. I have a sony x8 rooted and a rom on it but never needed to instal something like that to root so can you please tell me how do i get over that spep? Sorry for my english.
devgron said:
Okay
I have root
First U must turn on debuging mode and unknown sources.
then connect tablet to PC and install drivers from package in atachments.
Then double click on "ICS_Root_Unlocker.bat" and follow instructions!
Click to expand...
Click to collapse
I just hoped I haven't bricked my R75
It all went as it should until I ran ICS_Root_Unlocker.bat. It kept reporting device not found and than tablet rebooted itself. Logo of ICS appeared but after that it went totally blank. I could still use ADB to access tablet. All adb options that I tried worked - get state, etc. So I tried adb reboot bootloader and after ICS logo I got red triangle with exclamation mark. As I don't have volume up/down as physical buttons I am stuck - I can not access Android system recovery menu. Hardware usb keyboard works - I can reboot with tablet with it, for example. If I connect tablet to PC it is not recognized anymore. Any idea on what to do?
Kurjak78 said:
I just hoped I haven't bricked my R75
It all went as it should until I ran ICS_Root_Unlocker.bat. It kept reporting device not found and than tablet rebooted itself. Logo of ICS appeared but after that it went totally blank. I could still use ADB to access tablet. All adb options that I tried worked - get state, etc. So I tried adb reboot bootloader and after ICS logo I got red triangle with exclamation mark. As I don't have volume up/down as physical buttons I am stuck - I can not access Android system recovery menu. Hardware usb keyboard works - I can reboot with tablet with it, for example. If I connect tablet to PC it is not recognized anymore. Any idea on what to do?
Click to expand...
Click to collapse
Hi, I have same problem. Did you get fix for this??
zefer79 said:
Hi, I have same problem. Did you get fix for this??
Click to expand...
Click to collapse
No. Fortunately I was able to exchange it for the new one.
Kurjak78 said:
No. Fortunately I was able to exchange it for the new one.
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Bye.
orlairet conde
I have R75. It would be great if you could upload rooted version to sendspace. Thank you.
bugxyz said:
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Bye.
Click to expand...
Click to collapse
Kurjak78 said:
I have R75. It would be great if you could upload rooted version to sendspace. Thank you.
Click to expand...
Click to collapse
Hello!
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.
WIFI not working and sensor keys bad workimg
bugxyz said:
Hello!
This is the link for R75 rooted firmware.
xxxx
I hope it helps you.
Bye.
Click to expand...
Click to collapse
:/ after install to "bricked" goclever tab r75 android from link xxx provided by bugxyz android run. .. wifi not working and senzor keys are shifted please help me :/ sorry for my bad english i am czech and the screen is shifted
Hello.
If you have those problems it means that you have an goclever tab 7500 and not an R 75. I saw that some contries 7500 was sold as R 75.
I had the same problem as you when I have flashed my R 75 with 7500 firmware.
I will upload also the 7500's firmware and provide the link when it is uploaded.
I hope this will help you.
Ps: 7500 firmware is unrooted.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.
Sent from my LG-P990 using Tapatalk
thx
Thank you very much, it helped. how should I do to make me root it got broken again
declara kvide
bugxyz said:
Hello!
This is the link for R75 rooted firmware.
I hope it helps you.
Bye.
Click to expand...
Click to collapse
Bugxyz, you are a savior. Thank you.
i have purchased my aigopad m60 from bangkok. After 3 months, it is stuck on 'A' logo and doesnot go further. I tried hard reset using various key combinations but NO success.
Please help me getting my tab back to normal...
aigoPad m60
karan_1317 said:
i have purchased my aigopad m60 from bangkok. After 3 months, it is stuck on 'A' logo and doesnot go further. I tried hard reset using various key combinations but NO success.
Please help me getting my tab back to normal...
Click to expand...
Click to collapse
try flashing the original firmware
you can download it from aigoPad thailand
aigo.co.th/en/node/123
Click to expand...
Click to collapse
don't worry about the language
just extract the file
there's a readme/help doc file in there
just follow the steps carefully
(you'll need a microSD card preferable 2Gb)
jalokamaniac said:
try flashing the original firmware
you can download it from aigoPad thailand
don't worry about the language
just extract the file
there's a readme/help doc file in there
just follow the steps carefully
(you'll need a microSD card preferable 2Gb)
Click to expand...
