I need a help
I bought inew v3 and this is the first time to buy chinese phone
There were some problems so i tried to upgrade the firmare through flash tools but it failed and now no response ; no recovery open and not recognized when connected with usb.....i think every thing formated
Is there any solution to back it to live again
I've had success with ODIN software. Do a search on the boards here for it.
StarFire_MK2 said:
I've had success with ODIN software. Do a search on the boards here for it.
Click to expand...
Click to collapse
No response .....the mobile is dead even not charging
Inew peoblem
ahmedsh22006 said:
No response .....the mobile is dead even not charging
Click to expand...
Click to collapse
same thin my cant be charged, no led lamp on, bt it is recognized withoud battery by computer and can be flasher. But i cant turn it on.
Help pls
puding22 said:
same thin my cant be charged, no led lamp on, bt it is recognized withoud battery by computer and can be flasher. But i cant turn it on.
Help pls
Click to expand...
Click to collapse
Same problem occurred to me today. Did you manage to fix it?
Related
Hi guys,
I flashed WM 6.5 to ma Atom. But right now, it's not working, even bootloader mode. I tried many times CAMERA+ RESET (stylus) then inserted batt. But still nothing happens. Do you guys know what shall i do? I think ma device not dead, because - when i connect to charger plug, the LED light is blinking as i insert batt.
Thanks, waiting your advices.
Eku
im also having the same trouble too...i was flashing my atom using SD card flashing method but then halfway through it it went blank screen...so i took off the battery...now it cant even be switched on...is there anyway to save it now??please please...any assistance is much appreciated...thanks!!!
+1 with the same problem... i searched the forum n found this guide
http://wiki.xda-developers.com/index.php?pagename=DeadBoot
but i couldnt rly figure it out...
adnan_efe said:
+1 with the same problem... i searched the forum n found this guide
http://wiki.xda-developers.com/index.php?pagename=DeadBoot
but i couldnt rly figure it out...
Click to expand...
Click to collapse
you must have basic electronics skills to build the cable from the article and connect to your phone via self made cable with pc and then using the files and drivers attached you can restore your boot loader..if you aren't sure that you can do it by yourself I suggest to send your phone to phone repair shop, where probably they can do this.
I was trying to root my phone. After a lot of trying to flash, my phone shut down and I can't turn it on again. When I try charging, Red light keeps blinking also when I connect it to PC. I charged for almost 4 hours now and still red light blinking but doesn't turn on. Please help, my phone is 2 weeks old.
It's probably bricked.
Try Sony update service for re installing the system
Sent from my MT15i using xda app-developers app
jptman said:
It's probably bricked.
Try Sony update service for re installing the system
Sent from my MT15i using xda app-developers app
Click to expand...
Click to collapse
Can i update it without turning the phone on?
Ckai14 said:
Can i update it without turning the phone on?
Click to expand...
Click to collapse
Yes, that last post is a bit misleading.
Download flashtool from the sticky threads in the dev section and download a stock .ftf file from there as well.
Enter flashmode on phone and flash the stock .ftf file.
There is a possibility the phone is bricked but there are lots of other options to try first.
EDIT, also, try this. Take the battery out and leave for 1-2 minutes, replace battery and try to charge again
Sony update service doesn't require that your phone needs to be turned on.
I finally fixed my phone. I updated it using Sony Update Center, after a few hours. It turned on. Thanks guys!
Ckai14 said:
I finally fixed my phone. I updated it using Sony Update Center, after a few hours. It turned on. Thanks guys!
Click to expand...
Click to collapse
Can you please help me
anooparavindan said:
Can you please help me
Click to expand...
Click to collapse
Try flashing stock fw using flashtool !
And see whether it worked!
Sent from my MT11i using xda premium
Ghostfreak NB said:
Try flashing stock fw using flashtool !
And see whether it worked!
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
I even cannot switch on my phone..chk my detail qstn in Q&A forum.please help
anooparavindan said:
I even cannot switch on my phone..chk my detail qstn in Q&A forum.please help
Click to expand...
