Related
Hi everyone.
I'm not in panic, but i'm close to it.
After hardspl done, i flash to Shadow 2.0 and everything goes ok.
Then, it stuck at bootloader! Softreset, hardreset, nothing helps, and worst, i can't connect to pc with usb!! simply can't connect!!!
I've done everything i can. search a lot, read a lot, and nothings help!!
so, please help me!!
(sorry my bad english)
is your battery more fully charged? (or at least 50%)
yes, it's almost full (80-90%).
i tried to pull it out a lot of times, waiting 20s, 2 minutes, half an hour, and nothing..
I really don't know what to do
mc_falco said:
yes, it's almost full (80-90%).
i tried to pull it out a lot of times, waiting 20s, 2 minutes, half an hour, and nothing..
I really don't know what to do
Click to expand...
Click to collapse
Try connecting the usb and running aku 2.2 WM5. That worked for me before other times.
I Am Not Pretty Sure But It Might Help U Out!
mc_falco said:
yes, it's almost full (80-90%).
i tried to pull it out a lot of times, waiting 20s, 2 minutes, half an hour, and nothing..
I really don't know what to do
Click to expand...
Click to collapse
why not try to do old way of flashing and it might help coz'
it help me when i had bootloder stuck.
i try with Prophet_PV_Temp. rom
and it went everything good .
thanks
Take off battery and place it back, switch on. What happens?
Regards,
Carty..
First thing to try: search and read WIKI:
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
Perhaps the links to the AKU/NVID are dead, I didn't check, but you can use any official ROM to get your phone back.
You MUST disable the 'connect through usb' option in AS before it will work.
Please Help I Have Done Everything But Cannot Get My Prophet To Connect Via Usb.
I TRIED EVERYTHING. I have bootloader screen but when i connect through USB it just says that device not recognized and nothing would happen. I even took the battery out for 2 hours... put in another phone charged to maximum and still same problem. Please if anyone could help.. i love this phone cant let it die like that.
I have ni ideas other than that you are doing something wrong...
l3v5y said:
I have ni ideas other than that you are doing something wrong...
Click to expand...
Click to collapse
Well I used the upgrade guide and i have done upgrades before and everything went fine. Except today when i tried the new way and tried to load the New Shadow Rom. all was done ok but when the phone restarted it just stucks at the bootloader. and since then it wont connect through USB . the PDA wont get recognized at all.. any ideas?
Use the 'old' upgrade method, and recover using an official wm5 rom from the ftp server. you must disable connect through usb in active sync... see the wiki for more details (prophet recovery)
please go to the link in my
signature...
Should Help!
I've bricked my S200 after an error in uploading 4.0.0.6 and after going thru the wiki steps... it's working again
Hi
I've just updated my x10mini using SEUS and I had app2sd.
I don't know why, but it does not start. It keeps reestarting after reaching the SE Logo screen.
I can't turn it off to try something because my battery is not accecible. Can Anyone help?
NerdBigHead said:
Hi
I've just updated my x10mini using SEUS and I had app2sd.
I don't know why, but it does not start. It keeps reestarting after reaching the SE Logo screen.
I can't turn it off to try something because my battery is not accecible. Can Anyone help?
Click to expand...
Click to collapse
Try this Thread Bro.......
http://forum.xda-developers.com/showthread.php?t=981935
pratyush_gamer said:
Try this Thread Bro.......
http://forum.xda-developers.com/showthread.php?t=981935
Click to expand...
Click to collapse
Thanks for your answer. But do you know if I turn my phone off this way and then conect to SEUS to reflash it again it will bring it back to live?
Because I didn't do anything wrong when I was updating my phone, I believe it happened because I had app2sd and deleted some native apps.
Thanks
NerdBigHead said:
Thanks for your answer. But do you know if I turn my phone off this way and then conect to SEUS to reflash it again it will bring it back to live?
Because I didn't do anything wrong when I was updating my phone, I believe it happened because I had app2sd and deleted some native apps.
Thanks
Click to expand...
Click to collapse
Dude this things turn ur phone Off as well as when you use SEUS atleast u can reflash your ROM.....!!!!
Do sum steps as following to reflash Correctly-:
Don't plug the USB.....pls follow the STEPS!!!
1. Turn your phone off using this method.
2. Start SEUS on your PC.
3. Choose your phone model(x10 mini/pro),--> Next-->When it shows instructions press the back button and hold...while holding it,plug the USB to your dead phone and hold it till it shows stable green light and the process will be started.....
