Hi
A power failure on the laptop interrupted my kernel flash.
I can get back to Download Mode, but Odin cannot recognize the phone anymore.
I can see also that the USB driver installation fails due to an error sent from device.
Anyway to recover from this situation ?
Thank you
jko76 said:
Hi
A power failure on the laptop interrupted my kernel flash.
I can get back to Download Mode, but Odin cannot recognize the phone anymore.
I can see also that the USB driver installation fails due to an error sent from device.
Anyway to recover from this situation ?
Thank you
Click to expand...
Click to collapse
Maybe the kernel did flash a recovery, so can you get to it?
Re-installing kies, don't forget to close kies before using odin. (don't think it has something to do with this problem but you can always try)
Do an advanced search on the member @Hopper8 and search for his Odin troubleshooting thread. Follow all the instructions there...... and in the mean time, DO NOT go anywhere PIT files no matter what anybody else may tell you.....bad pit flash = chuck the phone away.....
This might be my S2 or it might be my W, but it's definitely CM...
jko76 said:
Hi
A power failure on the laptop interrupted my kernel flash.
I can get back to Download Mode, but Odin cannot recognize the phone anymore.
I can see also that the USB driver installation fails due to an error sent from device.
Anyway to recover from this situation ?
Thank you
Click to expand...
Click to collapse
That's not a s2 issue, but a USB PC issue. Repair your PC USB ports or try in a different PC. If same happen in all PCs then it is a s2 issue.
Christiaan91 said:
Maybe the kernel did flash a recovery, so can you get to it?
Re-installing kies, don't forget to close kies before using odin. (don't think it has something to do with this problem but you can always try)
Click to expand...
Click to collapse
I have not tried to get to recovery. I was thinking it does not help since I cannot install the USB drivers for the device ?
I have never installed/used kies.
Thanks
jaswinky said:
That's not a s2 issue, but a USB PC issue. Repair your PC USB ports or try in a different PC. If same happen in all PCs then it is a s2 issue.
Click to expand...
Click to collapse
The USB HW is ok. Same issue with five different Windows7 computers.
jko76 said:
The USB HW is ok. Same issue with five different Windows7 computers.
Click to expand...
Click to collapse
Try a different data cable. If it doesn't work, take it to technical service. Anyway, be sure, because you're issue would be the first similar issue in the world i have read.
Enviado desde mi GT-I9500 usando Tapatalk 2
The S2 forum is littered with "my phone won't connect to/isn't recognised by my PC". It's a fairly common problem. 9 times out of 10 it turns out to be a USB port problem. I've lost count of the number of these threads I've commented in, so I wrote a guide on how to easily/cheaply replace the port/board assembly.........
This might be my S2 or it might be my W, but it's definitely CM...
---------- Post added at 05:35 PM ---------- Previous post was at 05:29 PM ----------
http://forum.xda-developers.com/showthread.php?t=2335961
This might be my S2 or it might be my W, but it's definitely CM...
keithross39 said:
The S2 forum is littered with "my phone won't connect to/isn't recognised by my PC". It's a fairly common problem. 9 times out of 10 it turns out to be a USB port problem. I've lost count of the number of these threads I've commented in, so I wrote a guide on how to easily/cheaply replace the port/board assembly.........
This might be my S2 or it might be my W, but it's definitely CM...
---------- Post added at 05:35 PM ---------- Previous post was at 05:29 PM ----------
http://forum.xda-developers.com/showthread.php?t=2335961
This might be my S2 or it might be my W, but it's definitely CM...
Click to expand...
Click to collapse
Before asume it is a usb board damage, he should discard a cable damage by trying a different Samsung or not Samsung usb data cable...
Enviado desde mi GT-I9500 usando Tapatalk 2
Related
Has the new version of KIES STOPPED recognizing ROOTED/Flashed phones??? Why is there no answer from any DEVELOPER/SENIOR Forum Member about this since yesterday? This problem is being faced by many people. Please treat this as URGENT MATTER!