Click to collapse
if i want a custom rom for aigopad m60 can?and where to find it? becoz i've googled enough...and hopeless to find a custom rom for aigopad m60...
Works great but can't use adb debugging anymore
jalokamaniac said:
try flashing the original firmware
you can download it from aigoPad thailand
don't worry about the language
just extract the file
there's a readme/help doc file in there
just follow the steps carefully
(you'll need a microSD card preferable 2Gb)
Click to expand...
Click to collapse
I used PhoenixCard to flash the image onto my aigopad m60 and I boots up great. But I can no longer connect with adb(yes I have usb debugging turned on, and it did work before things went bad).
Is anyone else having this same problem?
Anyone have any hints on how to resolve it?
any thoughts/help on this would be greatly appreciated.
Hi guys,
I was following this guide to upgrade my Sanei n10: http://forum.xda-developers.com/showthread.php?t=1821398
In recovery mode I have installed the rom.zip, but after I pressed the wrong button and it turned off.
Now, when I turn it on, leave the writing sanei and after few second remains on black screen.
If I try to entry in recovery mode with the vol+ button, it remains with the Android robot lying down with a red tiangolo, with no options.
What can I do to recover my tablet?
Thanks to all
---
Driver
idulkoan said:
instead of reflashing the rom, to get this device to boot you will probably have to reflash the sanei. This can be done with livesuit.
Click to expand...
Click to collapse
I can not find a driver that works ... Can you help me?
---
idulkoan said:
try these drivers:
Click to expand...
Click to collapse
Nothing... It doesn't work..
---
idulkoan said:
do you have skype? i can try to help you out through that
then if we get a solution ill post it here for the rest of xda to see lol
Click to expand...
Click to collapse
I have Skype, could you plz help me ?
Thanks in advance
Nrupesh
---
idulkoan said:
do you have skype? i can try to help you out through that
then if we get a solution ill post it here for the rest of xda to see lol
Click to expand...
Click to collapse
Hello,
I'm sorry for the time that has passed, I had to do ...
I'm back to grips with my Sanei N10 ... I also formatted the PC, but the drivers do not work!!
Thank you for your help!
---
idulkoan said:
What displays on the computer when you enter your sanei n10 into "flash mode" ? [When trying to flash it with livesuit]
Click to expand...
Click to collapse
the problem is that the pc don't recognizes the tablet.
when i plug in the usb cable, windows find a new device but don't install the drivers... I have tried with the file in the previous post but don't work...
I have a general device called "Android" without drivers...
then, livesuite or another software don't recognizes the tablet...
What I have to to?
up
hmm
---
*This guide is for getting back alive a phone from soft brick issue*
*Note: I am not responsible for any kind of damage to your phone.*
*Because whatever is done, is done by you*
*Just follow the instructions properly*
Firstly download & extract MT6577 USB VCOM drivers.zip and install the mt6577 usb vcom drivers.
http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar
Get the zip of flashing tool and rom from here
------Updated------
https://docs.google.com/uc?id=0B2z1OF_bgqI1UUJWUmEyNGY5R2M&export=download
Now you are ready move on for the upcoming process.
1. Now Extract the A25 zip.
2. Then go into the extracted A25 folder and open the flash files folder.
3. Then open flash_tool.exe from it.
4. Select scatter loading
5. Go inside the extracted folder of A25 folder and go inside the rom folder and select MT6577_Android_scatter.txt
6. Select SEC_RO, Select LOGO, Select ANDROID Select USERDATA.(unselect all others)
*Update(and select userdata also for google play store to work)*
PRELOADER & DSP_BL flashing is very dangerous never select it until you are an expert and know about it.
7. As you select the scatter text the software gets all the necessary files that are needed for flashing, it’s because they are in the same folder, so now we can directly continue towards main flashing.
Main flashing
1. Firstly make sure your phone’s battery is at least 50% charged.
2. Make sure your usb cable is ok.
3. (Confirmation) this guide is for softbrick phones.
Now when you are totally ready.
1. Remove the battery of the phone.
2. Connect your phone with usb cable and connect it with your computer.(with removed battery) (Do Not Insert Battery Yet)
3. Keep the phone connected only. (with no battery)
4. Now click the download button on the software flash tool.
5. When you will click download it will load the files, the download is not started yet.(so don’t panic)
6. Now in seconds it will load files and it will wait for your phone to connect, it will show searching.
7. So now its time for flashing.
Now insert the battery and the software will start flashing immediately, while flashing do not make any mistake of removing cable, or else it may hard brick your phone, the download will start if there are no other issues, and total flashing time would be 6 or 10 minutes.