Click to collapse
It doesn't require your phone to be working!
Well,what's the purpose of flashtool if it requires your phone to be working!
Just read a thread on how to flash by Lone wanderer or Madfysh
Sent from my MT11i using xda premium
Download flashtool and download this ftf file https://docs.google.com/file/d/0ByNPPw6PDxkkdzgyakVCSURMTUU/edit?pli=1
Install flashtool and copy that downloaded ftf file to C:/Flashtool/firmwares
Open flashtool click on lighthining icon and choose flashmode and click ok
Now you will see sth like just click ok !
Now remove and reinsert your battery ! But don't turn on ! Just hold back key and connect to computer and flashtool will recover your neo l to healthy again
Can you please help me
Click to expand...
Click to collapse
Use sony update service its the best way to restore your phone. i will automatically guide you through the steps.:good:
Ckai14 said:
I was trying to root my phone. After a lot of trying to flash, my phone shut down and I can't turn it on again. When I try charging, Red light keeps blinking also when I connect it to PC. I charged for almost 4 hours now and still red light blinking but doesn't turn on. Please help, my phone is 2 weeks old.
Click to expand...
Click to collapse
its very simple..just install flashtool. and download stock ftf for your phone. copy it into firmware folder of flashtool. and flash it. no need to start phone. means u can flash it even its not working.
---refer this link to download stock firmwares----
http://forum.xda-developers.com/showthread.php?t=1952333
Hi all,
Sorry to bring back an old post but I'm having the same issue as the first post. I was able to put my phone on flash mode with the stocked ftf provided here. Once complete, I unplug my phone from the computer and tried to turn it on, it vibrates but nothing shows up. I tried flashing it numerous times with the same results.
The only difference now than before I first flashed it is that now when I click on the power button, it doesn't flash red.
Please advise.
Thanks in advance.
Facing a similar problem
Hey guys , I am facing a similar problem ....My phone suddenly stopped working one day....It does not charge even the led does not glow(as it showed up red colour on charging) ....even it does not get detected on my PC.
I have tried everything it still does not turn on... I tried removing battery and sim card a number of times , I tried using pc companion and sony update service but it still does not turn on ( it does not get detected on any of them) but a green light shows up on my device when it gets connected to update service..but no effect on the pc. Please help me....!!
try flashtool...scroll up and read Saingpor's post..
Im having the same problem. The thing is my computer cant recognize my phone. I have tried using flashtool and Sony Pcc. Still it cant detect my MT25i. Please help me. Thanks.
hii my TCL s950(idol x) doesn't boot anymore ( nothing works no recovery no LED light nothing and i can't connect to the PC pls help me (
luscharsch said:
hii my TCL s950(idol x) doesn't boot anymore ( nothing works no recovery no LED light nothing and i can't connect to the PC pls help me (
Click to expand...
Click to collapse
Mine too! I've changed the built-in battery with other brand-new one (ordered it from china) and that didn't helped me. It's completely dead. Many people have this problem, I think it's faulty device. Don't recommend it.
deepgeorge said:
Mine too! I've changed the built-in battery with other brand-new one (ordered it from china) and that didn't helped me. It's completely dead. Many people have this problem, I think it's faulty device. Don't recommend it.
Click to expand...
Click to collapse
i know how to repair it you need the SP_FLASH_TOOL and the stock rom.
the rom must fit in the tool then power off the device then plug in your device, start the programm till its done, unplug the device and it will boot
Please help.My micromax A116 not charging while swichted on.If i Swiched off than connect charger it charges perfactly .All usb function ie otg drive otg mouse working perfactly.Even I flashed it with stock rom,calibrate battery flash other rom .But still it is not charging while it is on .So every tome it discharged I have to switc it off than charge in same switch off mode.Even i give it to the mobile service center they told there is no fault in board neither in battery.