I am facing a new problem with the latest version of Kies (Kies_2.0.3.11082_152_2). It fails to connect with the phone and shows the error, "cannot start service on this device. Pls disconnect and reconnect the device". What does this mean? Have tried everything. From re-installing Kies to re-installing device drivers using the Connection Error Resolution thing in the Tools menu of Kies. It was connecting fine till yesterday.
My laptop has Windows 7 Home Premium which is fully updated. And my phone is CF Rooted KF3 with Stock Kernel. Does anyone know what's wrong?
Ok. Never mind. I fixed it. Don't know if it is a permanent fix though. This is how I did it........Tick the USB Debugging option first and then connect. It will install a few drivers. Then disconnect and Un-tick the USB Debugging option, then reconnect. It starts recognizing. I guess there is some issue with Laptops using Windows 7 x64
Have you tried with usb debugging off?
Edit: looks like you found my answer as I was typing
Sent from my GT-I9100 using xda premium
Judged by the number of recent posts i would say you are correct latest |Kies has connection/ cannot update this firmware problems .
As Samsung have taken steps to counter the reset of custom rom counter this may be a further tightening .
jje
Does anyone have a clue how to fix that issue then with Kies not being able to check for the latest firmware if you flashed your phone? I can see this becoming troublesome in the future.
Roll back Kies to an earlier version .
jje
It's broken for standard phones too...rooted phones have not been singled out for special (mis)treatment.
---------- Post added at 12:52 PM ---------- Previous post was at 12:37 PM ----------
Style Icon said:
Ok. Never mind. I fixed it. Don't know if it is a permanent fix though. This is how I did it........Tick the USB Debugging option first and then connect. It will install a few drivers. Then disconnect and Un-tick the USB Debugging option, then reconnect. It starts recognizing. I guess there is some issue with Laptops using Windows 7 x64
Click to expand...
Click to collapse
Where is this USB debugging option to be found?
I noticed that by rolling back to 1.0.2.11071_128 the problem is here too (now?).
jeremy_norbury said:
It's broken for standard phones too...rooted phones have not been singled out for special (mis)treatment.
---------- Post added at 12:52 PM ---------- Previous post was at 12:37 PM ----------
Where is this USB debugging option to be found?
I noticed that by rolling back to 1.0.2.11071_128 the problem is here too (now?).
Click to expand...
Click to collapse
Menu / settings / application / development
Sent from my GT-I9100 using xda premium
Hi,
I have got a new Galaxy SIII and I am unable to connect it to my PC.
I have windows vista service pack 2. I have installed the samsung mobile usb driver and also MTP driver from microsoft, but the issue remained the same
the error message says
"Please consult your device manufacturer for assistance getting this device installed
Samsung mobile MTP device failed"
Same happens for PTP too..
Please advice how to resolve this.
Please consult your device manufacturer for assistance getting this device installed
Samsung .com
Download Kies includes USB drivers .
jje
JJEgan said:
Please consult your device manufacturer for assistance getting this device installed
Samsung .com
Download Kies includes USB drivers .
jje
Click to expand...
Click to collapse
That was a helpful answer NOT!
Problem still persists
JJEgan said:
Please consult your device manufacturer for assistance getting this device installed
Samsung .com
Download Kies includes USB drivers .
jje
Click to expand...
Click to collapse
Tried installing kies.. The problem persists.. Please help with a solution
landgateblue said:
That was a helpful answer NOT!
Click to expand...
Click to collapse
Dumbo for someone that had not installed Kies that is the correct answer .
jje
---------- Post added at 06:56 PM ---------- Previous post was at 06:53 PM ----------
cool_tuton said:
Tried installing kies.. The problem persists.. Please help with a solution
Click to expand...
Click to collapse
Kies installed connect with Samsung USB cable to a mainboard port only .
Power off phone reboot PC connect phone and let windows find USB drivers .
Run Kies let Kies find the phone .
That fails a Google search may help as its a multi answer problem .
jje
JJEgan said:
Dumbo for someone that had not installed Kies that is the correct answer .
jje
---------- Post added at 06:56 PM ---------- Previous post was at 06:53 PM ----------
Kies installed connect with Samsung USB cable to a mainboard port only .
