Related
Hello,
I have Jiayu G3 which is bricked, it is completely dead, cannot power on, no charging, no recovery....
so i need help please, i also tried this: With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds.
but this is not working because my pc does not detects it....
so please i need other solution or how to find test points on Jiayu g3 ?
thank you !!!
chief_wolfinjo said:
Hello,
I have Jiayu G3 which is bricked, it is completely dead, cannot power on, no charging, no recovery....
so i need help please, i also tried this: With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds.
but this is not working because my pc does not detects it....
so please i need other solution or how to find test points on Jiayu g3 ?
thank you !!!
Click to expand...
Click to collapse
hi how did you brick your G3?
mine is semi-brick, I was updating Lewa OTA then when iot rebooted the screen was like just snow on a TV Set
I took out the battery then now it just stays at the Lewa Logo.
I'm trying SP flash method but still no go
give this a shot
https://plus.google.com/113031144280405994468/posts/Td1SNjjZWaN
http://forum.xda-developers.com/showthread.php?t=1943442
mengfei said:
hi how did you brick your G3?
mine is semi-brick, I was updating Lewa OTA then when iot rebooted the screen was like just snow on a TV Set
I took out the battery then now it just stays at the Lewa Logo.
I'm trying SP flash method but still no go
give this a shot
https://plus.google.com/113031144280405994468/posts/Td1SNjjZWaN
http://forum.xda-developers.com/showthread.php?t=1943442
Click to expand...
Click to collapse
Hi
thank you for the reply, but this unfortunately did not help, my G3 just wont power up
maybe with test points it will power up... but i dont which one to use on motherboard
thank you
chief_wolfinjo said:
Hi
thank you for the reply, but this unfortunately did not help, my G3 just wont power up
maybe with test points it will power up... but i dont which one to use on motherboard
thank you
Click to expand...
Click to collapse
try SP Flash method that needs NO battery
http://techideki.com/how-to-root-jiayu-g3-working-recovery-mode/
http://vondroid.com/threads/cwm-recovery-jiayu-g3.4837/
http://androidunbricked.blogspot.com/2013/06/unbrick-your-mtk6577-android-mobile.html
just got my G3 up & running again via SP Flashtool, important thing is that you must have the drivers installed
http://www.needrom.com/tutorial-mt657x-flashing/
mengfei said:
just got my G3 up & running again via SP Flashtool, important thing is that you must have the drivers installed
http://www.needrom.com/tutorial-mt657x-flashing/
Click to expand...
Click to collapse
thank you
I will try that today when i come home.
otherwise Do you know which test points will power up ?
Hi I have the Jiayu g3s which is the quad core variant. I have my phone too but it boots up and goes until the boot logo where it freezes please help
revive JIAYU G3S(G3T)
I BRICKED MY PHONE USING A ROM NOT PROPER FOR MY DEVICE JIAYU G3S(G3T). AFTER THIS, THE PHONE WON'T CHARGE, WON'T START, IT WAS DEAD. BUT AFTER HOURS SPENT SERCHING ON THE INTERNET, I WAS ALLOWED TO FIND WHAT I NEEDED TO REVIVE MY PHONE: ROM "JY-G3-20130523-102107" UNDER "SP_Flash_Tool_v3.1332.0.187". IN WINXP AFTER INSTALLING DRIVERS, MY DEVICE WAS DETECTABLE WHEN I PLUG IT, WITH NO BATTERY IN "SP_Flash_Tool_v3.1332.0.187" , SCATTER - LOADING PUT/MOUNT THE FILE FROM ROM "JY-G3-20130523-102107" NAMED "MT6589_Android_scatter_emmc" AND HIT "FIRMWARE->UPGRADE" CONNECT THE PHONE TO PC WITH NO BATTERY AND PUSH NOT FOR LONG, POWER BUTTON AND VOLUME MINUS/DOWN. AFTER THAT THE PROCESS OF RESTORE THE SOFT IN THE PHONE IT SHOULD STARTING. THANKS TO ANYONE WHO POSTED THE SOFTWARE NEEDED. FOR A FEW DAYS HERE IS A DOWNLOAD LINK
don't forget to add (point) .html at the end
fastupload.rol.ro/8d37335019a3fa55a5decead42e8b667
there is a official rom on this page:
www.talkingmobi.com/rom-download-2/rom-download-2013-may-2014/
scroll through it there are many roms but it is there.
you can also find the flashing guide and tools to download you need to reply to the posts there to see the links i know it is a odd restriction and also no right clicking is allowed
used that to fix my bricked Jiayu G3T and it worked
good luck
I need a help
I bought inew v3 and this is the first time to buy chinese phone
There were some problems so i tried to upgrade the firmare through flash tools but it failed and now no response ; no recovery open and not recognized when connected with usb.....i think every thing formated
Is there any solution to back it to live again
I've had success with ODIN software. Do a search on the boards here for it.