Same problem
vicky4india said:
Please help.My micromax A116 not charging while swichted on.If i Swiched off than connect charger it charges perfactly .All usb function ie otg drive otg mouse working perfactly.Even I flashed it with stock rom,calibrate battery flash other rom .But still it is not charging while it is on .So every tome it discharged I have to switc it off than charge in same switch off mode.Even i give it to the mobile service center they told there is no fault in board neither in battery.
Click to expand...
Click to collapse
Have you fix your phone. Please share if did. I also have the same problem with my phone. I think it is happen when i calibrating my battery.
Guilaz said:
Have you fix your phone. Please share if did. I also have the same problem with my phone. I think it is happen when i calibrating my battery.
Click to expand...
Click to collapse
no i am also waiting for help.second i wish to mention its happen when i flash doge rom and suggested karnel.:crying:
A software problem
vicky4india said:
no i am also waiting for help.second i wish to mention its happen when i flash doge rom and suggested karnel.:crying:
Click to expand...
Click to collapse
If the phone charges while switched off there is no hardware problem whatsoever. It's a bug. You should post about this bug in Doge ROM thread. If you want to get rid of the bug flash stock (via sp flash tool) and then other custom rom. If you want to use a custom kernel with a custom rom keep in mind to check that the base rom used is A116 stock.
I have also read that removing the battery for an hour or two and than putting it back in solved the problem.
The other problem can be the charger. Are you using the USB cable that came with your smartphone? Even if you are charging with the original cable do get a hold on another(from your friend owning a116) and check if the problem still persists.
Thanks anyway
Jayvijay Gohil said:
If the phone charges while switched off there is no hardware problem whatsoever. It's a bug. You should post about this bug in Doge ROM thread. If you want to get rid of the bug flash stock (via sp flash tool) and then other custom rom. If you want to use a custom kernel with a custom rom keep in mind to check that the base rom used is A116 stock.
I have also read that removing the battery for an hour or two and than putting it back in solved the problem.
The other problem can be the charger. Are you using the USB cable that came with your smartphone? Even if you are charging with the original cable do get a hold on another(from your friend owning a116) and check if the problem still persists.
Click to expand...
Click to collapse
I relly appreciate your comment sir. But ive allready tried to flash stock via sp tool but the problem is no driver found in my device. Were the same thought it is not about hardware problem therefore i wont to go to service center for this. Id like to solve this issue with my own searching and also asking here :laugh::laugh:
I think the problem is the built in driver of my phone is corrupted. When it connect to pc. It always say unknown device.
Guilaz said:
I relly appreciate your comment sir. But ive allready tried to flash stock via sp tool but the problem is no driver found in my device. Were the same thought it is not about hardware problem therefore i wont to go to service center for this. Id like to solve this issue with my own searching and also asking here :laugh::laugh:
I think the problem is the built in driver of my phone is corrupted. When it connect to pc. It always say unknown device.
Click to expand...
Click to collapse
i tried all stock rom of different version ,custom rom,flashing stock by formatting and flashing method by sp tool,changing karnel all possible,but finally no result still i can flash .and charge in off mode.but in on mode only otg function working no pc connection no charging.
its true that driver problem but how i can get that particular driver.and why flashing not resolving the problem any help please .thanks
vicky4india said:
its true that driver problem but how i can get that particular driver.and why flashing not resolving the problem any help please .thanks
Click to expand...
Click to collapse
Vicky i successfuly flash stock via spflashtool but i still having a problem about charging . Now weve noticed that sp flash tool is not sulotion
Ya so flash tool is not the solution. It should be meta mode flashing. But as on some forum described meta mode flashing via connecting the phone by holding volume up .I tried but found it is not meta mode flashing .so only a factory mode flashing can help.second I checked in boot loader test it showing charger connected but the power its getting from the charger shows 49 ma.that's the reason of slow charging while switched off.but when switched on I tried diagnostic tools no charger and USB connection detected soclear some bug in a script which not let USB connection and charging .