Power off phone reboot PC connect phone and let windows find USB drivers .
Run Kies let Kies find the phone .
That fails a Google search may help as its a multi answer problem .
jje
Click to expand...
Click to collapse
I have tried all that... Still it fails... I guess it may be an issue with my PC... Would try with another PC now..
I have the same problem and I have tried it on two different computers with the Galaxy S3. Both computers are running Windows 7 64 bit. My son also has the S3 with a Mac computer. after installing Kies he has no problems. I guess Samsung needs to work on the drivers for windows as I have seen that many people are having problems. Call Samsung and report the problem (I did). The more people that call the faster it will be resolved.
i had this problem. pc didnt recognize it. took it to my brothers pc and still didnt work. it got fixed when i factory reset the phone and boom it worked on my pc running windows 7 64bit. and it also worked on my brothers pc
Well I finally found a solution - my son brought his S3 over and it worked so I figured I needed to do a factory reset of the phone, after I did that it connected without any problems. Doing a factory reset was a real pain since it also wipes out the 16gb of internal memory, and naturally I had to reinstall all my apps but it worked and I can connect without any problems. (Windows 7 64 bit laptop and desktop).
how i want to fix this matter ? help me guys. " Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. " my screen S2 appear this. all time. i cant go anywhere. when i unplug usb cable it blank. cant on. after i plug in usb cable, it appear this. pc cant recognize this driver " OMAP4430 ". im death. please help me.
What have you done dude
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kind of help plss.
llrzall said:
kind of help plss.
Click to expand...
Click to collapse
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kunterk said:
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
llrzall said:
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
Click to expand...
Click to collapse
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Make sure you are flashing the right ROM for your device.........
kunterk said:
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
A similar kind of thing happened to my phone as well when I was upgrading to 4.0.4 from gingerbread via Kies. The installation got stuck when the phone was in the download mode and I had no other option than to disconnect. But yours got stuck while using Odin. I would suggest you to flash the firmware again. I hope your phone goes into download mode now. As for the drivers, uninstall everything related to samsung from your PC and then reinstall it. DO NOT UPGRADE SAMSUNG KIES IF IT ASKS YOU TO DO SO! AS I TOLD YOU A SIMILAR THING HAPPENED TO MY PHONE. MY PC COULD'NT RECOGNIZE IT AND I REINSTALLED EVEYTHING AND IT FINALLY SHOWED SOME SIGN. MAKE SURE YOUR ANTIVIRUS IS FULLY DEACTIVATED WHILE YOU EXECUTE THE FLASHING OPERATION!
leech4 said:
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
Click to expand...
Click to collapse
make senses. but genuine won't make any different, all micro usb cable are the same. i'm using my old Nokia micro usb cable now, and just works fine
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
first of all, while your phone is disconnected from USB cable, can you enter download mode?if no, then try to find someone that have JIG. else, as leech4 said, this might caused by your USB cable. OR might caused by your USB port of your PC. as i said earlier, try to repair your USB driver (not sammy USB driver, but your PC's usb driver). flash using ODIN, and kill kies services from task manager as kies will conflict with ODIN later. here i give you LSJ link(thanks to ApriliaM3) in case you don't have. extract the zip and use all the PDA, PHONE and CSC file. you can even use PIT to re-partition your system. (tested and proven to be working). good luck mate.:good:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
TheATHEiST said:
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
Click to expand...
Click to collapse
LOL. its ur phone? no rite. learn from mistake, make me perfect next time.
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Wow, I suspect this kind of brick or what so ever others called it. I've read some where, and they talking about JIG. If what they mean is the same like what I understood from my electronic knowledge, then you have to find someone that have JIG to do further troubleshooting directly from your board, not via usb. Well, I'm just saying. You might want to seek for other solution first since it's your device.
Cheers
Sent from my GT-I9100 using xda app-developers app
Plz help me...
My sgsIII gt-i9300t not recognize by pc... when i try to root via download mode... and odin not added...
