Hello,
I have followed a tutorial to install a custom ROM (bootloader locked) on my Sony Xperia Arc S, the last Jelly Dream ROM.
But at the end of the operation, after the reboot, the smartphone gets stuck on the sony logo.
Is there a way to fix this issue?
Thank you in advance.
Refresh an ftf with full wipe or just use PC companion, connect your phone in flash mode and use repair option. Start over again with your rom flashing.
Wysłane z mojego C6903 przy użyciu Tapatalka
olokos said:
Refresh an ftf with full wipe or just use PC companion, connect your phone in flash mode and use repair option. Start over again with your rom flashing.
Click to expand...
Click to collapse
Thank you it worked, I've used the Flashtool, but on my linux partition, on windows 8 there are several problems with drivers...etc.
Thank's a lot for your quick answer bros!
Related
My xperia ray is breaked bootloader.
What can i do?
Where can I download boot loader for xperia ray?
Do you have acces to the download mode ?
If yes use PC Compagnion or a FTF (the .587) is recomended
try to repair it with sony update service
paolinhos said:
try to repair it with sony update service
Click to expand...
Click to collapse
I wouldn't recommend that. If you tried to unlock it and you broke it, it might hard-brick your device...
Try Flashtool and flash a FTF.
I know to access download mod for Xperia Ray(hold volume down key+plug in usb with pc)
1. I try use Sony PC Compagnion to repair and finish success with rom 4.1.B.0.587 but my phone can not open just vibrate only.
2. I use Flash tool to flash the rom(ST18i_Ray_ICS_4.0.4-4.1.B.0.587_Generic_Nordic_1252-5332.ftf ) success too but my phone can not open just vibrate only too.
Sorry my english is bad.
ysambo said:
I know to access download mod for Xperia Ray(hold volume down key+plug in usb with pc)
1. I try use Sony PC Compagnion to repair and finish success with rom 4.1.B.0.587 but my phone can not open just vibrate only.
2. I use Flash tool to flash the rom(ST18i_Ray_ICS_4.0.4-4.1.B.0.587_Generic_Nordic_1252-5332.ftf ) success too but my phone can not open just vibrate only too.
Sorry my english is bad.
Click to expand...
Click to collapse
you got your xray hardbrick, because you use the PC companion update..
is not recomended when you have a Unlocked Bootloader
I don't know how to fix it
ysambo said:
My xperia ray is breaked bootloader.
What can i do?
Where can I download boot loader for xperia ray?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1492805&highlight=hardbricked
So I am trying to follow http://forum.xda-developers.com/showthread.php?t=2085344 this tutorial to unbrick, but I believe my debugging mode is off and since I can't boot into the phone, the KDZ flash gets stuck at 15%. Any ideas on what to do?
Do You connect phone in software update mode (w/o battery press vol-up and connect usb, than connect battery)?
dreamnewbie said:
Do You connect phone in software update mode (w/o battery press vol-up and connect usb, than connect battery)?
Click to expand...
Click to collapse
Yes I tried this. It doesn't work. Stops at 15%. Says the phone isn't connected even though it is.
If the phone can run update mode than it's not bricked (correct me please if i am wrong). I had some issues lately with recovering firmware on windows 8.1 and finally i did this on w7. Maybe try other pc?
Wysłane z mojego LG-P760 przy użyciu Tapatalka
dreamnewbie said:
If the phone can run update mode than it's not bricked (correct me please if i am wrong). I had some issues lately with recovering firmware on windows 8.1 and finally i did this on w7. Maybe try other pc?
Wysłane z mojego LG-P760 przy użyciu Tapatalka
Click to expand...
Click to collapse
It can get into S/W upgrade mode perfectly fine. I am doing this on a Windows 7 but I will try my windows 8 ASAP
install drivers, connect LG in SW mode - 3 devices should be installed, than go with update with lgmobile support tool.
dreamnewbie said:
install drivers, connect LG in SW mode - 3 devices should be installed, than go with update with lgmobile support tool.
Click to expand...
Click to collapse
I just got through trying it multiple times with the same phone not connected error.
Flash ics xloader and uboot. You should be good to go then. I did the same thing.
noob.gamer said:
Flash ics xloader and uboot. You should be good to go then. I did the same thing.
Click to expand...
Click to collapse
With this tool? http://forum.xda-developers.com/showthread.php?t=2601480
I tried and it continues to say device not found. Do I go into S/W upgrade mode?
No not that tool. Use lelus script for flashing those files in fastboot and then go into s/w upgrade.
Sent from my Amazon OtterX using Tapatalk
Hackjab said:
So I am trying to follow http://forum.xda-developers.com/showthread.php?t=2085344 this tutorial to unbrick, but I believe my debugging mode is off and since I can't boot into the phone, the KDZ flash gets stuck at 15%. Any ideas on what to do?