4. And OMG your ROM is now Reflashed....
Enjoy.....!!!!!
Thanks for your attention. My problem is now solved.
Unfortunately I didn't do as said in the first comment of the toppic, by pulling of the little rubber around the cammera, but as said in the other posts along the thread, by pressing menu button + on/off button + back button. It really worked.
Thanks fot sending me that thread anyway.
Have a nice day.
My phone is dead dead.... Failed flashing kdz, now it doesn't do anything... What do I do???? Non of those steps worked.
sikario.prk said:
My phone is dead dead.... Failed flashing kdz, now it doesn't do anything... What do I do???? Non of those steps worked.
Click to expand...
Click to collapse
Hmmm, does removing the battery, reinserting it and pressing Back + Volume Up + Power at least produce the yellow Emergency mode screen?
Flash lg 10b stock rom with the help of kdz in emergency mode...
Sent from my LG-P500 using XDA App
yeah it will help u out jst tke out ur battery for few sec thn switch ur phone in emergency mode n connect with kdz n flash any lg 10.b. 10d rom
sikario.prk said:
My phone is dead dead.... Failed flashing kdz, now it doesn't do anything... What do I do???? Non of those steps worked.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=883314 follow this guidee nads make sure u have taken necessary precaution while flashing from kdz everything is mentioned in downgrading the phone in the link here http://forum.xda-developers.com/showthread.php?t=1038338
Was a flashing fail error. I left the phone without battery all night, and still nothing. PC doesn't detect it, or nothing.
sikario.prk said:
Was a flashing fail error. I left the phone without battery all night, and still nothing. PC doesn't detect it, or nothing.
Click to expand...
Click to collapse
Care to answer my question?
doktornotor said:
Hmmm, does removing the battery, reinserting it and pressing Back + Volume Up + Power at least produce the yellow Emergency mode screen?
Click to expand...
Click to collapse
Did and nothing, even left phone without battery all night. No emergency mode, or anything
sikario.prk said:
Did and nothing, even left phone without battery all night. No emergency mode, or anything
Click to expand...
Click to collapse
Well. RMA it then, nothing we could do here.
doktornotor said:
Well. RMA it then, nothing we could do here.
Click to expand...
Click to collapse
I'm kinda noob here, whats RMA? And, can I take it to warranty?
sikario.prk said:
whats RMA? And, can I take it to warranty?
Click to expand...
Click to collapse
RMA and claim warranty is the same thing.
doktornotor said:
RMA and claim warranty is the same thing.
Click to expand...
Click to collapse
Oh, lol, thanks.
Talked with a support agent from LG, they gave me an Authorization number that a have to write on the shipping box with the phone... Lets see what happens
If you have the TMo optimus T, use the V10L kdz file. The flashing utility has a force mode that WILL work even if the computer does not detect the phone. You just have to make sure that nothing else is plugged into the USB port, and that your phone will power up.
I've bricked my phone 3 times now fiddling with removing stuff from the LIB directory from the stock rom (stupid me) and have always been able to recover it.
crashff said:
If you have the TMo optimus T, use the V10L kdz file. The flashing utility has a force mode that WILL work even if the computer does not detect the phone. You just have to make sure that nothing else is plugged into the USB port, and that your phone will power up.
I've bricked my phone 3 times now fiddling with removing stuff from the LIB directory from the stock rom (stupid me) and have always been able to recover it.
Click to expand...
Click to collapse
KDZ updater?
I think it was. I'll have to dig out the file from my android stuff when I get home.
V10L_00.KDZ file and the english KDZ_FW_UP program.
the mode used was CS EMERGENCY.
crashff said:
I think it was. I'll have to dig out the file from my android stuff when I get home.
V10L_00.KDZ file and the english KDZ_FW_UP program.
the mode used was CS EMERGENCY.
Click to expand...
Click to collapse
Ok, pop me a msg, my last option to revive it, is sending it to LG
Did a conversion to original 2.2.2 V10q with KDZ and when turning on the phone, it didn;t turn on (as expected). Not responding at all. Power, button combination or some @#@# like that - not working. So, sent it to LG Service through VDF Romania 4 days ago and now i have a new PCB with new IMEI and a fully working P500. So, that was my solution for meddling with updaters, ROM's, etc. and forgetting to disable LGE Modem in Device Manager (it was late at night)
ok i took it to service its under warranty.... but i cant find the receipt.so cant do nothing here .. am in mexico so people here are totally hard headed.. so i know its hard bricked.... how can i know if the mother board is fried.... it got hard bricked after installing simplicity over mind cr..i followed a new installation mode... but didnt know there wasa order to flash rom over old rom... so the phone wont go to download mode or recovery..but when i press power it turns on... only black screeen but you could see tits on cause if you look from an angle screen looks like grey. so power goes into screen but its stuck there... what are the yptoms that the mother board is fried.??? in my situacion will jtag work.??