Still cross finger waiting for expert solution.
vicky4india said:
Ya so flash tool is not the solution. It should be meta mode flashing. But as on some forum described meta mode flashing via connecting the phone by holding volume up .I tried but found it is not meta mode flashing .so only a factory mode flashing can help.second I checked in boot loader test it showing charger connected but the power its getting from the charger shows 49 ma.that's the reason of slow charging while switched off.but when switched on I tried diagnostic tools no charger and USB connection detected soclear some bug in a script which not let USB connection and charging .
Still cross finger waiting for expert solution.
Click to expand...
Click to collapse
i google your problem and found a very strange solution( strange because it is illogical but don't know how it is working for some people you may try it )
http://forums.androidcentral.com/go...-charges-when-phone-off-dosent-when-help.html
Thanks I already googled and found that option. But that one is not working.
Sent from my Micromax A116 using xda app-developers app
I tried each and every option even updated latest kash kernel. Stock kernel. Doge rom stock rom. I also seen two new thread same problem but not solving please someone help
Stock rom with 4.2 orginal...
If the problem continues. Flash with sp tool and get to mmx care....
Sent from my Micromax A116 using XDA Free mobile app
I had the same problem
i had the same problem ,
just change your cable and make sure the front part of the cable i mean the one you insert in your phone looks like original micromax cable
this helped me and now man phone is charging fine
hope it works for you
Same problem here nothing seems to work
I have the same problem here with my Micromax A117 Canvas Magnus the mobile charges well when switched off but when its on it refuses to do so. It sends current in reverse lighting up the LED on the charger.
Every thing in the phone is stock.
I'm using the provided adapter and cable.
Guess its a problem with Micromax
Not charging phone while switched on
I am also facing the same problem, Not charging phone while switched on, please help!
Same problem
hi there
i am having a auxus nuclea n2 phone. this is also a mediatek phone. Same problem. while switched on. No charging. No usb. When switched off. Slow but perfect charging. I consulted auth. service centre and flashed default stock ROM provided by them via SP flash. But no result. Antivirus results also clean. Waiting to solve this BUG.!!
just flash the stock ROM then give to service center
they will solve the problem :laugh::laugh:
Micromax A116 switched off during factory reset due to low battery
Hi,
My micromax a116i swiched off during factory reset(manually) and it is death now, charging indicator showing nothing, even I have try to power on button, but still it is not working.
Please help.
Regards
Pravin
Resolved
Mobile uncle tool engineering mode solved my issue
Thanks to below post. (Solution at end)
S2 not charging when phone is switched on | Android Forums -androidforums.com/threads/s2-not-charging-when-phone-is-switched-on.561877
Hello Everyone,
I Rooted My Galaxy S2 (Indian 'G' Version), Then Installed A recovery Via ROM manager app. I forgot to unlock Bootloader, Then I downloaded CM11 Nighlty ROM zip....... Inside the zip there was Boot.img (which i thought that it is Cwm recovery) and flashed it with an app and it failed to flash.... And I rebooted my phone and BOOM!! My phone's dead.... Bricked (i think so)..... No Display, No download Mode, Nothing! I tried to bring it to download Mode by USB JIG..... But still no Luck! Please Help me friends! (Pardon me if I posted in wrong place! This is my first time in XDA)
Hello ... calm .. everything has solution .. we are going to see what can be ... tell me ... the phone when you plug to the charger ... has take the load? it has appear something on screen?
leocadenas said:
Hello ... calm .. everything has solution .. we are going to see what can be ... tell me ... the phone when you plug to the charger ... has take the load? it has appear something on screen?
Click to expand...
Click to collapse
No Sir, When I keep that for chargingbnothing Happens! No display! The phone won't turn on with battery but gets heated near camera area. Also I used 'Rashr' app to flash boot.img from nightly zip. Tried USB jig but still invain.
Amogh Thambi said:
No Sir, When I keep that for chargingbnothing Happens! No display! The phone won't turn on with battery but gets heated near camera area. Also I used 'Rashr' app to flash boot.img from nightly zip. Tried USB jig but still invain.