StarFire_MK2 said:
I've had success with ODIN software. Do a search on the boards here for it.
Click to expand...
Click to collapse
No response .....the mobile is dead even not charging
Inew peoblem
ahmedsh22006 said:
No response .....the mobile is dead even not charging
Click to expand...
Click to collapse
same thin my cant be charged, no led lamp on, bt it is recognized withoud battery by computer and can be flasher. But i cant turn it on.
Help pls
puding22 said:
same thin my cant be charged, no led lamp on, bt it is recognized withoud battery by computer and can be flasher. But i cant turn it on.
Help pls
Click to expand...
Click to collapse
Same problem occurred to me today. Did you manage to fix it?
Hello,
I tried to flash Lollipop from another Z2's Nandroid backup. But Only thing I got now is blinking red LED when I connect phone to charger or PC (Flashmode and fastboot dead).
All the tricks with buttons I already tried. And after that I dissasembled my Z2 to try pull out battery - nothing.
After that I found out, there is a Testpoint and when I ground it I can connect to PC as SOMC Flash Device but I don't have any SETool stuff and something like that.
I tried to use S1tool from 28.2.2015 but it still doesn't support MSM8974-AB only MSM8974.
Thanks for any advices.
martan777 said:
Hello,
I tried to flash Lollipop from another Z2's Nandroid backup. But Only thing I got now is blinking red LED when I connect phone to charger or PC (Flashmode and fastboot dead).
All the tricks with buttons I already tried. And after that I dissasembled my Z2 to try pull out battery - nothing.
After that I found out, there is a Testpoint and when I ground it I can connect to PC as SOMC Flash Device but I don't have any SETool stuff and something like that.
I tried to use S1tool from 28.2.2015 but it still doesn't support MSM8974-AB only MSM8974.
Thanks for any advices.
Click to expand...
Click to collapse
pc companion repair?
press vol + and power then connect as flsahmode or flashboot with Flashtools?
Nothing, Fastboot and Flashmode are completely dead.
martan777 said:
Nothing, Fastboot and Flashmode are completely dead.
Click to expand...
Click to collapse
Have you tried this
http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4
myrums said:
Have you tried this
http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4
Click to expand...
Click to collapse
Yes, phone doesn't react. Tried all buttons tricks even with rubber band on it for all night. Only flashing mode I can achieve is trough testpoint.
z2
hey there m8 : ) ihave the same issue also and believe its not working , but i think i could do some atleast if u help , any idea where is the xperia z2 test point is ? i've seen lots of threads and believe me ALOT and found nothing about the test point from my phone here is the pic btw check it out :
and my last Question is there any model of JTAG boxes that could Fix sony xperia z2 (D6502 ) atm or we should just wait more .
ah come on cant link pic :/ shame is there any pic from z2 test point guys ?
lllldante said:
hey there m8 : ) ihave the same issue also and believe its not working , but i think i could do some atleast if u help , any idea where is the xperia z2 test point is ? i've seen lots of threads and believe me ALOT and found nothing about the test point from my phone here is the pic btw check it out :
and my last Question is there any model of JTAG boxes that could Fix sony xperia z2 (D6502 ) atm or we should just wait more .
ah come on cant link pic :/ shame is there any pic from z2 test point guys ?
Click to expand...
Click to collapse
No idea about the jtag thing but I think this is the test point for the Z2, I connected it to PC and all other points give no change, but this one turns the led off when grounded by touching the metal shields with a paper clip.
If I'm wrong then OP please correct me.