i dont have phone here with me but i think if i connect to usb it turns on black screen only .. it used to recognise it but not any more after trying some 3 button fixed and one clicked unbricked i thinnk its called......
raptorddd said:
ok i took it to service its under warranty.... but i cant find the receipt.so cant do nothing here .. am in mexico so people here are totally hard headed.. so i know its hard bricked.... how can i know if the mother board is fried.... it got hard bricked after installing simplicity over mind cr..i followed a new installation mode... but didnt know there wasa order to flash rom over old rom... so the phone wont go to download mode or recovery..but when i press power it turns on... only black screeen but you could see tits on cause if you look from an angle screen looks like grey. so power goes into screen but its stuck there... what are the yptoms that the mother board is fried.??? in my situacion will jtag work.??
i dont have phone here with me but i think if i connect to usb it turns on black screen only .. it used to recognise it but not any more after trying some 3 button fixed and one clicked unbricked i thinnk its called......
Click to expand...
Click to collapse
First off all try man flashing a stock rom by odin try to get back here is link http://forum.xda-developers.com/showthread.php?t=1840645
And see as you said your download mode is not working so try these remove battery and before that as you put the battery at that time only simultanously press volume up and down and power buttons it will work and download mode will come
Sent from my Ace-i
Hitesh2626 said:
First off all try man flashing a stock rom by odin try to get back here is link http://forum.xda-developers.com/showthread.php?t=1840645
And see as you said your download mode is not working so try these remove battery and before that as you put the battery at that time only simultanously press volume up and down and power buttons it will work and download mode will come
Sent from my Ace-i
Click to expand...
Click to collapse
thanks i did that didnt work for me i tried several times.... i found a palce in west covina in la county area actually where my bother works so ill give that a shot.... and also found one deom san jose on ebay.....
i tried alll those tricks but none worked.. it made it worse qith the one click un bricked...
USB Jig
raptorddd said:
thanks i did that didnt work for me i tried several times.... i found a palce in west covina in la county area actually where my bother works so ill give that a shot.... and also found one deom san jose on ebay.....
i tried alll those tricks but none worked.. it made it worse qith the one click un bricked...
Click to expand...
Click to collapse
You can try usb jig, you can order it from ebay or buy it from a store. If nothing works then u can go to your bro!
Rahul4Ace said:
You can try usb jig, you can order it from ebay or buy it from a store. If nothing works then u can go to your bro!
Click to expand...
Click to collapse
thanks i made my own didnt work so to the shop it goes...
Hi guys i accidently bricked my lg g2 (d620r) trying to unlock my bootloader (i was in official 5.0.2 and i tryed aboot4.img for kitkat) and after a lot of days i finally found out how to unbrick it...
So first you have to make sure the phone's battery is at 0% (you can test this by connecting your phone to your pc with the battery in if it power up without pressing any button then its at 0% if its not then it will do absolutely nothing)
so your phone WILL power up but it will imediately power off again because the battery is at 0% so unplug it and wait till a 0% battery icon appear i the screen
when you see the icon press and hold the volume up button and plug the phone to your pc
now you are in download mode and you can flash a .kdz file (lollipop or kitkat)
ps: this method worked for me and i have my phone back, i dont know if it work for you too
ps:if you dont know how to get your battery to 0% just leave it in the phone and it will drain itself(i think)that worked for me
ps2:my english is not good enough so forgive me if i made some mistakes and correct me
Thank you and i hope you can get your phone back too
You don't need to discharge it..
1) take out the battery
2) plug the phone in a PC via micro USB
3) while holding volume up, put in the battery
4) screen whill pop up asking you to hold volume up, relise it and press it agen till you get in download mode.
panagiotisden2 said:
Hi guys i accidently bricked my lg g2 (d620r) trying to unlock my bootloader (i was in official 5.0.2 and i tryed aboot4.img for kitkat) and after a lot of days i finally found out how to unbrick it...