I try... change another cable... change usb port... reinstall driver...
Plz help me to resolve this problem... thnx
naoziluo said:
Plz help me...
My sgsIII gt-i9300t not recognize by pc... when i try to root via download mode... and odin not added...
I try... change another cable... change usb port... reinstall driver...
Plz help me to resolve this problem... thnx
Click to expand...
Click to collapse
you did make sure that Samsung Kies is not running? (even in Task Manager!). Best way is to de-install Kies for good after having the drivers installed.
chrismast said:
you did make sure that Samsung Kies is not running? (even in Task Manager!). Best way is to de-install Kies for good after having the drivers installed.
Click to expand...
Click to collapse
B4... samsung kies isnt install... but it not recognize too...
Is my driver is to old... even it support to note II...?
naoziluo said:
B4... samsung kies isnt install... but it not recognize too...
Is my driver is to old... even it support to note II...?
Click to expand...
Click to collapse
If Odin recognizes the Note II with the same USB cable etc., there has to be something wrong with the SIII I guess?
Usually you just have to make sure that (1) Kies is not running, (2) you have the drivers installed and (3) you are in download mode as per the guides.
What operating system are you on? If Windows 8 you might want to have a look here
windows 8 x86
chrismast said:
If Odin recognizes the Note II with the same USB cable etc., there has to be something wrong with the SIII I guess?
Usually you just have to make sure that (1) Kies is not running, (2) you have the drivers installed and (3) you are in download mode as per the guides.
What operating system are you on? If Windows 8 you might want to have a look here
Click to expand...
Click to collapse
Yes thats right... i use win 8 x86... but b4... i can update for sgs ii, sgs advance, sgn 10.1, sgt 10.1, sg ace(cooper), sgt p1000... it work properly...
Now my i9300t... odin added only mtp mode... exclude debug and download mode...
naoziluo said:
Yes thats right... i use win 8 x86... but b4... i can update for sgs ii, sgs advance, sgn 10.1, sgt 10.1, sg ace(cooper), sgt p1000... it work properly...
Now my i9300t... odin added only mtp mode... exclude debug and download mode...
Click to expand...
Click to collapse
I assume you turned on USB debugging in the settings? (not sure if this could be the reason though).
chrismast said:
I assume you turned on USB debugging in the settings? (not sure if this could be the reason though).
Click to expand...
Click to collapse
Yes i checked usb debug... but it wont added... until i unchecked and connect again odin said added...
naoziluo said:
Yes i checked usb debug... but it wont added... until i unchecked and connect again odin said added...
Click to expand...
Click to collapse
hence now it is working if I understand you well?
chrismast said:
hence now it is working if I understand you well?
Click to expand...
Click to collapse
i still cant connect in odin mode... i don't know what problem...
my info: PC windows 8 x86, Samsung galaxy sIII gt9300t 4.1.2...
did you try changing the usb ports on the cpu?
Sent from my GALAXY S3 running Mac OS
sriram231092 said:
did you try changing the usb ports on the cpu?
Sent from my GALAXY S3 running Mac OS
Click to expand...
Click to collapse
Yes... 2 wired... but mtp connect... n downlod mode not connect...
Start at the beginning what phone have you .Settings About phone , # jje
naoziluo said:
Yes... 2 wired... but mtp connect... n downlod mode not connect...
Click to expand...
Click to collapse
when you connect phone via usb to pc, it should first install drivers. did that happen? if it doesn't, there's no chance odin can recognize phone.
sriram231092 said:
when you connect phone via usb to pc, it should first install drivers. did that happen? if it doesn't, there's no chance odin can recognize phone.
Click to expand...
Click to collapse
Odin added when device is in mtp... but download n usb debug mode not recognize...
JJEgan said:
Start at the beginning what phone have you .Settings About phone , # jje
Click to expand...
Click to collapse
Sgs3 i9300t, sgnote 10.1, sgnote 2, sgs2, sgs advance, ace, i9300... mine n my friends... pc recognize all except i9300t... pc win8 x86...
naoziluo said:
Sgs3 i9300t, sgnote 10.1, sgnote 2, sgs2, sgs advance, ace, i9300... mine n my friends... pc recognize all except i9300t... pc win8 x86...