Click to expand...
Click to collapse
if you can't get into download mode in any way, your phone is bricked. There is nothing you can do now.
gsstudios said:
if you can't get into download mode in any way, your phone is bricked. There is nothing you can do now.
Click to expand...
Click to collapse
Okay. Thanks a lot! I guess I have to change it's motherboard!
Amogh Thambi said:
Okay. Thanks a lot! I guess I have to change it's motherboard!
Click to expand...
Click to collapse
yep, that's one way to solve it.
I think the same.. but ....... to obtain a new motherboard.. at least .. in my country .. mmmmm it is impossible!!! only used.... and not ten points.... Where are you Amogh Thambi ?
leocadenas said:
I think the same.. but ....... to obtain a new motherboard.. at least .. in my country .. mmmmm it is impossible!!! only used.... and not ten points.... Where are you Amogh Thambi ?
Click to expand...
Click to collapse
Here in India, A local shop owner told me that he could replace the motherboard for 3000RS (50$ approx) or Revive my hardbricked phone by repairing it for 1500RS (25$ Approx). It will be double cost if I go to official Samsung Care.
Amogh Thambi said:
Here in India, A local shop owner told me that he could replace the motherboard for 3000RS (50$ approx) or Revive my hardbricked phone by repairing it for 1500RS (25$ Approx). It will be double cost if I go to official Samsung Care.
Click to expand...
Click to collapse
Did you try changing your battery? Try to find a similar Samsung Battery and boot into download mode then. The boot.img is the kernel, and if it didn't flash, the ROM/Stock ROM should still boot up, or at the maximum should give you a bootloop. I still feel it is some battery fallacy, since the processes which you followed don't have any such errors.
Regards.
warrior1208 said:
Did you try changing your battery? Try to find a similar Samsung Battery and boot into download mode then. The boot.img is the kernel, and if it didn't flash, the ROM/Stock ROM should still boot up, or at the maximum should give you a bootloop. I still feel it is some battery fallacy, since the processes which you followed don't have any such errors.
Regards.
Click to expand...
Click to collapse
When i flashed boot.img the battery was almost full.... After it failed to flash... I rebooted to see if everything was okay... But Boom! After i pressed reboot to recovery the phone turned off and died..... Also in the repair shop, we tried booting up with electric source but still no luck! First Weird and Bad experience with samsung
Amogh Thambi said:
Hello Everyone,
I Rooted My Galaxy S2 (Indian 'G' Version), Then Installed A recovery Via ROM manager app. I forgot to unlock Bootloader, Then I downloaded CM11 Nighlty ROM zip....... Inside the zip there was Boot.img (which i thought that it is Cwm recovery) and flashed it with an app and it failed to flash.... And I rebooted my phone and BOOM!! My phone's dead.... Bricked (i think so)..... No Display, No download Mode, Nothing! I tried to bring it to download Mode by USB JIG..... But still no Luck! Please Help me friends! (Pardon me if I posted in wrong place! This is my first time in XDA)
Click to expand...
Click to collapse
Hi, when you connect you i9100 to computer do get any response, like any beeping sound in pc or failed to find drivers error when connected to pc ?
jaysan2 said:
Hi, when you connect you i9100 to computer do get any response, like any beeping sound in pc or failed to find drivers error when connected to pc ?
Click to expand...
Click to collapse
Mine is I9100G ........ And when i connect to PC with battery nothing happens! But when i connect to PC with battery removed it shows "Failed to recognise device" and then it disappears!
Amogh Thambi said:
Mine is I9100G ........ And when i connect to PC with battery nothing happens! But when i connect to PC with battery removed it shows "Failed to recognise device" and then it disappears!
Click to expand...
Click to collapse
hi, as i have seen your posts you have written that you do have tried jig, and no results. try to take out battery and connect the jig and put the battery, i believe this the last chance you might have through jig. Or just jtag it for 25$ it is not that expensive, let me know what happens with jig.