Also am patiently waiting for an update to S1 Tools for our d6503/2, there's plenty of hard bricks qwith unfortunately no solution unlike other Z flagships.
hard brick z2
yep i tested it also and the only change that i could get is just that point that u mentioned , was in city searching for some one to fix my phone he said hes gonna charge me 50 dollar to fix my phone without even opening my phone with heat ( already opened it : / ) , when i asked him whats this about and how could u fix it he said it s a new way that came for z2 and i could get ure boot back up again , hopefully i will go there in 2 or 3 days to see if his right , will let u know if i fixed the phone and hopefully i could ask him about the way that his doing it : )
This is testpoint that works for me.
z2
ah ok
martan777 said:
Hello,
I tried to flash Lollipop from another Z2's Nandroid backup. But Only thing I got now is blinking red LED when I connect phone to charger or PC (Flashmode and fastboot dead).
All the tricks with buttons I already tried. And after that I dissasembled my Z2 to try pull out battery - nothing.
After that I found out, there is a Testpoint and when I ground it I can connect to PC as SOMC Flash Device but I don't have any SETool stuff and something like that.
I tried to use S1tool from 28.2.2015 but it still doesn't support MSM8974-AB only MSM8974.
Thanks for any advices.
Click to expand...
Click to collapse
I had same problem. did you find the solution?
0906 said:
I had same problem. did you find the solution?
Click to expand...
Click to collapse
No, even two services couldn't fix it. Waiting now for new S1tool
Refresh
.
Don't know about Sony repair service, just tried some unofficial services and nothing. All I got is only flashing with testpoint but for this you need some flashing box like Octopus box or SETool. Also exists alternative - S1tool which is free but now works only with Z1 and older models.
refresh
how could restoring another nandroid or carbon rom cause a hard brick?
I don't know. It was 5.0 backup from another Z2 (same model) and i had 4.4.
martan777 said:
This is testpoint that works for me.
Click to expand...
Click to collapse
hello sir .now your mobile alive or not? please tell
me ,i m also in waiting for solution.
the backup you installed had ta partition? flashing another phone's ta partition will brick your device
Hello Everyone,
I Rooted My Galaxy S2 (Indian 'G' Version), Then Installed A recovery Via ROM manager app. I forgot to unlock Bootloader, Then I downloaded CM11 Nighlty ROM zip....... Inside the zip there was Boot.img (which i thought that it is Cwm recovery) and flashed it with an app and it failed to flash.... And I rebooted my phone and BOOM!! My phone's dead.... Bricked (i think so)..... No Display, No download Mode, Nothing! I tried to bring it to download Mode by USB JIG..... But still no Luck! Please Help me friends! (Pardon me if I posted in wrong place! This is my first time in XDA)
Hello ... calm .. everything has solution .. we are going to see what can be ... tell me ... the phone when you plug to the charger ... has take the load? it has appear something on screen?
leocadenas said:
Hello ... calm .. everything has solution .. we are going to see what can be ... tell me ... the phone when you plug to the charger ... has take the load? it has appear something on screen?
Click to expand...
Click to collapse
No Sir, When I keep that for chargingbnothing Happens! No display! The phone won't turn on with battery but gets heated near camera area. Also I used 'Rashr' app to flash boot.img from nightly zip. Tried USB jig but still invain.
Amogh Thambi said:
No Sir, When I keep that for chargingbnothing Happens! No display! The phone won't turn on with battery but gets heated near camera area. Also I used 'Rashr' app to flash boot.img from nightly zip. Tried USB jig but still invain.
Click to expand...
Click to collapse
if you can't get into download mode in any way, your phone is bricked. There is nothing you can do now.
gsstudios said:
if you can't get into download mode in any way, your phone is bricked. There is nothing you can do now.
Click to expand...
Click to collapse
Okay. Thanks a lot! I guess I have to change it's motherboard!
Amogh Thambi said:
Okay. Thanks a lot! I guess I have to change it's motherboard!
Click to expand...
Click to collapse
yep, that's one way to solve it.
I think the same.. but ....... to obtain a new motherboard.. at least .. in my country .. mmmmm it is impossible!!! only used.... and not ten points.... Where are you Amogh Thambi ?
leocadenas said:
I think the same.. but ....... to obtain a new motherboard.. at least .. in my country .. mmmmm it is impossible!!! only used.... and not ten points.... Where are you Amogh Thambi ?
Click to expand...
Click to collapse
Here in India, A local shop owner told me that he could replace the motherboard for 3000RS (50$ approx) or Revive my hardbricked phone by repairing it for 1500RS (25$ Approx). It will be double cost if I go to official Samsung Care.
Amogh Thambi said:
Here in India, A local shop owner told me that he could replace the motherboard for 3000RS (50$ approx) or Revive my hardbricked phone by repairing it for 1500RS (25$ Approx). It will be double cost if I go to official Samsung Care.