Click to expand...
Click to collapse
JJEgan asked about your phone buddy! not about the names of phones you own!
a couple of days of searching and this is the closest i get to my issue but still no where near a resolution
OTA update of Resurrection ROM went bad, lost everything (it happened at 3% battery completely without my consent and knowledge) I just found my phone stuck on failed encryption message and crap... no backup!!!
I went ahead and deleted everything, cache, system, dalvik... Flashed RR once more to find phone's working and all but that's not acceptable because I just can't get Odin to connect no matter what computer I used and every possible usb port I can access...
Drivers are updated and working because any other mode than download will have the GT-I9300 detected.
so what gives? well, all my readings and forum scouring have lead me to believe that it's a bootloader issue as (if I'm not mistaken) download mode gets loaded from there.
So now, logical action is to try to flash an original bootloader from an original firmware (latest or not) to see if that fixes the problem.
Any ideas?
---------- Post added at 04:13 PM ---------- Previous post was at 04:06 PM ----------
Forgot to ask, would it be possible, obviously since I can't do that through Odin, to modify a recovery.zip (with META-INF folder and recovery.img) by removing the recovery image and replacing it with the sboot.bin from an original firmware ?
---------- Post added at 04:14 PM ---------- Previous post was at 04:13 PM ----------
I ask this because that's how i managed to flash TWRP recovery through CWM, not sure i'd take a chance and flash bootloader this way
I have S6 edge on Rogers network G925W8, and I was trying to root it using chainfire's g925f, midway process My Phone got disconnected from odin and IDK why, now screen stuck and saying "Error occured while updating. Use the Emergency recovery function on smart switch. But the thing is my smart switch app can't detect my phone anymore, it says Unsupported Device. I even try to use kies and kies 3 but they are looking for recovery code, I don't even know where to get that, kies and smart switch didn't give me any code, I even tried software update and initialization, and it's looking for a S/N but I don't know what's the serial number of my phone, I can only see IMEI on box and my receipt. Any help will be highly appreciated. Thanks.
Mannypac9 said:
I have S6 edge on Rogers network G925W8, and I was trying to root it using chainfire's g925f, midway process My Phone got disconnected from odin and IDK why, now screen stuck and saying "Error occured while updating. Use the Emergency recovery function on smart switch. But the thing is my smart switch app can't detect my phone anymore, it says Unsupported Device. I even try to use kies and kies 3 but they are looking for recovery code, I don't even know where to get that, kies and smart switch didn't give me any code, I even tried software update and initialization, and it's looking for a S/N but I don't know what's the serial number of my phone, I can only see IMEI on box and my receipt. Any help will be highly appreciated. Thanks.
Click to expand...
Click to collapse
download your firmware from www.sammobile.com and flash with odin
put the phone in download mode
https://www.youtube.com/watch?v=kKU7otLN8N4&feature=youtu.be&list=UURAxVOVt3sasdcxW343eg_A
but i can't find the firmware for my phone g925w8. odin and smartswitch can't even detect my phone.
Mannypac9 said:
but i can't find the firmware for my phone g925w8. odin and smartswitch can't even detect my phone.
Click to expand...
Click to collapse
http://downloadandroidfiles.org/fil.../Canada/RWC-G925W8VLU1AOCG-20150415155020.zip
here you go
im good to you lol
---------- Post added at 06:57 AM ---------- Previous post was at 06:56 AM ----------
Mannypac9 said:
but i can't find the firmware for my phone g925w8. odin and smartswitch can't even detect my phone.
Click to expand...
Click to collapse
are you putting your phone in download mode and have you got the drivers installed
Sorry I can't quote because I have less than 10 post. Yup, I have already Samsung drivers installed here on my PC, do I need a separate USB drivers for S6 edge? and yes eventhough my phone is kinda brick i can still put it on download mode, but my pc can't detect my phone, it says USB not recognized.