Click to expand...
Click to collapse
Im actually in the same boat right now. Mind telling me what you did or if you solved it yet cause im really stuck please help?
noob.gamer said:
No not that tool. Use lelus script for flashing those files in fastboot and then go into s/w upgrade.
Sent from my Amazon OtterX using Tapatalk
Click to expand...
Click to collapse
Hey,I was having this exact same problem and I did what you said and got the fastboot drivers.Now when I try to flash a rom it passes 15%,but disconnects somewhere around along the way(after the analysis that is).I've noticed that when this happens my phones sceen goes from S/W mode to a blank screen(or maybe it's turned off). In any case,I disconnect my phone when this happens and do the steps to put it back into S/W mode and click Restart and it just keeps giving me that same error.When I start anew after putting the phone back into S/W mode it does the same exact thing at perhaps a different percentage and/or a different stage.Any ideas?Also,one time the screen on my phone stayed on throughout the entire process up until 96% of the final stage and it turned off,but it still continued to 100% and gave me the completion screen.Any thoughts about what I can do?So far I'm just doing this again and again,seeing if maybe one time it won't disconnect on me.
Edit: I just did what this link http://forum.xda-developers.com/showthread.php?t=2119090 told me to do.Was I supposed to do something else?
Hi EveryOne
I Have A Xperia Z Ultra C6833
I Install On It Samsung Smart View 2.0 And It's Work Fine
After A Little While The Phone Didn't Responding
So I Do A Force Off
And When I Turned On It's Stuck On Boot Or Stuck On Android Is Starting : Apps Starting
Thank You
M4Gaming said:
Hi EveryOne
I Have A Xperia Z Ultra C6833
I Install On It Samsung Smart View 2.0 And It's Work Fine
After A Little While The Phone Didn't Responding
So I Do A Force Off
And When I Turned On It's Stuck On Boot Or Stuck On Android Is Starting : Apps Starting
Thank You
Click to expand...
Click to collapse
Idk....I doubt that would cause it to get stuck on boot.
You can use flashtool and flash a stock ftf it will fix your problem.
RealityFails said:
Idk....I doubt that would cause it to get stuck on boot.
You can use flashtool and flash a stock ftf it will fix your problem.
Click to expand...
Click to collapse
Can You Help Me With A Full Tutorial
Thank You
1. Download and install Sony Flashtool.
2. Download and install any drivers for the XZU if necessary.
3. Turn off the phone.
4. Make sure that the micro-USB cable is plugged into the computer first.
5. Hold down the volume down button and then plug into computer.
6. Get the stock TFT file.
7. Locate it using flash tool.
8. Flash it.
If you need further help then feel free to PM me.
http://forum.xda-developers.com/showthread.php?t=2428319
You can follow this tutorial.
If you're on windows 8 or above you'll need to disable driver signature verification so the drivers install.
Not sure what country you're from but this is for the c6086
https://drive.google.com/file/d/0Bzw60GDuSVWzZ1ptMlBDSnYyemM/view?pref=2&pli=1
M4Gaming said:
Hi EveryOne
I Have A Xperia Z Ultra C6833
I Install On It Samsung Smart View 2.0 And It's Work Fine
After A Little While The Phone Didn't Responding
So I Do A Force Off
And When I Turned On It's Stuck On Boot Or Stuck On Android Is Starting : Apps Starting
Thank You
Click to expand...
Click to collapse
Use pc companion bro... Do reset it will works...... :good:
TheGoldenMagikhrp said:
1. Download and install Sony Flashtool.
2. Download and install any drivers for the XZU if necessary.
3. Turn off the phone.
4. Make sure that the micro-USB cable is plugged into the computer first.
5. Hold down the volume down button and then plug into computer.
6. Get the stock TFT file.
7. Locate it using flash tool.
8. Flash it.
If you need further help then feel free to PM me.
Click to expand...
Click to collapse
Thank You Dude It's Work
Hi,when I connect phone to pc in twrp i see i device menager this device.When i wanna install driver adb windows say "Can't install this drivers,or not for this device"Please help me
try to install kingo root (for windows) it installed the needed drivers directly.after it just remove the software
You connect your phone to pc when you're in recovery? I hadn't done it ever
Wysłane z mojego E2303 przy użyciu Tapatalka
My Xiaomi AmazFit STRATOS is no longer recognized by the PC, I removed something and I can no longer make it recognized by adb, is there any solution to this?
Not to mention that when I send factory reset it shuts off and restarts. It is not recognized by the bluetoothh of the cell phone tbm.
The last update it, recognizes low and reboots but does not install.
I do not know what else to do ... the call button also simply stopped.
Did you try on another computer ?
Wysłane z mojego BLA-L29 przy użyciu Tapatalka