So first you have to make sure the phone's battery is at 0% (you can test this by connecting your phone to your pc with the battery in if it power up without pressing any button then its at 0% if its not then it will do absolutely nothing)
so your phone WILL power up but it will imediately power off again because the battery is at 0% so unplug it and wait till a 0% battery icon appear i the screen
when you see the icon press and hold the volume up button and plug the phone to your pc
now you are in download mode and you can flash a .kdz file (lollipop or kitkat)
ps: this method worked for me and i have my phone back, i dont know if it work for you too
ps:if you dont know how to get your battery to 0% just leave it in the phone and it will drain itself(i think)that worked for me
ps2:my english is not good enough so forgive me if i made some mistakes and correct me
Thank you and i hope you can get your phone back too
Click to expand...
Click to collapse
i have the same problem, but i cannot resolve with this method...
someone tried USB JIG method? it worked? please let me know
ByN3r0 said:
i have the same problem, but i cannot resolve with this method...
someone tried USB JIG method? it worked? please let me know
Click to expand...
Click to collapse
Are you sure that your battery is FULLY uncharged?
panagiotisden2 said:
Are you sure that your battery is FULLY uncharged?
Click to expand...
Click to collapse
my download mode isn't working in any way, i think i should sent it for repair
Thanks !
Thank you !
shalev1418 said:
Thank you !
Click to expand...
Click to collapse
you're wellcome
Did you unbriced your phone easy?
panagiotisden2 said:
you're wellcome
Did you unbriced your phone easy?
Click to expand...
Click to collapse
YUP!
shalev1418 said:
YUP!
Click to expand...
Click to collapse
Ok thank you. Im glad my method works
bartvp said:
my download mode isn't working in any way, i think i should sent it for repair
Click to expand...
Click to collapse
Hello, I am also having the same problem and could not solve = [
many already succeeded with the G2 and the same software used for the g2 min, but lack the file.
http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
could anyone help?
Thank you!
I hard bricked my D620R for the same reason, and was about to send to repair.
Then I tried this way, I waited a day with the battery pulled on, and it got discharged. Finally I was able to get into download mode!
marcio1477 said:
Hello, I am also having the same problem and could not solve = [
many already succeeded with the G2 and the same software used for the g2 min, but lack the file.
http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
could anyone help?
Click to expand...
Click to collapse
You should send it i've done it too. I think your phone is back within 3 weeks
I'm also waiting until my 3 weeks are finished
deviato said:
Thank you!
I hard bricked my D620R for the same reason, and was about to send to repair.
Then I tried this way, I waited a day with the battery pulled on, and it got discharged. Finally I was able to get into download mode!
Click to expand...
Click to collapse
Ιm glad i helped enjoy your phone
bartvp said:
You should send it i've done it too. I think your phone is back within 3 weeks
I'm also waiting until my 3 weeks are finished
Click to expand...
Click to collapse
So can you tell us what the cost is for repair? and if LG said anything about trying to unlock your bootloder/ root it/flashing other roms etc.?
panagiotisden2 said:
So can you tell us what the cost is for repair? and if LG said anything about trying to unlock your bootloder/ root it/flashing other roms etc.?
Click to expand...
Click to collapse
I don't know. I read somewhere that it costs around $30-50. But maybe my warranty isn't void, because they can't check (maybe) my phone is rooted, so it costs nothing.
The only thing I can do is waiting and waiting...
---------- Post added at 07:04 AM ---------- Previous post was at 06:53 AM ----------
marcio1477 said:
Hello, I am also having the same problem and could not solve = [
many already succeeded with the G2 and the same software used for the g2 min, but lack the file.
http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
could anyone help?
Click to expand...
Click to collapse
I will never do this . You only brick it harder i think
HI!
I have D620r. I tryed fw update with LG MobileSupportTool. It stuck at 2, or 3%, never goes up!!
Now, when I try power up, it show only: fastboot operation. I don't have download mode.
I left battery 0%, but this metod don't work too...
It is possible flash stock fw in fastboot mode, or it is bricked?
REQUEST: Can someone who have a bricked device record a video unbricking it with me method, so more users can easily unbrick their devices too just by watching the video tutorial?
Thanks
I tried
I tried to follow your steps but i can go download mode the smartphone start to charge :crying:
help pls
anyone knows how to install a ROM with the phone on scares me turn it off because it was lucky to keep on achieving at the moment is in safe mode
chacks1 said:
anyone knows how to install a ROM with the phone on scares me turn it off because it was lucky to keep on achieving at the moment is in safe mode
Click to expand...
Click to collapse
It's not possible. If you try, ROM's filesystem will replace the files you are using, making the device unusable (soft-bricked).