Mannypac9 said:
Sorry I can't quote because I have less than 10 post. Yup, I have already Samsung drivers installed here on my PC, do I need a separate USB drivers for S6 edge? and yes eventhough my phone is kinda brick i can still put it on download mode, but my pc can't detect my phone, it says USB not recognized.
Click to expand...
Click to collapse
try different usb/and cable
http://androiddrivers.net/samsung-android-drivers/galaxy-s6-s6-edge-windows-drivers/
---------- Post added at 07:34 AM ---------- Previous post was at 07:31 AM ----------
Mannypac9 said:
Sorry I can't quote because I have less than 10 post. Yup, I have already Samsung drivers installed here on my PC, do I need a separate USB drivers for S6 edge? and yes eventhough my phone is kinda brick i can still put it on download mode, but my pc can't detect my phone, it says USB not recognized.
Click to expand...
Click to collapse
use this odin http://highonandroid.com/download-odin-v3-10-6/
thanks so much for your help man.
thats the odin version im using right now.. and i tried 3 different usb cables, on different ports and still no luck. even tried it on other pc with all the drivers installed, they still cant detect my phone. :crying:
I even downloaded the latest USB driver which is 1.5.51 but its still not recognized.
Mannypac9 said:
thanks so much for your help man.
thats the odin version im using right now.. and i tried 3 different usb cables, on different ports and still no luck. even tried it on other pc with all the drivers installed, they still cant detect my phone. :crying:
I even downloaded the latest USB driver which is 1.5.51 but its still not recognized.
Click to expand...
Click to collapse
join my community and ask there https://plus.google.com/communities...con&utm_medium=chrome_app&utm_campaign=chrome
Dear @Mannypac9,
When you put your device to ODIN mode and connect it to your PC dose your PC plays USB plugged in sound or not? if yes can I ask you to post screenshot of your device manger with the S6 edge connected?
Regards
jaythenut said:
http://downloadandroidfiles.org/fil.../Canada/RWC-G925W8VLU1AOCG-20150415155020.zip
here you go
im good to you lol
Click to expand...
Click to collapse
Wait is that a working firmware? Should this work for telus?
Where did you get it? I'm just about to buy but first thing first I wanna make sure
I have
1- Stock firmware
2- root method
3- compatible recovery
3- compatible Custom Roms
I got stuck with the 25 active g870w for too long rooted with only stock Rom
Don't want to do same mistake.
Regard
Jon
jaythenut said:
join my community and ask there https://plus.google.com/communities...con&utm_medium=chrome_app&utm_campaign=chrome
Click to expand...
Click to collapse
bluff master said:
Dear @Mannypac9,
When you put your device to ODIN mode and connect it to your PC dose your PC plays USB plugged in sound or not? if yes can I ask you to post screenshot of your device manger with the S6 edge connected?
Regards
Click to expand...
Click to collapse
Problem solved. I just borrow another USB cord, it's just weird all those 3 that I used was directly from my samsung phone package before.. Thanks for the help guys.
I have the same issue. But in my case I hear the USB sound when I plug in and plug out the USB cable, but the Smart Switch does not recognize my device. :/
Dear @rafaelpinaf
1) is it still the same after restarting your PC and changing USB Ports?
2)kindly check in device manger if there is "unknown devices", Kindly post screen shot (with your device attached to the PC).
Regards
bluff master said:
Dear @rafaelpinaf
1) is it still the same after restarting your PC and changing USB Ports?
2)kindly check in device manger if there is "unknown devices", Kindly post screen shot (with your device attached to the PC).
Regards
Click to expand...
Click to collapse
1) Yes! I did everything!
2) The PC recognize the USB port with the cellphone. THe Smart Switch do not. Follow attached!
rafaelpinaf said:
1) Yes! I did everything!
2) The PC recognize the USB port with the cellphone. THe Smart Switch do not. Follow attached!
Click to expand...
Click to collapse
Did you try to completely uninstall kies & smart switch & usb drivers , after that install smart switch and plug in your device
Regards