My Xiaomi AmazFit STRATOS is no longer recognized by the PC, I removed something and I can no longer make it recognized by adb, is there any solution to this?
Not to mention that when I send factory reset it shuts off and restarts. It is not recognized by the bluetoothh of the cell phone tbm.
The last update it, recognizes low and reboots but does not install.
I do not know what else to do ... the call button also simply stopped.
Did you try on another computer ?
Wysłane z mojego BLA-L29 przy użyciu Tapatalka
Related
Hello,
I have followed a tutorial to install a custom ROM (bootloader locked) on my Sony Xperia Arc S, the last Jelly Dream ROM.
But at the end of the operation, after the reboot, the smartphone gets stuck on the sony logo.
Is there a way to fix this issue?
Thank you in advance.
Refresh an ftf with full wipe or just use PC companion, connect your phone in flash mode and use repair option. Start over again with your rom flashing.
Wysłane z mojego C6903 przy użyciu Tapatalka
olokos said:
Refresh an ftf with full wipe or just use PC companion, connect your phone in flash mode and use repair option. Start over again with your rom flashing.
Click to expand...
Click to collapse
Thank you it worked, I've used the Flashtool, but on my linux partition, on windows 8 there are several problems with drivers...etc.
Thank's a lot for your quick answer bros!
So I am trying to follow http://forum.xda-developers.com/showthread.php?t=2085344 this tutorial to unbrick, but I believe my debugging mode is off and since I can't boot into the phone, the KDZ flash gets stuck at 15%. Any ideas on what to do?
Do You connect phone in software update mode (w/o battery press vol-up and connect usb, than connect battery)?
dreamnewbie said:
Do You connect phone in software update mode (w/o battery press vol-up and connect usb, than connect battery)?
Click to expand...
Click to collapse
Yes I tried this. It doesn't work. Stops at 15%. Says the phone isn't connected even though it is.
If the phone can run update mode than it's not bricked (correct me please if i am wrong). I had some issues lately with recovering firmware on windows 8.1 and finally i did this on w7. Maybe try other pc?
Wysłane z mojego LG-P760 przy użyciu Tapatalka
dreamnewbie said:
If the phone can run update mode than it's not bricked (correct me please if i am wrong). I had some issues lately with recovering firmware on windows 8.1 and finally i did this on w7. Maybe try other pc?
Wysłane z mojego LG-P760 przy użyciu Tapatalka
Click to expand...
Click to collapse
It can get into S/W upgrade mode perfectly fine. I am doing this on a Windows 7 but I will try my windows 8 ASAP
install drivers, connect LG in SW mode - 3 devices should be installed, than go with update with lgmobile support tool.
dreamnewbie said:
install drivers, connect LG in SW mode - 3 devices should be installed, than go with update with lgmobile support tool.
Click to expand...
Click to collapse
I just got through trying it multiple times with the same phone not connected error.
Flash ics xloader and uboot. You should be good to go then. I did the same thing.
noob.gamer said:
Flash ics xloader and uboot. You should be good to go then. I did the same thing.
Click to expand...
Click to collapse
With this tool? http://forum.xda-developers.com/showthread.php?t=2601480
I tried and it continues to say device not found. Do I go into S/W upgrade mode?
No not that tool. Use lelus script for flashing those files in fastboot and then go into s/w upgrade.
Sent from my Amazon OtterX using Tapatalk
Hackjab said:
So I am trying to follow http://forum.xda-developers.com/showthread.php?t=2085344 this tutorial to unbrick, but I believe my debugging mode is off and since I can't boot into the phone, the KDZ flash gets stuck at 15%. Any ideas on what to do?
Click to expand...
Click to collapse
Im actually in the same boat right now. Mind telling me what you did or if you solved it yet cause im really stuck please help?
noob.gamer said:
No not that tool. Use lelus script for flashing those files in fastboot and then go into s/w upgrade.
Sent from my Amazon OtterX using Tapatalk
Click to expand...
Click to collapse
Hey,I was having this exact same problem and I did what you said and got the fastboot drivers.Now when I try to flash a rom it passes 15%,but disconnects somewhere around along the way(after the analysis that is).I've noticed that when this happens my phones sceen goes from S/W mode to a blank screen(or maybe it's turned off). In any case,I disconnect my phone when this happens and do the steps to put it back into S/W mode and click Restart and it just keeps giving me that same error.When I start anew after putting the phone back into S/W mode it does the same exact thing at perhaps a different percentage and/or a different stage.Any ideas?Also,one time the screen on my phone stayed on throughout the entire process up until 96% of the final stage and it turned off,but it still continued to 100% and gave me the completion screen.Any thoughts about what I can do?So far I'm just doing this again and again,seeing if maybe one time it won't disconnect on me.
Edit: I just did what this link http://forum.xda-developers.com/showthread.php?t=2119090 told me to do.Was I supposed to do something else?
Hi,when I connect phone to pc in twrp i see i device menager this device.When i wanna install driver adb windows say "Can't install this drivers,or not for this device"Please help me
try to install kingo root (for windows) it installed the needed drivers directly.after it just remove the software
You connect your phone to pc when you're in recovery? I hadn't done it ever
Wysłane z mojego E2303 przy użyciu Tapatalka
guys i have big problem.
I flash this rom via twrp and add to the tree su and some other files like xpose.
After that I have brick my device.
When I push power it shows only for 1 s miui logo and after that red led is blinking.
When i plug it to my computer it shows that it couldn`t recognize the usb driver, when i go to the menager it shows that it is decrypted).
I could turn on fastboot mode but it not helping beacuse my comp doesn`t see device in fastoob/adb mode.. (i have good drivers - i do a lot of diferent flash by fastboot).
Maybe you have some advice for my problem. I loose TWRP ;( .....