If the flashing went all ok, with no problems then it will show Download Ok.(preview down)
8. Now finally disconnect the phone from the usb cable and remove and re-insert the battery, and power it on, Happy Flashing :angel:
Guide By Naineesh Rathod
Fb.com/naineeshvrathod
XDA Name - NaineeshPlease hit thanks if it helped
thanx man
dude I thought that there was no hope bringing my a25 back but you did i t yaar thanx
asad rocker said:
dude I thought that there was no hope bringing my a25 back but you did i t yaar thanx
Click to expand...
Click to collapse
You are welcome,...... :angel:
hard bricked karbonn A25
After flashing the new updated stock rom on my karbonn A25 ,it is hard bricked now its not working showing black screen
The rom i Have downloaded from Android.xda site version 8.something please help.
thanks in advance.
Sorry for late reply.
jjena said:
After flashing the new updated stock rom on my karbonn A25 ,it is hard bricked now its not working showing black screen
The rom i Have downloaded from Android.xda site version 8.something please help.
thanks in advance.
Click to expand...
Click to collapse
I need to uplaod it, i have the working one
link updated
jjena said:
After flashing the new updated stock rom on my karbonn A25 ,it is hard bricked now its not working showing black screen
The rom i Have downloaded from Android.xda site version 8.something please help.
thanks in advance.
Click to expand...
Click to collapse
Link updated!!!
https://docs.google.com/uc?id=0B2z1OF_bgqI1UUJWUmEyNGY5R2M&export=download
all links are working
Adriel David said:
Sir,I cant download the files please upload them on mediafire and give me the link after uploading
Click to expand...
Click to collapse
All links shown up there are working ones
if you still face problem, tell me, i will upload it somewhere else.
Naineesh said:
All links shown up there are working ones
if you still face problem, tell me, i will upload it somewhere else.
Click to expand...
Click to collapse
Bro the links dead could u help me with the firmware plss...
mine is
karbonn A25
H/W:S58RM8_VO.2
S/W: V8089B0401
Vishnu2694 said:
Bro the links dead could u help me with the firmware plss...
mine is
karbonn A25
H/W:S58RM8_VO.2
S/W: V8089B0401
Click to expand...
Click to collapse
Link is working fine no issues.
https://docs.google.com/uc?id=0B2z1OF_bgqI1UUJWUmEyNGY5R2M&export=download
Vishnu2694 said:
Bro the links dead could u help me with the firmware plss...
mine is
karbonn A25
H/W:S58RM8_VO.2
S/W: V8089B0401
Click to expand...
Click to collapse
@Vishnu2694 if still links are not working for you pm me on facebook.
www.facebook.com/naineeshvrathod
Vishnu2694 said:
Bro the links dead could u help me with the firmware plss...
mine is
karbonn A25
H/W:S58RM8_VO.2
S/W: V8089B0401
Click to expand...
Click to collapse
@Vishnu2694 if still links are not working for you pm me on facebook.
www.facebook.com/naineeshvrathod
Hi Guys
Sorry For My English ...
my phone hard bricked and it's not open
i follow one of threads here .. and i download the debrick.img for i9205 because i cannot make it
and flashed it in micro sd and my phone open samsung galaxy mega logo with green writing top left Set Warranty Bit : kernel
and 2 lines red and restart, only doing this
and i can access download mode but i cannot accses recovery mode
I tried reflashing stock rom with ODIN, I got the PASSED green message , but the phone still stuck on boot loop.
and i install twrp and cwm recovery but my recovery doesn't open
and when i remove the micro sd my phone it's not open .. and when i put it my phone open
Please help I can't use the phone at all.
debrick.img
Hi man, I have the same exact problem. Except, I didn't have access to the debrick.img yet. Can you share it with me? Thanks in advance!
saddah said:
Hi Guys
i follow one of threads here .. and i downloaded the debrick.img for i9205 because i cannot make it
(
Click to expand...
Click to collapse
debrick.img
JoooostB said:
Hi man, I have the same exact problem. Except, I didn't have access to the debrick.img yet. Can you share it with me? Thanks in advance!
Click to expand...
Click to collapse
the debrick.img here
http://www.mediafire.com/download/32x34l6secb6zc2/debrick.img
and follow the steps here
http://forum.xda-developers.com/showthread.php?t=2591176