Click to expand...
Click to collapse
Did you try changing your battery? Try to find a similar Samsung Battery and boot into download mode then. The boot.img is the kernel, and if it didn't flash, the ROM/Stock ROM should still boot up, or at the maximum should give you a bootloop. I still feel it is some battery fallacy, since the processes which you followed don't have any such errors.
Regards.
warrior1208 said:
Did you try changing your battery? Try to find a similar Samsung Battery and boot into download mode then. The boot.img is the kernel, and if it didn't flash, the ROM/Stock ROM should still boot up, or at the maximum should give you a bootloop. I still feel it is some battery fallacy, since the processes which you followed don't have any such errors.
Regards.
Click to expand...
Click to collapse
When i flashed boot.img the battery was almost full.... After it failed to flash... I rebooted to see if everything was okay... But Boom! After i pressed reboot to recovery the phone turned off and died..... Also in the repair shop, we tried booting up with electric source but still no luck! First Weird and Bad experience with samsung
Amogh Thambi said:
Hello Everyone,
I Rooted My Galaxy S2 (Indian 'G' Version), Then Installed A recovery Via ROM manager app. I forgot to unlock Bootloader, Then I downloaded CM11 Nighlty ROM zip....... Inside the zip there was Boot.img (which i thought that it is Cwm recovery) and flashed it with an app and it failed to flash.... And I rebooted my phone and BOOM!! My phone's dead.... Bricked (i think so)..... No Display, No download Mode, Nothing! I tried to bring it to download Mode by USB JIG..... But still no Luck! Please Help me friends! (Pardon me if I posted in wrong place! This is my first time in XDA)
Click to expand...
Click to collapse
Hi, when you connect you i9100 to computer do get any response, like any beeping sound in pc or failed to find drivers error when connected to pc ?
jaysan2 said:
Hi, when you connect you i9100 to computer do get any response, like any beeping sound in pc or failed to find drivers error when connected to pc ?
Click to expand...
Click to collapse
Mine is I9100G ........ And when i connect to PC with battery nothing happens! But when i connect to PC with battery removed it shows "Failed to recognise device" and then it disappears!
Amogh Thambi said:
Mine is I9100G ........ And when i connect to PC with battery nothing happens! But when i connect to PC with battery removed it shows "Failed to recognise device" and then it disappears!
Click to expand...
Click to collapse
hi, as i have seen your posts you have written that you do have tried jig, and no results. try to take out battery and connect the jig and put the battery, i believe this the last chance you might have through jig. Or just jtag it for 25$ it is not that expensive, let me know what happens with jig.
Hello guys!
I'm kinda freakin' out here.
Here's the story:
I bought this amazing Redmi 3 Pro from China, and after waiting for 33 days, it arrived. I knew that it's important change the ROM that came with the device, so... I changed it. I'm from Brazil, so I needed a ROM with Portuguese-BR language and at least, stable. When I was going to change the ROM, my device just turn off and never turned on again.
OBS: The drivers are installed. It recognizes as "Qualcomm HS-USB QDLoader 9008", so I think that it's on EDL Mode.
OBS2: I tested flash on: Win7(x64) and Win10(x64). Neither worked.
OBS3: Every time, I get the error "Reached End of File.(0x80070026: Receiving Hello Packet.)
OBS4: I downloaded several ROMs, several versions of MiFlash (including the Beta version) and nothing passed from the error above.
OBS5: The device doesn't turn on, doesn't light on the LED, doesn't vibrate etc.
I believe that the problem resides on the missing two files: MPRG8936.mbn and 8936_msimage.mbn.. If anyone have those files, please, share here.
Thank's for those who can help! ^^
Brow1998 said:
Hello guys!
I'm kinda freakin' out here.
Here's the story:
I bought this amazing Redmi 3 Pro from China, and after waiting for 33 days, it arrived. I knew that it's important change the ROM that came with the device, so... I changed it. I'm from Brazil, so I needed a ROM with Portuguese-BR language and at least, stable. When I was going to change the ROM, my device just turn off and never turned on again.
OBS: The drivers are installed. It recognizes as "Qualcomm HS-USB QDLoader 9008", so I think that it's on EDL Mode.
OBS2: I tested flash on: Win7(x64) and Win10(x64). Neither worked.
OBS3: Every time, I get the error "Reached End of File.(0x80070026: Receiving Hello Packet.)