I trie to disconect battery (open the body) but it not help.
Please hepl me!
http://www.tinypic.pl/y2rjc02j3h7u
Dinosek said:
guys i have big problem.
I flash this rom via twrp and add to the tree su and some other files like xpose.
After that I have brick my device.
When I push power it shows only for 1 s miui logo and after that red led is blinking.
When i plug it to my computer it shows that it couldn`t recognize the usb driver, when i go to the menager it shows that it is decrypted).
I could turn on fastboot mode but it not helping beacuse my comp doesn`t see device in fastoob/adb mode.. (i have good drivers - i do a lot of diferent flash by fastboot).
Maybe you have some advice for my problem. I loose TWRP ;( .....
I trie to disconect battery (open the body) but it not help.
Please hepl me!
Click to expand...
Click to collapse
This might help you http://en.miui.com/thread-235865-1-1.html
http://en.miui.com/thread-274589-1-1.html good luck
bigest problem i think is that that my computer can`t recognize phone. all the that it show that he can`t recognize usb. device.
even I want to use test point method but it doesn`t work for me I think - I want to connect first and last pin (it`s correct??)
in my device menager i have
http://www.tinypic.pl/y2rjc02j3h7u
I try I think every thing. With my computer and another. Bouth of them doesn`t recognize phone. I could only go to the fastoboot mode but comp don`t see it.
I try even deep flash...
Try to install driver mi
Sent from my Redmi Note 3 using Tapatalk
What I do
Change computer , reinstall drivers, unsuscribe drivers
Disconnect battery, di the test point
The bigest problem I thing right know I that that any computer doesn't see it. I do not understand why I always shows unknown device and info about description problem. I check it in one computer that one company change systems in selling xiaomi ( for sure good drivers)
I rescue my phone. What happend. I don't know how but my USB port was broken after last flashing by twrp. I change USB port and miflash start to see my device (funny is that computer doesn't saw it).
I unlock my device and flash in miflash stable miui.
Wysłane z mojego Redmi Note 3 przy użyciu Tapatalka
hello guys , need very much your all help to get up ( resurect?) my phone
i was flashing this ROM https://forum.xda-developers.com/ma...nt/rom-emui-8-0-kangvip-mate-10-lite-t3784834
and installed their kernel and tuning camera p20 pro , installation was finished, then i wiped cache and clicked button Reboot , and ....................... nothing till now, Black screen , buttoms not respons , was trying clicking and still nothing
Black screen
buttons dosent responds , volume up and down , and power
i trying with connecting cabble , TWRP , recovery and other stuffs.. nothing
any suggests ?
xydonis said:
hello guys , need very much your all help to get up ( resurect?) my phone
i was flashing this ROM https://forum.xda-developers.com/ma...nt/rom-emui-8-0-kangvip-mate-10-lite-t3784834
and installed their kernel and tuning camera p20 pro , installation was finished, then i wiped cache and clicked button Reboot , and ....................... nothing till now, Black screen , buttoms not respons , was trying clicking and still nothing
Black screen
buttons dosent responds , volume up and down , and power
i trying with connecting cabble , TWRP , recovery and other stuffs.. nothing
any suggests ?
Click to expand...
Click to collapse
Does pc recognize phone?
Fastboot is working?
If pc recognize phone as usb-ser there is no fix.....
Enviado de meu BLA-L29 usando o Tapatalk
ChaseRxx said:
Does pc recognize phone?
Fastboot is working?
If pc recognize phone as usb-ser there is no fix.....
Enviado de meu BLA-L29 usando o Tapatalk
Click to expand...
Click to collapse
Fastboot not,
when i connect phone to pc there is only sound of windows ( alert of new device , mass storage ) but there is no any other windows information , MY PC dosent see phone and SD Card
phone completly dead ? what shall i do ?
xydonis said:
Fastboot not,
when i connect phone to pc there is only sound of windows ( alert of new device , mass storage ) but there is no any other windows information , MY PC dosent see phone and SD Card
phone completly dead ? what shall i do ?
Click to expand...
Click to collapse
How does the device appear in Device Manager
Enviado de meu BLA-L29 usando o Tapatalk
ChaseRxx said:
How does the device appear in Device Manager
Enviado de meu BLA-L29 usando o Tapatalk
Click to expand...
Click to collapse
not showing in device manager , its like ghost mode , only sound from Windows playing Device Connect Sound thats all
Hello.
I have the same problem on my Mate 10 Lite, after flashing firmware i have a black screen and when i connect phone to pc it shows me "fastboot 2.0" and i can working with fastboot.
Reset of the phone is working too because when is connected to computer and i`m pushing power+vol up windows is showing reconnected but when reset is finished still is in fastboot mode but i don`t see it on screen because is black.
Can i do something with that ? Maybe huawei service is needed? My phone is dead and still has warranty - i think…..
wojtekml said:
Hello.
I have the same problem on my Mate 10 Lite, after flashing firmware i have a black screen and when i connect phone to pc it shows me "fastboot 2.0" and i can working with fastboot.
Reset of the phone is working too because when is connected to computer and i`m pushing power+vol up windows is showing reconnected but when reset is finished still is in fastboot mode but i don`t see it on screen because is black.
Can i do something with that ? Maybe huawei service is needed? My phone is dead and still has warranty - i think…..
Click to expand...
Click to collapse
I listened about dc phoenix, but it cost money for flash firmware with and without bootloader unlocked, it cost 15 euros for 72 hours after the initial flashing, maybe it works or no, i don't know exactly but good luck if you test it!
Ok phone back to me from huawei client center and has replaced battery with screen and mainboard….. has a new imei and its a new mate 10 lite.
At this time i have only rooted system and trwp recovery installed.
And i`m waiting for roms to flash by twrp.
Best regards