OBS4: I downloaded several ROMs, several versions of MiFlash (including the Beta version) and nothing passed from the error above.
OBS5: The device doesn't turn on, doesn't light on the LED, doesn't vibrate etc.
I believe that the problem resides on the missing two files: MPRG8936.mbn and 8936_msimage.mbn.. If anyone have those files, please, share here.
Thank's for those who can help! ^^
Click to expand...
Click to collapse
don't panic.. just try this method.. your phone will be back!!
http://en.miui.com/forum.php?mod=viewthread&tid=283484&page=9#pid5645253
Didn't worked
saikatmitra71 said:
don't panic.. just try this method.. your phone will be back!!
Click to expand...
Click to collapse
Heey, didn't worked. .-.
it will be solved with the method which explained on this thread
en.miui.com/thread-283484-5-1.html
Hey @Brow1998
Try this : HERE
Section How to Unbrick the Redmi3
Scenario B (Hardbrick)
adblocker said:
Hey @Brow1998
Try this : forum.xda-developers.com/redmi-3/development/redmi-3-pro-spacex-rom-t3406919
Section How to Unbrick the Redmi3
Scenario B (Hardbrick)
Click to expand...
Click to collapse
Well.. I believe that my phone's battery is dead.. How can I charge it externally? Cuz the charger isn't charging properly. Tried several chargers, but the light of low battery doesn't turn on in a couple days.
Brow1998 said:
Well.. I believe that my phone's battery is dead.. How can I charge it externally? Cuz the charger isn't charging properly. Tried several chargers, but the light of low battery doesn't turn on in a couple days.
Click to expand...
Click to collapse
You need to plug the battery to other redmi 3 and charge it
or charge it directly with 1A 3.9V (risk of damage)
adblocker said:
You need to plug the battery to other redmi 3 and charge it
or charge it directly with 1A 3.9V (risk of damage)
Click to expand...
Click to collapse
Well.. I live in Brazil, and I don't know anyone who have this device, so that's not an option. Any other sugestions to charge it?
Brow1998 said:
Well.. I live in Brazil, and I don't know anyone who have this device, so that's not an option. Any other sugestions to charge it?
Click to expand...
Click to collapse
you do not need to charge the phone before flashing. i had the same problem. connect your phone to computer and after some minutes (may be up to 20 minutes) in device manager you will the phone as..... qdloader.... 9008 and every thing is ready to flash according the instructions.
rekh said:
you do not need to charge the phone before flashing. i had the same problem. connect your phone to computer and after some minutes (may be up to 20 minutes) in device manager you will the phone as..... qdloader.... 9008 and every thing is ready to flash according the instructions.
Click to expand...
Click to collapse
The computer recognizes the device exactly like this "Qualcomm HS-USB QDLoader 9008 (COM20)"
When i'm going to flash, an error appears, "Reached End of File.(0x80070026: Receiving Hello Packet.)".
Using the MiFlash Beta, the error says "Coudn't communicate with port COM20"
I wanna play pokémon go :c
Brow1998 said:
The computer recognizes the device exactly like this "Qualcomm HS-USB QDLoader 9008 (COM20)"
When i'm going to flash, an error appears, "Reached End of File.(0x80070026: Receiving Hello Packet.)".
Using the MiFlash Beta, the error says "Coudn't communicate with port COM20"
I wanna play pokémon go :c
Click to expand...
Click to collapse
why dont you do what I said ! ?
try it
someone like you did it and he saved his phone!
adblocker said:
why dont you do what I said ! ?
try it
someone like you did it and he saved his phone!
Click to expand...
Click to collapse
If you're talking about the solution through the guide for Redmi 3, I just did it and nothing worked. On MiFlash 2015.10.28.0 appeared the error "0x800700aa" Something like "Current Resource current being used" and when I click on refresh and try it again, the same old error appears: "0x80070026: Receiving Hello Packet"
On MiFlash Beta, the error "Can not read from port COM4" still appears.
Just updating.
Using this method, it worked: http://en.miui.com/forum.php?mod=viewthread&tid=283484&page=5#pid5510469
I was making some mistakes, but doing it properly totaly works!
Thank you all!
Brow1998 said:
Heey, didn't worked. .-.
Click to expand...
Click to collapse
same with my problem yesterday , my redmi3 deadbrick, but i can repair it, sorry for my english , follow that tutorial link